Sp1 upgrade to R2 and bypass Prerequisite Check

It is possible to disable,bypass or adapt the check?
I want to start with the upgrade R2 in a good working test envoirement. But I get an error:
"You must specify a valid FQDN for the SQL Server computer."
SQL server is installed locally and the services are started with a domain user account.
There is no error in the production envoirement with the same check. So I dont want to spent a lot of time
on this problem.

Log is showing this:
2014 21:16:13> ERROR: getaddrinfo failed with error: 11003.
<04-23-2014 21:16:13> SCCMTST01.XXXX.nl; Validate FQDN of SQL Server Computer; Error; You must specify a valid FQDN for the SQL Server computer.
<04-23-2014 21:16:13> INFO: The rule 'Primary FQDN' has been run on server 'SCCMTST01.XXXX.nl', skipped.
Local rights and sysadmin for computer and domain account are okay.

Similar Messages

Bypass Prerequisits Check errors for packages

Trying to install 11gR2 on a Desktop PC with Debian 'squeeze' (ver. 6) OS . Installed all required packages suggested. However, am now stopped at the Prerequisite Checks mainly because all the package versions listed as errors (29 packages) are more current than those require by the install. I was hoping not to go back, download and install older versions of the packages. Is there a way to bypass these errors?

Hi;
Trying to install 11gR2 on a Desktop PC with Debian 'squeeze' (ver. 6) OS . Installed all required packages suggested. However, am now stopped at the Prerequisite Checks mainly because all the package versions listed as errors (29 packages) are more current than those require by the install. I was hoping not to go back, download and install older versions of the packages. Is there a way to bypass these errors?Debian is not supported, its mean you could hit many error message during installation and also after installation, i suggest use OEL distro(free) instead of Debian
Regard
Helios

Exchange 2010 SP1 Upgrade to SP2 and SP3. Choose language.

Hello.
I going to install Exchange 2010 SP1 multilanguage and then update to SP2 and SP3
But then i download SP2 from Microsoft it's ask fоr choose language.
It ask about installer language or about Exchange language?
What language i need to choose if i have multilanguage Exchange SP1 installer?
And if i want to Exchange EMC be in English and Outlook on client machine shows Russian what language i need to choose when install first role from Exchange 2010 SP1 multilang DVD?

Exchange EMC language depends on OS version where you are running it.
Besides about client language you have to choose Russian language pack during install. More info below...
The language of the Outlook user interface that an Outlook user sees, including the content generated by Exchange, depends on the following:
The language the user is using in Outlook
Whether the language they're using in Outlook is supported by Exchange 2010
Whether the language they're using in Outlook has been configured to be available on the Exchange 2010 server
Consider the following scenarios:
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox and both Outlook and Exchange 2010 support the language the user has specified, <Language A>, the user will see all messages and Exchange-generated
mailbox components, for example, the Inbox, in Language A.
When an Outlook user who's set their language to <Language A> signs in to their Exchange 2010 mailbox that's been set to <Language B>, the Outlook user will see the Outlook user interface in Language A, but will see the content generated
by Exchange. For example, by default, folder names such as Inbox,
Deleted Items, and Sent Items display in <Language B>.
You can change the Exchange mailbox language setting on the server using Exchange Management Console or the Exchange Management Shell. For information about how to use the Shell to change the language setting for a mailbox on a server, see
Set-MailboxRegionalConfiguration.
From: Client Language Support for Outlook -
http://technet.microsoft.com/en-us/library/dd638175%28v=exchg.141%29.aspx
Blog |
Get Your Exchange Powershell Tip of the Day from here

Prerequisite checks fails for the oracle 11g r2 in win7 Ultimate 64-bit

Hi all, I am trying to install Oracle 11 g Release 2 in Windows 7 Ultimate 64-bit and the prerequisite checks are failed.
The checks Physical Memory, Available Physical Memory, Swap size, Free Space: .../temp; and all the other checks also failed.
My laptop configurations are
Processor : Intel Core i-3 CPU
RAM: 4GB
O.S: Win 7 Ultimate Service Pack 1
Do I have to Ignore the checks go head with the installation. Plz let me know.

938825 wrote:
Hi all, I am trying to install Oracle 11 g Release 2 in Windows 7 Ultimate 64-bit and the prerequisite checks are failed.
The checks Physical Memory, Available Physical Memory, Swap size, Free Space: .../temp; and all the other checks also failed.
My laptop configurations are
Processor : Intel Core i-3 CPU
RAM: 4GB
O.S: Win 7 Ultimate Service Pack 1
Do I have to Ignore the checks go head with the installation. Plz let me know.follow Installation Guide
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=

Configuration Manager 2012 SP1 Prerequisite Checker returns "Migration active source hierarchy" error

Hello,
I am getting "Migration active source hierarchy" error in the SCCM 2012 SP1 prerequisite checker on the CM 2012 primary site. The error says "There is an active hierarchy configuration for the migration. Please stop data gathering for each
source site in the source hierarchy." However, actually there is no migration source hierarchy configured and there are no migration jobs displayed in CM 2012 console. We used to configure this feature to migrate CM 2007 to current CM 2012 without service
pack two years ago and we have deleted these configurations.
In migmctrl.log, the following record is being generated every 60 minutes.
======================================================
Connection string = Data Source=xxxxx;Initial Catalog=xxxxx;Integrated Security=True;Persist Security Info=False;MultipleActiveResultSets=True;Encrypt=True;TrustServerCertificate=False;Application Name="Migration Manager".~~ $$<SMS_MIGRATION_MANAGER><04-07-2014
01:01:53.710+300><thread=6992 (0x1B50)>
Created new sqlConnection to xxxxx~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]: Start two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 1. Query the schedule items that was running or requested to start immediately ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.741+300><thread=6992 (0x1B50)>
[Worker]:
Step 2. Query the first item in order of DateNextRun ...~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.819+300><thread=6992 (0x1B50)>
[Worker]:
No item found. Sleep until the next event.~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[Worker]: End two step scheduling
for MIG_Job~~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: the workitem queue is full!~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
[MigMCtrl]: WAIT 3 event(s) for 60 minute(s) and 0 second(s).~ $$<SMS_MIGRATION_MANAGER><04-07-2014 01:01:53.882+300><thread=6992 (0x1B50)>
======================================================
I am not really sure where to look into in this case. I would appreciate any advice.

Hi,
Could you please upload the full migmctrl.log?
How about specifying a source hierarchy with the same name and password of the hierarchy before in the console, then click Clean Up Migration Data?
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Air (13-inch, Mid 2012) (Technical Specifications)
    MacBook Air - model: MacBookAir5,2
    1 1.8 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Mitsumi Electric Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [running]    com.mcafee.menulet.plist [Click for support]
    [running]    com.mcafee.reporter.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
    [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
    [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    TouchP-150M    Application (/Applications/Canon P-150M/TouchP-150M.app)
    iPhoto    Application (/Applications/iPhoto.app)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
    WDSecurityHelper    Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    FUSE for OS X (OSXFUSE) [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    NTFS-3G [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
    Destinations:
        My Passport Edge for Mac [Local]
        Total size: 499.94 GB
        Total number of backups: 27
        Oldest backup: 2013-01-31 21:15:26 +0000
        Last backup: 2015-05-02 11:33:09 +0000
        Size of backup disk: Adequate
            Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    fontd
         2%    VShieldScanManager
         0%    taskgated
         0%    notifyd
Top Processes by Memory: ℹ️
    745 MB    Google Chrome Helper(8)
    439 MB    kernel_task
    246 MB    VShieldScanner(3)
    160 MB    Google Chrome
    127 MB    Finder
Virtual Memory Information: ℹ️
    130 MB    Free RAM
    3.87 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 09:30:08 PM    Self test - passed
    May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
    May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
    May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
    May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
    May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
    May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
    May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
    May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
    May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
    May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
    May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
    May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
    May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
    May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
    May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
    May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
    May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
    May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
    May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
    May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
    May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
    May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
    May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
    May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
    May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
    May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
    Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How do I install upgrades of CS4 package and bypass the installation of older version(s) first?

Hi,
I would like to install the CS4 designing premium upgrade to my new iMac. It's using the new 10.6 OS. My previous Mac 'past away' over three years ago. How do I install upgrades and bypass the installation of older version(s) first? I do owned the full version of each individual software from CS4 designing premium in the past, including the ones Adobe acquired from Macromedia. I also bought and used all the sequential upgrades of each individual software as they came out. However, my purchase of CS3 package came right after my Mac died, so I never register that package's softwares.
Thank you,
George

This forum is for discussing the functionality of these forums, not for discussing other Adobe products and services. I think the place where you should post your question is either in the Create Suites forum:
http://forums.adobe.com/community/creativesuites/version_cue_macintosh

Primary Site Deploy Prerequisite Check Failed

1. Symptom description: check failed
SQL instance when you run the Prerequisite Check SCCM 2012 for a new primary site.
2. Environment: My remote SQL Server 2008 R2 SP1 CU6 and uses
a named instance called INST01 (SRV302 \ INST01). My server will be the primary site watch requirements (SRV501). I
have a VM to test that was used to ratify the SCCM 2012 R2 (vSRV210).This
VM had a primary site that was the basis of data in SRV302 \ INST01, this site has been removed by the Configuration Manager Setup wizard, he correctly remove the database SCCM 2012.
3. The
exact error message: When trying to run the installation of SCCM 2012 server SRV501, filling in as the database and SRV302.domain.com INST01 for instance, it shows the Prerequisite Check Failed one item as:
"Dedicated SQL Server instance: Configuration Manager requires a dedicated SQL Server instance to host excellant site database. You selected the SQL Server instance That site hosts the Configuration Manager
database for another site. Select a different SQL Server instance for this new site to use, or
resolve the conflict by uninstalling The Other excellant site or moving to a different database SQL Server instance. "
In the file ConfigMgrPrereq.log the message is the same:
srv501.domain.com; Dedicated SQL Server instance; Error; Configuration Manager requires a dedicated SQL Server instance to host its site database. You selected a SQL Server instance that hosts the site">"<05/03/2012 10:00:21>
srv501.domain.com; Dedicated SQL Server instance; Error; Configuration Manager requires a dedicated SQL Server instance to host excellant site database. You selected the SQL Server Instance That Hosts the site Configuration
Manager database for another site. Select a different SQL Server instance for this new site to use, or resolves the conflict by uninstalling The Other database excellant site or moving to a different SQL Server instance. "
4. Any
recent relevant configuration change (s): Only completely removed the test site that was with the database in SRV302 \ INST01, rebooted the server and tried to start the installation of the production site using the instance where it was before (no more no
database SCCM it).
5. Tech diagnosis history: Have you tried doing a restart of the server and
the instance of SQL without success. I did a test site to reinstall the test SCCM VM vSRV210, pointing
to the same instance and it works. But the production server 2012 SCCM has to be SRV501. You
can not create a new instance of the database only for the production site.
What can I do to install the SCCM 2012 instance that (SRV302 \ INST01)?
Is there a procedure for cleanup of an instance of SQL for SCCM 2012?
Is there any way to bypass this check in the SQL setup SCCM 2012?
Att. Rodrigo Krug

Hello,
Beware of the solution, after removingthe key
SMS even passed the Prerequisite
Check, but during the installation,
it stopped with the following error:
Can not write CertBootStrap\SMS_SQL_SERVER\ registry
key on server srv.domain.com.
The operating system Reported error
4
ERROR: Failed to write
to registry certificate configurationon server
srv302.domain.com.
ERROR: Failed to create
SQL Server [srv302.domain.com]certificate
remotely.
I had to recreate the keys from the file. Reg
so that the installation was successful.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\CertBootStrap]
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\CertBootStrap\SMS_SQL_SERVER]
No values registered.
With that I succeeded in installing the
primary site in that instance
where we had another base before
SCCM 2012.
This was supposed to be your solution?
Att. Rodrigo Krug

Issue upon upgrading SCCM 2012 rto R2 | Prerequisites failed

Hi,
I'm having this issue upon upgrading our current SCCM 2012 server SP1 to R2. When I reach the prerequisite checker, it fails to detect the User State Migration Tool (USMT) installed, Windows Deployment Tools installed and Windows Preinstallation Environment
installed. I'm guessing that this is because I have the WAIK for Windows 8 and not the WAIK for Windows 8.1. So I followed the instructions from the prerequisite checker and downloaded the latest version of WAIK. When I installed the WAIK for Windows 8.1,
it prompted me that it can't be installed because WAIK for 8.1 is already installed which is kinda weird. So I tried uninstalling WAIK from the server, but I came to this error. ( see image below)
Does anyone know how to get around this problem? This is becoming a showstopper for my upgrade.

When I open the error log, here is what I saw:
I have tried to use an Enterprise account to try to uninstall the WAIK but still it failed.
I followed the workaround provided in the link you sent and I was able to uninstall WAIK. I disjoined the server to AD and uninstalled WAIK. Maybe there is a GPO policy that is blocking the uninstallation.
Thank you very much for your assistance.

SCOM 2012 SP1 Upgrade - RMS fine but can't upgrade reporting or web console

Hi,
We've just upgraded our RMS to SCOM 2012 SP1 and everything went smoothly as per the documentation. However when I next try to upgrade the Reporting or Web Consoles (located on separate servers) to SP1 I am presented with a message saying:
"The management server to which this component reports has not been upgraded".
At that point we cannot proceed past the prerequisite checker.
I am totally confident that the SP1 upgrade went through on the RMS and all file versions are at SP1.
Can anyone help please?
Thanks,
Tim

Hi Retee,
I was not able to find a fix for this but I did find a workaround.
1. I copied the installation files from the SCOM 2012 SP1 DVD/ISO to a folder, SCOM_2012_INSTALL on the reporting server.
2. Browsed to the following folder ..\SCOM_2012_INSTALL\setup\AMD64\ and commented out the following section of the IntermilestoneUpgradePrereqs.xml file:

3. Ran ..\SCOM_2012_INSTALL\setup.exe and the upgrade was successful.
Our SCOM infrastructure has now been at 2012 R2 for a couple of months and I have not seen any issues caused by commenting out this section. But as always, use at your own risk.
Hope this helps.
Thanks,
Iain

Oracle 11g R2 client installation on Windows 7 64 bit hangs after performing prerequisite checks

Windows 7 Professional SP1 64bit OS
6 GB RAM
380 GB free space
Extracted client to C:\Stage\win64_11gR2_client\client
Ran setup.exe as administrator, but the installation always hangs after step 5 of 7 is completed (Perform Prerequisite checks). Install log ends with entry "INFO: Get view named [SummaryUI]"
What am I missing here? Any help would be greatly appreciated.
C:\Stage\win64_11gR2_client\client>dir
Directory of C:\Stage\win64_11gR2_client\client
06/15/2013 02:56 PM    <DIR>          .
06/15/2013 02:56 PM    <DIR>          ..
06/15/2013 02:56 PM    <DIR>          doc
06/15/2013 02:56 PM    <DIR>          install
06/15/2013 02:56 PM    <DIR>          response
06/15/2013 02:55 PM           341,304 setup.exe
06/15/2013 02:55 PM                56 setup.ini
06/15/2013 02:59 PM    <DIR>          stage
06/15/2013 02:55 PM             4,327 welcome.html
               3 File(s)        345,687 bytes
               6 Dir(s) 412,474,404,864 bytes free
Last few lines of install log:
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@75f0f8ff
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from c:\Stage\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/c:/Stage/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Temp\OraInstall2013-06-17_02-55-15PM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\Perl\site\bin;C:\Perl\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\APPS\PuTTY\;C:\Program Files (x86)\IDM Computer Solutions\UltraEdit\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is [email protected]e4b
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\Stage\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: PN-PC:C:\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:5.9491GB (6238064.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: PN-PC:C:\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:130MB
INFO: Actual Value:384.1495GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:64-bit
INFO: Actual Value:64-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:PN-PC
INFO: Expected Value:1023
INFO: Actual Value:369
INFO: -----------------------------------------------
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

Yes, I've tried using the -jreLoc option but it doesn't seem to like the path.
Version 6.0.200.2 is at C:\Program Files (x86)\Java\jre6\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\Program Files (x86)\Java\jre6"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_04-47-16PM. Please wait ...
The Java RunTime Environment was not found at "C:\Program Files (x86)\Java\jre6"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again
I downloaded a newer version to C:\APPS\Java thinking the space in the path for Program Files (x86) might be a problem, but that also fails with the same error message
Version 7.0.210.11 is at C:\APPS\Java\bin
C:\Stage\win64_11gR2_client\client>setup.exe -jreLoc "C:\APPS\Java\"
Starting Oracle Universal Installer...
Checking monitor: must be configured to display at least 256 colors Higher than 256 .    Actual 4294967296     Passed
Preparing to launch Oracle Universal Installer from C:\Temp\OraInstall2013-06-17_05-09-13PM. Please wait ...
The Java RunTime Environment was not found at C:APPS\Java"\bin\javaw.exe. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again

SCCM 2012 R2 Prerequisite Check

Hello
I'm stuck with the installation of SCCM 2012 R2. I get stuck at the Prerequisite Check with the following errors:
1. SQL Server service running account
2. Required SQL Server Collation
3. SQL Server sysadmin rights
SQL 2012 SP1 is installed on the same Windows Server 2012 R2 server that I am trying to install the SCCM 2012 R2 on. I did not use the default instance name during the SQL 2012 SP1 setup and created a name myself. I have also applied SQL Server 2012 SP1
x64 CU9 before I proceeded with the SCCM 2012 R2 setup. I have put in credentials for a service account (Domain Admin) for the five SQL Services (SQL Server Analysis Services, SQL Server, SQL Server Reporting Services, SQL Server Agent, SQL Server Browser).
Is it okay if I use the same service account for all 5 services? I have also turned off firewall and disabled the Windows Firewall Service. Why am I getting error number 1?.
I chose "SQL_Latin1_General_CP1_CI_AS" as server collation during SQL 2012 SP1 setup. If I go to Microsoft SQL Server Management Studio and go to Server Properties, I can see Server Collation is "SQL_Latin1_General_CP1_CI_AS". Why am
I getting error number 2?
I have made the Service Account used for SQL Services, the account used to install SCCM 2012 R2 and also a local group on the same server which has the local computer account to "sysadmin" under Server Roles on Microsoft SQL Server Management Studio.
Why am I getting error number 3?
Can anyone help me out here please?

Hi,
if you setup a named instance, have to configure SQL Server to listen on an static TCP port. (instead dynamic TCP port)
In SQL Server Configuration Manager, expand SQL Server Network Configuration, and then click Protocols for <instance_name>.
Expand Protocols for <instance_name>, and then click TCP/IP.
Right-click TCP/IP,
and then click Properties
In the IP Addresses tab, under IPAll, set TCP Port (1433).

Microsoft Office 2008 SP1 Upgrade Problem

Hi,
I have Office 2008 running perfectly on my computer, and just recently downloaded the two upgrades from the MS website for SP1 12.1.0 and then the latest update for 12.1.3. However, when I install 12.1.0, every time I try to open an MS application, it pops up with the setup assistant, asks me to register, closes, asks to check for updates, and then quits. It won't let any programs run. If I do a fresh install of Office 2008, it works again. The minute I upgrade, it stops.
Any ideas?

I had a problem installing 12.1.3 yesterday and had to completely uninstall MS Office before it would successfully install. I would suggest calling MS Support, they will coach you on the correct way to fully uninstall Office 2008 and then assist on how to install it so the update works. It took me about 40 minutes on the phone yesterday but it was solved. The phone number I used was (866) 474-4882.
Gotta love Microsoft software...not!

SCOM 2012 SP1 Upgrade

Hello,
I have a SCOM 2007 R2 CU7 server that I upgraded to SCOM 2012. I am running Windows Server 2008 R2 SP1 and SQL Server 2008 R2 SP2. I tried twice to upgrade it to SCOM 2012 SP1 and it failed both times. In the OpsMgrSetupWizard.log file,
I see this error:
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value to enable this feature.
See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
Incorrect syntax near the keyword 'AND'.
Incorrect syntax near the keyword 'THEN'.
[10:58:04]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[10:58:04]: Error: :RunStandardScripts failed with the following exception: : Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[10:58:04]: Error: :StackTrace:   at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Delegate.DynamicInvokeImpl(Object[] args)
   at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.Action.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
   at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.InstallStep.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
[10:58:04]: Error: :Inner Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131604, Exception.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value
to enable this feature. See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
Incorrect syntax near the keyword 'AND'.
Incorrect syntax near the keyword 'THEN'.
After both failed upgrades, I had to re-install SCOM 2007. How can I get the upgrade to complete? The prerequisites have been installed.

So try to change the SQL database Compatibility Level to SQL 2008 (100):
1. Open SQL Server Management Studio
2. Connect to the SQL server hosting the Operations Manager Databases
3. Expand Databases, Right Click on OperationsManager and click properties
4. Click Options, Change the Compatibility level: drop down to SQL Server 2008 (100), Click OK
5. Right Click on OperationsManagerDW and click properties, Click Options
6. Change the Compatibility level: drop down to SQL Server 2008 (100), Click OK
Niki Han
TechNet Community Support

OS X not booting after Vista SP1 upgrade

Ok, so I have this really bad problem with my OS X drive.
It's stuck at the grey screen with the loading thing continuously loading without starting OS X.
This all happened after I upgraded my Vista to Service Pack 1.
When going back to Vista a pop-up appeared (from Mac Drive 7).
http://img180.imageshack.us/img180/2734/capturehu8.jpg - The Pop-up.
Also had a pop-up that said the drive was corrupt.
I've tried using my Leopard install Disc to use Disk Utility, but it can't verify/check or repair my OS X drive.
Tried to reinstall OS X, but it asks me where I want to install it on, but doesn't show me any partition.
Now what can I do to fix it? (preferably without erasing anything)
Also, I've been thinking about completely removing OS X and replacing it with Vista...is it possible and could I still reinstall OS X later if I wanted to?

I've read bad reviews of MacDrive causing corruption.
I use Ultimate and its complete backup PC and file backups so covered there. And same for OS X with multiple SuperDuper clones along with a TimeMachine backup. Covers that side.
Vista SP1 needed to move files around a lot and some 5-7GB (depends on version etc) temp space during the process. So I ran CHKDSK and System File Checker before hand. And boot from Vista DVD and see if you can do anything if those two don't help.
One of the biggest problems is getting too low on disk space.
For OS X, I swear by Disk Warrior 4.1. I would install OS X on an external drive rather than use the DVD, make it your "emergency boot drive" and run DU and Disk Warrior from there.
Those that have backups are ready. And always backup your OS X volume before you apply updates and patches on it as well. You may never need to if you plan for and do some maintenance.
I'd dump MacDrive though. And for OS X, I feel safe / okay with NTFS from MacFUSE 3G.

Sp1 upgrade to R2 and bypass Prerequisite Check

Similar Messages

Maybe you are looking for