SP2-0310: Failed to open the file "coreins.sql"

Hi, when i try to install apex 3.0... on oraclexe , in the file install****.log show this error SP2-0310: Failed to open the file "coreins.sql"

You will find the answer to your problem in this forum..
Database Installation

Similar Messages

Pls Help!-'Failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

yumibobcat wrote:
> what do you do when an error 'failed to open the file'
shows up when you try to
> open something...?
> i'm pretty sure that i am using the same version of
flash as the one i used
> before to create this file.. but just on a different
mac.
> please help!!!!?(????)
>
If you are using the same version the file was made in then
the only thing
left which give such error is a corrupted FLA. Beyond
recovery once fail to
open.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Libre ~ Error 2038 "failed to open the file"

Good morning.
I have a Libre-eBook reader Pro.
I have downloaded and synced from Kobo to my Libre with no problems.
But when I try to download ebooks from the public library they download and open in Digital Editions just fine. I drag and drop them into the bookshelf marked Libre-eBook Reader Pro.
They show up when I turn on my ebook, but when I try to open them I get the 'failed to open the file'.
I was also getting the Error 2038 in Digital Editions when I did the drag and drop thing. I read through the forum and went through the steps recommended for the Nook ~ deleting the digital editions folder on my ebook and having Adobe reauthorize it. I no longer get the 2038 error message in Adobe, but I am still unable to open the books from the library.
I have tried deleting the books from ereader and ADE and redownloading from the Library. Didn't help.
Any other suggestions?
Thanks.
Heather

Hi Ambs101010,
Based on my research, the error can be caused by that the machine.config file is incorrect or corrupted. Please use the following steps to troubleshoot the issue and check if the error still occurs.
1. Open the machine.config in Visual Studio and check if there is any syntax errors. If syntax errors exist, modify the machine.config file directly. For more details, please review this similar
thread.
2. If the error still persists, please follow the steps to replace the machine.config file. Another alternative method is to replace the current machine.config with the machine.config file from another computer.
      a. Go to the folder C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG
      b. Rename the file machine.config to machine.config.old
      c. Make a copy of the file machine.config.default and rename the copy to be machine.config
      d. If your Operating System is 64-bit, go to the folder C:\windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG and repeat the above steps
      e. Reboot your computer
Thanks,
Lydia Zhang

After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

Hello
I am experiencing a problem with AE CS3.
I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
Any ideas? I don't know what to do next.
Thanks,
-------------S

Your USB drive may have had a weird character in it's name.
AE can't read CMYK images, that is usually the problem.
Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
- Jonas Hummelstrand
http://generalspecialist.com/

'failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

You will find the answer to your problem in this forum..
Database Installation

SP2-0310: impossÃble open archive "c:bdbiblio.sql"

Hi,iam new in oracle, and new in english too.
If any one, could help me i wil be happy.
I'm trying to execute, a file, that i create in notepad, in sql plus, but i've got thid=s message error:SP2-0310: impossibe open archive "c:bdbiblio.sql".
If someone could help me please mail me: [email protected]

Thank's for the help.
The soluction, you gave to me, did not resolve my problem.
My paltaform is windows 2000, and i use oracle 9i, maybe this information could help. When i use one archive, that was executed one time with the sql/plus in other machine, it work's. But if i just create, an archive, in my machine, they dont start and the error message is the same.
Please help me, i need it for my graduation.

How to store SP2-0310: unable to open file errors in log file

We are using oracle 10g on Linux platform.
When we send scripts to the clients, then we also send a control file that executes all the sql files e.g.
control.sql
SPOOL test.log
SELECT 'Start of Control File at:'||systimestamp from dual;
SPOOL OFF
@./dbscripts/00_insert_scripts.sql
SPOOL test.log APPEND
SELECT 'End of Control File at:'||systimestamp from dual;
SPOOL OFFThe scripts are executed from SqlPlusW only by typing @control.sql
The problem is that when SP2-0310: unable to open file error comes, it appears on the screen only. It does not go in the test.log file. Is there any way to store these errors in a file from SQLPlusW.
Thanks.

try mentioning full path....
try
@<fully qualified path>/00_insert_scripts.sql
also check if the file has necessary permission
ls -l <fully qualified path>/00_insert_scripts.sql

Bug in file opening "SP2-0310: Unable to open file." How to register it ? ( Version 4.1.0.18)

Steps to repeat in version 4.1.0.18
1) mkdir sql
2) cd sql
3) touch script2.sql
4) touch script1.sql and write @@script2.sql
5) open the script1.sql from "Files" tree in sqldeveloper, choice connect to any oracle db , run script(F5)
Error starting at line : 1 in command -
@@script2.sql
Error report -
SP2-0310: Unable to open file: "script2.sql"
If try to execute this case in version 4.0.3.16 then all work will be fine.
How to register it ?
Message was edited by: DmitryZaytsev

Hi!
The SP2-0310 error occurs when you have not fully-qualified the PATH to the file. Rather than rely on a variable, specify the fully-qualified path.
HTH!

Error: sp2-0310 unable to open file c:\desktop\oracle\table.sql

I am not able to open any files that I have downloaded and put into a file path. I keep getting the error sp2-0310 unable to open file. I made sure to save my files in a path with no spaces. What can I do to resolve this error message.
Thanks.

As already said, you need to verify you've really got the correct path. After that, you can also check to see that the file name is really table.sql. If you created the file in a simple text editor, sometimes the editor will append .txt to the file name. But if you have "Hide Extensions" turned on in Windows Explorer, then you wouldn't see the .txt extension. Check the file name and make sure it really is as you think and doesn't have another extension on it.
Finally, how are you trying to use the file in SQL*Plus? If the path and file name are correct, you should be able to do this:
SQL> get c:\desktop\oracle\table
and it should bring up the file into the SQL*Plus buffer. Or, you should be able to use:
SQL> @c:\desktop\oracle\table
to execute the contents of the file.
If you are simply using:
SQL> @table
then you could add the SQLPATH environment variable to point to c:\desktop\oracle and that would allow you to skip entering the path.
Hope this helps,
Karen

Failed to open package file due to error 0x800C0006 "The system cannot locate the file in C# code.

Hi, Am facing issue when I try to run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document

Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Creation of Recovery Disks - 'Failed to open the following file" Error

Greetings All,
I am in the process of trying to create a Recovery Disk Set for a Client's *Satellite L300 - PSLB8A-07U004*.
While the application opens and begins the creation of the disk set, it has, three times now, failed at with the error message of *"Failed to open the following file. D:\!V5_01_07.VRP (Error Code: 020123-F1-00000000)".*
I did attempt this process the first time while the all the client's data was still loaded.
I have now done a 'Restore to 'Out of the box experience' because I thought one of those files might be the cause but, alas, the error was repeated.
Obviously this is irritating (to say the least).
I have NOT made any change to the layout or sizing of partitions.'
Any thoughts?
rampant_rhino

Thank you both for your responses.
You were on the right track.
I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
On changing over to TDK disks, the problem did NOT repeat.
Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
Again, thanks to you both.

'failed to open the PDF file' error - Indesign CS3 on Mac

Hi,
Whenever I place PDFs that were created by any other app besides indesign or Illustrator I get a 'failed to open the PDF file' error, previously these PDFs were fine to place but all of a sudden they're not... Help?
I'm not too keen on opening in Illustrator and resaving for the rest of the foreseeable future either...
Jared

Thanks for the reminder, Scott.
http://indesignsecrets.com/failed-to-open-pdf-error-show-options-to-fix-it.php
Bob

Content generation error. Failed to open the InDesign file.

Hey all -
In importing an article to a folio, I just received this error:
"Content generation error.
Failed to open the InDesign file. Please confirm the file can be opened in InDesign."
The file is open right now in InDesign. I can close it and reopen it with no errors.
I've tried resaving the article to a new file. No help.
I tried creating a new folio and importing the article there. No help.
All links are good. It's a simple file with images, a scrolling pane, and some buttons that link to other articles.
Anyone else run into this problem? Any solutions?
Thanks!

Im getting this error also....?
Want to avoid inporting each artical on at a time. Need to import multiple articals at once.
Thanks.

Failed to open the PDF file

I have to place a large number of PDF files. Sometimes I get an error: "Failed to open the PDF file". In the InDesign Forum I found that this also happens in the GUI from time to time and that the workaround is to turn on the Show Import Options. But this is obviously not an option for me.
Is there any alternative?
Thank you, Ralf

When you retry, is it always the same PDF?
Otherwise I'd play around like
- catch the error
- perform some potential cleanup of resources (files, memory), e.g. SaveAs, or a Close-Reopen cycle
- retry the same PDF
Dirk

I have an issue with the latest project i am working on. When i open the file, the arrange window fails to open

Really strange issue. Only on one project.
If i open the file, i can see logic running through the list of instruments, but the only window that opens is the fixed note length Midi transform window. I cant see the arrange window anywhere!
If i khit play on my midi controller keyboard, i can play the project and hear everything as it should be, but just cant see the arrangement.
If i attempt to close the Midi transform window, it wants to close the who project.
Any ideas on what i do!?
Thanks

Thanks, but i'd already tried that and it didnt work.
I have managed to fix it though, and for anyone else with the same issue, here is what i did:
Find your Logic project file
Right Click on the project, and choose 'Show Contents'
Open the displayed folder 'LgDoc'
Remove the file 'displayState'
open the project, and all should be good!

SP2-0310: Failed to open the file "coreins.sql"

Similar Messages

Maybe you are looking for