SP2 Installation Problem on Weblogic Server 6.1SP1
hi,
i encountered a problem installing sp2 to my second server.
(Windows 2000 Advance Server with SP2, dual Xeon CPU, 3GB, 200GB.
Weblogic Server 6.1 with SP1 installed at d:\bea) x 2
installation file itself is valid. as installation at server 1 was successful. however,
when installing at server 2:
1) by double clicking on the exe - blank GUI popup appeared on screen without any
usual text (first screen that reads: welcome - the installer will guide you....).
all three buttons were there. click on the next buttons all the way would give a
title 'installation complete' without any delay. sp2 was not installed.
2) by running exe from console - GUI popup appeared normally. however, when prompted
to select bea home, selecting the default folder at d:\bea and when clicking on next
button, a popup would appear claiming that weblogic server home is not found at d:\bea.
and process discontinued.
the beahomelist is found at c:\bea, with content reading correctly as d:\bea;c:\bea;
Previous SP1 installation on server 2 about 2 months back was successful.
would appreciate for ur input. thanks a lot in advance.
rgds, keigo
I've exactly the same problem and will attempt to reinstall WebLogic 6.1
with SP3 built-in ...
"keigo" <[email protected]> wrote in message
news:[email protected]..
>
update on the progress, spoke to a BEA staff from regional office and I aminformed
that this problem was never encountered and am advised to perform freshre-installation
with wlserver6.1 with sp2 built in.
"keigo" <[email protected]> wrote:
Hi Laurent,
Thank you very much for ur reply.
My Weblogic Server is installed in D:\bea. Just like the Server 1
configuration.
And I m choosing to install SP2 into this existing home.
I am kind of worried by this as it is nearing production and I am running
into this
weird problem here.
Thanks again.
Rgds, keigo
Laurent Goldsztejn <[email protected]> wrote:
Hello Keigo,
It seems that the problem comes when your server is installed in the
directory where the beahomelist file is located. Am I correct when I
assume that the installation fails when you install the service pack 2
over the server installed in c:\bea?
Thank you,
Laurent Goldsztejn
Developer Relations Engineer
BEA Support
Similar Messages
-
Installation Problem of weblogic server on Linux
Hi,I want to install weblogic server on linux but it is raising various exception such as-------------------------------------------java.lang.Class.forName0(Native)java.awt.windowcom.zerog.ia.installer.Main.bjava.lang.reflect.Method.invokecom.zerog.lax.LAX.launchcom.zerog.lax.LAX.MainI am not able to understand kinldy help me to resolve this issue.RegardsBhagat Singh
yeah it was unzip that's why, but now I did change it the name of zip file to wls1033_generic.jar and I did past it in c: but when I am writing the statment c:/> java -Xmx1024m -jar wls1033_generic.jar then I got the message unable to access jarfile wls1033_generic.jar
is it a problem that the java folder is in program file and i am accessing in directly in c:
can any one tell me the complete procedure of installing weblogic.
thanks
imran
Edited by: 875581 on 10-Aug-2011 22:37 -
Installation problem for Weblogic Server 1035 Generic
Running 11G database on Win 2008 Server 64 bit. I downloaded the 1035 version of Weblogic, following the step by step installation guide provided by Oracle Support and additional documentation such as:
http://download.oracle.com/docs/cd/E2176http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls4_01/install.1111/e12001/toc.htm
The installation was successful and I proceeded to create a test domain (dummy_domain) to test if the installation was able to receive http requests. I started the admin server. In Internet Explorer I then entered:
http://localhost:7001/
and got the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Any advice as to where I could be going wrong would be greatly appreciated. Thanks, JPierluigi,
Thanks a lot for pointing this out. I was foolishly following the reference at the end of the installation process which ommitted the 'console' word. Thanks again! J -
Problem downloading WebLogic Server 8
I am having problems downloadingl the eval copy of Weblogic server 8. The'Specify
Download Options' page in the Weblogic installer doesnt request proxy server authentication
information (userid, password). Is there a way to work around this issue and successfully
download the software.
thanks
-vinny"Tanguy" == Tanguy Le Berre <[email protected]> writes:
Tanguy> I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
Tanguy> I use the following instruction: ./filename.bin and I see the following message:
Tanguy> Illegal instruction (memory dumped)
Tanguy> (in french: instruction incorrecte (vidage memoire))
Tanguy> A core file is generated but it doesn't help resolving this problem. It seems
Tanguy> to be talking about unzip, as I found things like this message in this file:
Tanguy> error: cannot allocate unzip buffers
Tanguy> unzipsfx: cannot find myself! [%s]
Tanguy> error [%s]: missing %ld bytes in zipfile
Tanguy> I also tryed to install weblogic server 8.10 and no core file is generated but
Tanguy> I have the following message:
Tanguy> error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
Tanguy> zipfile
Tanguy> (attempting to process anyway)
Tanguy> ** Error during init, error code = 2.
Tanguy> I first thought the file I downloaded was incomplete, so I downloaded it again
Tanguy> but I still have the same problem. Can anyone help me? What have I forgotten to
Tanguy> do?
Well, perhaps one thing you've forgotten is that it's better to write notes
about particular problems in the newsgroup or mailing list that is most
appropriate to the problem. If people who read this newsgroup only know about
the webserver, then they won't have any idea how to help you with installation
problems with WebLogic server, which this clearly is (the "webserver" is not
"WebLogic Server", but only part of the entire package).
Have you made an attempt to contact BEA support? It seems likely that your zip
file is corrupt.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD; SCBCD -
Problem installing weblogic server 8.11
I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
I use the following instruction: ./filename.bin and I see the following message:
Illegal instruction (memory dumped)
(in french: instruction incorrecte (vidage memoire))
A core file is generated but it doesn't help resolving this problem. It seems
to be talking about unzip, as I found things like this message in this file:
error: cannot allocate unzip buffers
unzipsfx: cannot find myself! [%s]
error [%s]: missing %ld bytes in zipfile
I also tryed to install weblogic server 8.10 and no core file is generated but
I have the following message:
error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
zipfile
(attempting to process anyway)
** Error during init, error code = 2.
I first thought the file I downloaded was incomplete, so I downloaded it again
but I still have the same problem. Can anyone help me? What have I forgotten to
do?
Thank you
Tanguy Le Berre"Tanguy" == Tanguy Le Berre <[email protected]> writes:
Tanguy> I have a problem while installing weblogic server 8.11 on a solaris 9 machine.
Tanguy> I use the following instruction: ./filename.bin and I see the following message:
Tanguy> Illegal instruction (memory dumped)
Tanguy> (in french: instruction incorrecte (vidage memoire))
Tanguy> A core file is generated but it doesn't help resolving this problem. It seems
Tanguy> to be talking about unzip, as I found things like this message in this file:
Tanguy> error: cannot allocate unzip buffers
Tanguy> unzipsfx: cannot find myself! [%s]
Tanguy> error [%s]: missing %ld bytes in zipfile
Tanguy> I also tryed to install weblogic server 8.10 and no core file is generated but
Tanguy> I have the following message:
Tanguy> error [export/home/tleberre/net_server810_solaris32.bin]: missing 570 byes in
Tanguy> zipfile
Tanguy> (attempting to process anyway)
Tanguy> ** Error during init, error code = 2.
Tanguy> I first thought the file I downloaded was incomplete, so I downloaded it again
Tanguy> but I still have the same problem. Can anyone help me? What have I forgotten to
Tanguy> do?
Well, perhaps one thing you've forgotten is that it's better to write notes
about particular problems in the newsgroup or mailing list that is most
appropriate to the problem. If people who read this newsgroup only know about
the webserver, then they won't have any idea how to help you with installation
problems with WebLogic server, which this clearly is (the "webserver" is not
"WebLogic Server", but only part of the entire package).
Have you made an attempt to contact BEA support? It seems likely that your zip
file is corrupt.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] ; SCJP; SCWCD; SCBCD -
Problems starting WebLogic server in Jdeveloper 11.1.2.1.0
I'm having an issue converting an application that was developed to run under OAS to use WebLogic Server. I downloaded Jdeveloper 11.1.2.1.0, configured the integrated server and the default domain, and then I try to start the server. The server starts but during the startup process I receive this exception:
java.lang.NoSuchMethodError: org.w3c.dom.Element.getTextContent()Ljava/lang/String;
at oracle.security.audit.config.XMLContext.getTextContent(XMLContext.java:136)
at oracle.security.audit.config.Attribute.<init>(Attribute.java:194)
at oracle.security.audit.config.CommonAttributes.<init>(CommonAttributes.java:63)
at oracle.security.audit.config.EventDefinitionList.<init>(EventDefinitionList.java:122)
at oracle.security.audit.config.AuditConfig.readGenericEvents(AuditConfig.java:612)
at oracle.security.audit.config.AuditConfig.loadEvents(AuditConfig.java:1071)
at oracle.security.audit.Auditor.<init>(Auditor.java:214)
This then affects the deployment and execution of the web app. Does anyone have any advice or a cure for this problem? We have the org.w3c.dom.Element class in the xmlparserv2.jar file that we have external to Jdev but all those seem to be earlier than Java 1.5, because they don't have the getTextContent() method.
Thanks,
SharonWhich operating system you are running on?Windows 7
Have you tired to move the user directory to a path without spaces?No spaces in any paths that I can see.
Look for the system11.1.1.xxxx folder and remove or rename it. Jdev created the folder from scratch next time you start.Done that, multiple times (folder is system11.1.2.1.38.60.81). When we first started seeing this error, that was the advice that many people gave in various discussion groups. We were working in an older version of Jdeveloper at that time. So then I downloaded the latest Jdev installation from the Oracle download site, thinking that maybe the older version had an older JDK embedded. I've installed twice now, once with using the embedded Sun JDK of 1.6.0_24 and once using our own separately downloaded version of 1.6.0_24 and I get the error in either case.
You are correct that it is probably an installation problem, but I have no idea what it could be.
Sharon -
Problem installing weblogic server 7.0 in Mandrake Linux 10.1
hi
i am very new to Mandrake Linux ..i have installed Mandrake Linux 10.1 in my machine ...the problem is that when i try i to install weblogic server 7.0 it gives some error
** Error during execution, error code = 11
my machine spec
* 512MB RAM
* 40GB HDD
* P4 2.8GHZ
can any one help me..
the weblogic server i downloaded from bea site its version is weblogic server 7.0 with jrockit (sp6)
regards
babuHi,
first of all, unfortunately, WebLogic Server is not supported under Mandrivia (use the right name ;-) ), so you should use Novell Suse or Redhat AS, check this list
Anyway, error code 11 should be related to permission issues, so you should check that the user you are using is allowed to write under the installation directory and under /var/log/
Could you kindly post the log messages?
Regards.
Antenore Gatta
Middleware Specialist
Hequa S.r.l
C.so Buenos Aires 77
20124 Milano
http://www.Hequa.it
Tel +39(0)267493078
Fax +39(0)267493079
Mobile +39 3481537897
______________________________________ -
Installation problem on windows server 2008 r2 datacenter edition 64bit
hi
today, i tried to install the current maxdb 7.8 release on my virtual server with a windows server 2008 r2 datacenter 64bit edition os. at the first installation, i got an error message something with "rte runtime error". at this point, the installation stopped.
because of this error, i tried to uninstall the failed installation. this was not possible, in the uninstaller, i didn't see any components, so i can't uninstall.
so i tried to delete the files manually: the entries in the start menu, and the application's path under "program files"... first, i need to kill a process named "serv.exe", that creates a tcp daemon under port 7200... after killing it, the deletion of the dir in program files was successful.
this is very very weird, now my server is "contaminated" with an uncomplete uninstallation of maxdb...
why maxdb 7.8 has problems on windows server 2008 r2 datacenter 64bit edition???
thanks for feedbacks!
regards, jan> no, because i canceled this virtual server - another method to solve this problem. (i have really no time for things like that..!)
If you take the time to give exact error messages then someone will be certainly able to help
> on windows server 2003, there are NO problems.
Windows 2003 != Windows 2008 - they use a different kernel, a different security system (UAC) and other features that may prevent a succesfull installation in the first place.
I installed a MaxDB 7.8 just today on Windows 2008 R2 and it worked fine.
Markus -
Installation problem of Weblogic 5.1 on Tru64 5.1
It has been mentioned in Release notes that Weblogic 5.1 works with jdk1.2.2
on Tru64 Unix version 5.1.
The following were the activities carried out on Compaq Tru64 OS :
1.Weblogic 5.1 server and Weblogic 5.1 SP8 has been downloaded (specifying the
option for non Win32 users while downloading) from BEA website and unzipped
using the jar utility.
2.OS version used is
$ uname -a
OSF1 xp1000 V5.1 732 alpha
3.java version used is "1.2.2-6"
Classic VM (build J2SDK.v.1.2.2:04/26/2000-09:58, native threads, jit_122).
4.The PATH and LD_LIBRARY_PATH environmental variables are set to :
echo $PATH
.:/usr/bin:/usr/opt/java122/bin
$ echo $LD_LIBRARY_PATH
/usr/lib:/weblogic/lib/tru64unix:/weblogic/lib:/usr/opt/java122/bin
5.Java class path has been updated to include Path of weblogic510sp8boot.jar
and Weblogic class path has been updated to include weblogic510sp8.jar as
recommended in the service pack release notes.
6.The options recommended (to resolve known issues with Compaq Alpha on
Weblogic 5.1)in BEA site has also been taken care in java startup
script in startWebLogic.sh.
Known Issues with Compaq Alpha on WebLogic 5.1 (as in Bea site)
JDK 1.2.2 is a supported JVM when using Weblogic 5.1 on a Tru64 Unix platform.
However, the WebLogic Server's startup script needs to be modified in order
for the server to start properly. The JIT(Just-In-Time compiler) must be
turned off; whereby the -Djava.compiler directive needs to be passed to the
JVM and the JIT disabled.
For example:
/usr/opt/java122/bin/java -Djava.compiler= -ms128m -mx128m -classpath
./classes/boot -Dweblogic.class.path=./license:./classes:./lib/weblogicaux.jar:
./myserver/serverclasses -Djava.security.manager -Djava.security.policy==
weblogic.policy weblogic.Server
The error observed while starting the script startweblogic.sh is :
$ ./startWebLogic.sh
LD_LIST=/weblogic/lib/tru64unix
2224:/bin/ksh: /sbin/loader: Fatal Error: Cannot map library /weblogic/lib/tru64unix
7. The files existent in this directory are :
weblogic/lib/tru64unix
$ ls
libmuxer.so libwlenv.so zac_tru64unix
libproxy.so mod_wl.so zac_tru64unix_g
libweblogicunix1.so oci805_7
[problem.txt]Can you post your startWebLogic.sh script?
BALAKRISHNAN GANESH wrote:
It has been mentioned in Release notes that Weblogic 5.1 works with jdk1.2.2
on Tru64 Unix version 5.1.
The following were the activities carried out on Compaq Tru64 OS :
1.Weblogic 5.1 server and Weblogic 5.1 SP8 has been downloaded (specifying the
option for non Win32 users while downloading) from BEA website and unzipped
using the jar utility.
2.OS version used is
$ uname -a
OSF1 xp1000 V5.1 732 alpha
3.java version used is "1.2.2-6"
Classic VM (build J2SDK.v.1.2.2:04/26/2000-09:58, native threads, jit_122).
4.The PATH and LD_LIBRARY_PATH environmental variables are set to :
echo $PATH
.:/usr/bin:/usr/opt/java122/bin
$ echo $LD_LIBRARY_PATH
/usr/lib:/weblogic/lib/tru64unix:/weblogic/lib:/usr/opt/java122/bin
5.Java class path has been updated to include Path of weblogic510sp8boot.jar
and Weblogic class path has been updated to include weblogic510sp8.jar as
recommended in the service pack release notes.
6.The options recommended (to resolve known issues with Compaq Alpha on
Weblogic 5.1)in BEA site has also been taken care in java startup
script in startWebLogic.sh.
Known Issues with Compaq Alpha on WebLogic 5.1 (as in Bea site)
JDK 1.2.2 is a supported JVM when using Weblogic 5.1 on a Tru64 Unix platform.
However, the WebLogic Server's startup script needs to be modified in order
for the server to start properly. The JIT(Just-In-Time compiler) must be
turned off; whereby the -Djava.compiler directive needs to be passed to the
JVM and the JIT disabled.
For example:
/usr/opt/java122/bin/java -Djava.compiler= -ms128m -mx128m -classpath
/classes/boot -Dweblogic.class.path=./license:./classes:./lib/weblogicaux.jar:
/myserver/serverclasses -Djava.security.manager -Djava.security.policy==
weblogic.policy weblogic.Server
The error observed while starting the script startweblogic.sh is :
$ ./startWebLogic.sh
LD_LIST=/weblogic/lib/tru64unix
2224:/bin/ksh: /sbin/loader: Fatal Error: Cannot map library /weblogic/lib/tru64unix
7. The files existent in this directory are :
weblogic/lib/tru64unix
$ ls
libmuxer.so libwlenv.so zac_tru64unix
libproxy.so mod_wl.so zac_tru64unix_g
libweblogicunix1.so oci805_7
Name: problem.txt
problem.txt Type: Plain Text (text/plain)
Encoding: base64 -
Connection Pooling problem in Weblogic Server 6.1
Hi
We are using weblogic server 6.1 sp3. The server creates three database connection
pools (details available in the attached config.xml).
The database has a regular downtime every day for a few hours. We are running
the server as a windows service. As per the "RefreshMinutes" property, the server
should be able to get new fresh connections once the database comes up. But in
our case it is not doing so. Once the database comes up after its regular downtime:
-- Sometimes the server does not respond as in we are not able to open the console
page.
-- Any client that tries connecting to the database thru the server gets blocked
and does not respond.
-- The log file(weblogic.log) does not get updated after some time.
Can someone suggest why the server is showing such a behaviour??
Could it be anything related to the DBMS setting or to the local machine's settings
? Following is the thread dump after the server stops responding:
Full thread dump:
"ListenThread" prio=5 tid=0x14ffb570 nid=0x148c runnable [0x1685f000..0x1685fdbc]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:468)
at java.net.ServerSocket.implAccept(ServerSocket.java:243)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:26)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:260)
"Thread-3" daemon prio=5 tid=0x14fb18b8 nid=0x12d4 waiting on monitor [0x167df000..0x167dfdbc]
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:95)
"Thread-2" daemon prio=5 tid=0x14f21c68 nid=0xf08 waiting on monitor [0x1679f000..0x1679fdbc]
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:95)
"Thread-1" daemon prio=5 tid=0x14fb97d8 nid=0xcac waiting on monitor [0x1675f000..0x1675fdbc]
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:95)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e75a10
nid=0x13ec waiting on monitor [0x1671f000..0x1671fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e74e58
nid=0x1434 waiting on monitor [0x166df000..0x166dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e742a0
nid=0x1154 waiting on monitor [0x1669f000..0x1669fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e72ed0
nid=0xfe4 waiting on monitor [0x1665f000..0x1665fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e72318
nid=0x9a4 waiting on monitor [0x1661f000..0x1661fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e717d8 nid=0xf38
waiting on monitor [0x165df000..0x165dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e70c98 nid=0xf68
waiting on monitor [0x1659f000..0x1659fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e70158 nid=0x1008
waiting on monitor [0x1655f000..0x1655fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6f610 nid=0x1204
waiting on monitor [0x1651f000..0x1651fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6ead0 nid=0xef4
waiting on monitor [0x164df000..0x164dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6dfa8 nid=0x12bc
waiting on monitor [0x1649f000..0x1649fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6d5e8 nid=0xf70
waiting on monitor [0x1645f000..0x1645fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6ccb0 nid=0xf84
waiting on monitor [0x1641f000..0x1641fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e67510 nid=0x1418
waiting on monitor [0x163df000..0x163dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e64f60 nid=0x1228
waiting on monitor [0x1639f000..0x1639fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemon prio=5
tid=0x14e5c3f0 nid=0xf60 waiting on monitor [0x1635f000..0x1635fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemon prio=5
tid=0x14e5b908 nid=0xf78 waiting on monitor [0x1631f000..0x1631fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemon prio=5
tid=0x14e3ebe0 nid=0xfb4 waiting on monitor [0x162df000..0x162dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14e35958
nid=0x9e8 waiting on monitor [0x1629f000..0x1629fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14e3ba30
nid=0x5ac waiting on monitor [0x1625f000..0x1625fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14e3af20
nid=0xdc4 waiting on monitor [0x1621f000..0x1621fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14e3a410
nid=0x11ec waiting on monitor [0x161df000..0x161dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14bfdff0
nid=0x1078 waiting on monitor [0x1619f000..0x1619fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14bfd4e0
nid=0x43c waiting on monitor [0x1615f000..0x1615fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14e32410
nid=0xb64 waiting on monitor [0x1611f000..0x1611fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14c4ee68
nid=0xe30 waiting on monitor [0x160df000..0x160dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14c4ec10
nid=0x1140 waiting on monitor [0x1609f000..0x1609fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemon prio=5 tid=0x14e33b18
nid=0xfc0 waiting on monitor [0x1605f000..0x1605fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemon prio=5 tid=0x14e33968
nid=0x718 waiting on monitor [0x1601f000..0x1601fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemon prio=5 tid=0x14e3c0a0
nid=0x119c waiting on monitor [0x15fdf000..0x15fdfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=5 tid=0x14bfbce0 nid=0xb90 waiting on monitor
[0x15f9f000..0x15f9fdbc]
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '1' for queue: '_weblogic_dgc_queue'" daemon prio=5 tid=0x14e39758
nid=0x11ac waiting on monitor [0x15f5f000..0x15f5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '_weblogic_dgc_queue'" daemon prio=5 tid=0x14e38898
nid=0x1194 waiting on monitor [0x15f1f000..0x15f1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=5 tid=0x14bfc040 nid=0x10a8 waiting on monitor
[0x15edf000..0x15edfdbc]
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=5 tid=0x14e30c40 nid=0x794 waiting on monitor
[0x15e9f000..0x15e9fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.java:57)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '29' for queue: 'default'" daemon prio=5 tid=0x14e2fe20 nid=0xee8
runnable [0x15e5f000..0x15e5fdbc]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:90)
at oracle.net.ns.Packet.receive(Unknown Source)
at oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:931)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:369)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:830)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2391)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2672)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:572)
at weblogic.jdbc.pool.Statement.executeQuery(Statement.java:850)
at tavant.platform.jdbc.JDBCTransaction.executeReadQuery(Unknown Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean.invokeSQL(Unknown
Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean_t63yf9_EOImpl.invokeSQL(WebServiceBean_t63yf9_EOImpl.java:456)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.soap.server.servlet.StatelessBeanAdapter.invokeMethod(StatelessBeanAdapter.java:184)
at weblogic.soap.server.servlet.StatelessBeanAdapter.doPost(StatelessBeanAdapter.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2637)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2359)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '28' for queue: 'default'" daemon prio=5 tid=0x14e2f268 nid=0x12f0
runnable [0x15e1f000..0x15e1fdbc]
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:589)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '27' for queue: 'default'" daemon prio=5 tid=0x14be7af0 nid=0x11c4
runnable [0x15ddf000..0x15ddfdbc]
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:589)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '26' for queue: 'default'" daemon prio=5 tid=0x14be7748 nid=0x6dc
waiting for monitor entry [0x15d9f000..0x15d9fdbc]
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:681)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:520)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:405)
at weblogic.common.internal.ResourceAllocator.reserveWaitSecs(ResourceAllocator.java:395)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:163)
at weblogic.jdbc.common.internal.ConnectionPool.reserveWaitSecs(ConnectionPool.java:117)
at weblogic.jdbc.pool.Driver.connect(Driver.java:152)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:199)
at tavant.platform.jdbc.JDBCTransaction.getConnection(Unknown Source)
at tavant.platform.jdbc.JDBCTransaction.start(Unknown Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean.invokeSQL(Unknown
Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean_t63yf9_EOImpl.invokeSQL(WebServiceBean_t63yf9_EOImpl.java:456)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.soap.server.servlet.StatelessBeanAdapter.invokeMethod(StatelessBeanAdapter.java:184)
at weblogic.soap.server.servlet.StatelessBeanAdapter.doPost(StatelessBeanAdapter.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2637)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2359)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '25' for queue: 'default'" daemon prio=5 tid=0x14be6b90 nid=0x10f4
waiting for monitor entry [0x15d5f000..0x15d5fdbc]
at java.sql.DriverManager.println(DriverManager.java:424)
at java.sql.SQLException.<init>(SQLException.java:44)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:333)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:404)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:197)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.refreshResource(ConnectionEnvFactory.java:270)
at weblogic.jdbc.common.internal.ConnectionEnv.refresh(ConnectionEnv.java:919)
at weblogic.common.internal.ResourceAllocator.resetThisOne(ResourceAllocator.java:885)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:486)
at weblogic.common.internal.ResourceAllocator.reserveUnused(ResourceAllocator.java:381)
at weblogic.common.internal.ResourceAllocator.trigger(ResourceAllocator.java:1125)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:69)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '24' for queue: 'default'" daemon prio=5 tid=0x14be5fd8 nid=0x10a4
waiting on monitor [0x15d1f000..0x15d1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '23' for queue: 'default'" daemon prio=5 tid=0x14be5420 nid=0x11b0
waiting on monitor [0x15cdf000..0x15cdfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '22' for queue: 'default'" daemon prio=5 tid=0x14be4868 nid=0x11bc
waiting for monitor entry [0x15c9f000..0x15c9fdbc]
at java.sql.DriverManager.println(DriverManager.java:424)
at java.sql.SQLException.<init>(SQLException.java:44)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConnection.java:758)
at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.java:712)
at weblogic.jdbc.common.internal.ConnectionEnv.test(ConnectionEnv.java:977)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:470)
at weblogic.common.internal.ResourceAllocator.reserveUnused(ResourceAllocator.java:381)
at weblogic.common.internal.ResourceAllocator.trigger(ResourceAllocator.java:1125)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:69)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '21' for queue: 'default'" daemon prio=5 tid=0x14be3cb0 nid=0x10e0
waiting on monitor [0x15c5f000..0x15c5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '20' for queue: 'default'" daemon prio=5 tid=0x14be30f8 nid=0x620
waiting on monitor [0x15c1f000..0x15c1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '19' for queue: 'default'" daemon prio=5 tid=0x14be2540 nid=0x350
waiting on monitor [0x15bdf000..0x15bdfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '18' for queue: 'default'" daemon prio=5 tid=0x14be1988 nid=0x104c
waiting on monitor [0x15b9f000..0x15b9fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '17' for queue: 'default'" daemon prio=5 tid=0x14c4db30 nid=0xff0
waiting on monitor [0x15b5f000..0x15b5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '16' for queue: 'default'" daemon prio=5 tid=0x14c4cf78 nid=0x1148
waiting on monitor [0x15b1f000..0x15b1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '15' for queue: 'default'" daemon prio=5 tid=0x14c4c3c0 nid=0x1118
waiting on monitor [0x15adf000..0x15adfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '14' for queue: 'default'" daemon prio=5 tid=0x14c4b808 nid=0x684
waiting on monitor [0x15a9f000..0x15a9fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'default'" daemon prio=5 tid=0x14c4ac50 nid=0xd7c
waiting on monitor [0x15a5f000..0x15a5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'default'" daemon prio=5 tid=0x14c4a098 nid=0xdb4
waiting on monitor [0x15a1f000..0x15a1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'default'" daemon prio=5 tid=0x14c49588 nid=0x114c
waiting on monitor [0x159df000..0x159dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'default'" daemon prio=5 tid=0x14bdf540 nid=0x90c
waiting on monitor [0x1599f000..0x1599fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'default'" daemon prio=5 tid=0x14bdea00 nid=0x11cc
waiting on monitor [0x1595f000..0x1595fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'default'" daemon prio=5 tid=0x14bdded8 nid=0x12f8
waiting on monitor [0x1591f000..0x1591fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'default'" daemon prio=5 tid=0x14ba0420 nid=0x1350
waiting on monitor [0x158df000..0x158dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'default'" daemon prio=5 tid=0x14bfae20 nid=0x11d8
waiting on monitor [0x1589f000..0x1589fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'default'" daemon prio=5 tid=0x14b9e6a8 nid=0x134c
waiting on monitor [0x1585f000..0x1585fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'default'" daemon prio=5 tid=0x14b9e430 nid=0x10bc
waiting on monitor [0x1581f000..0x1581fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'default'" daemon prio=5 tid=0x14bdbc00 nid=0x1090
waiting on monitor [0x157df000..0x157dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420Hi Joseph,
Thanks for your useful suggestion.
BTW, I am attaching the config.xml for your
convenience.
Please go through and let us know if anything
to be tuned.
Regards.
Kunal
Joseph Weinstein <[email protected]> wrote:
>
>
Kunal Jain wrote:
Hi
We are using weblogic server 6.1 sp3. The server creates three databaseconnection
pools (details available in the attached config.xml).
The database has a regular downtime every day for a few hours. We arerunning
the server as a windows service. As per the "RefreshMinutes" property,the server
should be able to get new fresh connections once the database comesup. But in
our case it is not doing so. Once the database comes up after its regulardowntime:
-- Sometimes the server does not respond as in we are not able toopen the console
page.
-- Any client that tries connecting to the database thru the servergets blocked
and does not respond.
-- The log file(weblogic.log) does not get updated after some time.
Can someone suggest why the server is showing such a behaviour??
Could it be anything related to the DBMS setting or to the local machine'ssettings
? Following is the thread dump after the server stops responding:Hi. I do see a problem in the thread dump. The application code is calling
java.sql.DriverManager
calls, which are a serious problem in multithreaded applications like
weblogic, because
DriverManager calls are all class-synchronized! All JDBC drivers and
the SQLException constructor
call DriverManager calls all the time, so a single long-running call
to DriverManager.getConnection()
can stop all other JDBC in the whole JVM. One problem you can fix is
at:
at tavant.platform.jdbc.JDBCTransaction.getConnection(Unknown Source)
at tavant.platform.jdbc.JDBCTransaction.start(Unknown Source)
The getConnection() method should be altered to instantiate a Driver
object and
call Driver.connect() directly to make a pool connection, avoiding the
DriverManager
call:
Driver d = (Driver)Class.forName("weblogic.jdbc.pool.Driver").newInstance();
Connection c = d.connect("jdbc:weblogic:pool:" + myPoolName, null );
Let me know if you can make this application change and whether it fixes
the
problem or not.
I could also help if I could see the config.xml, but you seem to have
attached the
startup script.
Joe Weinstein
Full thread dump:
"ListenThread" prio=5 tid=0x14ffb570 nid=0x148c runnable [0x1685f000..0x1685fdbc]
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:468)
at java.net.ServerSocket.implAccept(ServerSocket.java:243)
at java.net.ServerSocket.accept(ServerSocket.java:222)
at weblogic.socket.WeblogicServerSocket.accept(WeblogicServerSocket.java:26)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java:260)
"Thread-3" daemon prio=5 tid=0x14fb18b8 nid=0x12d4 waiting on monitor[0x167df000..0x167dfdbc]
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:95)
"Thread-2" daemon prio=5 tid=0x14f21c68 nid=0xf08 waiting on monitor[0x1679f000..0x1679fdbc]
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:95)
"Thread-1" daemon prio=5 tid=0x14fb97d8 nid=0xcac waiting on monitor[0x1675f000..0x1675fdbc]
at java.lang.Thread.sleep(Native Method)
at org.apache.log4j.helpers.FileWatchdog.run(FileWatchdog.java:95)
"ExecuteThread: '14' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e75a10
nid=0x13ec waiting on monitor [0x1671f000..0x1671fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '13' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e74e58
nid=0x1434 waiting on monitor [0x166df000..0x166dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '12' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e742a0
nid=0x1154 waiting on monitor [0x1669f000..0x1669fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '11' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e72ed0
nid=0xfe4 waiting on monitor [0x1665f000..0x1665fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '10' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e72318
nid=0x9a4 waiting on monitor [0x1661f000..0x1661fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e717d8nid=0xf38
waiting on monitor [0x165df000..0x165dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e70c98nid=0xf68
waiting on monitor [0x1659f000..0x1659fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e70158nid=0x1008
waiting on monitor [0x1655f000..0x1655fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6f610nid=0x1204
waiting on monitor [0x1651f000..0x1651fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6ead0nid=0xef4
waiting on monitor [0x164df000..0x164dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6dfa8nid=0x12bc
waiting on monitor [0x1649f000..0x1649fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6d5e8nid=0xf70
waiting on monitor [0x1645f000..0x1645fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e6ccb0nid=0xf84
waiting on monitor [0x1641f000..0x1641fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e67510nid=0x1418
waiting on monitor [0x163df000..0x163dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'JmsDispatcher'" daemon prio=5 tid=0x14e64f60nid=0x1228
waiting on monitor [0x1639f000..0x1639fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: 'weblogic.transaction.AsyncQueue'" daemonprio=5
tid=0x14e5c3f0 nid=0xf60 waiting on monitor [0x1635f000..0x1635fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: 'weblogic.transaction.AsyncQueue'" daemonprio=5
tid=0x14e5b908 nid=0xf78 waiting on monitor [0x1631f000..0x1631fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: 'weblogic.transaction.AsyncQueue'" daemonprio=5
tid=0x14e3ebe0 nid=0xfb4 waiting on monitor [0x162df000..0x162dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14e35958
nid=0x9e8 waiting on monitor [0x1629f000..0x1629fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '8' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14e3ba30
nid=0x5ac waiting on monitor [0x1625f000..0x1625fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '7' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14e3af20
nid=0xdc4 waiting on monitor [0x1621f000..0x1621fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '6' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14e3a410
nid=0x11ec waiting on monitor [0x161df000..0x161dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '5' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14bfdff0
nid=0x1078 waiting on monitor [0x1619f000..0x1619fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '4' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14bfd4e0
nid=0x43c waiting on monitor [0x1615f000..0x1615fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '3' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14e32410
nid=0xb64 waiting on monitor [0x1611f000..0x1611fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '2' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14c4ee68
nid=0xe30 waiting on monitor [0x160df000..0x160dfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14c4ec10
nid=0x1140 waiting on monitor [0x1609f000..0x1609fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_rmi_queue'" daemonprio=5 tid=0x14e33b18
nid=0xfc0 waiting on monitor [0x1605f000..0x1605fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '1' for queue: '__weblogic_admin_html_queue'" daemonprio=5 tid=0x14e33968
nid=0x718 waiting on monitor [0x1601f000..0x1601fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'" daemonprio=5 tid=0x14e3c0a0
nid=0x119c waiting on monitor [0x15fdf000..0x15fdfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=5 tid=0x14bfbce0 nid=0xb90 waitingon monitor
[0x15f9f000..0x15f9fdbc]
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '1' for queue: '_weblogic_dgc_queue'" daemon prio=5tid=0x14e39758
nid=0x11ac waiting on monitor [0x15f5f000..0x15f5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '0' for queue: '_weblogic_dgc_queue'" daemon prio=5tid=0x14e38898
nid=0x1194 waiting on monitor [0x15f1f000..0x15f1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"TimeEventGenerator" daemon prio=5 tid=0x14bfc040 nid=0x10a8 waitingon monitor
[0x15edf000..0x15edfdbc]
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java:279)
at weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java:138)
at java.lang.Thread.run(Thread.java:484)
"SpinnerRandomSource" daemon prio=5 tid=0x14e30c40 nid=0x794 waitingon monitor
[0x15e9f000..0x15e9fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.security.SpinnerRandomBitsSource.run(SpinnerRandomBitsSource.java:57)
at java.lang.Thread.run(Thread.java:484)
"ExecuteThread: '29' for queue: 'default'" daemon prio=5 tid=0x14e2fe20nid=0xee8
runnable [0x15e5f000..0x15e5fdbc]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:90)
at oracle.net.ns.Packet.receive(Unknown Source)
at oracle.net.ns.NetInputStream.getNextPacket(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.net.ns.NetInputStream.read(Unknown Source)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:931)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:893)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:369)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1891)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:830)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2391)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2672)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:572)
at weblogic.jdbc.pool.Statement.executeQuery(Statement.java:850)
at tavant.platform.jdbc.JDBCTransaction.executeReadQuery(UnknownSource)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean.invokeSQL(Unknown
Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean_t63yf9_EOImpl.invokeSQL(WebServiceBean_t63yf9_EOImpl.java:456)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.soap.server.servlet.StatelessBeanAdapter.invokeMethod(StatelessBeanAdapter.java:184)
at weblogic.soap.server.servlet.StatelessBeanAdapter.doPost(StatelessBeanAdapter.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2637)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2359)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '28' for queue: 'default'" daemon prio=5 tid=0x14e2f268nid=0x12f0
runnable [0x15e1f000..0x15e1fdbc]
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:589)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '27' for queue: 'default'" daemon prio=5 tid=0x14be7af0nid=0x11c4
runnable [0x15ddf000..0x15ddfdbc]
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:589)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '26' for queue: 'default'" daemon prio=5 tid=0x14be7748nid=0x6dc
waiting for monitor entry [0x15d9f000..0x15d9fdbc]
at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java:681)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:520)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:405)
at weblogic.common.internal.ResourceAllocator.reserveWaitSecs(ResourceAllocator.java:395)
at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:163)
at weblogic.jdbc.common.internal.ConnectionPool.reserveWaitSecs(ConnectionPool.java:117)
at weblogic.jdbc.pool.Driver.connect(Driver.java:152)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:199)
at tavant.platform.jdbc.JDBCTransaction.getConnection(UnknownSource)
at tavant.platform.jdbc.JDBCTransaction.start(Unknown Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean.invokeSQL(Unknown
Source)
at tavant.custom.iri.erpconnector.b2bi.communication.receiver.webservice.WebServiceBean_t63yf9_EOImpl.invokeSQL(WebServiceBean_t63yf9_EOImpl.java:456)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.soap.server.servlet.StatelessBeanAdapter.invokeMethod(StatelessBeanAdapter.java:184)
at weblogic.soap.server.servlet.StatelessBeanAdapter.doPost(StatelessBeanAdapter.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:262)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:198)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2637)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2359)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '25' for queue: 'default'" daemon prio=5 tid=0x14be6b90nid=0x10f4
waiting for monitor entry [0x15d5f000..0x15d5fdbc]
at java.sql.DriverManager.println(DriverManager.java:424)
at java.sql.SQLException.<init>(SQLException.java:44)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:333)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:404)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java:468)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:314)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:197)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.refreshResource(ConnectionEnvFactory.java:270)
at weblogic.jdbc.common.internal.ConnectionEnv.refresh(ConnectionEnv.java:919)
at weblogic.common.internal.ResourceAllocator.resetThisOne(ResourceAllocator.java:885)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:486)
at weblogic.common.internal.ResourceAllocator.reserveUnused(ResourceAllocator.java:381)
at weblogic.common.internal.ResourceAllocator.trigger(ResourceAllocator.java:1125)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:69)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '24' for queue: 'default'" daemon prio=5 tid=0x14be5fd8nid=0x10a4
waiting on monitor [0x15d1f000..0x15d1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '23' for queue: 'default'" daemon prio=5 tid=0x14be5420nid=0x11b0
waiting on monitor [0x15cdf000..0x15cdfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '22' for queue: 'default'" daemon prio=5 tid=0x14be4868nid=0x11bc
waiting for monitor entry [0x15c9f000..0x15c9fdbc]
at java.sql.DriverManager.println(DriverManager.java:424)
at java.sql.SQLException.<init>(SQLException.java:44)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConnection.java:758)
at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.java:712)
at weblogic.jdbc.common.internal.ConnectionEnv.test(ConnectionEnv.java:977)
at weblogic.common.internal.ResourceAllocator.reserve(ResourceAllocator.java:470)
at weblogic.common.internal.ResourceAllocator.reserveUnused(ResourceAllocator.java:381)
at weblogic.common.internal.ResourceAllocator.trigger(ResourceAllocator.java:1125)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:238)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:229)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:69)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
"ExecuteThread: '21' for queue: 'default'" daemon prio=5 tid=0x14be3cb0nid=0x10e0
waiting on monitor [0x15c5f000..0x15c5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '20' for queue: 'default'" daemon prio=5 tid=0x14be30f8nid=0x620
waiting on monitor [0x15c1f000..0x15c1fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '19' for queue: 'default'" daemon prio=5 tid=0x14be2540nid=0x350
waiting on monitor [0x15bdf000..0x15bdfdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '18' for queue: 'default'" daemon prio=5 tid=0x14be1988nid=0x104c
waiting on monitor [0x15b9f000..0x15b9fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:118)
"ExecuteThread: '17' for queue: 'default'" daemon prio=5 tid=0x14c4db30nid=0xff0
waiting on monitor [0x15b5f000..0x15b5fdbc]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:420)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java:94)
at webl -
Facing problem in Weblogic Server 10.0
Hi,
I migrated one application from Weblogic 5.1 Commerce to weblogic 10. As part of this, Iam facing the below problem. In this migration, I configured all the things in new weblogic 10.0 as in weblogic 5.1.
When I deployed the application(war file), I saw the below error message in the console.
Error Message:
<Aug 14, 2007 4:58:23 PM GMT+08:00> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.internal.WebAppServletContext@10de2bd
- appName: 'evalami', name: 'evalami.war', context-path: '/evalami'] Root cause of ServletException.
java.lang.ExceptionInInitializerError at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
Truncated. see log file for complete stacktrace
java.lang.NullPointerException
at java.util.Properties$LineReader.readLine(Properties.java:365)
at java.util.Properties.load(Properties.java:293)
at com.beasys.commerce.axiom.util.helper.CommercePropertiesHelper.load(CommercePropertiesHelper.java:80)
at com.beasys.commerce.axiom.util.helper.CommercePropertiesHelper.getInstance(CommercePropertiesHelper.java:46)
at com.beasys.commerce.foundation.flow.FlowManager.<clinit>(FlowManager.java:42) Truncated. see log file for complete stacktrace
>
<Aug 14, 2007 4:58:26 PM GMT+08:00> <Error> <HTTP> <BEA-101107> <[weblogic.servlet.internal.WebAppServletContext@10de2bd
- appName: 'evalami', name: 'evalami.war', context-path: '/evalami'] Problem occurred while serving the error page.
weblogic.servlet.jsp.CompilationException: Failed to compile JSP /jsp/servererror.jsp
servererror.jsp:8:5: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or
that there were errors during parsing of the .tld file.
<%@ taglib uri="pipeline.tld" prefix="pipeline" %>
^----^
servererror.jsp:8:5: No tag library could be found with this URI. Possible causes could be that the URI is incorrect, or
that there were errors during parsing of the .tld file.
<%@ taglib uri="pipeline.tld" prefix="pipeline" %>
^----^
servererror.jsp:53:8: No variable or field with this name could be found at this location.
<%if(msgObj != null){
^----^
servererror.jsp:55:28: The qualifier of this name is a package, which cannot contain methods.
Collection col = msgObj.getErrors(); ^-------^
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(JavelinxJSPStub.java:296)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:200)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:164)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:235)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:391)
Truncated. see log file for complete stacktrace
>
Please help in this. Thanks.It's recommended to rebuild your deployment descriptors[i.e weblogic.xml, weblogic-ehb-jar.xml....etc] in upgraded relaease.
Thanks,
Qumar Hussain -
Problem starting weblogic server
Can I use third party libraries with the evaluation copy of the weblogic
server?
I am having problems starting the weblogic server with third party
libraries (i.e. oralce's sqlj's translator.zip, runtime.zip and
classes2.zip). The following exception is thrown when the server is
initialising:
Can someone explain what is wrong please?
Many thanks
Gilbert Owusu
15:17:10 GMT 2000:<I> <System Props> weblogic.system.home = C:\weblog
ic
Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Loaded License :
C:/weblogic/l
icense/WebLogicLicense.xml
Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Server loading from
weblogic.c
lass.path. EJB redeployment enabled.
java.lang.Exception: Problem with X509 certificate: fingerprint =
5ebfaa56b17289
3f050b19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after
= Sun M
ay 28 22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco
O=BEA WebLo
gic CN=weblogic.beasys.com [email protected] , issuer = C=US
SP=Califor
nia L=San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=s
[email protected] , key = modulus length=65 exponent length=3,
java.lang.Exc
eption: Certificate expired or not yet valid: fingerprint =
5ebfaa56b172893f050b
19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
May 28
22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
WebLogic CN
=weblogic.beasys.com [email protected] , issuer = C=US
SP=California L=
San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=securit
[email protected] , key = modulus length=65 exponent length=3
at
weblogic.t3.srvr.SSLListenThread.insertIntoCAChain(SSLListenThread.ja
va:206)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java,
Compile
d Code)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
Mon Jun 19 15:17:16 GMT 2000:<E> <SSLListenThread> Security
Configuration Proble
m with SSL server certificate file (C:\weblogic\myserver\democert.pem),
java.lan
g.Exception: Problem with X509 certificate: fingerprint =
5ebfaa56b172893f050b19
ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
May 28 22
:03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
WebLogic CN=w
eblogic.beasys.com [email protected] , issuer = C=US
SP=California L=Sa
n Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=security@
weblogic.com , key = modulus length=65 exponent length=3,
java.lang.Exception:
Certificate expired or not yet valid: fingerprint =
5ebfaa56b172893f050b19ae79d8
0547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun May 28
22:03:47
GMT 2000, holder = C=US SP=California L=San Francisco O=BEA WebLogic
CN=weblogi
c.beasys.com [email protected] , issuer = C=US SP=California
L=San Fran
cisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=security@weblog
ic.com , key = modulus length=65 exponent length=3
Mon Jun 19 15:17:17 GMT 2000:<I> <Security> Not listening for SSL:
java.io.IOExc
eption: Security Configuration Problem with SSL server certificate file
(C:\webl
ogic\myserver\democert.pem), java.lang.Exception: Problem with X509
certificate:
fingerprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
22:03:4
7 GMT 2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
SP=Californi
a L=San Francisco O=BEA WebLogic CN=weblogic.beasys.com
[email protected]
om , issuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
CN=Demo
Certificate Authority [email protected] , key = modulus
length=65 exp
onent length=3, java.lang.Exception: Certificate expired or not yet
valid: finge
rprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
22:03:47 GMT
2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
SP=California L=Sa
n Francisco O=BEA WebLogic CN=weblogic.beasys.com
[email protected] , i
ssuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
CN=Demo Certif
icate Authority [email protected] , key = modulus length=65
exponent
length=3
Mon Jun 19 15:17:19 GMT 2000:<I> <WebLogicServer> Invoking main-style
startup we
blogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartu
p
Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Beginning startup process
Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Init JMS Security
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Initializing from
weblogic.properties
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Startup process complete. JMS is
active
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound SessionPoolManager as
weblogic.jms.
SessionPoolManager
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound ConnectionConsumerManager
as weblog
ic.jms.ConnectionConsumerManager
Mon Jun 19 15:17:21 GMT 2000:<I> <WebLogicServer> Invoking main-style
startup RM
I Registry weblogic.rmi.internal.RegistryImpl
Mon Jun 19 15:17:21 GMT 2000:<I> <RMI> Registry started
Mon Jun 19 15:17:21 GMT 2000:<I> <EJB> Enterprise JavaBeans initializing
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.NoClassDefFoundError: sql
j/runtime/ConnectionContext
at java.lang.ClassLoader.resolveClass0(Native Method)
at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
at
weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
at
weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
pl.java:576)
at
weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
.java, Compiled Code)
at
weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
:335)
at
weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
31)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
iled Code)
at
weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
2)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at
weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoClassDefFoundError: sqlj/runtime/ConnectionContext
at java.lang.ClassLoader.resolveClass0(Native Method)
at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
at
weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
at
weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
pl.java:576)
at
weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
.java, Compiled Code)
at
weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
:335)
at
weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
31)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
iled Code)
at
weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
2)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at
weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
WebLogic Server terminated with an abnormal condition of 1
Hit return to continue...>>>>>>>>>It appears that you have two different problems:
1 -- you are using an expired certificate. You should download the
latest version of the evaluation to get a new certificate.
2 -- you should check out the documentation on using the
Weblogic.class.path. That is where you should put all of your user
classes including those that you get from Oracle.
Thanks,
Michael
G Owusu wrote:
>
Can I use third party libraries with the evaluation copy of the weblogic
server?
I am having problems starting the weblogic server with third party
libraries (i.e. oralce's sqlj's translator.zip, runtime.zip and
classes2.zip). The following exception is thrown when the server is
initialising:
Can someone explain what is wrong please?
Many thanks
Gilbert Owusu
15:17:10 GMT 2000:<I> <System Props> weblogic.system.home = C:\weblog
ic
Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Loaded License :
C:/weblogic/l
icense/WebLogicLicense.xml
Mon Jun 19 15:17:10 GMT 2000:<I> <WebLogicServer> Server loading from
weblogic.c
lass.path. EJB redeployment enabled.
java.lang.Exception: Problem with X509 certificate: fingerprint =
5ebfaa56b17289
3f050b19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after
= Sun M
ay 28 22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco
O=BEA WebLo
gic CN=weblogic.beasys.com [email protected] , issuer = C=US
SP=Califor
nia L=San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=s
[email protected] , key = modulus length=65 exponent length=3,
java.lang.Exc
eption: Certificate expired or not yet valid: fingerprint =
5ebfaa56b172893f050b
19ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
May 28
22:03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
WebLogic CN
=weblogic.beasys.com [email protected] , issuer = C=US
SP=California L=
San Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=securit
[email protected] , key = modulus length=65 exponent length=3
at
weblogic.t3.srvr.SSLListenThread.insertIntoCAChain(SSLListenThread.ja
va:206)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java,
Compile
d Code)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
Mon Jun 19 15:17:16 GMT 2000:<E> <SSLListenThread> Security
Configuration Proble
m with SSL server certificate file (C:\weblogic\myserver\democert.pem),
java.lan
g.Exception: Problem with X509 certificate: fingerprint =
5ebfaa56b172893f050b19
ae79d80547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun
May 28 22
:03:47 GMT 2000, holder = C=US SP=California L=San Francisco O=BEA
WebLogic CN=w
eblogic.beasys.com [email protected] , issuer = C=US
SP=California L=Sa
n Francisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=security@
weblogic.com , key = modulus length=65 exponent length=3,
java.lang.Exception:
Certificate expired or not yet valid: fingerprint =
5ebfaa56b172893f050b19ae79d8
0547, not before = Fri Apr 28 22:03:47 GMT 2000, not after = Sun May 28
22:03:47
GMT 2000, holder = C=US SP=California L=San Francisco O=BEA WebLogic
CN=weblogi
c.beasys.com [email protected] , issuer = C=US SP=California
L=San Fran
cisco O=WebLogic OU=Security CN=Demo Certificate Authority
Email=security@weblog
ic.com , key = modulus length=65 exponent length=3
Mon Jun 19 15:17:17 GMT 2000:<I> <Security> Not listening for SSL:
java.io.IOExc
eption: Security Configuration Problem with SSL server certificate file
(C:\webl
ogic\myserver\democert.pem), java.lang.Exception: Problem with X509
certificate:
fingerprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
22:03:4
7 GMT 2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
SP=Californi
a L=San Francisco O=BEA WebLogic CN=weblogic.beasys.com
[email protected]
om , issuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
CN=Demo
Certificate Authority [email protected] , key = modulus
length=65 exp
onent length=3, java.lang.Exception: Certificate expired or not yet
valid: finge
rprint = 5ebfaa56b172893f050b19ae79d80547, not before = Fri Apr 28
22:03:47 GMT
2000, not after = Sun May 28 22:03:47 GMT 2000, holder = C=US
SP=California L=Sa
n Francisco O=BEA WebLogic CN=weblogic.beasys.com
[email protected] , i
ssuer = C=US SP=California L=San Francisco O=WebLogic OU=Security
CN=Demo Certif
icate Authority [email protected] , key = modulus length=65
exponent
length=3
Mon Jun 19 15:17:19 GMT 2000:<I> <WebLogicServer> Invoking main-style
startup we
blogic.jdbc.common.internal.JdbcStartup
weblogic.jdbc.common.internal.JdbcStartu
p
Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Beginning startup process
Mon Jun 19 15:17:19 GMT 2000:<I> <JMS> Init JMS Security
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Initializing from
weblogic.properties
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Startup process complete. JMS is
active
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound SessionPoolManager as
weblogic.jms.
SessionPoolManager
Mon Jun 19 15:17:20 GMT 2000:<I> <JMS> Bound ConnectionConsumerManager
as weblog
ic.jms.ConnectionConsumerManager
Mon Jun 19 15:17:21 GMT 2000:<I> <WebLogicServer> Invoking main-style
startup RM
I Registry weblogic.rmi.internal.RegistryImpl
Mon Jun 19 15:17:21 GMT 2000:<I> <RMI> Registry started
Mon Jun 19 15:17:21 GMT 2000:<I> <EJB> Enterprise JavaBeans initializing
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.NoClassDefFoundError: sql
j/runtime/ConnectionContext
at java.lang.ClassLoader.resolveClass0(Native Method)
at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
at
weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
at
weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
pl.java:576)
at
weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
.java, Compiled Code)
at
weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
:335)
at
weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
31)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
iled Code)
at
weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
2)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at
weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
java.lang.NoClassDefFoundError: sqlj/runtime/ConnectionContext
at java.lang.ClassLoader.resolveClass0(Native Method)
at java.lang.ClassLoader.resolveClass(ClassLoader.java:545)
at
weblogic.utils.classloaders.GenericClassLoader.reallyLoadClass(Generi
cClassLoader.java, Compiled Code)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:172)
at
weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClass
Loader.java:146)
at
weblogic.ejb.internal.EJBJarLoader.loadClass(EJBJarLoader.java:95)
at
weblogic.ejb.internal.EJBHomeImpl.loadClass(EJBHomeImpl.java:617)
at weblogic.ejb.internal.EJBHomeImpl.setup(EJBHomeImpl.java:533)
at
weblogic.ejb.internal.EJBDeploymentImpl.setupBeanHome(EJBDeploymentIm
pl.java:576)
at
weblogic.ejb.internal.EJBDeploymentImpl.deployBeans(EJBDeploymentImpl
.java, Compiled Code)
at
weblogic.ejb.internal.EJBDeploymentImpl.deploy(EJBDeploymentImpl.java
:335)
at
weblogic.ejb.internal.EJBJarDeployment.deploy(EJBJarDeployment.java:2
31)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java, Comp
iled Code)
at
weblogic.ejb.internal.EJBManagerImpl.deployNew(EJBManagerImpl.java:35
2)
at
weblogic.ejb.internal.EJBManagerImpl.deploy(EJBManagerImpl.java:319)
at
weblogic.ejb.internal.EJBManagerImpl.deployBeans(EJBManagerImpl.java,
Compiled Code)
at
weblogic.ejb.internal.EJBManagerImpl.<init>(EJBManagerImpl.java:242)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:825)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
at weblogic.NTServiceHelper.run(NTServiceHelper.java:19)
at java.lang.Thread.run(Thread.java:479)
WebLogic Server terminated with an abnormal condition of 1
Hit return to continue...>>>>>>>>> -
PVM Installation Problem (install report server)
Hi,
i am trying to install PVM 1.0.2 , but i have the following error:
Installing Report Server:
ERROR: Failed to install report server as user pvmadm. Please check OS
user configuration then try again.
I add pvmadm to root group,except dba group, but i have the same problem.
Any ideas ?
TIAHello,
The installation of a Reports Server as a "Windows Service" is no more possible in Oracle Reports 10g R2 :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_strt.htm#i1005629
Start the reports server with the command :
rwsrver server=<server_name> batch=yes
or use opmn to manage the reports server .
Regards -
Problem restarting WebLogic Server 10.3
Sorry for double posting. May be due to the length of the post, content wasn't getting posted in my previous posts.
I am having a problem restarting my Oracle WebLogic Server 10.3.
If I try to restart or republish my server, it gives me the error 'weblogic.management.ManagementException: Unable to obtain lock on D:\user_projects\userdomain\servers\AdminServer\tmp\AdminServer.lok. Server may already be running'.
This problem happens only when the server is inactive for a while. Say, if I leave the server running overnight without any activity, the server state reads stopped in the morning, even though background java processes are still running. Now, at this point, it doesn't let me restart or republish my server until I explicitly kill all the java process from windows task manager.
Any help to solve this highly frustrating problem is gratefully appreciated. BTW, this happens on development systems, running on windows, using Oracle Workshop for WebLogic v10.3.
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on D:\user_projects\userdomain\servers\AdminServer\tmp\AdminServer.lok. Server may already be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:58)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:73)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:459)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:164)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
at weblogic.Server.main(Server.java:67)
>
<May 11, 2009 9:16:50 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<May 11, 2009 9:16:50 AM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<May 11, 2009 9:16:50 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
Thanks. -
Urgent:Problem With Weblogic Server 8.1
Hi,
I am facing problem while starting weblogic server.I copied latest code & domain folder from one machine to run an application on my local machine.I opened .work file in weblogic asked me to define server for an application .I browse .xml file which was I copied from domain.
After that when I start weblogic server ,the message appeared that Weblogic Server is not on ur local machine& can not be started.
To overcome this I opened respective .cmd file text mode & changed path to localhost.But,still facing problem.
Plz,help.
Vaish...Hi,
Ya,I have changed my config.xml to Localhost setting.I even Changed in my SetDomainEnv.cmd ,startWeblogic.cmd & stopWeblogic.cmd files according to my localhost setting.But , not succeed.
Vaish...
Maybe you are looking for
-
Mobile wifi mouse back and forward functions don't work
I just bought the hp wifi mobile mouse model MOWFFKUL and back and forward functions don't work and it's driving me crazy. I bought it for these specific functions. At first I thought that it was a broken mouse. So I went and returned it, got back ho
-
JavaWebStart : How to check intalled JRE ?
Hi I poster some days ago a message on the JavaWebStart forum, but I haven't (yet) received any reply. So, I'm doing it here... maybe.... here it is hi, Can anyone tell me how can I check what version of java web start is installed on the client and
-
Itunes error code 1007 Audible
itunes error code 1007 everytime I try to authourise my audible account. tried new itunes install. even new windows 7 and itunes reinstall? Please help!
-
Upgrading from LiveMotion...
Some of you may remember a cracking piece of software the nice people at Adobe created in the late 90s called LiveMotion. I have been using LiveMotion for 10 years quite happily, but I have reached the limitations of the software now and need to upgr
-
Airport network connection comes and goes
I have a belkin N router and an iMac with an original airport card. For the past couple of months the airport will intermittently pretend the network doesn't exist. The router is 30 ft away so the connection is near 100% when it sees the network. Whe