SP Online - Managed Metadata column Default Value for folders (using CSOM)

Hello,
I am working on setting default values (metadata columns) for different folders on my document library. As so far, I've found solution about how to set default values on whole library and many solutions which works for folders, but not for sharepoint
online (using metadataDefaults object).
The only working solution for folders in SPO I've found is editing file library/Forms/client_LocationBasedDefaults and add some data here.
My question is: is there any easier method to set default values for each folder in document library without manually editing this file?

I second that, I have a client looking to do the same thing but I don't see a way to automate this.

Similar Messages

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

Setting Default values for field using custom.pll

Hi All,
I have an rquirement to set the default values on Meterial Tranasction screen for some condition
I tried it in both ways via Form Personalization and using custom.pll
i m using the following code in custom.pll
form_name      varchar2(30):= name_in('system.current_form');
block_name varchar2(30):= name_in('system.cursor_block');
trx_type           varchar2(30);
subinv                varchar2(30);
begin
if form_name='WIPTXMAT' and block_name ='MTL_TRX_LINE' then
if event_name ='WHEN-VALIDATE-RECORD' then
     trx_type:=name_in('WIPTXMAT.TRANSACTION_TYPE');
if trx_type ='WIP Return' THEN
     copy(10,'MTL_TRX_LINE.TRANSACTION_QUANTITY');
          copy(10,'MTL_TRX_LINE.NUMBER_OF_LOTS_ENTERED');
          sinv:=trim(name_in('MTL_TRX_LINE.SUBINVENTORY_CODE'));
          if sinv is null then
               copy(subinv,'MTL_TRX_LINE.SUBINVENTORY_CODE');
               copy(fr_locator,'MTL_TRX_LINE.LOCATOR');
               FND_MESSAGE.SET_STRING(sinv);
               FND_MESSAGE.SHOW;
          end if;
     end if;
end if;
end if;
end event;
Problem is that default values are getting set but not for all rows . if there are 4 records then values are set for only first 2 rows and if there are 2 rows then defaults are set for 1st row only.
Same behaviour happens when i do it via form personalization
i couldn't understand the behaviour of WHILE-VALIDATE-RECORD event..
Please provide some suggestion on it. its really urgent.
Thanks in Advance
Renu

Works Now...

Get/retreive managed metadata column value from Document Library using SharePoint 2013 JSOM

Hi,
I am trying to retrieve managed metadata column (NewsCategory) value in SharePoint 2013 Document library using JSOM.
I get "Object Object" rather than actual value.
I tried:-
var newsCat = item.get_item('NewsCategory');
alert(newsCat) //Displays [Object Object]
var newsCatLabel = newsCat.get_label();
var newsCatId = newsCat.get_termGuid();
But, I get the error "Object doesn't support property or method get_label()"
I also tried :-
var newsTags = item.get_item(' NewsCategory ');
for (var i = 0; i < newsTags.get_count() ; i++) {
var newsTag = newsTags.getItemAtIndex(i);
var newsTagLabel = newsTag.get_label();
var newsTagId = newsTag.get_termGuid();
Even now I get the error "Object doesn't support property or method get_count()"
I have included " NewsCategory " in the load request:- context.load(items, 'Include(File, NewsCategory)');
Any idea what the issue is? Do I have to add any *.js file using $.getScript?
I added following .js files
var scriptbase = _spPageContextInfo.webServerRelativeUrl + "/_layouts/15/";
$.getScript(scriptbase + "SP.Runtime.js", function () {
$.getScript(scriptbase + "SP.js", function () {
$.getScript(scriptbase + "SP.Core.js", function () {
Thanks in Advance,

Hi Patrick,
I already added those references. I just pasted the parts of script snippet in my initial post. To avoid confusion I am pasting here complete script.
2.1.1.min.js"></script>
<script type="text/javascript">
$(document).ready(function(){
var scriptbase = _spPageContextInfo.webServerRelativeUrl + "/_layouts/15/";
$.getScript(scriptbase + "SP.Runtime.js", function () {
$.getScript(scriptbase + "SP.js", function () {
$.getScript(scriptbase + "SP.Core.js", function () {
function getdata() {
var context = new SP.ClientContext.get_current();
var web = context.get_web();
var list = web.get_lists().getByTitle('Documents');
var camlQuery = new SP.CamlQuery();
var filterCategory = 'Solutions';
var IDfromTaxonomyHiddenList = 15;
camlQuery.set_viewXml('<View><Query><Where><Eq><FieldRef LookupId="TRUE" Name="'+filterCategory+'" /><Value Type="ID">' + IDfromTaxonomyHiddenList +'</Value></Eq></Where></Query></View>');
/*the above CAML query successfully gets all the list items matching the criteria including "NewsCategory" managed metadata column values
But when I try to display the value it retrieved it ouputs/emits Object Object rather than actual values */
var items = list.getItems(camlQuery);
context.load(items, 'Include(File,NewsCategory)');
context.executeQueryAsync(
Function.createDelegate(this, function (sender, args) {
if (items.get_count() > 0) {
var listItemEnumerator = items.getEnumerator();
while (listItemEnumerator.moveNext()) {
var oListItem = listItemEnumerator.get_current();
var file = oListItem.get_file();
var name = file.get_name();
var newsCat = oListItem.get_item('NewsCategory'); alert(newsTags.constructor.getName());
alert(newsCat) //Displays [Object Object]
var newsCatLabel = newsCat.get_label(); // Here it errors out with message "Object doesn't support property or method get_label()"
var newsCatId = newsCat.get_termGuid();
} //end while
}//end if
Function.createDelegate(this, function (sender, args) {
alert('Request failed. ' + args.get_message() + '\n' + args.get_stackTrace());
ExecuteOrDelayUntilScriptLoaded(getdata, "SP.Core.js");
</script>
In the above script "var name = file.get_name(); " gets the exact file name.
But the line "var newsCat = item.get_item('NewsCategory');
alert(newsCat) //Displays [Object Object] rather than actual value.
Issue resolved replace "oListItem.get_item('NewsCategory');" with oListItem.get_item('NewsCategory').get_label();"
Thanks

No values for refiners for managed properties based managed metadata columns in SharePoint 2013 on premise

On a SharePoint Server 2013 setup (on premise) we want to use a number of managed metadata columns in the search as refiner. The managed metadata column is called "Document Language" and so it automatically creates a managed property called owstaxidDocumentx002Language
which I can use to do a keyword query by typing owstaxiDocumentx0020Language:"NL" in the search box and it returns results. I also marked this managed property as refineable (in the service search application) and it appears in the
seach refiners selection box but it states that there are no values for this refiner.
So I decided to create a new managed search property "DocumentLanguage" and maps this to "ows_Document_x0020_Language" - I marked it as queryable, searchable, refineable, retrievable and sortable but this managed search property
is not being filled up.
I already executed a number of full crawls but this does not seem to work. Anyone know what to do next?
Rgds,
Joris [http://jopx.blogspot.com]

It happened with me many times that the automatically generated managed property is not properly mapped to the crawled property and to get the correct crawled property get the document item
$web=Get-SPWeb http://webUrl
$list=$web.Lists["documentLibrary"]
$list.Items[0].Xml>>item.xml
View the item.xml and check if the ows_Document_x0020_Language contains data
Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

Updating a managed metadata column from choice column value

I am trying loop through
all lists in a web, and for each list,
1. create a managed metadata column->Working
2.
Pull value from choice column->Working
3. Move
choice column value to managed metadata column->Not Working
Point number 3 is not working. Please advise
Here is the code:
static void Main(string[] args)
//Pulling the rootweb of the Site
const string SPLocationListColumn = "CHECK6";
SPSite site = new SPSite("http://sp2010:8080");
SPWeb rootweb = site.RootWeb;
//Setting up the taxonomy terstore, termset and term
Microsoft.SharePoint.Taxonomy.TaxonomySession taxonomySession = new Microsoft.SharePoint.Taxonomy.TaxonomySession(site);
TermStore termStore = taxonomySession.TermStores["Managed Metadata Service"];
Console.WriteLine(termStore.Name);
Group group = termStore.Groups["KM Metatags"];
Console.WriteLine(group.Name);
TermSet termSet = group.TermSets["Document Classification"];
Guid termsetid = termSet.Id;
Console.WriteLine(termSet.Name);
Term term = termSet.Terms["Document subclassification"];
TermCollection terms = termSet.Terms;
Console.WriteLine(term.Name);//Looping through all webs of the input website
SPWebCollection collWebsite = site.AllWebs;
for (int i = 0; i < collWebsite.Count; i++)
using (SPWeb oWebsite = collWebsite[i])
//Looping through all lists in web
SPListCollection collList = oWebsite.GetListsOfType(SPBaseType.DocumentLibrary); ;
for (int j = 0; j < collList.Count; j++)
SPList list = collList[j];//if the list name is Documents, create a new field of MMS type
if (list.Title == "Documents")
Console.WriteLine(list.Title);
TaxonomyField field = list.Fields.CreateNewField("TaxonomyFieldType", SPLocationListColumn) as TaxonomyField;
field.SspId = termSet.TermStore.Id;
Console.WriteLine(termSet.TermStore.Id);
field.TermSetId = termSet.Id;
Console.WriteLine(termSet.Id);
field.AnchorId = Guid.Empty;
try
{//Add the newly added MMS field to default view
Console.WriteLine("Entering");
Console.WriteLine("Entering");
list.Fields.Add(field);
Console.WriteLine("Entering");
Console.WriteLine("Entering1");
SPView view = list.DefaultView;
Console.WriteLine("Entering2");
list.Update();
SPViewFieldCollection collViewFields = view.ViewFields;
collViewFields.Add("CHECK6");
Console.WriteLine("Entering3");
view.Update();
Console.WriteLine("Entering4");
catch (Exception e1)
Console.WriteLine(e1.Message);
}//Capture a choice field by name subclass and move it to the newly added MMS field
for (int f = 1; f < list.ItemCount; f++)
if (list.Title == "Documents")
Console.WriteLine(list.Title);
SPListItem item = list.Items[f];
if (item.Fields.ContainsField("subclass"))
SPField field9 = item.Fields["subclass"];
String subclassvalue = field9.GetFieldValueAsText(item["subclass"]);
Console.WriteLine(subclassvalue);
TaxonomyField taxonomyField = item.Fields["CHECK6"] as TaxonomyField;
TaxonomyFieldValue taxonomyFieldValue = new TaxonomyFieldValue(taxonomyField);
taxonomyFieldValue.TermGuid = term.Id.ToString();
taxonomyFieldValue.Label = subclassvalue;
taxonomyField.Update();
item.Update();
list.Update();

From here:
http://www.c-sharpcorner.com/uploadfile/anavijai/programmatically-set-value-to-the-taxonomy-field-in-sharepoint-2010/
taxonomyFieldValue.TermGuid = term.Id.ToString();
taxonomyFieldValue.Label = term.Name;
SPListItem item = list.Items.Add();
# item["Title"] ="Sample";
item["TaxonomyField"] = taxonomyFieldValue;
item.Update();
list.Update();
it appears you're missing the point where you assign that taxonomyFieldValue to the item's taxonomy field in question.

Refiners for managed metadata column

Hi,
I have followed the procedure outlined here to set the search schema for metadata column that I want to show as the refiners:
http://blogs.technet.com/b/sharepoint_made_easy/archive/2013/03/19/step-by-step-configuration-to-add-custom-refiners-in-the-refinement-panel-of-search-results-page-for-sharepoint-online.aspx
My managed property is showing in the available "refiners", however, there are no values returned from it. Please note that I am mapping "RefinableString00" to a managed metadata column crawled property. What am I doing wrong?

Resolved it. i just have to initiate a crawl.

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

How to find if COLUMN DEFAULT VALUE is stored as metadata?

Hello,
I'm using Oracle 11g enhanced ADD COLUMN Functionality. Adding new columns with DEFAULT values and NOT NULL constraint no longer requires the default value to be stored in all existing records.
Sometimes we change DB columns from NOT NULL with DEFAULT to NULL with DEFAULT. This operation "materialize" column default.
Is there an easy way (Dictionary view) how to find, that COLUMN default value is stored as metadata or is "materialized" ?
Thanks. Filip
Oracle RDBMS version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

Thanks for your suggestion, but it is not what i'm looking for :-(
I don't need to find the default value, i need to know how is default value stored. It could be stored in 2 ways.
1. "materialized" - prior to 11G (value is physicaly stored for every column)
2. "as a metadata" - new 11G functionality (default is not physicaly stored and if you query the column DB transalte NULL value to defaut value)
Now I would like to now if my column is type 1) or 2). How can I do it?
Thank you.Filip

Setting default values for a column

Hi,
I have a table having some default values for the columns. I am using a PreparedStatment to insert into this table. For null values I am using setNull(..) method but the default values given for the columns are not inserted for null values.
eg: INSERT INTO TEST VALUES(?,?);
where TEST table contains two columns col1 and col2 with default values 'AA' and 'BB' respectively. My requirement is to make sure that when null values are specified for the columns then the database default should be picked up. using setNull(..) method doesn't help.
Thanks in advance.
Gyan

Default value for a column can be picked up from DatabaseMetaData class.
The below snippet shows that: -
DatabaseMetaData metaData = connection.getMetaData();
ResultSet resultSet = metaData.getColumns(null, null, "TEST", "COL%");
while ( resultSet.next() )
String defaultValue = resultSet.getString("COLUMN_DEF");
String datatype = resultSet.getString("DATA_TYPE");
System.out.println("defaultValue = " + defaultValue);
System.out.println("datatype = " + datatype);
}

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Calling a user defined function as default value for a column

Hi All
Can we call a user defined function as default value for a column ??
for example:
create or replace function test1 return number is
begin
return 10;
end;
create table testt
(id as test1,
name varchar2(20));
getting error:
Error at line 1
ORA-02000: missing ( keywordThanks
Ashwani
Edited by: Ashwani on Jan 16, 2012 1:19 AM

Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Forum Home » Database » SQL and PL/SQL which you can get more quick response
Regard
Helios

Import and default values for columns

Hi guys
I have a table in which there are default values for some columns. I take export of this table.
I go to another database where this table structure is already there (but default values are not set). I run the import of table with ignore=Y. It does all...import the data...create the indexes and all...but doesn't set the default values for the columns.
Shouldn't it do that also ? ignore=Y means that ignore the object creation errors and proceed with the rest of the stuff ? Or there is some problem in my understanding ?
Version 10gR2 on AIX 5.3 and using traditional export/import.
Thanks
Amardeep Sidhu

Hanji Sidhu Sahib.
Mein Tuhade liye eh example try kita hai.
SQL> conn simar/simar
Connected.
SQL> SQL> create table orders (
dept varchar2(20) primary key,
place varchar2(20),
intcol integer default 12
2 3 4 5
Table created.
SQL>
Inserted few values ...........+ commit.
SQL> conn simar/simar
Connected.
SQL> select * from orders;
DEPT PLACE INTCOL
SALES TORONTO 12
HR LA 12
BILLING FLORIDA 12
IT HALIFAX 5
exp simar/simar@RACDB file=exptest.dmp log=exptest.log
rac01:/software/backup>exptest.dmp log=exptest.log <
Export: Release 10.2.0.3.0 - Production on Tue May 6 23:35:58 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SIMAR
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SIMAR
About to export SIMAR's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SIMAR's tables via Conventional Path ...
. . exporting table ABC 12 rows exported
. . exporting table ORDERS 4 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
rac01:/software/backup>strings exptest.dmp |grep -i 'create'
CREATE TABLE "ABC" ("A" VARCHAR2(10), "B" VARCHAR2(10)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
CREATE TABLE "ORDERS" ("DEPT" VARCHAR2(20), "PLACE" VARCHAR2(20), "INTCOL" NUMBER(*,0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING NOCOMPRESS
rac01:/software/backup>strings exptest.dmp |grep -i 'alter'
ALTER TABLE "ORDERS" MODIFY DEFAULT
ALTER TABLE "ORDERS" MODIFY ("INTCOL" DEFAULT 12
ALTER TABLE "ORDERS" ADD PRIMARY KEY ("DEPT") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "USERS" LOGGING ENABLE
SQL> conn simar/simar
Connected.
SQL> drop table orders;
Table dropped.
imp simar/simar@RACDB file=exptest.dmp log=imp_exptest_1.log tables='ORDERS'
rac01:/software/backup>exptest.dmp log=imp_exptest_1.log tables='ORDERS' <
Import: Release 10.2.0.3.0 - Production on Tue May 6 23:46:48 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
. importing SIMAR's objects into SIMAR
. importing SIMAR's objects into SIMAR
. . importing table "ORDERS" 4 rows imported
Import terminated successfully without warnings.
SQL> conn / as sysdba
Connected.
SQL> set heading off;
set echo off;
Set pages 999;
set long 90000;
SQL> SQL> SQL> SQL> SQL>
SQL> select dbms_metadata.get_ddl('TABLE','ORDERS','SIMAR') from dual;
CREATE TABLE "SIMAR"."ORDERS"
( "DEPT" VARCHAR2(20),
"PLACE" VARCHAR2(20),
"INTCOL" NUMBER(*,0) DEFAULT 12,
PRIMARY KEY ("DEPT")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
SQL>
Here the alter table statement is in the dmp file as well as in the imported table.
Regards

Computing default value for column MRU. error.

hi
we moved from apex 3.x to 4.2
AN apex application was working fine..After upgrade it gave error while trying to insert using apex front end
Error computing default value for column Apply MRU.
ORA-06550: line 3, column 46: PL/SQL: ORA-00972: identifier is too long
The PK of the relevant table is based in a sequence.Can i relplace old seq. using new seq...will it help?
When we insert using regular insert statement in sql developer, its fine though.
thanks
kp
Edited by: user8612301 on Mar 15, 2013 7:09 AM

Hi,
Remember the error says "default value". What is your code to set the default value?
I've seen this error before where it was simply a statement like
column = "text123456789012345678901234567890";where the identifier error was given because it should have been
column = 'text123456789012345678901234567890';Since the string doesn't begin with an apostrophe, the parse thinks it's a LONG identifier. Hence, error!
Howard

Default value for a column in Table Control

Hi friends, can i set dinamcally a default value for a column in table control?, this column is check type. This default value must appear in empty rows,
thanks

ADD A MODULE AS Module yyyy In ur PAI.
as
In PAI.
LOOP at itab.
Module YYYY
ENDLOOP.
Module YYYY.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'ITAB-VAL.
      ITAB-VAL = 'XXXXXXXX'        "(DEFAULT VALUE)
      SCREEN-INPUT = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
End module.
*note
make this event work only if the previous column is filled okay.
the display will be in display mode on the screen as screen-input = 0.
see that in the table control u can get the table field for all the rows even though you are processing on some fields .
so what u do is make that particular filed masked(no i/p field and populate the field that will be better instead of populating all the columns okay.
hope this helps you out ,
regards,
vijay.

SP Online - Managed Metadata column Default Value for folders (using CSOM)

Similar Messages

Maybe you are looking for