SP12: Auto-provisioning failed for role with action "keep"

Hi,
If you want to keep an exisiting role for a user in CUP. It wasn't possible to change the validity of the role. Therefor you have to set parameter 145 value to 1 in database table VIRSA_AE_ERMCONFIG and refresh cache in CUP(solution with SP11).
But know we have problemes with the auto-provisioning.
We can enter the other validity of the role and after that the request provisioning failed. In our workflow the request rerouted to the admin because of escape-route settings. All other new roles in the request are assigned well to the user in the backend system.
Any ideas?
Many thanks,
Alexa

Hi,
we actually have the same Problem, that changes to the role validity with action "keep" are not provisioned to the SAP system.
If it is only possible to change the validity with the action "add" it is not possible to limit the validity of a previously unlimited role. Because as you said another role with the new validity dates is simply added to the existing roles.
The only workaround would be to delete the old role and add a new one with new validity dates. But in my opinion this workaround is not acceptable for the users.
Best Regards
Jonas

Similar Messages

Role Provisioning failed for System(s) : Connector Name . Error Message : malformedRequest

Hi Everyone we are facing following issue in GRC-SAC-SAE 5.3_16.3. So far our CUP was connected to Enterprize portal (7.01) and auto provisioning for group to users worked. However now it is not working with below error.
Role Provisioning failed for System(s) : <Connector Name>. Error Message :
malformedRequest
Failed request now
Successful request used to provision
Regards,
Arpan Paik

Arpan,
We used to get those "malformed request" errors. We dealt with them by requesting the portal to be re-booted during the weekend maintenance window, making the portal security changes manually, cancelling the CUP request and notifying the requester. It's not a great solution, I know, but it was all we could come up with at the time. Then they upgraded the portal to NW 7.31, which is incompatible with GRC 5.3, and we have to do everything manually, so our situation went from bad to worse. Good luck!
Cheers,
Gretchen

Hostname Verification failed for certificate with CommonName 'gawlsdev02.ss

Hi All,
I want to know the meaning and the reason of this exception:
<Jun 17, 2010 2:05:52 PM EDT> <Warning> <Security> <BEA-090504> <Certificate chain received from gawlsdev02 - 147.141.83.104 failed
hostname verification check. Certificate contained gawlsdev02.ssga.statestr.com but check expected gawlsdev02>
<Jun 17, 2010 2:05:52 PM EDT> <Debug> <TLS> <000000> <Hostname Verification failed for certificate with CommonName 'gawlsdev02.ssga.
statestr.com' against hostname: gawlsdev02>
thanks in advance.

When Webloigic Server tries to validate the certificate, it compares te CN of the certificate with the hostname from where the request is coming from.
If they don't match, hostname verfication fails and SSL connection is not established.
In your case I see the CN is gawlsdev02.ssga.statestr.com whereas WLS is expecting it to be gawlsdev02.
U can use this option to ignore host name verification
-Dweblogic.security.SSL.ignoreHostnameVerification=true
To know about other SSL issues, u can refer this
http://weblogic-wonders.com/weblogic/2010/01/28/troubleshooting-ssl-issues/
-Faisal

Provision failed for Wordpress

I am getting provision failed consistently when trying to create an Azure Wordpress website. I have done this in the past and it worked and my account still has 22 days on the free service. I deleted the website and try again and now it fails.
However the MySQL db is still there.
Please help

Hi,
If you create a new azure website with the same name you created, please follow this thread to fix this error "Provision failed", please have a look at this thread:
https://social.msdn.microsoft.com/Forums/en-US/a591513c-6451-4f20-9609-2bbafb17a3a2/fixing-provisioning-failed-errors-in-azure-websites?forum=windowsa, hope this could give you some help.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Open multiple PDFs in Photoshop at specific size for use with Actions

I am having a bit of a roadblock with batch Automate in Photoshop. I'd like to open multiple PDFs at 630p x 630p, 72 dpi in greyscale. I have 2000 files to do this on. If files are already open, the rest of my action works, does a few things, then saves for web as PNG. It is just the open which is not working. It tries to give all files the same filename. Taking the filename out of the Action is not an option. Scan of msg boards say that this feature stopped working around CS3. Any ideas? Much appreciated.

Open opens images the same size and resolution they are saved. If you want the images to be a particular size you need to do that in the action.
If you download my crafting actions package. You will find the there are over a dozen scripts I wrote to be used with in action. One is a plugin script that would be particularly helpful to you to do the resize you want to do. The first three steps would be Step 1 menu File>Automate>AspectRatioSelection.... You would set in a 1 to 1 Aspect ratio. Centered, rectangle. replace, selection and 0 feather. In its dialog. Those settings will be recorded into the Actions step. Step 2 menu Image Crop. that will make you image square. Step 3 menu File>Automate>Fit Image... In the Fit image dialog you would set 630 in the width and height fields. These settings will be recorded into the actions step. When the action is played no dialog will be displayed. The recorded settings will be used.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download

UAR Approvals for roles with multiple owners

Hi All, We have in many cases, two role owners for roles defined in CUP. When running the UAR, both owners are notified.
However, when one of the owners submits the approved/removals UAR request, the request closes out and the other owner does not have the opportunity to validate the request also.
Any suggestions how to be able to accomodate both owners?
The UAR CAD option is out of scope since it makes no sense to upload and maintain 4000 roles in the CAD.
Thanks! -Dylan

FYI, We were not able to find an acceptable workflow solution but decided to restrict access via authorization. We will allow the role primary Role Owner to make the UAR line item updates but not allow the Role Owner to submit the UAR.
The Secondary Role Owner will be allowed to Submit final version of the UAR.
Role makeup:
ZAE_UAR_ROLE_OWNER (UAR Role Owner Approver)
AE.ViewAccessEnforcer
AE.ViewRemoveAccess
AE.ViewApprove
AE.ViewSaveRequest
ZAE_UAR_QUARTERLY_OWNER (UAR Quarterly Owner Approver)
AE.ViewAccessEnforcer
AE.ViewSubmitRequest
Hopefully, more workflow flexibility is will be built-in to the UAR just like with normal CUP requests.
Best Regards, Dylan

Custom UME Role with action: Manage_All_User_Passwo

Hi all,
I have to create a custom role on EP. This role has to able a user to manage the password of all user (only password).
i created a custom UME role Reset_PWD and I add the following action
Manage_All_User_Password
I attribute this role to a user.
When I logon with this user I get an error: Page not found.
Any suggestion to solve my problem?
Thanks in advantage
Enzo

Hi Enzo,
The reason why you are getting this error is because you have assigned just the role and an action to it. There is no content attached to the role.
For this requirement, I am not sure if adding any existing iview will help or not.
Thanks,
Nikhil

BAPI_SalesOrder_CreateFromDat2 fails for items with free goods

Hi all, I have a very weird problem when I am trying to create a sales order using SAP .net connector with the BAPI function BAPI_SalesOrder_CreateFromDat2(). The problem happens through the following scenario:
1 - Item X has a free good rule on it that states "If user buys 5 Cartoons of Item X he will take 1 pack of Item Y free of charge" while Item Z has no rules like this
2 - using BAPI and .net connector, an order is needed to be created with following details:
a - Item X with quantity 6 Cartoons.
b- Item Z with quantity 3 Cartoons
3 - If BAPI_SalesOrder_CreateFromDat2() assigns these details to Order_Items_In with the same order (a then b), SAP will return an error for Item z that states "No item category available (Table T184 ZKE NORM KEN)."; while if the function tries to create the order with details in reverse order (b then a ), the order will be created successfully.
I have done the following steps:
1 - Tried the same order in SAP GUI but it succeeded. (So no problem in Item Category Determination)
2 - Tries the same order with the suspicious order in the BAPI function Test inside SAP GUI (using tcode BAPI or SE37) but the function had not return any errors also.
3 - Tried to send Item Category in code when calling the bapi function (Forced the code to KEN), but the same message appeared as SAP insist on redetermining the Item Category and return this meaningless message.
thanks

Hi Mohamed Abd Elbaset,
I am facing the same issue while creating the Sales order through "BAPI_SALESORDER_CREATEFROMDAT2" All is going well in normal cases but when I process the contract with FREE GOODS line items for which free goods condition record is maintained it fails
to create the Sales order. Is there any special treatment for this Free goods case..
Regards,

Filling of S table fails for fields with free form text or description

Hello Everyone,
We are trying to rollup a new InfoCube into our BWA system and it fails with a short dump CONVT_CODEPAGE with exception being CX_SY_CONVERSION_CODEPAGE when filling up S table for a description field.
The only difference between the new InfoCube we are trying to load and the other existing InfoCubes is that, the new InfoCube we are trying to load has a field/InfoObject which is free form description for a line item field.
Also, when I checked the application log the system gives out the message "A Character Set conversion is not possible".
Did anyone encounter this issue when trying to create BWA indexes for InfoCubes which have text columns in the InfoCube.
We are currently at revision 52.
Thanks in advance.

Hi Dharma,
It's an interesting and new BWA case for me, so sorry no direct answer. I'll try to replicate it in free time I hope you opened a message with SAP Support for this.
From pure BW modeling perspective I normally model this in a way that this "description" Characteristic A is marked as "Attribute-only" and then used as a display attribute of another Characteristic B, e.g. Line Item Number. From BWA perspective it means that A is not indexed into the accelerator and joined only for display during OLAP time.
Regards,
-Vitaliy

Ping failes for fqdn with two records, first record unavailable

Scenario is:
10.80.56.147 = DOWN (unavailable)
10.80.56.148 = UP (available)
bash-2.05# nslookup cscs.floreffe.se
Server: idns.floreffe.se
Address: 10.80.56.186
Name: cscs.floreffe.se
Addresses: 10.80.56.147, 10.80.56.148
bash-2.05# ping cscs.floreffe.se
no answer from cscs.floreffe.se
Why does ping fail? Why does not secondary IP address being used.

BadboyRune wrote:
Hi,
Thanks for your answer, I have alredy disabled nscd on the system. So Solaris doesn't make some kind of check if the first IP is reachable, or saves both addresses? No. That is uncommon in most UNIX applications. The application is usually trying to operate on a single address, and uses names just to look up the address that it will use.
There are more robust applications that become more complex with dynamic name changes supported, real-time failover support, etc, but that's not an OS feature, it's handled per-application. 'ping' does not do so. TCP connections are bound to a specific address. For an application to use TCP and multiple addresses, it has to recognize the problem, then re-establish a new connection with the host, etc... This is not commonly done.
The reason for the question in the first place are the redundancy problems we have faced. If the first address isn't reachable, the second one has to be used...
What's the application? Why is the address going down? In some cases this could be handled through the use of IPMP or maybe through a load-balancer application/appliance. But that would depend on your network topology and the actual problem that you're encountering.
Darren

Auto power-on for MacMini with WinXp

Anyone know how to enable auto restart on an Intel Mini running WinXp (bootcamp).
I would like to use the MacMini as media center for some project. The machine must run WinXP. If there's a power failure, I want the Mini to auto power-on again by itself once the power supply recover.
The problem I'm facing now is the EFI. Most auto-restart feature in WinXp only works on BIOS.

You should probably post your question in the Boot Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

Performing a mass rename on originals to get rid of backslashes in file names. Worked for most files but failed for some with OSSStatus -43. Can't find any info on error -43. Any ideas?

I'm moving all my managed files to be referenced so I can access from both Aperture and lightroom. Needed to do a rename on 16,000 files to get rid of backslashes in the file names. Most of the time it worked but for 1093 files it gave OSSStatus -43. I've tried googling the error and got nothing. Any ideas where to begin looking?
Thanks
Jim

How are you renaming the files? In the "File > Relocate original file" dialog panel? Are you using a custom name format?
Have you checked in Aperture, if the originals, that are giving you the error message, are still inside the Aperture library?

Log and Transfer Process Failed for AVCHD with SD card

I shoot on SD Cards using AVCHD technology.
It creates a file called “Private”.
When I want to ingest the footage into Final Cut, I must choose log and transfer and then drop the clip into the window.
I can see and watch the clip before I start the process but if fails when I try and complete the log and transfer process.
Any ideas / trouble shooting help to get this to work???

Fails how? What exactly happens? What do you see on your computer?
Exactly what format did you shoot? What settings are you using in FCP? What OS? What version of the software? What version of QuickTime? What computer? What drives? How's everything connected? What's the scratch disk? How's it formatted? That'll be a good start.

CUP Provisions user to SAP successfully but gives "Auto-Provisioning" error

Hi All,
I'm getting an "auto-provisioning" error in CUP when a "Change Account" workflow is approved. The strange thing is, CUP does successfully provision the change to the SAP backend. Yet, the "New Account" provisions successfully without the error.
Here is an example of the audit trail log from Change Account:
Request submitted for approval by Dylan Hack(HACKDY) on 06/28/2010 17:14
Approved By Dylan Hack(HACKDY) Path AE_AUTO_APPROV_ERROR and Stage AE_AUTOPROV_ERR on 06/28/2010 17:14
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
Auto provisioned for request on 06/28/2010 17:14
   User Provisioning failed for System(s) : DEV. Error Message :
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
Request submitted for reroute by system on 06/28/2010 17:14 due to auto provisioning failure
   Rerouted in the Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR to Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR
Note: the role names were replaced with "xxxxxxx."
The system log gives an error, but it is very vague:
2010-06-28 17:14:34,682 [SAPEngine_Application_Thread[impl:3]_33] ERROR com.virsa.ae.service.ServiceException
com.virsa.ae.service.ServiceException
     at com.virsa.ae.service.sap.SAPProvisionDAO.intializeWithChangeUserInputParameters(SAPProvisionDAO.java:762)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3457)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3419)
Any ideas or suggestions?
Current software level AC5.3 SP12.
-Dylan

Hello Varun,
Thanks for the thought on this. We don't use User Defaults for Change Account, but do for New Account. You question prompted me to do more testing with very interesting results.
Results
New Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
New Account without User Defaults configured:
User provisioned successfully, no Auto-Provision error.
Change Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
Change Account without User Defaults configured:
User provisioned successfully, Auto-Provision ERROR, Defaults NOT provisioned.
In both New and Change Account, the configured User Defaults are NOT provisioned even though the user is provisioned. AC5.3 is on SP12, the RTA is VIRSANH SP12 and VIRSAHR SP10.
For the Change Account, the user is always provisioned regardless of User Defaults; however, when no User Default is configured, the Auto-Provisioning error occurs. The User Defaults NOT provisioning is a real problem, the CUP error message, I can work around for now.
What about on your side? Am I the only guy using SP12 here?

CUP Auto Provisioning Error 260: User Comparison

I am in the process of configuring the CUP 5.3 module within our ECC and SRM environments. I believe the path and associated stages are established properly. I have tested the auto provisioning functionality within both SRM and ECC. As it relates to SRM, the auto provisioning functionality works without a hitch. However, when I attempt to auto provision a user into our ECC environment, I receive the following error:
Auto provisioned for request on 04/07/2010 13:41
   New User: T00522 created on 04/07/2010 13:42 in System(s): DR4-300.
   User attributes changed for User : T00522 in System(s) :DR4-300.
   Role Provisioning failed for System(s) : DR4-300. Error Message : 260:User master comparison incomplete; see long text
Speaking with out security team, the only time they have seen this issue was when they attempted to map a user, using PFCG, to a role. However, I informed them that CUP uses SU01. They have not experienced such an issue using SU01 and clicking on the user comparison button.
Interesting point: The user record is created and roles assigned to user but have a red light indicator by the role within SU01. However, when the next day rolls around the role has been changed to a Green light, profile assigned and everything is looking good. Unfortunately, CUP can't seem to register this and when the Role Owner attempts to approve the role / user request again. The same error occurs and until I can get around this error, the workflow is not closed out nor is the requester notifiied.
Questions:
(1) How can I fix this issue, I assume it will require a security change to be made within the ECC environment?
(2) If this issue can't be fixed, can I get around this issue with a detour or other CUP error processing step?

Denoted below is the log that corresponds to the 260 comparison error. Does anyone know what access I am missing within the UME. I have tested this provisioning process, manually, and do not run into a Comparison error within the SU01 screens:
2010-04-27 13:44:54,748 [SAPEngine_Application_Thread[impl:3]_31] ERROR com.virsa.ae.service.ServiceException: 260:User master comparison incomplete; see long text
com.virsa.ae.service.ServiceException: 260:User master comparison incomplete; see long text
     at com.virsa.ae.service.sap.SAPProvisionDAO.executeRoleOperation(SAPProvisionDAO.java:1706)
     at com.virsa.ae.service.sap.SAPProvisionDAO.assignRoles(SAPProvisionDAO.java:1458)
     at com.virsa.ae.service.sap.ProvisionSAPUserDAO.provisionInNonCUA(ProvisionSAPUserDAO.java:1232)
     at com.virsa.ae.service.sap.ProvisionSAPUserDAO.provisionRole(ProvisionSAPUserDAO.java:932)
     at com.virsa.ae.service.sap.ProvisionSAPUserDAO.provisionUser(ProvisionSAPUserDAO.java:118)
     at com.virsa.ae.accessrequests.bo.ProvisioningBO.autoProvision(ProvisioningBO.java:216)
     at com.virsa.ae.accessrequests.bo.RequestBO.autoProvisioningForApprove(RequestBO.java:4572)
     at com.virsa.ae.accessrequests.bo.RequestBO.callAEExitService(RequestBO.java:5565)
     at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:5339)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:5191)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:4984)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:941)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:103)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
2010-04-27 13:44:54,927 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.accessrequests.bo.RequestAuditHelper : logMajorAction() :   : intHstId : 3068
2010-04-27 13:44:54,972 [SAPEngine_Application_Thread[impl:3]_31] ERROR no dtos exist which are in the same state as the passing dto
com.virsa.ae.core.ObjectNotFoundException: no dtos exist which are in the same state as the passing dto
     at com.virsa.ae.workflow.bo.WorkFlowBOHelper.getIfUnapprovedPathExists(WorkFlowBOHelper.java:2662)
     at com.virsa.ae.workflow.bo.WorkFlowBOHelper.handleWFForNewPathStage(WorkFlowBOHelper.java:2516)
     at com.virsa.ae.workflow.bo.WorkFlowRequestRerouteHelper.rerouteRequest(WorkFlowRequestRerouteHelper.java:68)
     at com.virsa.ae.workflow.bo.WorkFlowBO.rerouteRequest(WorkFlowBO.java:614)
     at com.virsa.ae.accessrequests.bo.RequestBO.rerouteRequestForAutoProvisioningFailure(RequestBO.java:6897)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:5239)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:4984)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:941)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:103)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
2010-04-27 13:44:55,394 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.accessrequests.actions.RequestViewAction : confirmRequestApproval() :   : setting context to true, ending context
2010-04-27 13:44:55,414 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.RequestDataForwardDAO : findTransactions() :   : sbQuery : SELECT REQNO, REQPATHID, STAGE_NAME, FWDED_BY, APRVRID, ITERATION, FORWARD_TYPE, STATUS FROM VIRSA_AE_RQD_WPFWD WHERE REQNO = ?
2010-04-27 13:44:55,486 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.SAPConnectorDAO : findAllActiveSAPConnectors :   : going to return no of records= 3
2010-04-27 13:44:55,495 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.OracleAppsConnectorDAO : findAllActiveORACLEConnectors :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,498 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.PACSConnectorDAO : findAllActivePACSConnectors :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,502 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.WSConnectorDAO : findAllActive :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,505 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.ApplicationDAO : findAllForContext :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,532 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.RequestDataSODConflictDAO : findAllForContext(SqljContext ctx) :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,535 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.RequestDataSODConflictDAO : findAllForContext(SqljContext ctx) :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,540 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.dao.sqlj.RequestDataMitigationDAO : findAllForContext(SqljContext ctx) :   : going to return ImmutableList(empty)
2010-04-27 13:44:55,579 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.accessrequests.actions.RequestViewAction : pageLoad() :   : INTO the method
2010-04-27 13:44:55,580 [SAPEngine_Application_Thread[impl:3]_31] INFO com.virsa.ae.accessrequests.actions.RequestViewAction : pageLoad() :   : request number : 154
2010-04-27 13:45:14,055 [SAPEngine_Application_Thread[impl:3]_18] INFO com.virsa.ae.dao.sqlj.RequestTypeDAO : findAll :   : going to return no of records= 20

SP12: Auto-provisioning failed for role with action "keep"

Similar Messages

Maybe you are looking for