SP3 Almost completes installation but freezes at the Finishing stage showing "Running processes after install"
I have an HP Pavilion zd7000 laptop with Windows XP & SP2 update installed. Processor is Intel Pentium 4. My system is clean with no rubbish software running. I have several anti-malware & anti-spyware systems installed but they are dormant & not running during the attempted installation. SP3 almost completes installation but freezes at "Finishing" stage showing "Running processes after install". Anti-virus is of course switched off. The system then hangs fore-ever with hard disc activity showing intermittently but nothing else happening. Luckily, by holding down the laptop on/off switch I can always eventually restore to previous settings & recover full use but without SP3! This is annoying & frustrating. I have seen a lot of threads about this problem but no real answers. Can anyone help please?
What is Shmrate.exe is not running?
This can be read two different ways
One well if you look at it like this
User>shmgrate>Operating system>drivers>computer. Result is denied!
If you have something like this
User > User Account Control >Operating system>drivers>computer. Result is denied again!
Note that an adminstrator is only a adminstrator and Computer Adminstrator can install Sp(s). Which I believe is tyour question. Which is my guess.
Which is the reason some people reccommend installing from the "Adminstrator" account Which generally is not a User account. Yes some people add and modify there account access by using Subinacl.exe and reset.cmd, which bumps the account from adminstrator to Computer Adminstrator. An alternative is to boot into safe mode. Pressing the *F8* key before the windows welcome screen starts up. And selecting safe mode. Which is why more people report success with using the .ISO install.
To add to your confusion. Windows Sp2 usually has windows installer 3.0, or windows installer 3.1
Table us types of accounts. I wish windows 200 documentation had made it completely into Xps documentation. They had an excellent table with tthe types of accounts
Limited user. Not able to run more then basic programs. Not able to ;install device drivers, not able to install progras, not able to install Sp(s)s
Power user Able to run more advanced programs. IE Defragger.
adminstrator. Mess with the operating system, back up things, able to install programs, add users.When Windows Xp is installed this is the type of user associated with adminstrator. NOT CA
Computer adminstrator. Able to Install of all things Sp(s).
Hopefully this helps you out. Of course there is the release notes, Xp solution center and of course things to do before installing Sp3.
Keith
Similar Messages
-
The Groupwise WebAccess can be recognize after install
HI All,
After install the groupwise webaccess, I try to configure webaccess, this error shows
"GroupWise WebAccess is not installed. Please install it and run GroupWise WebAccess Configuration again"
I enable proxy module already.
Could you tell me how to debug this case?
Regards,
NdhuynhOriginally Posted by ndhuynh
Thank you for your reply, dzanre!
Linux, SLES 11 SP3 with minimum installation.
I tried 3 times with another server.
After install Webaccess, I checked in the apache configuration and there is nothing related to webaccess like what i saw in groupwise 2012.
Updated: I have just installed webaccess 2014 successfull in the upgraded system(from 2012 to 2014) .
So I think the webaccess needs more requirement than ibm java 6 and apache2 & tomcat6. -
Every time I download the itunes installation file, it get deleted because it has got a virus... I've turned Norton 360 completely off, but still get the same error???
Hello wilsona1234,
Sorry for the trouble. What is the exact detection from Norton for the installation file? Did you download itunes from the legitimate Apple web site? What is the error you are referring to?
Thanks,
Harry
Norton Support -
I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.
Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea. -
My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
I have tried re-installation but still have the same problem.
Could you please forward a solution to this problem.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
in imovie11 the finished film shows up in the events library but the project file is missing. A complete search of hard drive fails to find it. Any way to reconstruct the project file from the finished film? I need to re-edit the movie.
Thanks for the info. I do have the Aperture 2 disc so I'll re-install and repair library then give it a go again. It will probably take a few days as I have a HUGE library. I'll let you know the outcome when it completes! Thanks again for the help.
Mark -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
The location for my music folders in itunes is showing correctly (E:\itunes\iTunes Media) but none of the songs are showing in my itunes library. Would be extremely grateful for any suggestions
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps youshouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2
For out of sync issues, which most likely are due to time changes or NTP sync issues, you must correct the system time and perform a manual sync up through the UI.
For certificate expiry issues, you must install a valid certificate and perform a manual sync up through the UI.
For a node that has been down for more than six hours, you must restart the node, check for connectivity issues, and perform a manual sync up through the UI. -
need help .. 4g usb modem .. application installed but cannot detect the usb modem .. mobily network interface installed but cannot detect the unit
When you contacted the modem manufaturer what did they have to say?
-
I begin to download but I get the error message :|"Application Manager failed to install"
I begin to download but I get the error message :|"Application Manager failed to install"
Hi Gerald,
Welcome to the Community!
Please go through this thread http://forums.adobe.com/message/5428322, it has the initial step and then other steps if that doesn't resolve.
Thanks!
Ankit -
FF shows on the task bar shows running on task manager but I can not maximize it
FF shows on the task bar shows running on task manager but I can not maximize it.
Can you try starting Firefox in Safe Mode. To do that, hold down SHIFT while you click the desktop shortcut or quick launch icon. Then click the '''Continue without making changes''' button.
If it works in that configuration, then one of your add-ons is the culprit. -
ITunes falls over on the third stage of running iMatch
iTunes falls over on the third stage of running iMatch. Comes up with iTunes has stopped working look for fixes - which if you do says there is a fix but actually seems to do nothing just reloads 10.5.2.11 -which is what I am running. Any ideas?
you can check a similar thread involving a scrolling
movieclip:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=15&catid=665&threadid =1324923&enterthread=y -
Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(Hi:
You probably need to install the wireless card driver. -
Itunes attemots to download a movie, it says it is processing, but it does not finish, it is now "processing" for days, what can I do to stop it?
Download movie with iTune (computer) and sync to iPad.
Maybe you are looking for
-
Remove footer from specified page range
I am modifying a pdf with a sequence of footers (A, B, C, D...) that mark subsections in the text. I removed all pages in subsection B, and would now like to update the following footers to reflect the change (make C the new B, D the new C, and so fo
-
iPhoto 11 + MobileMe Gallery. All the iPhoto Albums are shared (synced) with Me Gallery. I'd like to know what is the best way to have all the changes synced. For example, when I make changes in an album (add or delete photos) I' d like to have the c
-
How do I insert a .pages file into an openoffice document
How do I insert a Pages .pdf file into an openoffice writer document?
-
Objheap.cp​p
I have a VI that was generated in Labview 5 under WFWG 3.11. I cannot open it in windows 98; some of the sub VI's open but the main program gives the following error: Failure: "objheap.cpp", line 480. Any clues. I'm currently using version 6.1. Thank
-
Numbers '09 Slows down to a halt
Numbers '09 slows down to a halt when I add error bars to a graph. If the data series has ~60 points forget it - the thing halts. I soo want to use Numbers '09, but for now I have to use either OpenOffice or Excel - both which handle this with ease.