SP4 Problem to add information in headers
Hi,
I have a problem with a filter in which i would like to add some information into the header.
The filter works well with SP1, but doesn't work with SP3 nor SP4.
The proxy server is used as a reverse proxy.
I have tried the two following methods:
1.
param_free(pblock_remove("login", rq->headers));
pblock_nvinsert("login","toto",rq->headers);
2.
fullheaders=pblock_findval("full-headers",rq->reqpb);
fullheaderswithlogin=MemoryAlloc((strlen(fullheaders)+strlen("toto")+5)*sizeof(char *),sn,rq);
param_free(pblock_remove("full-headers",rq->reqpb));
pblock_nvinsert("full-headers",fullheaderswithlogin,rq->reqpb);
Any ideas about this problem?
Thanks a lot !
i got the soln..
Similar Messages
-
How to add information in account segment
How to add information in account segment , can i create item segment similarly to account segment. I am complete new to the SBO system so can any one help me.
Edited by: maskeyshekhar on Aug 9, 2010 3:34 PM
Moderator message: relation to ABAP development is unclear, could be technical or functional or anything, please describe your problem in all detail in the appropriate SCN forum.
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
locked by: Thomas Zloch on Aug 9, 2010 12:37 PMHi KM,
Doesn't seem to be quite straight forward.
Similar query in below article.
Custom
attributes added to user objects not visible in OWA address book
You might go through Introduction to Outlook Web App Customization 2010 and see if you can find anything useful.
"How to Customize the Outlook Web App (OWA)Sign-In page in Exchange 2013"
http://careexchange.in/how-to-customize-the-outlook-web-app-owasign-in-page-in-exchange-2013/
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you. -
Need to add information/data to the Quote Print output for a quote
I am trying to modify the print quote output generated after selecting a quote on the quote form. I need to know how to add information to this output.
I am not sure where the output is selected from. How do I modify the select to include information from other tables in oracle. I am using the ASOPRINT.xsl routine. Any help would be greatly appreciated.
Charles HardingHi,
From the xsl file I could figure out that the data for the quote lines is generated from the line <xsl:call-template name="line.table">. I would like to have some conditions added to it so that I can have particular type of items displayed on the PDF output. I am unable to figure out where I can add these conditions. Could someone help me in this? Any help would be appreciated.
Thank You,
Sowjanya -
Can't add files filmed in 1080/60i to Premiere Elements 12. I have no problem to add files filmed in 1080/30p. My camera is a Nikon aw1
lurkfan
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update using an opened project's Help Menu/Update?
If not, please do so.
Please clarify "Can't add files filmed in 1080/60i to Premiere Elements 12."
Are you importing the 1080 60i into the project using (Expert workspace) Add Media/Files and Folders/Project Assets?
If so, are you getting an error message inside of the video appearing in Project Assets?
Are you setting the project preset manually or letting the program do that task automatically?
What is the project preset?
(See Edit Menu/Project Settings/General).
The project preset should be, for your 1080i...
NTSC
AVCHD
Full HD1080i30
What is the project preset for the 1080p footage?
(Also see Edit Menu/Project Settings/General.)
The project preset should be, for your 1080p
NTSC
DSLR
1080p
DLSR 1080p30 or DLSR [email protected]
Since your camera appears to be producing AVCHD.mov files, do you have the latest version
of QuickTime installed on your computer with Premiere Elements 12/12.1?
The answers will be in the details. Please review and then let us know the details and results
based on the above.
Thank you.
ATR -
Problem with Billing Information
Hello,
Just recently, about 5 months ago, I recieved a Visa giftcard for graduation. I used that as my billing information; chose VISA as the card and then put in the card number. After I was done picking my desired songs, it told me there was a problem with my information and that it had been declined or something. It also said I would have to resolve it before I would be able to purchase more songs.
So are we not allowed to use VISA gift cards? Now I have a iTunes gift card that I want to use and it wont let me because this previous problem has not been resolved. What do I need to do? I'd rather not have to repay this or have to use this iTunes gift card to pay for it. There was money on that VISA card and I used it to buy songs. I do not have a credit card to repay it either. What do I do?
Thank you so much.I experienced the same problem around the same time. After several less than helpful and very frustrating emails from Apple Support, I happened upon a very simple solution that solved my problem. I went into "Edit Payment Information", and I re-entered my credit card information, security code, etc... just like I had tried a thousand times before. BUT this time, I TYPED IN A SPACE AFTER MY FIRST NAME. It worked. It finally accepted my credit card information.
They tell you to enter your name just as it appears on your bank statement. It just never occurred to me that they meant to include spaces. I would assume that if your bank prints your middle initial on your statement, you should include that in the "First Name" box as well along with any applicable punctuation. For example, Joe(space)S.(space).
I offered this advice to my friend as she was having the same problem, and it worked for her, too. So, you might want to give it a try.
Message was edited by: Max Colevan -
Can't add information and tags in itunes with Windows 8
I just got a new computer with Windows 8. I installed itunes and moved my library but it won't allow me to add information and tags. The box won't open when I right click on a track, and when I try to do it from file and get info the area is greyed out.
Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
You might also want to kill any "mystery" identities that have come over from the old computer...
tt2 -
We add information, eg , name of peron in photo and information about where it was taken, to our photos on one laptop, when they go via the Photostream to our other laptop the information is not transferred. Can this information be transferred, we do not want to have to enter it again on the second computer.
Welcome to the Apple Community.
No, only the photo is added to photo stream, your tags etc, are specific to iPhoto. If you want to share more than the photo use shared streams and add comments. -
Add WS Security Headers to a Web-Service Request in JDeveloper
I'm using JDeveloper to create a composite that performs a query against CRMOnDemand. In order to access CRMOnDemand in a stateless manner, I have to create a SOAP request with the following in the header:
<wsse:UsernameToken>
<wsse:Username>USERNAME</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">PASSWORD</wsse:Password></wsse:UsernameToken>
How do I add these to the SOAP header message within the JDEVEOPER ui?I've figured out...
Map<String, Object> reqCtx =
((BindingProvider)iditInterface).getRequestContext();
Map<String, List> reqHttpHeader =
(Map<String, List>)reqCtx.get(MessageContext.HTTP_REQUEST_HEADERS);
if (null == reqHttpHeader) {
reqHttpHeader = new Hashtable<String, List>();
List header1 = new ArrayList();
header1.add("[header1-value]");
reqHttpHeader.put("[header1name]", header1);
List header2 = new ArrayList();
header2.add("[header2-value]");
reqHttpHeader.put("[header2name]", header2);
reqCtx.put(MessageContext.HTTP_REQUEST_HEADERS, reqHttpHeader);
I used the above code to add the HTTP headers, before I call the webservice interface. -
Facing problem to add component in a panel dynamically
I face serious problem to add component dynamically on a jpanel. can any one help me?
I have one panel inside a frame. And I have another 3 or 4 panel. dynamically i want to change the panel inside the frame with the other panel.
can anybody help me with source code?
Your earliest response is highly appreciated.remove is reflected immediately without calling
validate() but it does not work for adding. please
give me some code.Post a small demo code that is generally compilable, runnable and could reproduce your problem. See: http://homepage1.nifty.com/algafield/sscce.html and http://www.yoda.arachsys.com/java/newsgroups.html -
How do i add information to an existing document
how do i add information to an existing document
Not sure what you mean. What application are you trying to use?
-
Adobe Reader 9.3.3-CPSID_83708 is causing problems but ADD/DELEATE will not allow me to deleate. Why
Adobe Reader 9.3.3-CPSID_83708 is causing problems but ADD/DELEATE will not allow me to deleate. Why
Do you have admin rights on your system? Can you uninstall other programs?
If yes and you still think you have downloaded wrong update, use windows cleanup utility to remove this installation. You can find cleanup utility at several websites eg.
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html
Then reinstall 9.3 Reader from adobe website and update it to 9.3.3 using Help>Check for updates. -
URgent !!!!!!!!! How do i add information to server.xml of tomcat
Hi ,
I want to add the conext information to my server.xml of tomcat for my hibernate configuration.....
the conext information is as follows ....
<Context path="/quickstart" docBase="quickstart">
<Resource name="jdbc/quickstart" scope="Shareable" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/quickstart">
<parameter>
<name>factory</name>
<value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
</parameter>
<!-- DBCP database connection settings -->
<parameter>
<name>url</name>
<value>jdbc:postgresql://localhost/quickstart</value>
</parameter>
<parameter>
<name>driverClassName</name><value>org.postgresql.Driver</value>
</parameter>
<parameter>
<name>username</name>
<value>quickstart</value>
</parameter>
<parameter>
<name>password</name>
<value>secret</value>
</parameter>
<!-- DBCP connection pooling options -->
<parameter>
<name>maxWait</name>
<value>3000</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>100</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>10</value>
</parameter>
</ResourceParams>
</Context>
Where in my server.xml should i put
the server.xml looks like this :
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.core.AprLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<Listener className="org.apache.catalina.storeconfig.StoreConfigLifecycleListener"/>
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="8080" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443" maxHttpHeaderSize="8192"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
</Host>
</Engine>
</Service>
</Server>
Can Some one Help me pleaseeeeeePlease don't cross-post in multiple forums. I have answered
this in your other thread. -
Active Directory - SharePoint Replication Problem with User Information
Hi, we have a implementation of SharePoint 2010 stand alone server, when we start to work in this server, we add the users from Active Directory services implemented in our company. This users had information like the email and department. When i add one
user to SharePoint, sharepoint import all information user.
The problem is when i change the email information from the user in Active Directory, this information didnt replicate to SharePoint. The user have the new email In Active Directory and the old email in SharePoint.
How can i replicate new one all information from the user to SharePoint?
I hope someone can help me..
thanks.Standalone installations of SharePoint do not support the User Profile Sync Service. You'll want to use a farm installation for that functionality.
Are you using SharePoint Foundation, Standard, or Enterprise? The UPSS only comes with Standard and Enterprise.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Having a problem with Add-ons I did not install and now can't uninstall.
Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
PLUG-INS-
Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
Mozilla Default Plug In
(THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
Itunes Application Detector 1.0.1.1
Itunes Detector Plug-In
Wacom Dynamic Link Library 1.1.0.3
Wacom Dynamic Link Library
Windows Presentation Foundation 3.5.30729.1
Windows presentation foundation (WPF) plug-in for Mozilla Browsers
EXTENSIONS_ Java Console 6.0.23
Java Console 6.0.20
(Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!For camera problem try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
I do not understand what you mean about your update problem -
Add information to the replicated PO in backend
Hi!
We have a need to add some information to the PO that has been replicated to backend. The information is related to the Intrastat reporting. But since we are using Extended Classic this is a problem, the PO is not modifiable.
Is there a BADI or anything that could help us?
Sincerely
Anders ÖhrlingHi. Sorry, got my BADI's confused the first time.
If you want to enrich from ECC, you could try user exit SAPL2012 on BAPI_PO_CREATE1 and say that if the PO type = SRM (EC or ECPO or whatever) then put in the extra data.
This would put extra data in while the PO is being created.
I am not sure if there will be anything extra you can do to the PO from ECC than by using the BADI in SRM though.
Alternatively, and I would strongly recomend against this, but you could try in a sandbox system, you could use the user exit in ECC to set the PO status (EKKO-ESTAK) to something different than "K". Probably "I" would be the best to try.
"K" means sent from SRM, this is what stops the PO being changed in ECC.
This would make the PO completely editable in ECC.
You would have to make sure no-one has any access to the PO by checking the roles, then you could write a program to change anything you want on the PO at any time.
You would have to carefully check the whole process though, goods receipts, invoices and so on, and be very careful to check that all the data is passed between the 2 systems correctly this way.
Regards,
Dave.
Maybe you are looking for
-
Sales order with reference to quotations.
Hello Experts , I want to know how can a sales order be created with reference to more than one quotation?? Is there a transaction to do this ?? or else its a process?? Please guide. points will be rewarded to the answers. Thanks, Arathi
-
Compile Form Responses into a Single pdf in Acrobat X
I sent a single pdf using the Distribute function in Acrobat X to several different people. I was under the impression that I would be able to merge all responses into a single pdf document. Each form field has a unique name and each field will be
-
After market battery: Do I have a right to be concerned?
My company develops software and because some of it addresses some of the lower level aspects of the operating system, we periodically need to purchase used units for testing. We picked up a 1.3GHz, 12" PowerBook on eBay for a few hundred bucks knowi
-
QM_Change of base unit of measure not possible
Dear QM Experts, Scenario is, 1. Material master created with QM view activation. 2. The Base Unit of Measure kept as EA 3. Inspection plan prepared for material with usage 5 and status 4. 4. Material has not undergone any purchase or
-
Can't install Update/Version Cue
When I try and update using the Adobe updater for Photoshop CS3, I get a message that "Adobe Version Cue Client 3.1.0 update failed to install because the update cannot be applied to the product. Please re-install the product and try again." Did that