SPA 122 Firmware upgrade

We just upgraded SPA 122 to version 1..1.1 Ver 011. After the upgrade SPA cannot register to the PBX to which it was registered before. PBX doesn't even show any registration attempts by it. From the SPA we can ping the domain to which it is trying to register. Confused.

Thank you Patrick,
Here is the result of the capture after these instructions. Interestingly in this log I do not even see an attempt to register line 1. We have configured line 1 to register to localpbx and line 2 to register to babytel trunk...
++++ retry query scaps
+++ need tftp addr..
+++ send scaps discovery query
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-d519873d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12899 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
RSE_DEBUG: getting alternate from domain:nat.babytel.ca
CC_eventProc(), event: CC_EV_SIG_REGISTER_FAILED(0x3B), lid: 1, par: 0, par2: (n
il)
AUD_ccEventProc: event 59 vid 1 par 0x0 par2 0x0
SLIC_stopRing
SLIC_stopTone
[1]RegFail. Retry in 30
[rse_refresh_addr_list] query nat.babytel.ca block 0
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-adf86974
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12901 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
RSE_DEBUG: getting alternate from domain:nat.babytel.ca
CC_eventProc(), event: CC_EV_SIG_REGISTER_FAILED(0x3B), lid: 1, par: 0, par2: (n
il)
AUD_ccEventProc: event 59 vid 1 par 0x0 par2 0x0
SLIC_stopRing
SLIC_stopTone
[1]RegFail. Retry in 30
++++ retry query scaps
+++ need tftp addr..
+++ send scaps discovery query
[rse_refresh_addr_list] query nat.babytel.ca block 0
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
[1]->204.101.5.67:5060(658)
REGISTER sip:sip.babytel.ca SIP/2.0
Via: SIP/2.0/UDP 10.3.12.160:5061;branch=z9hG4bK-8a2f808d
From: "babytel" [email protected]>;tag=f55060d797aa79do1
To: "babytel" [email protected]>
Call-ID: [email protected]
CSeq: 12903 REGISTER
Max-Forwards: 70
Contact: "babytel" ;expires=3600
P-Station-Name: ;mac=ccef485c283e; sn=CBT154400J2
User-Agent: Cisco/SPA122-1.2.1(004)
Allow-Events: talk, hold, conference
P-Station-Name: ;mac=ccef485c283e; display=""; sn=CBT154400J2
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: replaces
RSE_DEBUG: getting alternate from domain:nat.babytel.ca
CC_eventProc(), event: CC_EV_SIG_REGISTER_FAILED(0x3B), lid: 1, par: 0, par2: (n
il)
AUD_ccEventProc: event 59 vid 1 par 0x0 par2 0x0
SLIC_stopRing
SLIC_stopTone
[1]RegFail. Retry in 30

Similar Messages

SPA 2102 - Firmware upgrade

I recently bought an SPA 2102. Of course it is unlocked (I have full access to user and admin). The Software Version is 3.3.6. The Hardware Version is 1.2.5(a). Everything is working fine. I went to www.linksys.com to upgrade the firmware. I noticed that current firmware is 5.1.9 dated 04/03/2007. I was a little bit surprised with the huge gap between the current 3.3.6 in my SPA 2102 and the 5.1.9 posted on Linksys website as I bought my SPA 2102 a month ago. Nevertheless, I tried to update the firmware I provide the IP address for my SPA (the same one I use to gain access to the setting webpage). However I received a message “upgrade fail: No response from SPA”.
I have a feeling that my SPA is a SPA 2100 disguised in SPA 2102. When I went to SIPURA website, I found that the latest firmware for SPA 2100 is 3.3.6. The way I understand it is the SPA 2100 is phasing out and replaced by SPA 2102. I will be concerned that I will have a sort of a phased out device.
I called Linksys technical support and they were slightly above useless. The guy told me to contact my VoIP provider to upgrade the firmware. I told him I have no VoIP provider as the ATA is unlocked. He put me on hold for long time until the call got disconnected. Usually I don’t count on telephone technical support. Anyhow this is not the issue.
Here are my questions:
1)      Did I miss something that prevented the upgrade of SPA 2102 to the 5.1.9 firmware? What settings I should look for to allow the firmware upgrade?
2)      Should I upgrade my SPA 2102 to the 5.1.9 or I am considered part of the SPA 2100 family rather than the SPA 2102?
3)      If I am actually an SPA 2100 in a SPA 2102 box, will I damage my hardware or make it functionless if I upgrade to 5.1.9?

Krishna, this worked for me. I just connected my computer directly to the LAN/Ethernet port of the SPA-2102 and run the firmware upgrade executable file. I initially had the same problem since my computer was connected to the main router.

SPA112 firmware upgrade from 1.0.1 to 1.2.1 kills the SPA

I took a brand-new, unconfigured SPA112 out of the box, plugged it into DHCP-enabled network, noted it was running v1.0.1 firmware and attempted a firmware upgrade to 1.2.1 via the web management utility.
After reporting a successful upgrade there was no further response from the SPA112 to HTTP requests, neither was there any response to pings. ARP requests are responded to successfully. The IVR works (as well as the IVR ever works) until I selected to perform a factory reboot at which point the IVR stopped responding as well. Holding the reset button for 20sec does nothing useful. It's dead, Jim.
I've had this experience on another SPA112 as well under similar circumstances although there is nothing in the Release Notes for v1.2.1 to say that such an upgrade does not work.
My questions:
1)Is there any way of recovering these devices or do I need to send them back to Cisco?
2) How am I supposed to perform such a firmware upgrade?

Hi Matthew,
I tried upgrading the firmware upgrade from v1.0.1 to v 1.2.1 and I had the same problem. The device just stopped responding. I tried that in a lab and I figured out what exactly to do when you get in to a problem like that. So lets start off once again.
Snce SPA112 must get an IP first through a DHCP on WAN port. Connect the SPA 112 device according to the instructins told in this article till the step 3.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2775
Once you access the web GUI of SPA112 follow the contents of the following article and upgrade the firmware
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2676
In your case I believe the window got stucked at the point when it says "The upgrade is successful" and then there was no further response to HTTP requests.
Restart the device and see if it works or not. If it does not then log in to the router web GUI and navigate to the ARP table and see what are the VLAN assigned to the IP address.
NOTE: Both the router and SPA should be in the same VLAN. This way only the device will respond to the HTTP requests. If they are in a different VLAN's, navigate to the VLAN and disable the LAN memberships. For example there are two VLAN ID 1 and 100. Disable the LAN ports for the ID 100 and only enable it for 1.
Navigate to the ARP table again and refresh it. Both the IP addresses should be in the same VLAN. If yes. Access the SPA112 with an IP address assigned to it again and navigate to Administration > Firmware Upgrade. You will see the firmware of the device has been upgraded.
(optional) Upgrade the firmware again. This time, it will go through and the device will restart.
Let me know if you still need any help.

SPA-122 issues

Well what can I say ? we purchased a few 122's for testing & product evalation and with the latest firmware SPA1xx_1.1.0_011.bin about a week after flashing it, there is now static sounds and buzzing coming from spa-122 ata, once I swapped out the spa-122 for a good old pap2t or my 2102 units works like a charm sounds great and no issues period, Has anyone seen or heard of an issues reguarding dialtone static/buzzing sounds?
Thanks

FYI, just got today another inacceptable response from Cisco, honestly I'm very frustrated with this new SPA122 that has been release to public without proper QA, that replacement of the SPA2102 should NOT has been release to public, I have a OPEN CASE since September 2012 > 9 months open ticket, troubleshooting hell with them, and they can't even offer me a replacement, upgrade to working product, offer alternative... Warranty is about to expire, then I'll be stuck with a broken, untested and useless device. What are our rights?!? I may sound very ULTRA frustrated, well I AM. Cisco customer service suck with VOIP product. I've been in network engineering for > 22 years, never experience that low quality support with Cisco and other vendors... I can't even escalate the issue to upper, they are just not cooperative. Not only EVERY owner of an SPA122 are having unstable issues, well too bad for us for purchasing that item, we are alone without support and endless efforts on reseting the bad not working devices...
Patrick Born, can you do something for me (us), do you think it's acceptable that kind of services?
Response of today: That's quality and service...
----- Message d'origine -----
De : Alex xxxxxx [mailto:[email protected]]
Envoyé : Thursday, April 25, 2013 05:26 PM Eastern Standard Time
À : me
Objet : Re: spa122 - High pitch noise with dial tone when phone is off hook
Greetings,
The following is a case status update courtesy notice.
The issue you reported remains open with Engineering & Development teams.
This issue may be addressed in a forthcoming Maintenance Release firmware,
however there is no ETA for this release. We will continue to monitor
Engineering & Development team progress and notify you as soon as any
updated information becomes available. Please let us know if you have any
questions.
Kind regards,

**SPA2102 FIRMWARE UPGRADE PROBLEM WITH 5.2.12

I'm having problems loading firmware 5.2.12 onto my SP2102-R ATA. I have my laptop PC running Windows 7 directly with an ethernet cable from my laptop to the ethernet connection on the back of the SPA2102. I run the .bin file and In order to get the software to the upgrade stage I have to enter ****, 73738 1# to move to the next stage. I have now been waiting for 1/2 hour waiting for firmware download request from SPA. IT DOESN'T GET PASS THIS STAGE.......CAN SOMEONE PLEASE TELL WHAT I'M DOING WRONG OR WHAT I NEED TO DO DIFFERENT?
Thanks......

Based on my experience with the SPA2102-NA, it is not necessary to do a factory reset (*73738) in order to perform a firmware upgrade/downgrade.
However, now that you have done so, any and all previous user settings will have been reset to the original factory settings (including user set passwords - assuming your ATA is an un-locked SPA2102-NA).
If you think the firmware 5.2.12 is faulty, then repeat the upgrade/downgrade process by downgrading back to an earlier version:
http://www.cisco.com/cisco/software/release.html?mdfid=282414111&softwareid=282463187&release=5.2.12&relind=AVAILABLE&rellifecycle=&reltype=latest
If you are still having problems, see if this tutorial will reveal any procedural issues:
http://blog.cqvoip.net/2009/12/linksys-cisco-spa2102-updating-firmware.html
Regards,
Jeff - cqvoip.net

SPA 122 with Polycom Equipment

I have a number of these devices, SPA 122's, set up at various customer sites with Polycom analog conference units running on a hosted telephony platform. They are all running the latest firmware. They all work great except for one problem.
A standard functionality of Polycom equipment is the ability to intercom other phones on the PBX using (* + 1 + Extension #). However, the problem that I am running into is that the IRV default access is also done by selecting (*) from the analog device. Is there a setting that I can change that would allow me to avoid this conflict? I understand I may loose the ability to configure the ATA using the IVR and will neeed to use the web management. This is fine.
Can anyone provide assistance with this?

Try the following.
Update the 'dial plan' (line tab) and the 'feature dial services codes' (regional tab).
In the dial plan, remove the *xx and put in *1xx. if you plan to dial *1 and 2 or more digits afterward.
In the feature dial services codes, put in the same *1xx.
Remove the default settings for Secure call in the Vertical Service Activation Codes, since those * codes start with *1.

SPA 122 ATAs not registering

We provision our SPA 122 ATAs via a provisioning server. We have been using this method successfully to register our ATAs with our voice server. For the past two days we have been unable to register any 122 ATAs. The ATAs are pulling the configuration, as well as the upgrade file (spa122-1-2-1-004), however they are not registering. When we use the same method for the old SPA 2102 ATAs, the configuration and the upgrade file are downloaded and the ATA registers. Should also note that the SPA 122 is also receiving an IP address and we can browse the internet through the device. We would appreciate any advice you can give.
Regards,
Nikolas Rock

We need to look at the debug log to see if the phone is sending out any registration messages.
https://supportforums.cisco.com/docs/DOC-9862 for info on setting up debug log.
If it's not sending out messages, we need to see the configuration. Thanks.

PETITION: This is what I would like to see in a new firmware upgrade for the MTP ZEN TO

FIXES:
-Ensures correct playback on the player of Zencast audio content that has been transferred using Zencast organiser. Remaining time is displayed correctly, and rewind / fast-forward functions can be used
- Allows users to transfer tracks between folders on the player when using a program such as Creative Mediasource [THIS IS NEEDED FOR ALL MTP PLAYERS]
- Allows charging via USB when the player is not being used by a program or is low on battery [THIS FEATURE SEEMS TO HAVE BEEN REMOVED BY MTP UPGRADE]
ENHANCEMENTS / ADDITIONAL FEAUTRES [I HAVE LISTED THESE BY MY PERSONAL ORDER OF PREFERENCE]:
) Allows the playback of Audible content types ,2,3,4 on the player, via a plug-in in Audible Manager
2) Adds bookmarking feature to the player
3) Adds SmartVolume EQ feature to the player
4) Adds DJ menu to the player
5) Allows user to partition a section of the player for data transfer
6) Allows user to synchronise tasks from Outlook to the player
7) Allows TXT files/ Ebooks to be stored/ viewed on the player
8) Adds BassBoost EQ feature to the player
PLEASE SIGN THIS PETITION TO URGE CREATIVE TO INTRODUCE AT LEAST SOME OF THESE FIXES / FEATURES IN A FIRMWARE UPGRADE FOR THE MTP ZEN TOUCH - also please feel free to add other suggestions that would improve the functionality of the Zen Touch
Message Edited by joshua32 on <SPAN class=date_text>05-30-2006 <SPAN class=time_text>:7 PM
Message Edited by joshua32 on 05-30-2006 :8 PM

all of these would be awesome, as would lyrics support, I REALLY want that

Firmware upgrade crippled cp1025nw

LaserJet CP1025nw color: was working flawlessly
received email from HP 4/3/2012, recommending firmware upgrade to v 20120130.
ran upgrade 4/3/2012 from iMac, OS10.6.8.
got error: 'update failed'
print queue says 'printing', cp1025nw doesn't respond.
printer lights: orange triangle enclosed exclamation mark plus green semicircle
This means: fatal error, per the user manual.
manual instructs to turn off, unplug, plug-in, turn on. I did this several times.
printer lights still indicate: fatal error.
HP utility says: device status: unknown, service ID: unknown, FW version: unknown, driver version 2.0.20110727
                  tried to print configuration page: got error 'cannot establish two-way communication with the device'
                  printer and computer are connected with USB cable, (this cable / port communicates without issue to Epson inkjet printer)
Tried printing from Dell laptop: Latitude E6410 with USB cable: Windows XP professional, 2002, service pack 3.
                  has routinely printed from this computer previously.
error message in printer queue: 'error - printing',
Dell said 'found new hardware' tried to install with HP cd-rom
                  error message said 'the hardware was not installed because the wizard cannot find the necessary software'
ran the HP print diagnostic utility HPPDU.exe file from the Dell with USB cable: 'Everything checks out okay with your printer'
print test page: no response from the cp1025nw
What should I try next?

Since my last post I’ve retried the same troubleshooting described before, this time just from the PC. The result is still the same. Lights on the cp1025nw indicate “fatal error”.
Does anyone know how to put this printer into ‘bootcode’ mode? I’ve read about this in some other posts about HP firmware updates trashing printers.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
and
http://www.fixyourownprinter.com/forums/laser/63535
Is there some combination of button presses that sends the printer into bootcode so it is ready to accept the firmware?
HP: How do you start up these printers when they are just manufactured to load the firmware?

HDMI output not working since firmware upgrade

I would appreciate troubleshooting tips for getting the HDMI output to work. I just tried it recently for the first time in a long while, approximately 4 weeks after doing the firmware update to 2.2. When I did it before, plugging in the HDMI cable would automatically start output to my HD TV. Now that is no longer the case. Changing the HDMI output from "Auto" to "720p" does not make a difference either.
Otherwise, everything works well and I've been satisfied with my Creative 7 to date. I have installed several apps so it could be that there is a conflict and nothing related to the firmware upgrade.
Any troubleshooting suggestions would be appreciated.

Well I've received my refurbished device for about a week now. The HDMI still doesn't work either with Zii Video or a 3rd party app MoboPlayer. ?I am tempted to reinstall the firmware upgrade again. Is it ok to try this or is it only a one time attempt?
Perhaps this should be a separate thread but are any of the "Phone 2 SD" apps compatible with the Ziio 7? Whenever I use the "Move to SD card" option, there is still no program moved to the external SD card. ?I have a Ziio 7 with 6 GB of memory as well as a 6GB micro SD card. ?My memory settings are:
- SD Card: total space - 5.43GB; Available space - 5.43GB
- Device media storage: Total space - 2.48GB; Available Space - 2.3 GB
- System storage: Total Space - .97 GB; Available space - .59GB
In Settings>Applications>Manage Applications, the "On SD Card" tab lists several programs lists several apps but none of them are actually on the external SD card.

Sky Router firmware upgraded - can no longer login with credentials

I usually have no problems accessing my sky router (white Sky Hub with ADSL) via the page 192.168.0.1 however I tried to login the other day and was greeted with an updated looking summary screen - all very nice I thought, let's go and explore! However when I put in the usual details - username: admin, password: sky I get prompted to input my details again which is very odd. Now I know that I am the only one who accesses the router in this way as my flatmate has never logged in and probably never will so I can only assume the firmware upgrade has caused the password/username to change. I logged in the other week and the password is saved in my browser so I am sure I am not making any mistake here. I have tried in chrome and IE just in case but I have the same issue in both. Has the new firmware brought a new default password? I cannot find any reference to this anywhere on this site so it seems unlikely. I would rather not reset my router to default settings as I have devices with static IP addresses and port forwarding setup that will take me some time to reconfigure. I don't think there is any feature to backup the config unless you are actually logged in to the router but would love to be worng about this. I am guessing I will have to bite the bullet and reset to factory defaults but would welcome any help or suggestions if possible?

After review the events of the morning.....
I normally keep my routers in the basement where my eth jacks all hub. High on a shelf, I got reasonable coverage on 2.4Ghz even on the second floor. I went to this router for the Dual mode, but found the 5Ghz didn't make it sufficiently well to the second floor. So it was moved to the first floor, on a counter. That morning the router started acting up a bit, not bringing an iphone online. It was looked at - and a couple of post cards that had been placed on top, removed. Air flow was not blocked around the sides in any way - just a few pieces of card stock on top to interfere with convection off the top.
1. There is no way to look at temperature - maybe the device doesn't even know its own temp.
2. There is no fan that I can discern. Clearly, creating a device that is designed to sit on a flat surface in a home environment ought to take into consideration "normal impediments to air flow". Temp controlled fans is simple, well proven tech.
3. This design is small, has TWO radios, sits horizonal (thus is going to have lousy convection) - seems to me an engineer ought to have given more thought to not only providing the user with easy to obtain data (temp), alternative methods (fan/vertical mounting) and/or self-protection (to hot, I'm shutting down rather than corrupt my database).
Having spent millions on Cisco gear in my career, I would have hoped that Cisco+Linksys would have a little more Cisco and a little less Linksys.
me

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

Firmware upgrade correct steps?

We are carrying out a firmware upgrade on our 9509’s from 3.3(1c) to 5.2(2) and I want to know if the steps below are correct?
Check hosts for paths to both Fabric's.
Take a backup of the config for all the switches.
On Fabric A upgrade switch 1 to 4.1(x)
Upgrade switch 2 in Fabric A to 4.1(x)
On Fabric A upgrade switch 1 to 5.0(x)
Upgrade switch 2 in Fabric A to 5.0(x)
On Fabric A upgrade switch 1 to 5.2(2)
Upgrade switch 2 in Fabric A to 5.2(2)
When happy, then do the same for Fabric B for the other switches.
Thanks

looks good, just follow the release notes to go to the correct intermediate code level so that upgrade is non disruptive

SPA 122 Firmware upgrade

Similar Messages

Maybe you are looking for