SP6000 not starting - error code 62

Satellite Pro 6000 (part # PS600U-01RCV9) doesn't boot. When A/C power is connected the left indicator light is green. There is no external battery. Then when power button hit the indicator light flashes amber 01000110 (hex code 62). The clock had been inaccurate for years but the machine otherwise functioned normally. I replaced the RTC battery and the problem persists. Holding down power button for 5-30 seconds not helpful. I would appreciate any suggestions, other than the obvious of buying a new computer.

http://www.hardwareanalysis.com/content/topic/51345/Sat-semipro wrote:
Satellite Pro 6000 (part # PS600U-01RCV9) doesn't boot. When A/C power is connected the left indicator light is green. There is no external battery. Then when power button hit the indicator light flashes amber 01000110 (hex code 62). The clock had been inaccurate for years but the machine otherwise functioned normally. I replaced the RTC battery and the problem persists. Holding down power button for 5-30 seconds not helpful. I would appreciate any suggestions, other than the obvious of buying a new computer.
Found this site: http://www.hardwareanalysis.com/content/topic/51345/
Had the following information:
The error code begins with the least significant digit.
Example: Error code 12h (Error codes are given in hexadecimal format.)
62h
C3V voltage is not more than 2.81 V when the computer is booting up
Many sites narrow it down to a Motherboard or Power issue.
Good luck
========================================================
QOSMIO - x505 q8102X
i7-2630QM , GTX 460m , 18.4" screen @ 1680x945p

Similar Messages

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Bonjour Service Will Not Start - Error Code 87

I'm unable to start the Bonjour service as I get an error code 87 when starting it. I've followed the apple support recommendation of uninstalling all itunes components and reinstalling but I still get the same issue
Can anybody help with this please?

Thanks.
I turned up this thread while researching:
http://discussions.apple.com/thread.jspa?threadID=2406705
So I'd try the two positive suggestions from there.
First try disabling the BonJour Service prior to attempting the iTunes install (I've seen that trick work sometimes with more-standard sorts of BonJour 1920/1921s).
If still no joy, perhaps check for any signs of Winsock corruption as described in the following Microsoft document:
[How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista|http://support.microsoft.com/kb/811259]
Any luck with either of those two measures?

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

"connection not available error code - 4161" what...

Hi
I have been trying to upload my workouts to Nokia traker but when I start the application I get the following "connection not available error code - 4161" What does this mean and how do I sort it
Thanks

I did a comparison, and your connection string is different
than mine. Mine does not show any password/userid entries, but
perhaps that's the difference between using SQL and SQL Express.
(I'm using SQL.) I am, of course, assuming that you have actual
values for "servername," "database," etc.
Given that you can't get in from RSC Explorer, it would seem
that either you are not using the same userid/password as the one
you set up for the administrator when you created the DB, or else
there's something wrong with the DB itself.
Try creating a test DB. Be careful to specify the same
administrator name and password as the login you use to get on the
RSC server. After you've created the test DB, open it up from RSC
Explorer. If you can do this successfully, then everything ought to
be working OK. From that point, I'd start over and create a new DB,
and upload to that one. (In fact, I've actually gone through
exactly that total exercise before.
G

T22 ethernet card cannot start error code 10

i iust bought this computer trying i have t22 2647 m2u trying to find driver for ethernet card ive tried several drivers from different sights none seem 2 work all say cannot start error code 10 i tryed 3com mini pci card and and intel 10/100 sp mobile combo i have win xp sp 3 anything else you need to know email me sorry if didnt do something right on this im new at this posting

Welcome to the forum!
The problem here is most likely that there is no ethernet card installed, although there is a port in the back, since that's the way machine had left the factory:
Product: ThinkPad T22 2647-M2U [change]
Operating system: All [change]
Original description: PIII 900MHz (256KB), 128MB RAM, 20.0GB HDD, 14.1 XGA(1024x768) TFT LCD, 8x-2.3x DVD, Modem, TV out, Li-Ion battery, Win98SE
But don't worry, you can get a combo modem/LAN card for a few bucks nowadays.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

HT5622 I received masseage ( your request not processed error cod 1009

I try to download Skype , and when I start downloading received this masseage
Your request not processed error code 1009
What I should to do

What country are you in, and are you trying to use another country's store ? The 1009 error is usually due to trying to use another store.

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

Apple Mobile Device service is not started error 1067

Apple Mobile Device service is not started error 1067 in Windows 7.

Thanks Ryan Sensei. I followed your link. Though I didn't have any Megaupload software installed on my computer, I saw a related article on http://senseiphone.com/fix-apple-mobile-device-not-started_itunes-0315129/ which was my actual problem and fixed it perfectly.

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HT4623 I can not get connected to App Store , download or update any apps, EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED , ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

Try contacting the iTunes support staff, they do the app store also, at: http://www.apple.com/emea/support/itunes/contact.html

I tried to empty my trash and could not - an error code 8003 showed up and stopped me. What can I do to empty the trash?

I tried to empty my trash and could not - an error code 8003 showed up and stopped me. What can I do to empty the trash?

Look to the right under 'More like This' - many good sugestions there.

My Mac OSX is coming up with error message when i try to write a disc "The disc can't be burned because the disc drive is not accessible (error code 0x80020020)." Same also when I tried my external disc writer-any clues?

My Mac OSX (version 10.7.5) is coming up with error message when I try to write a disc "The disc can’t be burned because the disc drive is not accessible (error code 0x80020020)." I have tried several discs with the same message - Same also when I tried my external disc writer. Both disc drives will read my discs that have music or photos on it, it just won't write any new discs - any clues?

Hi Klaus1
So, I tried all the suggestions and followed the links - all to no avail.
as you can see, (screenshot below) my iMac is a 21.5 inch late 2009 model which isn't showing in the updates listed above
My system report shows that my Mac has the following:
I reset the PRAM and the SMC - still have the same error message when I try to burn discs. I've used both CD's and DVD's and tried with my external Discwriter too.
Any further suggestions??

SP6000 not starting - error code 62

Similar Messages

Maybe you are looking for