SP11 Upgrade Post Activities

Hi Experts,
We are Upgrading our ECC 6.06 System to SP11 Stack Upgrade, Normally we run SGEN After Support Package Upgrade.
Can you please suggest what other post activities we should run in ECC System after SP11 Upgrade.
Regards,
Shivam

Hello Shivam,
Before applying SP....Please export parameters list from T-code->TU02 & post completion compare with fresh report of TU02.
You will notice diffrences
Regards
S. BASIS

Similar Messages

Questions on previous Yosemite upgrade posts

I had the following questions on previous Yoemite upgrade posts:
1. how do you acquire and make a bootable thumb drive installer?
2. how do you boot the system in safe mode?
3. what applications and versions of these are Yosemite compatible?
4. if an upgrade is required how do you get it? I realize that this will be application dependent?
Thanks.

I would go with Niel's suggestion for question 1 as the program will do all the work for you.
Bootable USB Flash Drive – Diskmaker X
Safe Mode - About
Safe Mode - Yosemite

SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE due to inactive object

Hi ,
SP11 upgrade is stuck in Pre-Processing phase MAIN_INIT/REPACHK_CLONE with the following errors
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
REPACHK ERRORS and RETURN CODE in GET_INACTIVE_SAP_OBJECTS.SMG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ETG040 Start time.....: "17.06.2014" "00:13:43"
4 ETG039 -------------------------------------------------------------------------
4 ETG010 "533 inactive objects found" " " " " " "
4 ETG010 "257 inactive SAP objects" "colliding with import queue found." " " " "
4 ETG010 "Please contact the development team" "to either activate or discard the inactive object." " " " "
2EETG010 "The following objects are inactive" "in the system:" " " " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCDEF" " "
2EETG010 "LIMU" "CINC" "/1WDA/CASTANDARD==============CCIMP" " "
2EETG010 "LIMU" "CINC" "/1WDA/CBUSINESS_GRAPHICS======CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_AC_CUSTOM_TEMPLATE=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_AC_MO_TEMPLATE=============CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CPUB" "CL_AC_MO_TEMPLATE" " "
2EETG010 "LIMU" "CINC" "CL_AC_TEMPLATE_REPOSITORY=====CCAU" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "LIMU" "CINC" "CL_AI_SC_REFRESH==============CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_GENERIC_DATALOADER=========CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCAU" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCDEF" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCIMP" " "
2EETG010 "LIMU" "CINC" "CL_WDR_ESCAPE=================CCMAC" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPRO" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_ESCAPE" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCDEF" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCIMP" " "
2EETG010 "LIMU" "CINC" "CX_SYSTEM_READ_ERROR==========CCMAC" " "
2EETG010 "LIMU" "CLSD" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRI" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPRO" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CPUB" "CX_SYSTEM_READ_ERROR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPRI" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_AC_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_INCIDENT_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPRO" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CPUB" "CL_AC_METRIC" " "
2EETG010 "LIMU" "CLSD" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_NOTIFICATION_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_REACTIONS_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CPUB" "CL_AC_SE61_DOC_MANAGER" " "
2EETG010 "LIMU" "CLSD" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CPUB" "CL_AC_TEMPLATE_FACTORY" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_DVM_SCH_ASSISTANCE" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CLSD" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CLSD" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "CPUB" "CL_AI_CRM_CPY_PROCTYPE_SERVICE" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM008" " "
2EETG010 "LIMU" "METH" "CL_AI_CRM_CPY_PROCTYPE_SERVICECM009" " "
2EETG010 "LIMU" "CLSD" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CLSD" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CPUB" "CL_ALERT_CONSM_CONSTANTS" " "
2EETG010 "LIMU" "CLSD" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CPUB" "CL_BUFFERS_FORCC" " "
2EETG010 "LIMU" "CLSD" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CLSD" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_DATA_VOLUMES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_EXTRACTOR" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INDX_SERV_HEAP" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_INTERNAL_EVENTS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_MEMORY_STATISTICS" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_RESOURCE_UTILIZAT" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_DBH_VOLUME_FILES" " "
2EETG010 "LIMU" "CLSD" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CLSD" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CLSD" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CLSD" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CLSD" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CLSD" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CLSD" "CX_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_AC_METRIC_REPOSITORY" " "
2EETG010 "LIMU" "CPRI" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRO" "CL_AC_TEMPLATE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_CRM_CPY_PROCTYPE" " "
2EETG010 "LIMU" "CPRI" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPRI" "CL_ALRT_SELF_MON_LANDSCAPE" " "
2EETG010 "LIMU" "CPRI" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPRI" "CL_E2EEFWK_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_E2E_DPC_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRI" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRI" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPRI" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPRO" "CL_AC_ASSIGNMENT_REPOSITORY" " "
2EETG010 "LIMU" "CPRO" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPRO" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPRO" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPRO" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SD_ADAPTER_TOOLS" " "
2EETG010 "LIMU" "CPUB" "CL_AGS_SERVICE_ENGA" " "
2EETG010 "LIMU" "CPUB" "CL_AI_SDK_SP_SUSER" " "
2EETG010 "LIMU" "CPUB" "CL_DSWP_NA_NOTIF_ADMIN" " "
2EETG010 "LIMU" "CPUB" "CL_E2E_TWB_EXTRACTOR" " "
2EETG010 "LIMU" "CPUB" "CL_GENERIC_DATALOADER" " "
2EETG010 "LIMU" "CPUB" "CL_HDB_RDI_META" " "
2EETG010 "LIMU" "CPUB" "CL_LMDB_CS_UTIL" " "
2EETG010 "LIMU" "CPUB" "CL_SISE_MAIN_ASSIST" " "
2EETG010 "LIMU" "CPUB" "CL_SMSY_OPPHASE_GROUP_EDITOR32" " "
2EETG010 "LIMU" "CPUB" "CL_SM_E2EREP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_SVCP_SETUP" " "
2EETG010 "LIMU" "CPUB" "CL_WDR_TEXT_FORMATTER" " "
2EETG010 "LIMU" "CPUB" "CX_E2E_DPC_SETUP" " "
2EETG010 "R3TR" "ENHO" "AGS_GET_JOB_DOC_ATTR" " "
2EETG010 "LIMU" "FUNC" "AGS_DSWP_SOLMAN_INFO" " "
2EETG010 "LIMU" "REPS" "LAGS_DSWP_REPORTING$01" " "
2EETG010 "LIMU" "FUNC" "AGS_SISE_MANU_NOTE_ACTS" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTIL$02" " "
2EETG010 "LIMU" "REPS" "LAGS_SISE_UTILF07" " "
2EETG010 "LIMU" "REPS" "SAPLAGS_SISE_UTIL" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_DB_UPDATER_REMOTE" " "
2EETG010 "LIMU" "FUNC" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "FUNC" "SMD_DATA_LOADER_ALM" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$28" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOAD$32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADF01" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADU32" " "
2EETG010 "LIMU" "REPS" "LSCSM_BI_DATALOADV28" " "
2EETG010 "LIMU" "FUNC" "DSWP_CI_GET_OBJECTS_BY_GUID" " "
2EETG010 "LIMU" "FUNC" "DSWP_CREATE_SOLUTION" " "
2EETG010 "LIMU" "FUNC" "E2E_STAPI_EXTRACTOR_CE2_V2" " "
2EETG010 "LIMU" "REPS" "LE2E_FUNC$33" " "
2EETG010 "LIMU" "FUNC" "E2E_TWB_POST_DATA_LOADER" " "
2EETG010 "LIMU" "FUNC" "FM_UPD_DELIVERY_AFTER_IMPORT" " "
2EETG010 "LIMU" "REPS" "LAI_UPDATE_CONTENT$01" " "
2EETG010 "LIMU" "FUNC" "SMSU_CREATE_TEMP_RFC" " "
2EETG010 "LIMU" "FUNC" "SMSU_MANAGED_SYSTEM" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$03" " "
2EETG010 "LIMU" "REPS" "LSM_SETUP_API$04" " "
2EETG010 "LIMU" "FUNC" "SMSY_GENERATE_RFCDEST_W_USER" " "
2EETG010 "LIMU" "REPS" "LSMSY_GENERATE_RFCDEST$07" " "
2EETG010 "LIMU" "FUNC" "SOLAR_BUSINESS_CONT_DISP_ALV" " "
2EETG010 "LIMU" "REPS" "LSOLAR05$33" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_ECTC" " "
2EETG010 "LIMU" "FUNC" "STREE_GET_STEXT_FOR_RTYPE_TWBC" " "
2EETG010 "R3TR" "INTF" "IF_ACE_METRIC_EVENT_FILTER" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IF_AC_TEMPLATE_REPOSITORY" " "
2EETG010 "R3TR" "INTF" "IF_AI_SC_UTIL" " "
2EETG010 "R3TR" "INTF" "IF_ATW_METRIC" " "
2EETG010 "R3TR" "INTF" "IF_E2E_EFWK_SETUP" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_CC_INCIDENT_DETAILS" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_INCIDENT_FAVOURITES" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_RBE_IMPORT" " "
2EETG010 "R3TR" "INTF" "IWCI_AGS_WORK_DVM_SCH_ANALYSIS" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_TABLE_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_POWL_UI_COMP" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_ALRT_SELF_MON_OVRVIEW" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_CONFIG_WIZARD" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_ALERTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DATA_PROVIDER" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_DFLT_TEMPLATE" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_HIERARCHY" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_INCIDENT" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRICS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_METRIC_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_MONOBJ_DETAIL" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_NOTIFICATION" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_REACTIONS" " "
2EETG010 "R3TR" "INTF" "IWCI_WDC_MAI_REP_RULE_TYPE" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_ALRT_MEADEF_CTS" " "
2EETG010 "R3TR" "INTF" "IWCI_WD_SISE_CUSTOM_TMPL_CONF" " "
2EETG010 "LIMU" "METH" "CL_ALERT_HTML_REPORT_GENERATORCM002" " "
2EETG010 "LIMU" "REPS" "AI_BPMON_FIX" " "
2EETG010 "LIMU" "REPS" "AI_CRM_IM_UPDATE_FROM_SAP_C01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_F01" " "
2EETG010 "LIMU" "REPS" "AI_SDK_SP_GENERATE_BP_V2_TOP" " "
2EETG010 "LIMU" "REPS" "CCMSBI_GEN_TESTDATA_SETUP" " "
2EETG010 "LIMU" "REPS" "CRM_DNO_SERVICE_MONITOR" " "
2EETG010 "LIMU" "REPS" "LDSWP_BPM_FUNCF08" " "
2EETG010 "LIMU" "REPS" "RLMDB_TECH_SCEN_DUAL_STACKS" " "
2EETG010 "LIMU" "REPS" "WDAL_URD2_BUSINESS_GRAPHICS" " "
2EETG010 "LIMU" "WAPP" "BSPWD_BASICS SCRIPTS.JS" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_DELTAHANDLIN" " "
2EETG010 "LIMU" "WAPP" "THTMLB_SCRIPTS SCRIPTS_KEYBOARD.JS" " "
2EETG010 "LIMU" "WDYC" "AGS_CC_INCIDENT_DETAILS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_INCIDENT_FAVOURITES COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_RBE_IMPORT IMP_FLOW_CONTROLLER" " "
2EETG010 "LIMU" "WDYC" "AGS_WORK_DVM_SCH_ANALYSIS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_DVM_SCH_ANALYSIS V_SCOPE_SEL" " "
2EETG010 "LIMU" "WDYC" "POWL_TABLE_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "POWL_UI_COMP COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_ALRT_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_ALRT_SELF_MON_OVRVIEW COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_CONFIG_WIZARD COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_CONFIG_WIZARD MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_ALERTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_ALERTS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DATA_PROVIDER MGVARIANTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER METRIC_GROUP_VARIANT" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_DATA_PROVIDER PARAMETERTABLE" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_DFLT_TEMPLATE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_HIERARCHY COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_INCIDENT COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_INCIDENT MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRICS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_METRIC_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_MONOBJ_DETAIL COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_MONOBJ_DETAIL MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_NOTIFICATION COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_NOTIFICATION MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_REACTIONS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_REACTIONS MAIN" " "
2EETG010 "LIMU" "WDYC" "WDC_MAI_REP_RULE_TYPE COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "WDC_MAI_REP_RULE_TYPE MAIN" " "
2EETG010 "LIMU" "WDYC" "WD_ALRT_MEADEF_CTS COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYC" "WD_SISE_CUSTOM_TMPL_CONF COMPONENTCONTROLLER" " "
2EETG010 "LIMU" "WDYV" "AGS_DVM_AFWK_LOG_VIEWER MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_INCIDENT_FAVOURITES VWWATCHLIST" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_AS VW_AS_TREE_TABLE" " "
2EETG010 "LIMU" "WDYV" "AGS_RBE_IMPORT V_LOG_COMP_MAP" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_CHANGE_REQS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_ISSUES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_MSGS_EODS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PARENT_OBJS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_PROCESS_INFO" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_SERVICES" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT VW_TAB_TASKS" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_ESD_ISSUE_MGMT WND_MAIN" " "
2EETG010 "LIMU" "WDYV" "AGS_WORK_SERVICES_ENGAGE VW_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_OPERATION_CENTER V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AICCMSBI_TWB_SETUP V_MAIN" " "
2EETG010 "LIMU" "WDYV" "AI_SERVICE_CONNECTIONS TREE_CONTROL" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER" " "
2EETG010 "LIMU" "WDYV" "POWL_UI_COMP POWL_MASTER2" " "
2EETG010 "LIMU" "WDYV" "WDC_ALERT_GROUP_DETAILS EVENT_GROUP_VIEW" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_CUSTOM_AGS V_BW_SYSTEM" " "
2EETG010 "LIMU" "WDYV" "WD_SISE_SS_GUID_PROC GENERIC_POPUP" " "
Any help to fix this issue.
Rg,
Karthik

Hello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB

Re: Pre & Post activities for homogeneous system copy

Dear All,
can any body help with pre & post activities for homogeneous system copy
Thanks in advance
Best regards,
khan

Hi,
Use Oracle Database specific method to perform homogeneous system copy.
Along with this reference official [system copy guide|https://websmp209.sap-ag.de/~sapidb/011000358700000416402008E.PDF], You can also refer this [useful doc|http://www.basisconsultant.com/component/remository/Sytem-Copy-Guides/Homogeneous-System-Copy-using-OnlineandOffline-Backup/] for the same to have all required pre-post activities information with more details.
Regards,
Bhavik G. Shroff

Modify Form in the "Posts-Activities-Notes"

Hello,
Our user would like to modify to add more field into the Phone Call form that we can access from the "Posts-Activities-Notes" tab. I have not yet found a way to do this.
Is this possible?
Appreciate your suggestion.
Thanks,
-tri

Hello,
Unfortunately that dorm is not customizable.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

Post activities after Updated to SP10

Hi Friends,
Can any one guide me the post activities to be done after application of SP10.
Thanks,
Satyabrat

Satyabrat,
SP10 is the same as any other support pack.
You can find a support pack install guide here:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c0f0e585-1f57-2b10-ac80-8f6c37b9453a
Thanks!
Ankur
SAP GRC RIG

Post activities afer system upgrade

Dear all my Friends,
We are now going to upgrade our R/3 4.6 C to ECC 6.0,
what should i do after technical team finish their technical upgrade !?
thanks !

N/A

Support pcck upgrade Post Validtion

Hi Experts,
we are upgrading support pack from level 19 to 21 for BW 3.5 systm , what are the post validation steps i.e testing required for any support packge upgrade.
Thanks
DB

Hi,
First prepare a test script for this.
All the testing is done to ensure that everything is working fine in the system. Two things should be taken care of. One will be that all those processes which where happening without any issues previously shoule be fine and secondly if there was some corrections that went in with this upgrade thats should also be checked.
You need to test if the extractions are working fine, data is getting loaded into targets, post load activities like activation, rollup, compression etc are successfull etc.
We test the PC chains also.
We schedule / trigger the chains and monitor them. We ensure that all the process types are happening successfully.
Also in cases where we use events/third party shceduling tools to trigger BW chains we check that out.
Executing reports to check if run time has changed or not.
Also activities like Change runs,Deletion , Selective deletion etc are done.
Also the delta queues, TRFCS, IDOCS etc are need to be monitored.
Refer.
Re: Quality System
Re: bw developer_unit_integration_testing
Integration Testing
http://www.sap-img.com/general/role-of-sap-consultant-in-testing.htm
integration testing
SAP testing
SAP Testing
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e5d8d390-0201-0010-e284-e418e3f0e150
Can any one explain about the SAP Testing process in Implementation Project
BI 7.0 Testcases
/thread/796460 [original link is broken]
JituK

RFC does not work after SP11 upgrade

Hi girls and guys,
I just upgraded our system to WAS6.40 SP11 from SP09. Surprisingly enough, my WD application which accesses 4.6C system now stops working. There was a problem with the two JCO connections after the upgrade, and finally I made them working with a service user.
However, there is still a problem which shows an error "The function module "DD_DOMA_GET" not released for 'remote' calls." This FM is never used anywhere in my app, and I ever did not know its existance before the error occurred.
Have any of you seen this error before? and how could i fix it?
Thanks in advance!
Regards,
Hart

Hi Marco,
The Product Availability Matrix will answer your question: https://websmp106.sap-ag.de/pam.
Cheers,
Jonathan

ESS SP11 upgrade error in travel request

Dear All,
We have recenlty up graded to ESS-SP11 package, The intial travel request is coming. But When I click on "dditional destination" or "Review" button , The following dump is coming.
The same is happening in travel expense as well.
The error is:
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.aii.proxy.framework.core.DataAccessException: Type conversion error, field TAX_PER_DIEMTAX, complex type class com.sap.xss.tra.tre.model.expenses.Ptrv_Web_General_Data_Int
    at com.sap.aii.proxy.framework.core.JcoBaseTypeData.propagateJcoException(JcoBaseTypeData.java:130)
    at com.sap.aii.proxy.framework.core.JcoBaseTypeData.setElementValue(JcoBaseTypeData.java:751)
    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.setAttributeValue(DynamicRFCModelClass.java:482)
    at com.sap.tc.webdynpro.progmodel.context.GenericModelClassCopyHelper.setAttributeValue(GenericModelClassCopyHelper.java:69)
    at com.sap.tc.webdynpro.progmodel.context.CopyService.copyCorresponding(CopyService.java:55)
    ... 66 more
See full exception chain for details.
Any quick help would be surely awarded with good points.
Sandeep Kulkarni.

Probably, your backend is not compatible anymore with your Portal.
You may need to upgrade your SAP_HR and EA_HR support packages.

BPC 7.5 MSFT SP05 to SP11 upgrade

Hi BPC Experts,
We are running SAP BPC 7.5 SP05 (7.5.106.00) on Microsoft environment and will soon upgrade BPC to 7.5 SP11 (7.5.112.00).
I understand Service Pack 11 is cumulative but what about patch “7.5M SP11 Patch 5”? Are also patches cumulative so I just have to install that patch5 and not patch1,2,3,4,5?
After we have upgrade test server, will we still be able to restore applicationSets from production (BPC 7.5 SP5) to test server (BPC 7.5 SP11) even though BPC version differs?
I understand there is no way to revert back to BPC 7.5 SP5 in case we face issues after the upgrade to BPC.5 SP11. Correct?
In case we have to go back to previous version (BPC 7.5 SP5) we have to uninstall BPC application and reinstall BPC SP5?
So, in the process of uninstalling BPC, all applicationSet related data will remain such as SQL databases, OLAP and fileDBs, webfolders etc and I can just install BPC 7.5 SP5 again without any reconfiguration?
In SAP note 1803261 (7.5M SP11 Central Note) they mention “When restoring an application set after BPC 7.5M has been upgraded to this version, you must recreate the partition if an application has a custom OLAP partition”.
How can I tell if we have a custom OLAP partition?
Thankyou and best regards,
Jonas

Hi Jonas,
I understand Service Pack 11 is cumulative but what about patch “7.5M SP11 Patch 5”? Are also patches cumulative so I just have to install that patch5 and not patch1,2,3,4,5?
normally the last one includes the others but if you look on the right link "info" for the patch you will found (sometimes just link to a note) the list of the notes and patch included. I think the last is pacth 6
After we have upgrade test server, will we still be able to restore applicationSets from production (BPC 7.5 SP5) to test server (BPC 7.5 SP11) even though BPC version differs?
there aren't changes in the structure\tables so you should be able to restore the appsets in the new version.
I understand there is no way to revert back to BPC 7.5 SP5 in case we face issues after the upgrade to BPC.5 SP11. Correct?
In case we have to go back to previous version (BPC 7.5 SP5) we have to uninstall BPC application and reinstall BPC SP5?
So, in the process of uninstalling BPC, all applicationSet related data will remain such as SQL databases, OLAP and fileDBs, webfolders etc and I can just install BPC 7.5 SP5 again without any reconfiguration?
bpc don't give you the possibility of downgrade the version but the basis can do a snaphot before to start the upgrade and if not ok they can go back immediately to sp5 (before to do this it's better to understand where is the issue and eventually ask a SAP help).
In SAP note 1803261 (7.5M SP11 Central Note) they mention “When restoring an application set after BPC 7.5M has been upgraded to this version, you must recreate the partition if an application has a custom OLAP partition”.
How can I tell if we have a custom OLAP partition?
your basis should know if they have do an OLAP customization, if so you will loose the customizing and they should repeat it again on the new version.
After the upgrade don't forget to process all dims, to do a modify application also recreating the OLAP of all your applications and to do a full optimize.
Regards
Roberto

ECC 6.0 Upgrade posting issue.

Hi,
Recently we have upgraded to ECC 6.0 from ECC 5.0. After running the payroll in ECC 6, we have a done a simulation in posting.
Got an error "Incorrect documents" . i went to the check the error in detail. below mentioned is the error.
Balancing field "Profit Center" in line item 001 not filled.
The posting was ok in ECC 5.0.
In ECC 6.0 it is throwing the error.
Many Thanks
Swetha

Hi Ted,
I am talking about GB payroll, so we have to defnitely maintain the tax wagetypes in the new table V_T7US3PRTXSYMKO. Apart from that do we need to do any other settings in FI. Because it is showing the Profit center not filled.
We have also maintained the v_t52swcodist .
-Swetha

Lenovo P780 Kitkat 4.4.2 upgrade: Post problems and changes

1. New security system ( neither can be uninstalled nor disabled) actually speaking it is annoying to me. Now a days it is asking for Money Rs.53 for 30 days.
2. Very bad UI ( had to install NOVA Launcher to change it )
Does anyone know how to uninstall Lenovo Security. Please help me i dont want it anymore.

SecureIT is a completely free app.
The problem you are describing(virus database upgrade fee) is usually related with improper SU binary installation (rooted device loosing root access>CWM/TWRP re-rooting).That's why I asked about root access.In that case the solution was to uninstall and reinstall the app (ROOT needed).
The funny thing is that if you want to remove it you have to root the phone.
Rooting instructions HERE.
Important:If you remove SecureIT you won't be able to install future OTA updates.Suggest ''freezing'' it (ROOT needed).
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Post activities in Bacflush

HI PP Gurus,
In repetative manufacturing if sufficient stock is not present in the desired location system will post the GR but for the GI system posts in the postprocessing, In that case system is not allowed to do the activity posting for that perticular planned order. Hence GI can be done through COGI but in that i canot do the activity posting,
There is a seperate tab for the activity posting in MFBF screen, is there is any provision to post "Postponed" activities other than MFBF.
Thanks
ACP

Hi ACP,
To answer to your quastion, I don't think there is any transaction through which you can process both activity and components (as far as I know).
There can be 2 approach to this:
Allow -ve posting in storage location so that it will consume components on the planned order confirmation. You need to replenish these stocks before month end as 'no -ve stock' is prerequisite for month end process.
Do only activity posting in the planned order confirmation and correct goods mocement in MFBF.
Hope this help.
Thanks
Ashutosh

BW 7.0 to 7.3 upgrade-Post upgrade activity and Transport the changes

Hi Experts,
We have upgraded our BW system from Release 7.0 to 7.3. As part of Security post upgrade activity I ran Migration steps,
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3. and later SU25 steps too.
I fixed the Roles appeared in SU25 Step 2C and made below Characteristics as auth relevant,
0TCAACTVT
0TCAIPROV
0TCAVALID
But I have few doubts before Quality movement,
1) Do I need to Run the Migration steps again in Quality and Production?
RSECADMIN-Extras->Migrations->Migration:Release 7.0 to Release 7.3
2) Do I need to transport only above Characteristics to Quality and Production or need to transport all the Characteristics and Analysis Authorization?
3) How to transport Characteristics?
Please provide your views.
Regards
Parag

Hi,
Technically its possible but it has its own consequences again based on the kind of object that you are going to Tranport.
The above statement is applicable considering that you have 3.x flow in Bi7.0 system and with no DTP's or transformation etc...
And if the BI7.0 is Unicode and 3.5 system is non-unicode then you will have lot of issues and most of the times you need Basis help to resolve the issues. So its bit risk to move the transport this way.
So its better to develop the objects once again in 3.x system and then transport from D to Q and to P as a standard practice.
Hope this helps.
Murali

SP11 Upgrade Post Activities

Similar Messages

Maybe you are looking for