SP23 Impact on Seeburger Message Splitter

HI All,
We have recently upgraded to SP23 patch , after that seeburger message splitter is not able to identify the spliiter configuration .
I am getting messge as
11.06.2009 07:24:01 Error SEEBURGER/MSGSPLITTER: No configuration found for
Has anybody faced this type of error.
Regards
Venkatesh

Hey
Please open an OSS message for this.
Thanks
Aamir

Similar Messages

Problem with Seeburger Message splitter

I'm doing a Inbound 850 from VAN...but for now I have a sample file which has 2 orders in it and this is the error I get:
Information Channel fromFile: Send binary file "/usr/sap/KPX/COMM/EDI/out_split/850_E2X_1.dat", size 2918 with QoS EO.
Information MP: entering1
Information MP: processing local module localejbs/CallBicXIRaBean
Information SEEBURGER BICXIADAPTER.MODULE Message entered Module (CallBicXIRaBean) and will be passed to the adapter now.
Information SEEBURGER BICXIADAPTER +++ starting conversion with mapping: See_E2X_ANSIX12_850_V4010 +++
Information SEEBURGER BICXIADAPTER +++ CONVERSION SUCCESSFUL +++
Information SEEBURGER BICXIADAPTER.MODULE BIC Module (CallBicXIRaBean) is exiting succesfully.
Information MP: processing local module localejbs/Seeburger/MessageSplitter
Warning SEEBURGER/MSGSPLITTER: There is no attachment to split. So there is nothing to do.
Information SEEBURGER/MSGSPLITTER: Finished splitting!
I have the set the parameterName "split" to true...
Any idea why its not splitting?
Thanks,
Srini
Edited by: Srinivas Davuluri on May 13, 2009 10:10 AM

Hi,
Seeburger responded and added a patch, but now I'm getting this error:
Information Channel fromFile: Send binary file "/usr/sap/KPX/COMM/EDI/out_split/850_E2X_1.dat", size 2918 with QoS EO.
Information MP: entering1
Information MP: processing local module localejbs/CallBicXIRaBean
Information SEEBURGER BICXIADAPTER.MODULE Message entered Module (CallBicXIRaBean) and will be passed to the adapter now.
Information SEEBURGER BICXIADAPTER +++ starting conversion with mapping: See_E2X_ANSIX12_850_V4010 +++
Information SEEBURGER BICXIADAPTER +++ CONVERSION SUCCESSFUL +++
Information SEEBURGER BICXIADAPTER.MODULE BIC Module (CallBicXIRaBean) is exiting succesfully.
Information MP: processing local module localejbs/Seeburger/MessageSplitter
Information SEEBURGER/MESSAGESPLITTER: Trying to establish CCI Connection to Message Splitter Adapter
Information SEEBURGER/MESSAGESPLITTER: Creating CCI Interaction
Warning SEEBURGER/MESSAGESPLITTER: There is no attachment to split. So there is nothing to do.
Information SEEBURGER/MESSAGESPLITTER: Finished splitting!
Information SEEBURGER/MESSAGESPLITTER: Message Splitter Module (CallMessageSplitterXIRaBean) is exiting succesfully.
Information MP: processing local module localejbs/CallSapAdapter
Information The application tries to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
Information Trying to put the message into the send queue.
Information Message successfully put into the queue.
Information The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
Information MP: leaving
Information File "/usr/sap/KPX/COMM/EDI/out_split/850_E2X_1.dat" deleted after processing.
Any suggestions??
Thanks,
Srini
Edited by: Srinivas Davuluri on May 14, 2009 11:32 AM
Edited by: Srinivas Davuluri on May 15, 2009 10:00 AM

SeeBurger Message Splitter State accepted or partially accepted

Hi,
The requirement is that if we receive an EDI interchange with multiple transaction sets and if some of them are rejected due to EDI data errors, only those transaction sets in error should be ignored for processing and the ones without errors should successfully come to the integration engine. I suppose this can be achieved by having all our inbound Seeburger splitter configurations in u201CPartially acceptedu201D status.
currently we have set our configurations in accepted state.
Could you please confirm if we change state to partially accepted it wil solve our purpose?
Best Regards,
Harleen Kaur Chadha

Hi.
Create both partial and partial accepted.

EDI Seeburger Message Spliter

Hi,
I am testing a EDI ANSI X12 850 Vxxxx using SEEBURGER adapter in SAP PI. It is a simple file to IDOC scenario. I have configured all the ID objects (includng the Split 997 channel). But when i try to configure the Message Splitter in Seeburger workbench, i am not able to access the service and Channel. The buttons are not active. Do i need to do any other setup before trying to do this ?

Hi,
After entering the party and services need to click on the search button of the services to display the channel names...
and similarly for the other objects...(buttons will get activated after clicking on the search...)
HTH
Rajesh

Error in Seeburger Message Monitoring

Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha

How to populate the Sender and Receiver GLN/ID in the Seeburger Message Tracking

HI Team,
Scenario :
ECC--> PI--> Party
Sending GS1 XML Message to party (Not EDI). Sender Party and Receiver Party appearing as expected.
BUT User expecting to see the Sender GLN and Receiver GLN in Seeburger Message Tracking.
It should be dynamically picked form GS1 Message. Should Appear in RED BOXES Shown below.What Module Parameters Should be used for this.
I have Tried destTargetMsg and destSourceMsg. But did'nt work.
can anyone please Help

Hi Veman
You are correct. For XML to XML, you do not need BIC module.
However, since you are not using BIC module, you will not be able to enrich the metadata using the archiveXI parameter during processing at the adapter framework.
Another place to enrich the metadata would be during message mapping. You can call a custom UDF to populate the metadata and create an entry in Seeburger Message Tracking.
Please refer to the Seeburger manual for Message Tracking Function for more details on how to create the UDF.
Rgds
Eng Swee

Seeburger Message Tracking

Hi,
Can anyone please tell us how to use seeburger message tracking.
I understand that there are 3 steps to be done.
1. Mapping in IR should have a UDF which referrers to the standard Seeburger function jar files.
2. Module configuration in the channel with FileStore module.
3. Configuration in Message Tracking.
But need some details about each step.
Could anyone please provide a document which explains this configuration.
Thanks in advance
Jagruthi

Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh

Seeburger message mapping

Guys,
I have to map A_850_V4010 to IDOC ORDERS05. I was trying to leverage the the message mapping Seeburger delivers as part of
the B2BContent-A_850_V4010_to_I_ORDERS_05
This is what I did ,
a) I have imported the ORDERS05 idoc definition fromECC system into my name space.
b) I also imported the 850_v4010 from Seeburger Message catalogue by importing XML_850_V4010.xsd.
Now, when I try to copy the A_850_V4010_to_I_ORDERS_05 that into my namepsace, the XI asks whether I want to import the Source Message LIST from http://seeburger.com/b2b as well as ORDERS05 from http://seeburger.com/b2b .
My questions are
1)How is the external defintion done ? Is it like step a) and b) described above? or, does Seeburger provide the XSD for ORDERS05 idoc?
2) how do I make sure that ORDERS05 that I got from my ECC system is the same structure as that of ORDERS05 in
Seeburger? besides going through individual fields . Ideally, I would like to use the ORDERS05 I imported in step a) as the traget message. With message maaping copy it seems step a) and b) is not relevant.
3) I also need to map SHPMNT05 idoc to A_856_V4010. Since Seeburger doesn't have it in the mapping list ( the one they have is DELVRY03_To_A_856_V4010) , the mapping will be the same as the DELVRY03_To_A_856_V4010 EXCEPT that I need to get
TKNUM from the SHPMNT05 header. I am wondering whether Manually creating the mapping is the only way, or is there anyway I can leverage the DELVRY03_To_A_856_V4010 mapping? Has anyone had the experience where they had to change the source Idoc but, still been able to leverage the existing mapping . I just need to change the mapping from E1EDL20 - VBELNin Delvry03 to E1EDT20-TKNUM in SHPMNT05 idoc - this will be mapped to D_396 in S_BSN segment.
Thanks !!

Hey
>>1)How is the external defintion done ? Is it like step a) and b) described above? or, does Seeburger provide the XSD for ORDERS05 idoc?
Seeburger provides XSD's for all the major EDI structures,but somehow when i was trying to import the XSD'd and Message mapping into my own SWCV,i was getting the same issue as you have so i ended up copying them manually.it works fine after that.
>>I am wondering whether Manually creating the mapping is the only way, or is there anyway
DELVRY03 IDOC is different from SHPMT05 IDOC,even i had to use SHPMNT05 IDOC message mapping and since it didn't come with seeburger,i designed my own message mapping manually.
>>experience where they had to change the source Idoc but, still been able to leverage the existing mapping
I tried this,it doesn't works properly,gives you issues at the time of activating the mapping.
My advice would be to go ahead and do all the steps manually,i had put in lots of effort and time but ended up doing major parts of mappings manually,the mapping you get from SeeBurger is just the base/generic mapping and is a lot different from the actual mapping required for Business partners.
Thanx
Aamir
Edited by: Aamir Suhail on May 6, 2008 8:33 PM

Seeburger message tracking archiving / deleting question

Hello,
We are using Seeburger 1.7 with XI 7.0 for our EDI translations..We store information in Seeburger Message Tracking for our business requirements.I would like to know how these entries could be archived(Compressed) and stored or deleted after certain days so that we wont max up our storage..?
Any suggestions are appreciated.
Thanks in advance!
Larry

Prateek,
Thanks for your response.Yes,I could find the "Archive Configuration" option..when I click that it shows me a screen saying show master data with two items with check boxes (Document Types & Archiving Systems)..On clicking the details of them I see set of parameters which shows the profile and the document type..not sure how to proceed from here to set up any archiving / deletion..any help is appreciated..
Regards,
Larry.

Resend Message from Seeburger message monitoring

Hi friends,
I want to know that is there any possiblity of resending the message from Seeburger message monitoring tool.
One of the messages failed due to a problem in sender ID.
I want to resend this message. is it possible ?
Note: Message send out successfully from communcation channel to AS2 adapter.
Thanks
Sunil.

Hi Sunil,
Please let me know what error you can see in Seeburger Workbench.
In My view you can see the below type of error with State u201CError on send, will be retriedu201D
If Any Message failed in AS2 Adapter may be due to any reason
1. Wrong Sender/ Receiver ID
2. Wrong URL
3. Firewall rules are not in place
4. Partner Production site is down and you are unable to connect to him
Messages with above errors will appear with Success Flag in SXMB_MONI. But they will be caught by Seeburger Adapter and will be in the Error Status in SEEBURGER WORK BENCH
The only way to find/restart those messages is go to Runtime Work Bench Messages Monitoring --> Messages form Component (Adapter Engine) ---> System Error Status.
Any Message which failed in Seeburger Level can be seen only in Runtime Workbench.
Regards,
Rama.

Clean Seeburger Message Monitor

Hi all,
I have a lot of old message in Seeburger Message monitor. For instance many "Error on send, will be retried" that have been there since 2012. Can I clean this log?

Hi,
Seeburger Workbench is an additional layer to monitor message transmission using AS2.
This can be accessed at:
http://server:port/seeburger/index.html
Scenario: From partner ->XI->R/3
In this case,message has to be checked at these levels:
Seeburger Monitor->RWB Message Monitor->SXI_MONITOR->R/3
Scenario: R/3 ->XI->To partner
In this case,message has to be checked at these levels:
R/3 -> SXI_MONITOR -> RWB Message Monitor -> Seeburger Monitor
Hence,in order to have a successful message transmission,a message has to be successful at all these levels.
Kindly let me know if this is fine.
Thanks.
Regards,
Shweta

Multi mapping & seeburger Message Tracking (Filestore module)

Hello,
For the people who knows seeburger archiving...
Anybody make the scenario using multi mapping (split in the receiver) with message Tracking seeburger (File Store module in the Receiver Channel)?

Hi,
before these steps you need to have MT installer file based on your database and some settings needs to be done at database level.
if you have seeburger manuals there is one pdf 'SAPXI_Archiving_en.pdf' which talks about MT.
Suresh

Issue with IDOC occurence and SeeBurger message mapping

Hey Guys
While developing a EDI 850 to IDOC scenario i came across this issue with pre-delivered Seeburger mapping(A_850_V4010_to_I_ORDERS05).
I actually need to post multiple IDOC's to SAP system in the same message so i changed the IDOC occurence to unbounded and re-imported that as a .XSD file in Integration repository.
Earlier the pre-delivered message mappings provided by SeeBurger(under SEEBURGER_HIGH-TECH, 1.7.1 of seeburger) was working fine for me since i was posting only 1 IDOC but now the mapping is failing as the IDOC occurence has changed(unbounded).
Is there a way we can do some settings on SeeBurger server or Bic so that we can use the pre-delivered mapping for Multiple IDOC's as well?
I just want to make sure before i start off with doing whole of the mapping manually.
Thanx
Aamir

Thanx for the input guys
@Deepthi.
Doing whole of mapping manualy is definitely the last option but i m looking for ways to re-use the pre-delivered SeeBurger mapping.
>>Seeburger Mapping is only just to convert XML to EDI and EDI to XML.
Bic mapping designer does this,i m dealing with message mapping of XI(convert source to target) not Bic designer right now,and Bic does more than just XML to EDI and vice versa,it handles other industry standards too.
@Jens
>>The XI message mappings from Seeburger in the Industry solutions are mapping templates
Yeah,but the mapping template i have deals with 850 to ORDERS05,when i change IDOC occurence and re-import it back in Integration repository,it doesn't stays as ORDERS05,it has to be changed to user defined message interface(in my case MI_ORDERS05) so i m unable to use 850 to ORDERS05 template.
@Seshagiri
>>Open the Seeburger SWCV From the IR--goto External Def---Select the right one and copy it and paste it in notepad.
Changing the occurence is not an issue,i want to re-use the pre-delivered mapping in Integration repository,which is not working.
Looks like i need to do it manually
Thanx
Aamir

Seeburger Message Catalogue - Need more messages

Hi experts,
very quick and simple question. The standard catalogue given with Seeburger MD/BIC doesn't have some of the messages I need e.g. INVOIC (D01B) and a few others.
What is the best and quickest way to achieve this?
I doubt if there are any financial charges for this?
regards

Hi Daniel,
Thank you for the reply. I am hoping there shouldn't be any charge for it
As the structures are quite easily available on the net e.g. the controlling body site however would require minor changes as per seeburger.
What I am finding hard is there is no documentation I can find on mapping designer except the one pdf which came with it but that doesn't give me much except how to a mapping.
I need to more validations in even for other scenario's e.g. check the CNT segment but don't know to edit these things in mapping designer. Any resource you have?
regards

Seeburger Message Tracking Update

Hi All,
I m working on one IDOC to Bank (820 document ) scenario. I am using the File adapter at receiver side and dumping a XML file.
I am trying to Update the message tracking in the seeburger using a function in message mapping which basically uses a UDF which includes use of MTMasterXI.
Any pointers on how to update the message trace in Seeburger Workbench will be appreciated.
Regards..
Sachin Dhingra

What do you mean by "update the message trace"?
You can see the message in Message Tracking tab of Workbench. But before that a bit more settings are required.
- Mapping in IR like you did it by creating UDF. It should refer to the standard Seeburger function jar files.
- Module configuration in the channel with FileStore module.
- Configuration in Message Tracking.
I hope the Message Tracking is already working for you when you click on Message Tracking tab.
Regards,
Prateek

SP23 Impact on Seeburger Message Splitter

Similar Messages

Maybe you are looking for