SP2-0614:Server version too low for this feature

Hi,
In the preparation phase for Oracle 9i upgrade, (Step 3.7 - Oracle 9i-Unix upgrade Guide)
we ran @CHECKS.SQL under /oracle/stage/920_64/Disk1/SAP directory
received errors SP2-0614:Server version too low for this feature
ORA-01034:ORACLE not available
Source System: Oracle 8.1.7.4, Kernel 620, HP-UX 11.11 9000/800
I went though Oracle site for this issue and it says, that we need go for patch to resolve this issue. But I am not sure, if this is needed or not. Shall I can continue upgrade without this patch?
Please help me to resolve this issue.
Thanks in advance
Regards
Srinivas

what is parameter value for <compatible> in initSID.ora ?
it should be set to 8.1.7.4

Similar Messages

Smart ac adapter power output is too low for this computer on business notebook 6830s

Hallo,
Sometimes he is charging, sometimes he isn't.
I think it's a bad contact between the plug of the power adapter and connector on the motherboard.
Can I do something to improve the contact ?
thanks
Jos

Hi Erico,
erico wrote:
CKDewey wrote:
When I remove the battery, it will not boot at all. Is this power supply DOA? The computer seems to know it is plugged in when Windows is running...
That sounds as if that could be the case. Is the power adapter an original HP or is it an aftermarket brand?
If your notebook was delivered with a 65 Watt Power adapter the it is recommended that you replace it with an identical power adapter. Don't try to second guess the engineers who designed the notebook.
Best regards,
erico
I believe it is an original power supply; the model number is noted in my original post. I really would like to agree with you about second-guessing the engineers, but I have seen too many poorly designed systems, including one in particular from HP.
At my last job, our CTO was an HP fanatic, and owned the largest and most powerful HP notebook at the time. I helped him to order a docking station for it based upon the HP compatibility list. When the docking station was connected, he encountered numerous strange power-related problems, and especially had problems with USB devices connected to the docking station ports.
It turned out after a bit of experimentation that the power supply that came with the docking station was inadequate to power the set-up, and using a larger supply completely resolved the issue.
However in my case it does appear this might be a dead or counterfeit supply. I will test it on my colleague's notebook, since it is identical except that he is running Windows (SP)7. I will update you with my findings. Thanks for your help.
Cheers,
Tom

'Smart ac output adapter is too low for this computer'

I have got this error message after 1 year using my Hp 6930p.
And also the HP battery check says that the battery needs replacing.
So is that plainly battery error or anything else may happen to my computer.
Please, help me. Thank you very much.

If you want to give Kudos click on the Kudos icon and you will give Kudos, but hey I appreciate the shout out anyway.

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

I finished adding my transtions to my timeline. I was having crashing issues so I shut down everything before I rendered the project and now it tells me that the project is unreadable or the file is too new for this version of final cut. What Happened?

What Happened?
No way for us to know. But if your system was crashing, there definitely was a problem. The FCE error message you got normally indicates the FCE project file has been corrupted. This probably happened due to whatever caused your system to crash & shutting down the system.
First, make sure your system is running correctly. Then, use the Finder to navigate to /users/yourusername/Documents/Final Cut Express Documents/Autosave Vault and find the most recent backup copy of your FCE project file. Copy the file to your Final Cut Express Documents folder (copy the file, don't just move it). Then double-click the copy to open it in FCE. It should open ok, but will probably not have your most recent edits (transitions). You may have to rebuild the transitions, but at least you will be back in action.

Can't open Project - The file format is too new for this version of the pro

Hi everyone
I have the following Problem with my Final Cut Express: When I try to open a project i get an error message: "The file format is too new for this version of the program". (my FCE is in german, this is the google translation!)
I have already erased all the rendering files, but no luck.
Please Help!

Have you recently reinstalled FCE and forgotten to update it?

Final Cut Pro 6 by Diana Weynard: Format too New FOR THIS VERSION OF APP?

I purchased the book book Final Cut Pro 6 by Diana Weynard and it is a basics book overview of FCP However it comes with CD and I have downloaded the CD to my hard drive and when i open the files in
FINAL CUT PRO 6 it says:
FILES FORMAT IS TOO NEW FOR THIS VERSION OF THE APPLICATION.
I did go to the website and download the updates.
I have upgraded osx to 10.5.5
FCP is at 6.0.4
Quictime Pro 7.55
Whats going on?
I bought this book. And when I try to play the Lessons it says FORMAT TOO NEW FOR THIS VERSION OF APPLICATION?
Are my settings wrong?
I have seen this same thread and now answer. I would appreciate some major help from the top users on here! thanks guys

the projects included with this book were built with and for FCP 6 ... if you do not have FCP 6 then its no good to you.
what version of FCP are you running? with FCP open, choose *Final Cut Pro* menu *> About Final Cut Pro* and see what version it says there in the splash screen

File's format is too new for this version of the application

A project that was edited in FCE on an iMac will not open in FCE on a MacBook Pro. When I try to open it, I receive the error: File's format is too new for this version of the application.
The FCE that was installed on the MacBook Pro is exactly same copy as the one loaded onto the above mentioned iMac -- they were each were installed from the same, Apple Store purchased disk.
Thanks for any help.
-Mike

Hi(Bonjour)!
Did you apply the FCE 4.0.1 update on both machines?
Michel Boissonneault

The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade

Hi Guru,
I' am doing prepare : upgrade from R/3 entrerprise 47X100 to ECC6.0 SR3.
PREPARE
02)                       Initialization     failed        yes
the checks.log report the following error :
SAPup> WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this
upgrade (> 2005_1_700).
                To avoid loss of data it is necessary to include the latest avai
lable version for the Add-on
                in the IS_SELECT phase.
                Please refer to Add-on note 69455 for further information.
I can't go on , How can I include the add-on in the upgrade ? the phase for include the add-on upgrade is 04) Extension   but i cannot skip phase 2    ? ! ? !
OSS note 69455 does not contain valid information.
thank's for the answer.
Regards Antonio.

Hi
I got the same error and it actually prevents from getting further, because its treated as an error.
"ERROR: To be able to use ASU Toolbox, your system requires at
       least Support Package Level 8 for the ST-PI software component
       For more information, see the upgrade documentation
WARNING: The version 2008_1_620 of the Add-on ST-PI is too high for this upgrade (> 2005_1_700).
         To avoid loss of data it is necessary to include the latest available version for the Add-on
         in the IS_SELECT phase.
         Please refer to Add-on note 69455 for further information."
2008_1_620 does not have a level 8, so it must be refering to the 2005 version of ST-PI.
Update SAPup.exe (in <upgrade dir>/bin) to newest version.
Regards
Kim
Edited by: Kim Hynek on Mar 30, 2010 11:36 AM
Edited by: Kim Hynek on Mar 30, 2010 11:40 AM

TS2611 I re installed my Final Cut express software, now when I go to use my "halo" and "arrow" application I get a message that says the file format is too new for this version of the application. Anybody have suggestions?

I re installed my Final Cut express software, now when I go to use my "halo" and "arrow" application I get a message that says the file format is too new for this version of the application. Anybody have suggestions?

After install, did you go to Apple menu > Software Update to update your FCE to the latest version?
MtD

FRM-92095 Oracle Jinitiator Version too low - dsiplayed on client machine

Hi,
When I login from my Windows/Xp client machine to my Linux Server running R12.1.1. I get the message below:
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I really do not know what this means.
Can some one give me the steps on how to fix this issue--when I open a form from the client machine.
Thank you, in advance for your help.
Edited by: user565503 on Aug 26, 2011 9:52 PM

When I login from my Windows/Xp client machine to my Linux Server running R12.1.1. I get the message below:Was this working before? If yes, any changes have been done recently?
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I really do not know what this means. Oracle EBS R12 comes with JRE so you are not supposed to download any Jinitator version. If you already have one installed, please uninstall it (via Control Panel > Add/Remove Software) and check then.
Can some one give me the steps on how to fix this issue--when I open a form from the client machine.Can you reproduce the issue using a different browser? What if you try from a different machine?
Please run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

FRM-92095: Oracle JInitiator version too low!

Hi everybody,
After I upgraded my Macbook Pro to the latest java of Oracle Java ver7 update 9 I am stuck.
I cannot luanch oracle from on an ERP V12 installation gettling the following error:
FRM-92095: Oracle JInitiator version too low.
I have try to follow the links to deinstall Java 7 and reinstall java 6.
The problem after this is the browser keep on say plugging missing and took you to the site to reinstall java 7 upgrade 9
I tried the site: http://support.apple.com/kb/HT5559
but it didnt work too...
Please help.
MacBook Pro 13", OS X Mountain Lion (10.8.2)

When I login from my Windows/Xp client machine to my Linux Server running R12.1.1. I get the message below:Was this working before? If yes, any changes have been done recently?
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I really do not know what this means. Oracle EBS R12 comes with JRE so you are not supposed to download any Jinitator version. If you already have one installed, please uninstall it (via Control Panel > Add/Remove Software) and check then.
Can some one give me the steps on how to fix this issue--when I open a form from the client machine.Can you reproduce the issue using a different browser? What if you try from a different machine?
Please run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

PCTFREE too low for a table

Hi,
Looking at the Server Statistics in Toad, I see that I have "PCTFREE too low for a table". How do I know which table?
Thanks,
Johanna

Don't know much about "Toad Statistics" but which version of database are you on?? and are you using LMT?? Run statspack for more accurate statistics and it will be helpfull to identify the root cause. Are you experiencing any performance problems??
Daljit Singh

When I try to run a form I get a message of Jinitiator version too Low

I've run my first form of Oracle Forms on google chrome but I get the following message:
"FRM-92095; Oracle Jinitiator Version too Low. Please install version 1.1.8.2 or higher"
I can't understand.
From the control pannel of Windows XP I see "Jinitiator 1.3.1.22"
I use Forms 10.1.2 on Oracle vers. 10gXE
Thanks in advance!

The Oracle Jinitiator is not compatible with modern browsers. In fact, Oracle has discontinued Jinitiator and no longer supports it's use. Michael is right, you should install the latest Java 6 runtime (JRE 1.6.0_33) and use it instead of Jinitiator.
Since Oracle Forms 10g defaults to using the Jinitiator, you will need to modify your configuration to tell the Forms to use the JRE Plug-In (JPI) instead of Jinitiator. Take a look at Oracle 10gR2 Forms Services – Using Sun's Java Plug-in for information on how to update your configuration to use the JPI.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Warning: PROCESSES may be too low for current load

Hello,
I have 64 bit centOS Server and have oracle 10g installed on it.
We have 8GB RAM and 64 bit Server but we were able to install oracle on 2GB SGA only.
From few days I am facing following error:
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=114, want 8 more but starting only 1 more
Warning: PROCESSES may be too low for current load
shared servers=115, want 8 more but starting only 0 more
I have executed following commands:
ALTER SYSTEM SET max_shared_servers=200 SCOPE=MEMORY;
ALTER SYSTEM SET circuits=300 SCOPE=MEMORY;
But I am still getting the same error,and server average load goes too high and needs a oracle restart.
Please let me know in case any one has solution for this problem. Its urgent.
Thanks in Advance.

Sir ,
please see the output of the below query .
this error had found today early morning when rman backup get start .
SQL> show parameter process
NAME TYPE VALUE
aq_tm_processes integer 0
db_writer_processes integer 1
gcs_server_processes integer 0
job_queue_processes integer 10
log_archive_max_processes integer 2
processes integer 500
SQL> select count(*) from v$process;
COUNT(*)
93
SQL> select count(*) from v$session;
COUNT(*)
94
the error msg in the alert log file is
Warning: PROCESSES may be too low for current load
shared servers=1, want 1172 more but starting only 405 more
Edited by: user9353210 on Jan 4, 2011 9:30 PM

Too low for radio use at 50%

my blackberry 9360 with the newest update out when at 50% battery comes up saying too low for radio use then just suddenly goes from 50% to 0 in a matter of seconds as i watch it cant down faster than anything. i tried pulling battery out when fully charged with charger in but still not working how do i fix this?

Oh...sorry...I think I was not clear..."known good" and "new" are not necessarily the same thing. While rare, a new battery certainly can be defective. Plus, finding someone with an identical BB without these same problems, and trading batteries, is certainly a less expensive method for carrying out this test. Again, sorry about not being clear on that point...
Anyway, refer:
KB14320How to maximize free space and battery power on the BlackBerry smartphone
It is really quite impossible to predict the "normal" consumption rate for any individual user -- each person is unique, and will demand a different level of resource consumption from everyone else. To me, the key is to determine what is normal for your usage patterns...and then become concerned when things deviate from that.
It is also always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

SP2-0614:Server version too low for this feature

Similar Messages

Maybe you are looking for