SP9 Patch 1 blows away the PCD and pcdContent folders!

Hi,
I experienced this problem on two different systems. After the patch 1 install, only the HTMLB.jar file is present in the PCD directory which is the only one the patch is supposed to install and the pcdContent folder is gone.  I looked into the sapinst log file and noticed a step that was interesting:
==================================================
Info: ***** Begin of File-System Deployment com.sap.portal.htmlb *****
Info: Deploy Action is UPDATE
Info: Update - step 1/3: save previously deployed files
Info: No Fileset to be saved found - skipping this step
Info: Update - step 2/3: remove previously deployed files
Info: All previously deployed files could be deleted successfully
Info: Update - step 3/3: deploy new files
Info: Deploying Fileset HTLMB / htlmb_FS to E:usrsap/DEV/JC00/SDM/../j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd
Info: Fileset HTLMB deployed successfully
Info: ***** End of File-System Deployment
==================================================
So, it appears that it skips the step of saving the previously deployed files but I don't know why.  No Fileset found??  It goes ahead and deletes the previously deployed files which in step 1 said it couldn't find!
As a test, when the error message occured at the end of the install, I copied the files from a backup (excluding the htmlb.jar) and clicked retry and it completed without an error message.  But, since I didn't get a clean install, I backed it out anyway and I plan to open a OSS message.
SAP issued Note 790767 stating this was an error that could be ignored.  The problem is that the pcdContent folder is missing and it can't read the properties file!  How can this be ignored??
Can some one shed some light on this?  Why are some people getting this to install without issue and some aren't?
Thanks,
Andrew

Yes i agree, i got the following error too during the install.
"ERROR 2004-12-16 10:28:59
FJS-00003  TypeError: fMgr.getNode(j2eePath + "/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcdcontent") has no properties (in script InstallationScript_78, line 17433: ???)"
but i renamed the temp directory in deployment dir to pcdContent and it finished with no errors and the portal too works fine.
And this happened to me with both of my installs- Centarlized and Distributed.
Hassan

Similar Messages

  • BIDS 2008 - Making changes to underlying schema at what point is it better to just blow away the cube and rebuild?

    What are some tips or other things you have come to discover or use when making schema changes to the underlying database -vs- impact on the cube and dimension usage etc?  Is it easier sometimes to just start over with the cube?  I realize you
    can make schema changes and refresh the DSV, but if you change column names of the keys in the Fact table(s) or others, then likely you will have to reconfigure all the impacted areas in your cube.  Have you ever had BIDS just get confused similar to
    how it gets confused sometimes when doing SSIS or SSRS projects?

    Hi Shitbit,
    For a SQL Server Analysis Services database, when changes occur in the schema of an underlying data source, you can refresh the data source view to incorporate all of the changes to each of the underlying data sources. Refreshing a data source view updates
    the whole data source view.
    if you change column names of the keys in the Fact table(s) or others.
    In this case, you changed the relationships between fact table and dimension table. So you need to configure it manually. Please refer to the link below to see the details.
    https://msdn.microsoft.com/en-us/library/ms178448.aspx?f=255&MSPPError=-2147217396
    In your scenario, it's hard to understand your exact requirement, it would be nice if you can provide us more infromation about your environment, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Missing Adobe PCD and SLstore folders for Adobe Illustrator in Win7

    I can't open my Adobe Illustrator and it says: Error 16.
    Configuration-error. I only find the SLstore folders for Adobe PS,
    but not for Illustrator CS6 ( 64bit). And the Adobe PCD is not there at all.
    My system: Windows 7 Ultimate 64-bit SP1
    I read somewere that you can also place a slstore folder in the right location.
    Is that true?
    Please help. Regards,

    Benjamin1964 the SLCache and SLStore folders should be able to create themselves.  Error 16 indicates there is a file permission error preventing the creation of the folders.  You can find more details on how to correct this at Configuration error 16 | CC, CS.

  • Removed photo's still in the Modified and Originals folders

    I removed all pictures from my Library (iPhoto '08). There still remains more than 1 GB of space. I see a lot of photo's I removed in the "Modified" and "Originals" folders. Can I remove them without destroying the Library? (I need the library because of the keywords etc.) Or is there another solution to make the Library minimal again?

    I removed all pictures from my Library (iPhoto '08). There still remains more than 1 GB of space. I see a lot of photo's I removed in the "Modified" and "Originals" folders.
    Have you empied the iPhoto trash - iPhoto menu ==> empty trash?
    When I duplicate the library and remove from both libraries the part I need in the other library, you don't get all free space, the removal of pictures would suggest. So the two Libraries together use much more space than the original library.
    This is a different question that you originally ask
    TO split a library I would recommend using iPhoto library manager - http://www.fatcatsoftware.com/iplm/
    It will move photos and keep their attibutes - http://www.fatcatsoftware.com/iplm/Help/preserving%20photo%20attributes.html
    LN
    LN

  • I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why

    I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why.

    Open with iDVD.app in your applications folder.
    or download VLC.app
    http://www.videolan.org/vlc/download-macosx.html

  • HT1178 where do i find the utilities and application folders on my computer

    Where is the utilities and application folders on my Mac? I am trying to set up my Time Capsule

    The Applications folder is at the top level of the internal drive, and the Utilities folder is inside the Applications folder.
    (85745)

  • How do the User and Shared Folders relate to the main drive? Can we delete?

    I'm curious how the User and Shared folders relate to the main hard drive and if there is duplicate files in these folders and the main hard drive. Some software programs I have seemed to have loaded content/info into these folders and I'm wondering why they put files in there instead of just the regular main hard drive pathing. These 2 folders are more confusing than anything. I can see that might be of use to a family and each family member wants to keep files in a personal file, but when I'm the only one using my computer, it seems like I should have the option to remove these folders completely, but I don't because I feel like I would be deleting some important files that I wasn't aware were in these folders.
    Another thing is, when I click on User folders (at least I think it's the User and not Shared folder), it brings up my name and 'Shared' in 2 seperate subfolders. Is anything in these folders duplicates of what's on my main hard drive? Is there anything significant about these folders if I'm the only user on my computer?
    I would nice to get rid of clutter and to eliminate options for software to install things by deleting these folders and not have home/user/shared folders. Is that possible?

    stikygum wrote:
    Yeah, I'm really low on space, so I'm going about a bunch of different consolidating options. But I mainly posted my main question to help me understand what 'stuff' is in the User and Shared folders and whether or not they act like an Alias, in order to help me make an informed decision what is best for my needs.
    They are not aliases; it is a hierarchy, and there is intentional duplication at different levels. This is a feature.
    First thing is that Users and Shared are at different levels. Users is at the top level, but Shared is one level inside Users, at the same level as any other user account you have created.
    Therefore, if you delete the Users folder, you delete all user accounts, which means you delete all personal data. OS X probably won't even let you delete the Users folder unless you start up from a different hard drive, because you can't delete your user account while you are running in it.
    Now, more about the hierarchy. The intentional duplication is so that documents and software can exist for individual users or all users. For example, there are multiple Applications folders:
    Hard Drive\Applications - applications any user can see, installed at the system level
    Hard Drive\Users\username1\Applications = applications only that user can see
    Hard Drive\Users\username2\Applications = applications only that user can see
    In the same way, there are multiple Preferences, Cookies, Application Support, etc. folders at different levels, for the same reasons.
    If you do not know what you are doing and you delete one of these folders that "looks like a duplicate" you could cripple some essential part of your system or your account. That is why people are telling you not to do this.
    The Shared folder is there because if you are in one user account you are prevented from seeing the files inside other user accounts. (Because you don't want other accounts to be able to see your personal data.) If you want to share files with others in your house using the same Mac, that's a problem. But the Shared folder solves this. if you want some files to be accessible to all users, like some photos or music, just put them in the Shared folder and now anyone with an account on that computer can see those shared files.
    The reason shared files are not simply stored at the top level is because everything above the Users folder is supposed to be reserved for the system. User-specific are supposed to stay in the Users folder. That is why they put the Shared folder in there.
    If you are not using the Shared folder and are just eyeing it because you want to free up some disk space, well, it probably won't help to delete it. Because if you are not using the Shared folder, it is probably not taking up much space, even though you see stuff in there. And if there is stuff in there taking up space, first figure out if someone put it there for a reason before you delete it.

  • Deleted files from the Original and Data folders - help?

    Hello,
    I imported my fiance's iphoto library to try to recover photos that I lost from when my hard drive crashed. They first were not importing into iphoto (while the files were on the harddrive), so I placed them in my Originals/Data iphoto folders. Now I have 6-8 versions of files that I don't even necessarily need, mostly thumbnails and a few of the original files.
    I know I have made a lot of mistakes... so at this point what do I do- I've stopped manually deleting folders from these categories, but I do not want to lose what precious pictures I had from before the harddrive failure, and how do I get back to a iphoto library without duplicates?
    Please advise!!! Thank you!

    My library still opens within iPhoto- will it continue to do so? Do I need to do anything now (since I have already messed with the Originals and Data folders?)
    In addition, iPhoto now shows me blanks for some pictures/events, is there a way to have iPhoto scan the entire computer and realize files are missing and to ignore them?
    Therefore it is not a fully functioning iPhoto library - it is corrupted
    3 - if you do not have a fully functioning iPhoto library then quit iPhoto and drag the iPhoto library to the desktop, launch iPhoto and create a new library and then open the bad iPhoto library on the desktop and open the originals folder and drag each folder from it onto the iPhoto icon in the dock (or the iPhoto event window) to create events with all of your photos, then back up and run duplicate annihilator
    Since you have corrupted your library you can do anything you want to it before you create a new one from the remaining photos
    LN

  • I could only browse files on my android phone in adobe dc app in the gallery and image folders but not other folders

    I could only browse files on my android phone in adobe dc app in the gallery and image folders but I could only browse files on my android phone in adobe dc app in the gallery and image folders but not other folders

    Hi Buckyball1982,
    What version of Android phone are you using?
    Do you have a built-in file explorer or any third party File explorer installed on your phone?
    If no, then i would recommend you to install a File explorer on your phone and then you would be able to browse files from within the Acrobat DC app on your Android phone.
    Regards,
    Rahul

  • Pismo: a quiet burial or roll away the stone and revive it?

    I have been trying to revive a Pismo PowerBook G3 400 Mhz for secondary uses. When received, the Pismo had only 64MB in its bottom RAM slot, and no RAM in the top slot. It would only boot with the alternating folder icon/question mark, but it would boot.
    I sought out and obtained an Airport Card, and two Pismo RAM sticks, 256MB and 512MB.
    A few days ago I obtained the Pismo 256MB RAM chip, and put it in the top slot on this Pismo with the original 64MB on the bottom. The Pismo ran okay with the 256MB + 64MB, except I had to boot from an external firewire drive, running Tiger 10.4.2. I figure the old 10GB internal can't handle the Tiger system I put on it (or Panther, which I also tried), or more likely it's just had it's day.
    Then yesterday, the 512MB chip arrived, and I've installed it.
    I was going to replace the hard drive but couldn't (I don't have the right Torx screwdriver yet for the hard drive black screws) so I put the computer back together, 512MB chip on the bottom and 256MB on top.
    It stopped working totally. Black screen, so startup sound, no sounds at all, nothing spinning, nothing at all. A reseat of the processor card brought a little noise, but nothing starting up, no chime, no display.
    I tried the reset button, retraced all my steps taking it apart and back together 10 times, reseated the RAM carefully in different combinations, put back the original 64MB chip on the bottom and the 256MB on top, and other combinations. Now nothing works. Nada. Zip. No combination of the RAM works either, nor any of the RAM by itself.
    Any idea what I've done to this poor machine? Everything looks fine, and it sure was working, although without the internal hard drive, only an external firewire drive, before I tried adding the additional RAM yesterday. What have I done?
    I used the pbfixit.com instructions for changing RAM in a Pismo, so I went through these steps:
    Computer off, unplugged, grounded, removed the battery, removed the keyboard, removed the heat shield, removed the airport card, removed the PRAM battery, removed the heat sink, removed the processor card that has the RAM slots on it, replaced or switched the RAM, had a look at the hard drive, replaced it carefully without having disconnected it, and then all of that in reverse.
    I have removed the PRAM battery again. I have checked the mmc2 slot for bent pins. I have made sure I heard the 'click' when reseating the processor board. I have reset the machine with the power management button on the back.
    The power on button did not power anything at first. I hear a very small noise now when the power is pressed, but there is nothing on the display, and there is no startup chime.
    Thanks for any advice you might have, I hope I'm just missing something easy.

    mmichael,
    Hardy gave you the link for an excellent, high-capacity battery; I would not consider anything else.
    Apple has not put their logo on new lithium ion batteries for the black G3s for at least a couple of years, so even if the "new" battery has never been used, I would avoid it like the plague. Once you read this article, you will have your answer.
    ----------quote------------
    First a few facts about Lithium Ion batteries:
    1. Lithium Ion batteries, unlike the older Nickel-Cadmium rechargeable batteries, are not subject to a "memory effect." The memory effect, which occurred with Nickel Cadmium batteries, resulted in a loss of battery capacity from repeated partial discharge/charge cycles. The memory effect could be overcome by one or more deep discharge/charge cycles, referred to as "battery conditioning." Battery conditioning is definitely not necessary with Lithium Ion batteries and it will not increase their capacity or ability to hold a charge.
    2. Lithium Ion batteries have a finite lifespan in terms of the total number of discharge/charge cycles that they can endure before they wear out. With repeated deep discharges they are capable of about 500 cycles. With partial discharges, they may endure as many as 1000 cycles.
    3. Regardless of the number of discharge/charge cycles, Lithium Ion batteries are subject to aging. They have an absolute lifetime of two to three years.
    4. Lithium Ion battery packs have sophisticated built-in charging systems that prevent overcharging. Therefore laptop battery chargers can be left connected indefinitely without tangible risk overcharging or otherwise damaging the battery. Damage to the battery from overcharging would only occur in the very unlikely event of a malfunction of the charging system.
    5. Lithium Ion batteries, except for batteries near the end of their life, have a low self-discharge rate on the order of 1% per day. A Lithium Ion battery that is not in use and not connected to a charger will not fully self-discharge until a period of several weeks has elapsed.
    ccds/2001
    -------------------end quote-------------

  • HT1660 When I install itunes, the xml and media folders are placed on desktop not in my music folder on Vista where I want them to be

    So I've installed and uninstalled itunes 3 times, using control panel to unintall everything, then ccleaner to make sure nothing is left over.  No ipod service and stuff left.
    Each time I install, the defult folder where the Media Folder, and album art folder plus all the xml and other files are put on my desk top. 
    Opening up Itunes, preferences, changed folder to user/music/itunes it doesn't work, keeps defaulting back to desktop.  Help please
    OS is Windows Vista

    Good to hear you got it fixed. A common reason for this issue is a problem with security permissions. This is another approach that may help in such cases.
    Repair Permissions
    Right-click on your main iTunes folder and click Properties,  then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
    If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
    Repeat with the media folder if it isn't stored inside the main iTunes folder.
    tt2

  • Messages from the Inbox and Sent folders are being transfered to the Outbox

    Why are the messages from my Inbox and Sent folders being transfered to my Outbox?

    There is probably something wrong with the Envelope Index file. In the few cases I've seen something similar, however, there was also something wrong with the structure of the Mail folder, and we must fix that before trying to re-create the index.
    In the Finder, go to ~/Library/Mail/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see the names of the files and folders present at the root level of the Mail folder.
    Before actually posting that information, you may edit it so that the file/folder names do not reveal any details you wish to keep private, e.g. you may replace any real username with "username" if you wish; similarly, you may disguise any domain names you don't want to be revealed. Try to be consistent in how you disguise those details, though, as we may need to refer to them in subsequent posts.
    Now, go to ~/Library/Mail/Mailboxes/. With that folder open, repeat the process to let me see the names of the files and folders it contains. Again, you may disguise any mailbox names you wish to keep private.
    Finally, locate the account folders within ~/Library/Mail/ -- their name begins with the account type (POP, IMAP, .Mac), followed by the account username and the incoming mail server. For each account folder, repeat the process to let me see the names of the files and folders it contains.
    Note: For those not familiarized with the ~/ notation, it refers to the user's ~ folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

  • Jsp code (js code) to display(tree) the files and sub folders in a folder

    Hi all
    plz can any one send me the source in jsp or js to display in tree structure for files and sub folders in a folder.

    There are dozens of Javascript tree widgets available on the Internet. Some are free. Some are good. Google will find them for you.
    (The only relevance of JSP to your question is that yes, you can generate HTML that uses one of those Javascript tree widgets.)

  • How can I have the inbox and other folders showing when I have a messaage open

    When I have a message open, I cannot see my inbox and other folders. I need to scroll back through messages at the top until I find inbox. Is there a fix for this or is that the new setup for Mozilla?

    Thanks heaps, makes it much easier. It was very frustrating. Thanks for quick answer.

  • I recently bought a neew ipad mini and have sync messages from my iphone. Which worked fine.  I just picked it up and I have only to messages and can't figure out how to get back to the screen with the inbox and other folders?

    I recently bought a mini IPAD and have sync messages from my iphone.  Now I am stuck under group message and can't get back to the main screen that has the inbox and the various folders.  Help??? 

    youngkristen wrote:
    So, our hope was we could just hook up the external to the mac and have it transfer seamlessly.  Is there any hope of that? 
    Yes there is, scroll down to the bottom of the following Switch 101 article and click on the arrow next to Manually migrating.
    Switch 101: Migrate your Windows files or system to your Mac

Maybe you are looking for

  • How to find out if a socket connection is interrupted

    Hi guys in one of my programs a thread checks every second, if in the DataInputStream of the socket is a new string to show. But if the connection is interrupted, it gets every second the string "null". How can I check if the connection is interrupte

  • Probelm with ppt content when working with apache hslf classes

    Hi to all, Please help me if you have a solution to this. I had a ppt, in that ppt i modified the content of second slide . Every thing is working fine.But the problem is when i open that modified ppt in ms office 2000 version the content of the modi

  • BP Internal Reconciliation problem

    Hi, I am working with B1 2007A PL41. When I click BP-> Internal Reconciliation-> Reconciliation, select BP and click reconcile. Then for  ARIN dated 1.August I change the amount to part amount and select an incoming payment dated 13.August - here too

  • I want to remove the amazon add-on - how?

    I loaded the amazon add-on but changed my mind - how do i remove it?

  • 3D features require min. 512MB vRAM but i have 1024MB.

    Hi, I have just installed Photoshop CC, and everytime i open the program i get a warning about "3D features require a minimum of 512MB of vRAM. Photoshop has detected less than that on your system." The problem is that i have a AMD Radeon HD 5450 wit