SP2-1503: Unable to initialize Oracle call interface

Hello All,
I have installed Oracle 10g R1 on my new HP laptop with OS as Windows 7 and the installation was successful.
But, unfortunately while trying to connect to the DB with the sqlplus /nolog command, the below error is re- occuring
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly.
Please, let me know if this is an oracle bug and suggest me if i need to install an upgrade patch.
Regards,
Oracle

Hi.. from oracle metalink
Oracle Database releases "9iR2 (9.2.0.x), 10gR1 (10.1.0.x), 10gR2 (10.2.0.x) and 11gR1 (11.1.0.x)" are not Certified/Supported to install/run on Microsoft Windows 7.
"Microsoft Windows 7" certification will begin with "Oracle Database 11gR2 (11.2.0.x)". That means, Oracle Database 11gR2 will be the first Oracle Database product certified/supported to install/run on "Microsoft Windows 7".
*T                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Similar Messages

  • [sqlplus] - SP2-1503: Unable to initialize Oracle call interface

    Hello,
    I've just reinstall an new Oracle DB 10.2.0.1.0 and when i type SQLPLUS i've this error:
    $sqlplus /nolog
    SP2-1503: Unable to initialize Oracle call interface
    SP2-0152: ORACLE may not be functioning properly
    what's hapening ???
    thanks for your help.

    found !!
    it's a stupid and strange error.... because i re-use my old settings and it's worked.
    now i remove the last '/' on $ORACLE_HOME path... and all works fine.
    thanks...

  • P2-1503: Unable to initialize Oracle call interface

    version 10.2 on windows, any idea?
    E:\>sqlplus /nolog
    SP2-1503: Unable to initialize Oracle call interface
    SP2-0152: ORACLE may not be functioning properly

    E:\>set
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\agulzar\Application Data
    ASSISTANTS_COMMON_CLASSPATH=E:\oracle\product\10.2.0\assistants\jlib\assistantsC
    ommon.jar
    BALISHARE_CLASSPATH=E:\oracle\product\10.2.0\jlib\share.jar
    CANDLE_HOME=C:\IBM\ITM
    CLASSPATH=E:\oracle\product\10.2.0\jdk\jre\lib\rt.jar;E:\oracle\product\10.2.0\j
    dk\jre\lib\i18n.jar;E:\oracle\product\10.2.0\assistants\dbca\jlib\dbca.jar;E:\or
    acle\product\10.2.0\assistants\jlib\assistantsCommon.jar;E:\oracle\product\10.2.
    0\jlib\ewt3.jar;E:\oracle\product\10.2.0\jlib\ewtcompat-3_3_15.jar;E:\oracle\pro
    duct\10.2.0\jlib\share.jar;E:\oracle\product\10.2.0\jlib\swingall-1_1_1.jar;E:\o
    racle\product\10.2.0\jlib\oracle_ice5.jar;E:\oracle\product\10.2.0\jlib\help4.ja
    r;E:\oracle\product\10.2.0\jlib\jewt4.jar;E:\oracle\product\10.2.0\jlib\kodiak.j
    ar;E:\oracle\product\10.2.0\lib\xmlparserv2.jar;E:\oracle\product\10.2.0\jlib\or
    ai18n.jar;E:\oracle\product\10.2.0\jlib\orai18n-mapping.jar;E:\oracle\product\10
    .2.0\jlib\orai18n-utility.jar;E:\oracle\product\10.2.0\jlib\orai18n-collation.ja
    r;E:\oracle\product\10.2.0\jlib\netcfg.jar;E:\oracle\product\10.2.0\jlib\ojmisc.
    jar;E:\oracle\product\10.2.0\jlib\oraclepki103.jar;E:\oracle\product\10.2.0\jlib
    \ldapjclnt10.jar;E:\oracle\product\10.2.0\jlib\opm.jar;E:\oracle\product\10.2.0\
    jdbc\lib\classes12.zip;E:\oracle\product\10.2.0\jlib\srvm.jar;E:\oracle\product\
    10.2.0\jlib\srvmhas.jar;E:\oracle\product\10.2.0\jlib\srvmasm.jar;E:\oracle\prod
    uct\10.2.0\classes;E:\oracle\product\10.2.0\jlib\oemlt-10_1_0.jar;E:\oracle\prod
    uct\10.2.0\jlib\emca.jar;E:\oracle\product\10.2.0\sysman\jlib\emCORE.jar;E:\orac
    le\product\10.2.0\oc4j\j2ee\home\oc4j.jar;E:\oracle\product\10.2.0\oc4j\j2ee\hom
    e\db_oc4j_deploy.jar;E:\oracle\product\10.2.0\jlib\emConfigInstall.jar;E:\oracle
    \product\10.2.0\oui\jlib\OraInstaller.jar
    CLIENTNAME=WMSTUTCTX02
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
    COMPUTERNAME=WMSTUTGIS02
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DBCA_CLASSPATH=E:\oracle\product\10.2.0\assistants\dbca\jlib\dbca.jar
    EM_CLASSPATH=E:\oracle\product\10.2.0\classes;E:\oracle\product\10.2.0\jlib\oeml
    t-10_1_0.jar;E:\oracle\product\10.2.0\jlib\emca.jar;E:\oracle\product\10.2.0\sys
    man\jlib\emCORE.jar;E:\oracle\product\10.2.0\oc4j\j2ee\home\oc4j.jar;E:\oracle\p
    roduct\10.2.0\oc4j\j2ee\home\db_oc4j_deploy.jar;E:\oracle\product\10.2.0\jlib\em
    ConfigInstall.jar
    EWT_CLASSPATH=E:\oracle\product\10.2.0\jlib\ewt3.jar;E:\oracle\product\10.2.0\jl
    ib\ewtcompat-3_3_15.jar
    FP_NO_HOST_CHECK=NO
    GDK_CLASSPATH=E:\oracle\product\10.2.0\jlib\orai18n.jar;E:\oracle\product\10.2.0
    \jlib\orai18n-mapping.jar;E:\oracle\product\10.2.0\jlib\orai18n-utility.jar;E:\o
    racle\product\10.2.0\jlib\orai18n-collation.jar
    HELP_CLASSPATH=E:\oracle\product\10.2.0\jlib\help4.jar;E:\oracle\product\10.2.0\
    jlib\jewt4.jar
    HOMEDRIVE=W:
    HOMEPATH=\
    HOMESHARE=\\wmstutfpcb\itdata\users\agulzar
    I18N_CLASSPATH=E:\oracle\product\10.2.0\jdk\jre\lib\i18n.jar
    ICE_BROWSER_CLASSPATH=E:\oracle\product\10.2.0\jlib\oracle_ice5.jar
    INSTALLER_CLASSPATH=E:\oracle\product\10.2.0\oui\jlib\OraInstaller.jar
    JAVA_HOME=C:\java\java5_01\jdk
    JDBC_CLASSPATH=E:\oracle\product\10.2.0\jdbc\lib\classes12.zip
    JRE_CLASSPATH=E:\oracle\product\10.2.0\jdk\jre\lib\rt.jar
    KODIAK_CLASSPATH=E:\oracle\product\10.2.0\jlib\kodiak.jar
    KUIFILEPATH=C:\IBM\ITM\bin\xml
    LIBPATH=C:\IBM\ITM\bin\dll;C:\IBM\ITM\TMAITM6;C:\IBM\ITM\InstallITM
    LOGONSERVER=\\WMSTUTDC01
    NETCFG_CLASSPATH=E:\oracle\product\10.2.0\jlib\netcfg.jar;E:\oracle\product\10.2
    .0\jlib\ojmisc.jar;E:\oracle\product\10.2.0\jlib\oraclepki103.jar;E:\oracle\prod
    uct\10.2.0\jlib\ldapjclnt10.jar;E:\oracle\product\10.2.0\jlib\opm.jar
    NLSLANG=AMERICAN_AMERICA.UTF8
    NLSPATH=C:\Program Files (x86)\IBM\SCM\msg\%L\%N.cat;C:\Program Files (x86)\IBM\
    SCM\msg\C\%N.cat
    NUMBER_OF_PROCESSORS=4
    OH=E:\oracle\product\10.2.0
    ORACLE_HOME=E:\oracle\product\10.2.0
    ORACLE_SID=ARCSERVP
    OS=Windows_NT
    Path=E:\oracle\product\10.2.0\BIN
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PERL5LIB=E:\oracle\product\10.2.0\perl\5.8.3\lib\MSWin32-x86;E:\oracle\product\1
    0.2.0\perl\5.8.3\lib;E:\oracle\product\10.2.0\perl\5.8.3\lib\MSWin32-x86;E:\orac
    le\product\10.2.0\perl\site\5.8.3;E:\oracle\product\10.2.0\perl\site\5.8.3\lib;E
    :\oracle\product\10.2.0\sysman\admin\scripts;
    PROCESSOR_ARCHITECTURE=AMD64
    PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 6, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f06
    ProgramFiles=C:\Program Files
    ProgramFiles(x86)=C:\Program Files (x86)
    PROMPT=$P$G
    SCM_CLIENT_INST_DIR=C:\Program Files (x86)\IBM\SCM\client
    SCM_HOME=C:\Program Files (x86)\IBM\SCM
    SDEHOME=E:\ArcGIS\ArcSDE\ora10gexe\
    SESSIONNAME=RDP-Tcp#14
    SRVM_CLASSPATH=E:\oracle\product\10.2.0\jlib\srvm.jar;E:\oracle\product\10.2.0\j
    lib\srvmhas.jar;E:\oracle\product\10.2.0\jlib\srvmasm.jar
    SWING_CLASSPATH=E:\oracle\product\10.2.0\jlib\swingall-1_1_1.jar
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\agulzar\LOCALS~1\Temp\3
    TISDIR=C:\Program Files (x86)\IBM\SCM\codeset
    TMP=C:\DOCUME~1\agulzar\LOCALS~1\Temp\3
    TNS_ADMIN=E:\oracle\product\10.2.0\NETWORK\ADMIN
    TSM=C:\Program Files\Tivoli\TSM\baclient\dsmc.exe
    USERDNSDOMAIN=WILLIAMS.COM
    USERDOMAIN=WILLIAMS
    USERNAME=agulzar
    USERPROFILE=C:\Documents and Settings\agulzar
    windir=C:\WINDOWS
    XMLPARSER_CLASSPATH=E:\oracle\product\10.2.0\lib\xmlparserv2.jar

  • Trying to run SQLPlus: Unable to initialize Oracle call interface (again)

    Dear all
    I am trying to install Oracle Instant Client on my powerpc-32bit running Linux. I just obtained these packages:
    instantclient-basic-linuxppc32-10.2.0.2-20060327.zip
    instantclient-sqlplus-linuxppc32-10.2.0.2-20060327.zip
    According to the document <http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ape.htm> these two are enough for me to use.
    I also followed the instruction on the document, by:
    1. Extract everything to /usr/local/instantclient_10_2/
    /usr/local:$ unzip instantclient-basic-linuxppc32-10.2.0.2-20060327.zip
    /usr/local:$ unzip instantclient-sqlplus-linuxppc32-10.2.0.2-20060327.zip
    2. export variables:
    $ export LD_LIBRARY_PATH=/usr/local/instantclient_10_2/
    $ export SQLPATH=/usr/local/instantclient_10_2/
    $ export NLS_LANG=AMERICAN_AMERICA.UTF8
    $ export PATH=/usr/local/instantclient_10_2:$PATH
    ($LD_LIBRARY_PATH and $SQLPATH was empty before I do the above.)
    (I didn't set $ORACLE_HOME because the document didn't require me to do so when I install sqlplus/oracle-client-basic from zip files. However I do tried to set it, doesn't help either.)
    3. run:
    $ sqlplus jxpado/[email protected]/XEXDB
    SP2-1503: Unable to initialize Oracle call interface
    SP2-0152: ORACLE may not be functioning properly
    I looked up causes of SP2-1503:
    Check that the Oracle environment or registry entries are consistent and correct.Yes. Environment is correct (only 3 variables);
    If using the SQL*Plus Instant Client make sure the SQL*Plus
    and Oracle libraries are from the same release. Yes, as you can tell from package zip file names.
    Make sure you have read access to the libraries.True. I am very sure I have read access to all files there.
    So what can I do here? I tried to follow instructions as clear / complete as possible.
    I am sure sqlplus didn't even try to connect to the server at gtz.ods.org because I put a network traffic listener there to monitor access to the server.
    Message was edited by:
    user609663

    Unfortunately there's a bunch of possible reasons for this error combination. I recommend you search metalink for SP2-1503 to get a list.
    Werner

  • ERROR - Oracle call interface

    Hello,
    We are unable to connect to sqlplus on our Linux server.
    Errors:
    SP2-1503: Unable to initialize Oracle call interface
    SP2-0152: ORACLE may not be functioning properly
    Thanks..

    user8969 wrote:
    Hello,
    We are unable to connect to sqlplus on our Linux server.
    Errors:
    SP2-1503: Unable to initialize Oracle call interface
    SP2-0152: ORACLE may not be functioning properly
    Thanks..I've not seen this, but looks like you don't have all your environment correctly set. PATH, ORALCE_HOME, LD_LIBRARY_PATH, etc.

  • Need suggestion for a topic in Oracle Call Interface

    Dear All,
    I am kiran working as a TSE for EAI project.
    I need a small clarification with respect to Oracle Call Interface.
    My problem is as follows:
    "I am doing a delete transaction in my application and not committing it, but when my program is killed externally, I observed that the transactions are being committed.
    I thought it is a very strange behavior, as an aborted transaction should be rolled back.
    But my PL told me that it the behavior OCI and got nothing to do with our application."                    
    Now My question is, whether can we stop/(switch off) that auto commit option for OCI( Oracle Call Interface.
    Awaiting for an earlier response.
    Any kind of help is highly appreciated.
    Thanks in advance,
    Kiran

    Here is some information from Oracle's documentation (Oracle Call Interface Programmer's Guide.
    Commit or Rollback
    An application commits changes to the database by calling OCITransCommit(). This call uses a service context as one of its parameters. The transaction is associated with the service context whose changes are committed. This transaction can be explicitly created by the application or implicitly created when the application modifies the database.
    Note:
    Using the OCI_COMMIT_ON_SUCCESS mode of the OCIExecute() call, the application can selectively commit transactions at the end of each statement execution, saving an extra round trip.
    To roll back a transaction, use the OCITransRollback() call.
    If an application disconnects from Oracle in some way other than a normal logoff, such as losing a network connection, and OCITransCommit() has not been called, all active transactions are rolled back automatically.

  • Oracle Call Interface Code (OCI)

    Does anyone know a good source of example code or tutorials for OCI (Oracle 8i)?
    (Have already looked at the demo code and the docs, which aren't overly helpful.)
    null

    quit wasting your time with the oci
    & check this out
    http://home.sprynet.com/~skuchin/home.htm
    c++ wrapper for the oci thats really easy
    to use with excellent examples
    null

  • Oracle Call Interface

    Hi,
    I didn't find the OCI lib on the Oracle 8.0.5/Linux cdrom. does
    anybody know if Oracle has planed to port it on this plateform?
    Thanks
    Raphal
    null

    If the original SQL statement did not require a bind it
    should not require a bind when moving to OCI 9i
    (this is a property of the statement and not
    of the OCI version).
    There should be no issues with reusing a statement
    handle after allocation. I think that they are reusable
    as long as you do StmtPrepare and any necessary
    define/bind for any new statements, i.e.:
    OCIHandleAlloc (stmthp, ... OCI_HTYPE_STMT);
    OCIStmtPrepare (stmthp, sqlstmt1,...);
    /* optional bind/defines */
    OCIStmtExec (stmthp, ...);
    OCIStmtPrepare (stmthp, sqlstmt2,...);
    /* optional bind/defines */
    OCIStmtExec (stmthp, ...);
    As for the kghalo error, you may want to confirm that
    the stmtp is being allocated correctly, with
    OCIHandleAlloc. If this doesn't fix your problem,
    it might be helpful to post a code snippet here.

  • Sqlplusのエラーについて(SP2-1503)

    sqlplusにてエラーが発生します。
    sqlplusを実行すると以下のエラーが発生します。
    SP2-1503: Oracle Call Interfaceを初期化できません
    SP2-0152: Oracleが正常に機能していない可能性があります。
    発生するようになったのは異なったバージョンのORACLEをインストールをしてからだと
    思われます。
    11.1.0を以前にインストールしており、この時は問題なくアクセスできておりました。
    sqlplus ユーザ名/パスワード@サービス名
    が、11.2.0をインストールしたところ上記ではアクセスできなくなり以下でアクセスできるようになりました。
    sqlplus ユーザ名/パスワード@ホスト名;PortNO/サービス名
    おかしいと思い、ORACLE_HOMEの環境変数がかわったことに気が付き、11.1.0に環境変数を
    変更したところ以下のエラーが発生することがわかりました。
    SP2-1503: Oracle Call Interfaceを初期化できません
    SP2-0152: Oracleが正常に機能していない可能性があります。
    これを解消したいのですがわかりません。
    どなたかわかる方がおりましたらご教授願います。
    OSはWINDOWSXPとなります。
    宜しくお願いします。

    先ほどシステム設定の環境変数(PATH)に設定されている
    内容を11.1.0が先になるように編集したところ利用可能になりました。
    どうやらORACLE_HOMEのbinをPATHに設定されており、これが
    影響していたのだと推測されます。
    解決できてよかったです。
    ありがとうございました。

  • OCCI :Oracle C++ Call Interface

    hello
    i have a project that turn about : get a connection between a program C++ and an oracle database , so i use OCCI : oracle C++ call Interface
    i worke with Visual C++/Borland C++ and oracle release 9.2
    i built and compile my program withount any problem, but whene i execute it i have this message :
    Loaded 'ntdll.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\kernel32.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oraocci9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORACORE9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORANLS9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORAUNLS9.DLL', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\msvcrt.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\wsock32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\ws2_32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\ws2help.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\advapi32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\rpcrt4.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\ole32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\gdi32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\user32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\winmm.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\orageneric9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oracommon9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oraclient9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oravsn9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\orawtc9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\orannzsbb9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oran9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranl9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranldap9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oraldapclnt9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\orancrypt9.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\oleaut32.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oratrace9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranro9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranhost9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranoname9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORANCDS9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\orantns9.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranms.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\oranmsp.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORAPLS9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORASLAX9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORASNLS9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORASQL9.DLL', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORAXML9.DLL', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\msvcirt.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\ORAXSD9.DLL', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\msvcp60.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\secur32.dll', no matching symbolic information found.
    Loaded 'C:\oracle\ora92\bin\orantcp9.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\mswsock.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\hnetcfg.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\wshtcpip.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\netapi32.dll', no matching symbolic information found.
    Loaded 'C:\WINDOWS\system32\netapi32.dll', no matching symbolic information found.
    First-chance exception in OCCI.exe (KERNEL32.DLL): 0xE06D7363: Microsoft C++ Exception.
    First-chance exception in OCCI.exe (ORAOCCI9.DLL): 0xC0000005: Access Violation.
    First-chance exception in OCCI.exe (ORAOCCI9.DLL): 0xC0000005: Access Violation.
    The program 'C:\Program Files\Microsoft Visual Studio\MyProjects\OCCI\Debug\OCCI.exe' has exited with code 0 (0x0).
    when i use Borland C++
    i have anothor message:
    unable to open execptio.h
    i don't have this header file
    please help me

    You may want to post this on a database forum. This forum is dedicated to Oracle TopLink which connects to the database using JDBC.
    Doug

  • Oracle ODBC  - Internal Error - unable to initialize NLS during driver load

    I'm having some trouble with my ODBC connections which I hope someone can please help me with!
    About 6 weeks ago all was working as normal.
    As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Drivers.
    Today when I opened access and visual case 2 to connect to Oracle I was at first greeted with a:
    unable to connect SQLState=IM004 SQL_HANDLE_ENV
    error. ODBC also kept crashing.
    I restarted the computer and was confronted with a different error:
    odbc SQLSTate 08004 ORA 12154 TNS could not resolve the connect identifier specified
    I was able to fix this error by setting the environment variable TNS_ADMIN in windows xp environment variables. I'm extremely confused about how this happened though as it was working and I don't think anything has changed.
    I was then able to connect to the database via Microsoft Access but when I opened Visual Case 2 and tried to make an update, I was confronted with the following error:
    Oracle ODBC Driver - internal error - unable to initialize NLS during driver load
    I looked in the registry at:
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home1
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home2
    HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb10g_home1
    and NLS_LANG was set to "AMERICAN_AMERICA.WE8MSWIN1252" in all 3 places.
    (Though KEY_OraClient10g_home2 only had 4 entries as opposed to KEY_OraClient10g_home1's 13 entries)...
    Since I made those changes I can no longer connect through Access.
    I just receive a ODBC - connection to 'xxx' failed
    Advice greatly appreciated!!!!
    Edited by: user11150264 on Aug 25, 2009 10:21 PM

    Actually it sort of does...
    I switched the ODBC connection to use instant client and now it's all working again.
    The biggest mystery is what changed to make it suddenly stop working the old way...

  • Oracle C++ Call Interface

    All of my company's software is coded in C++.
    Does the Oracle C++ Call Interface offer a bridge to allow Oracle Datawarehousing then thus implementation of ERP?
    Thanks

    Not sure what you are after...
    http://st-doc.us.oracle.com/11/112/appdev.112/e10764/introduction.htm#i430767
    Cheers
    David

  • New discussion forum for OCCI (Oracle C++ Call Interface)

    Hi all,
    let us use the new discussion forum 'Oracle C++ Call Interface' for all discussions regd. OCCI.

    You may want to post this on a database forum. This forum is dedicated to Oracle TopLink which connects to the database using JDBC.
    Doug

  • Error: sp2-0310 unable to open file c:\desktop\oracle\table.sql

    I am not able to open any files that I have downloaded and put into a file path. I keep getting the error sp2-0310 unable to open file. I made sure to save my files in a path with no spaces. What can I do to resolve this error message.
    Thanks.

    As already said, you need to verify you've really got the correct path. After that, you can also check to see that the file name is really table.sql. If you created the file in a simple text editor, sometimes the editor will append .txt to the file name. But if you have "Hide Extensions" turned on in Windows Explorer, then you wouldn't see the .txt extension. Check the file name and make sure it really is as you think and doesn't have another extension on it.
    Finally, how are you trying to use the file in SQL*Plus? If the path and file name are correct, you should be able to do this:
    SQL> get c:\desktop\oracle\table
    and it should bring up the file into the SQL*Plus buffer. Or, you should be able to use:
    SQL> @c:\desktop\oracle\table
    to execute the contents of the file.
    If you are simply using:
    SQL> @table
    then you could add the SQLPATH environment variable to point to c:\desktop\oracle and that would allow you to skip entering the path.
    Hope this helps,
    Karen

  • Unable to access Oracle XE Apex Interface

    Hello,
    I've recently installed Oracle XE on Ubuntu (package oracle-xe-universal_10.2.0.1-1.1_i386.deb), however I am unable to access the web interface for Apex. If I use Firefox or Opera, it cannot recognize the file it's trying to access, but reports it as an application/octet-stream file and asks me how to open it or to save it to disk. If I use IE7, it simply displays a few unknown characters (boxes).
    I had the entirety of Oracle XE installed and working prior to rebuilding the server, which is when this problem began happening, but I shouldn't have changed anything to cause a problem like this.
    If anyone can shed some light on this, I would greatly appreciate it, since I've been unsuccessful at finding anything out about this problem.
    Thanks,
    Jeff

    This is a bit old but I've faced the issue and found a (temporary?) solution.
    The problem is caused by a syntax error of the generated HTML on the Change Password page. The APEX page generation code somehow truncated a closing '>' in a tag. By adding a few space, this page generated correctly. However, it seems very likely that the problem will also occur for other pages.
    In file builder/f4350.sql, line 5668, change
      p_plug_source=> s,
    to
      p_plug_source=> s || '  ',
    Then reload the page... I used 'sys as sysdba' and not sure this is the best option. Anyway the page showed afterwards.
    Message was edited by: thtsang

Maybe you are looking for

  • Business Systems into ID

    Dear All, Could anyone please let me know how to import business systems Created in SLD into ID. one more clarification. if i add new business system to my existing landscape and i want to import to my ID, will it effect my existing scenarios which a

  • Screensaver not showing all photos in an iPhoto smart album

    Got a weird problem here, done some searching around but can't find a fix. I have created a smart album in iPhoto 11. This correctly displays 95 photos across multiple events, based on a string match to the event name. However, if I use this smart al

  • Function Module BAPI_ABSENCE_CREATE for creating leave request.

    Hi Experts, I am using FM BAPI_ABSENCE_CREATE for creating leave request. I am passing all the data into this as import parameter. When i am executing this return table gives statement  EPG184Employee/applicant is not locked yet Please let me know wh

  • Website works great in firefox, blank in IE

    first i am very new to html code. so this could be a very dumb problem. i created an html that has a tab spry. nothing else out of the ordinary. i previewed in Firefox while building it, worked great. checked browser compatibility, Dreamweaver showed

  • Specifying Content Type of the Response

    Can anyone enlist the different content type supported by browsers. In the Servlet, I need to set this to enable file download. My web application should supoort upload and download of files of any file type.