SP3 and Fix Pack 3.1 errors.

Hello,
I am using Xcelsius 2008 and I am having 2 problems here.
1st problem, I have tried to install the Service Pack 3.
After I install it, whenever I add a new Data Connection, the right screen (where it was supposed to be the data connection seetings) I got a blank screen which does not allow me to setup any data connection.
2nd problem, after I got this bug, I have tried to install the Fix Pack 3.1. And then comes the new problem, I got an error during the files extraction:
"CRC failed in package\XcelsiusPresent.msp
the file "???" header is corrupt"
Can anybody help me with these issues?
Regards,
Fabio

I have experienced exactly same issue - This issue is with Xcelsius Present but not with Xcelsius Enterprise. So I have uninstalled Xcelsius Present and have installed Xcelsius Enterprise SP3 and Fixpack 3.1

Similar Messages

How can I confirm that I installed BO XI R2 SP3 and Fix Pack 3.5 correctly?

I installed both SP3 (Client Install) and Fix Pack 3.5 (Client Install) on my workstation. The Installation guide says it should appear in Add/Remove Programs, but I'm not seeing either entry. A log file was created for each install, is there anything within the logs that may say that the install was successful?

Under the Add/Remove programs section in the Control Panel. Select the Business Objects Application and there is a link that reads "Click here for support information"
The opened display box will display a Version such as 11.5.xxxxxx
Reply back w/ the version. SP# and 3.5 fix pack will be something like 11.5.9.1176

2008 Engage Server Service packs and Fix Packs

I have Engage Server. I tried to load SP 3 and it didn't let me open old files. SAP told me SP3 was not compatible with Server product. I had to roll back to base version 5.0.0.99 build 12,0,0,121. Does anybody know if I can at least load SP1 or SP2 (and/or Fix packs) so I can have some of the basic features?

Your first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues.

Service Packs and Fix Packs for Business Objects XI Release 2

Hi,
How can I know wich services pack or fix packs are installed on my server? I have installed Business Objects XI Release 2, and Xcelsius 2008 Release 2, and Live Office.
Do you know where can I download a spreedsheet that contains informatiion about the fix packs or service packs and the issues that solved??
Thanks
Lilia

Your first question was answered many time int his forums, please use search functionality before posting a question.
There is no publicly available Version matrix + fixed issues list.
However, you can do to Service Market Place > Downloads locate XIR2 section and see how many Service Packs and Fix Packs are available.
Latest Service Pack for XIR2 is 6
latest Fix Pack for XIR2 is FP6.4 (needs to be installed on top of SP6)
To the right of each SP/FP in the download section of SMP is a link called "Info" , it leads to Knowledge articles which contain list of fixed issues.
As all SP/FP's are cumulative, you can view Sp6 readme and Fp6.4readme to get overall picture of fixed issues.

CR 2008 and BOE XI 3.1 patches and fix pack?

I'm installing Crystal Reports 2008 and BOE XI 3.1 on windows 2008 server, can anybody tell me which service pack and fix I need to install for each product? When I looked under both product, there are so many of them. Any help is appreciated.
Regards,
Susan Johnson

I have done much testing over the past several months with BOE 3.1 and different patches. I've yet to find a combination that would allow us to be on a relatively recent patch level but that does not have a significant issue that support cannot resolve. We started with 3.1 and FixPack 1.8. This has actually been the most stable so far. We were planning to convert our production environment from XI r2 to 3.1 in August and thought it would be better to be on a more current patch level so we added SP2 and FixPack 2.6 on the advice of support. Just before beginning yet another round of testing for these additional patches, SP3 was released so we added that too. We then found a significant issue with scheduling Crystal reports that had both dynamic and static parameters. You can't enter the prompts because they don't display the correct LOV. Support advised that this issue was fixed with FixPack 2.7 so we installed it. It does indeed resolve the Crystal schedule issue but the issue returns if you install SP3. SP3 only includes up to FixPack 2.5 and whatever code was fixed in FixPack 2.7 was not rolled into SP3 so I would caution you against using that combination if you have Crystal reports with mixed parameter types and want to schedule them. We then removed SP3 and have most recently tried SP2 with FixPack 2.7. In this version, you cannot schedule Webi reports when going through one of the dashboard analytics (vs. the standard folder navigation). You get a 404 error when you try to populate the prompts. We have about 2,000 users that rely on a dashboard for navigation so needless to say, we can't go live with this issue. I would love to know what the best patch level is for 3.1 but I wouldn't recommend SP2 or SP3.

Windows XP SP3 and Dreamweaver 8.0.2 - "Error"

Windows XP SP3 and Dreamweaver 8.0.2
I am recently receiving this error message whenever I open a file -
"The following translators were not loaded due to errors:
ColdFusion.htm: has configuration information that is invalid.
JSP.htm: has configuration information that is invalid."
Really big problem;
I have lost ALL my disc so I can not do a clean install of anything!
Any help would be greatly appreciated.

Try clearing your program cache...
http://forums.adobe.com/thread/494811
If that doesn't help, try restoring the preferences...
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If you still have the activation number, you can try reinstalling a clean version available here (make sure you are logged into Adobe):
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

What are the cause and fix for the following error message? NS_ERROR_FILE_ACCESS_DENIED failure code: 0x80520015

Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined

Every time I close my Firefox browser I receive the following error message (see details below).
FYI:
-- I am running the current version of Firefox.
-- I had no problems with this error message until my computer was recently attacked by 2 viruses:
` SystemFix
` Win7 Antivirus 2012
Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
Here are my questions:
* What are the cause and fix for this problem?
* Do I need to uninstall and reinstall Firefox?
* Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
I look forward to any feedback and support you might be able to provide.
Thanks,
Metta
Error Message
NS_ERROR_FILE_ACCESS_DENIED
Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
[nsIFileOutputStream.init]
File: undefined
Line: 857
Stack: undefined

Crystal Report Service Pack and Fix Pack

Dear coleagues,
I have crystal reports with sp3 client, i would like to know if i have install fix pack 3.1 until 3.5 ??
Thanks in advance.
Fabrício

Hi Fabrício,
You can apply just FP 3.5, all previous Fix Packs are inclusive.
Thank you
Don

Crystal Reports Service Pack and Fix Pack documentation

I've been maintaining a wiki that documents fixed issues, specifically targeted at the .NET developer. The link to that wiki:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=163843498
For now, I'll keep maintaining the wiki, but if it is a duplication of effort and not used, I'll take it down.
Ludek

Umm......thanks for the feedback Ludek. You've obviously taken the time to read the documentation.
My question:
Why doesn't the "CR2008 FixPack 2.8 Fixed Issues" document list any issues fixed in FP2.8. The last I heard Jason was asking about this.........
Also where is the documentation for Fix Pack 2.9?
Thanks,
Peter.

CR2008 service pack and fix pack sequence

I have CR2008 SP0 as a component of Crystal Reports 2008 Visual Advantage. I gather that the CR component of Visual Advantage is the plain vanilla version of CR2008. There seems to be multiple SP's, and hot fixes, available for the different flavors of CR2008. Does anyone know what sequence should I follow for bringing the plain old vanilla flavored version of CR2008 up to date? Thanks....d

Yeah, I have a strange state at the client I'm at where some of the developers are using SP1 and some are using SP0, but no one has the SP1 files so we can update. The sooner I can upgrade everyone the better...any word on when the updated SP1 will be ready?
[Edit] - Got your update above that was posted while I was writing my e-mail...If I had just waited a few more seconds...
Dan
Edited by: Dan Begallie on Apr 20, 2009 8:24 PM

BO XI R 3.1 SP 2 fix pack 2.1 - Database error occured - "Error on fetch"

Hi Ingo,
As per SAP recommendation we have upgraded our SAP BI system from BI 7.0 to BI 7.01 (Enhancement Pack 1).
And BO XI R 3.1 SP 2 to BO XI R 3.1 SP 2 fix pack 2.1.
After applying fix pack 2.1 on BO server, suddenly the reports on one of the Universes throwing error as follows:
A database error occured. The database error text is : (CS) "Error on Fetch". (WS 10901).
We have to apply Enhancement pack (SAP BI 7.01) and fix pack 2.1 (on BO) before this weekend on production environment.
Can you please help us if you are having any idea why this error occurs upon BO fix pack 2.1 installation.
Regards,
Ravi Kumar Garre
Edited by: Ravi Kumar Garre on Dec 3, 2009 3:02 AM

Hi Ingo,
The query works well in SAP BI side using RSRT / BEx Analyzer.
I have created a new universe on same BI Query, still the problem exist.
We have created one new BEx query on same InfoProvider and then Universe. It works fine.
Regards,
Ravi Kumar Garre

Crystal Reports 2008 SP2 - Fix Pack 2.1 Readme

Hi,
Where can I find a readme of the Crystal Reports 2008 SP2 - Fix Pack 2.1 with the list of fixed issues?
Specifically does this fix the issue of dates when using .NET datasets and ADO recordsets (ttx files)?
Regards
Craig

Is this not considered a critical breaking change? I think 6+ months is a long time to wait especially given we had to wait for SP2 in the first place for other fixes. Now we find we cant go to SP2.
Is there anyway to get this esculated?
What if SP3 hs another breaking change?
Hopefully your will locate release notes, why is it that SAP dont appear to make these readily available for new serice packs and fix packs? We seem to go through this everytime?
Craig

BO Fix Pack Deatils

Hi ,
Could you please tell me BO XI 3.1 Fix Pack versions and what are the issue that has been fixed on each version?
We are planning to go for new installation of XI 3.1.And would like to Migrate reports, universe, users, and groups from XI R2 version to XI 3.1.
Kindly provide some suggest on new installation (About the service pack and Fix pack for XI 3.1 installation)
Could you please tell me is there any problem in migration (from XI R2 to XI 3.1 version).
Regards,
Sridharan Krishnan

Hello,
if you start an XI 3.1 installation from scratch i would recommend you install the latest version which is XI3.1 SP3
You find the fixed issues in the "fixed issues.pdf" for each FP/SP. Just simple navigate to the Download if the FP/SP and click the "Info" Button.
We dont call it actual a migration from Rel.2 to XI 3.1. Its more an upgrade which means it is simpler as a migration from 6.5 to XI 3.1. You maybe want to consider the Upgrade Guide which can be found here:
https://websmp104.sap-ag.de/~sapidb/011000358700001646952008E/xi3-1_bip_upgrade_en.pdf
Regards
-Seb.

Unable to update existing V9.7 Fix Pack 9 installation on Windows .

Hi All
Using Administrator id , I am trying to upgrade the fix pack in Development system.I have encounter the following error as per attachment attach , When I continue nothing seems to be updated .It still shows fix pack 1 .
I have manage to upgrade the fix pack 9 on (Training System ) & (Portal Training System) with no issue, never had this error prompt out .
Please advice .
Regards
Clement

Hi Clement
Could you refer the SAP Note for DB2 FP
101809 - DB6: Supported Versions and Fix Pack Levels
BR
SS

Report Selection Formula Error with Crystal Reports 2008 SP3 Fix Pack 3.5

Hello,
My name is Carlos, and I would like to report a defect found in the Crystal Reports 2008 SP 3 Fix Pack 3.5 Runtime that is affecting the majority of our reports. As well, I would like to ask if there is a simple workaround that does not involve updating hundreds of reports.
The issue is that the runtime engine incorrectly returns the report selection formula. I have included sample code showing what I mean.
To reproduce;
1. Create a simple report that has a date range filter like:
({Orders.Order_Date} >= {?START_DATE})
AND ({Orders.Order_Date} <= {?END_DATE})
2. Create a test app as follow that loads a report using the following code:
ReportDocument rpt = null;
try
rpt = new ReportDocument();
rpt.Load("TestReport.rpt");
this.txtMessage.Text = string.Format(
    "ReportSelectionFormula:{0}{1}",
     Environment.NewLine,
rpt.RecordSelectionFormula);
catch (Exception ex)
this.txtMessage.Text = ex.ToString();
3. Install Crystal Reports 2008 SP3 Fix Pack 3.5 Runtime [https://smpdl.sap-ag.de/~sapidp/012002523100006341772011E/cr2008fp35_redist.zip]..
4. Execute the app.
At this stage, the screen shows
ReportSelectionFormula:
(   ( NOT {Orders.Order_Date} >= {?START_DATE} )   AND   ( NOT {Orders.Order_Date} <= {?END_DATE} )   )
The expected value is:
ReportSelectionFormula:
(   ( {Orders.Order_Date} >= {?START_DATE} )   AND   ( {Orders.Order_Date} <= {?END_DATE} )   )
If we were to repeat the same test above but use the Crystal Reports 2003 SP3 runtime (i.e. no Fix Pack), which can be dowloaded from [https://smpdl.sap-ag.de/~sapidp/012002523100007123592010E/cr2008sp3_redist.zip], we would get the correct report selection formula. A side-effect for this incorrect report selection formula is a runtime exception complaining about an errorkind and a boolean being expected.
Do you know if there is any workaround that I can apply in code, perhaps a different Fix Pack? Is there a Fix Pack expected to be released soon? It is not practical for us to update our reports and use a different style in the record selection formula because we have many such reports, and our customers probably have even more.
Thank you.
-Carlos.

Already a known issue, here's the [KB 1584095 - A boolean NOT is added at the beginning of a record selection formula when the report is loaded by the Crystal Reports .NET SDK |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383334333033393335%7D.do]

SP3 and Fix Pack 3.1 errors.

Similar Messages

Maybe you are looking for