SPA 2100 Problem with Belkin Router

My setup is motorola cable modem>>>>SPA2100>>>>Belkin Wireless Router. My phone works fine but i cant get the internet to work wirelessly through my router. when i connect the 2100 to the router through one of the 4 hardwired computer ports on the belkin, the internet works fine for the other computers hard wired to the belkin router. But i cant access the router homepage to setup the wireless settings. Also, there is nothing plugged into the modem port in my router. Any help? Thank you

The SPA-2100 is a router and ATA (analog telephone adapter) in one. You need to decide which will act as the main router whether it’s the SPA-2100 or the Belkin wireless router. Better go to linksys.com/kb and search for cascading router. There should be an article which will describe how to connect the two routers together.

Similar Messages

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Problem with rg60se router

I have problem with this router, when I connect to the internet wirelessly it works fine but when I try to connect my pc to router via cable I can't connect to the internet. maybe someone can help with this problem.

>> Posting Guide <<

Problem with Advanced Routing in WRT320N

Hi, everybody.
First of all, sorry for my poor English.
I've a problem with Advanced Routing in router. My provider using routing and it looks like that:
route add -p 172.16.2.0 mask 255.255.255.0 10.1.0.2
route add -p 172.16.5.0 mask 255.255.255.0 10.1.0.2
route add -p 10.0.0.0 mask 255.0.0.0 10.1.0.2
Everything is working well in XP (or other OS), but then I try to setup a Routing in router:
1.
2.
I'm realy tired to flashing and reflashing between 1.00.02 and 1.00.03, changing browsers, and hard reseting.
Anybody'll gimme a shot trick to my tired brains?
Solved!
Go to Solution.

1. Yes.
2. netstat:
C:\Users\dan>netstat -rn
===========================================================================
Список интерфейсов
31...........................inet
12...00 40 f4 76 95 bd ......VIA Rhine III Fast Ethernet адаптер
11...00 1d 92 2c 23 02 ......Realtek RTL8168B/8111B Family PCI-E Gigabit Ethern
et NIC (NDIS 6.20)
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #2
21...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #2
13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
14...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4
19...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #3
18...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP
16...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #3
20...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #4
===========================================================================
IPv4 таблица маршрута
===========================================================================
Активные маршруты:
Сетевой адрес Маска сети Адрес шлюза Интерфейс Метрика
0.0.0.0 0.0.0.0 10.1.0.2 10.1.3.42 4501
0.0.0.0 0.0.0.0 On-link 91.203.178.26 21
10.0.0.0 255.0.0.0 10.1.0.2 10.1.3.42 4246
10.1.0.0 255.255.0.0 On-link 10.1.3.42 4501
10.1.3.42 255.255.255.255 On-link 10.1.3.42 4501
10.1.255.255 255.255.255.255 On-link 10.1.3.42 4501
91.203.178.26 255.255.255.255 On-link 91.203.178.26 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
172.16.2.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
172.16.2.10 255.255.255.255 10.1.0.2 10.1.3.42 4246
172.16.5.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 10.1.3.42 4502
224.0.0.0 240.0.0.0 On-link 91.203.178.26 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 10.1.3.42 4501
255.255.255.255 255.255.255.255 On-link 91.203.178.26 276
===========================================================================
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
172.16.2.0 255.255.255.0 10.1.0.2 1
172.16.5.0 255.255.255.0 10.1.0.2 1
10.0.0.0 255.0.0.0 10.1.0.2 1
===========================================================================
IPv6 таблица маршрута
===========================================================================
Активные маршруты:
Метрика Сетевой адрес Шлюз
16 1125 ::/0 2002:c058:6301::c058:6301
11 276 ::/0 fe80::f88b:9485:52cd:caaf
1 306 ::1/128 On-link
13 58 2001::/32 On-link
13 306 2001:0:4137:9e50:2846:3ccb:a434:4de5/128
On-link
16 1025 2002::/16 On-link
16 281 2002:5bcb:b21a::5bcb:b21a/128
On-link
11 276 fe80::/64 On-link
13 306 fe80::/64 On-link
13 306 fe80::2846:3ccb:a434:4de5/128
On-link
11 276 fe80::b9aa:b87b:89ea:fcdd/128
On-link
1 306 ff00::/8 On-link
13 306 ff00::/8 On-link
11 276 ff00::/8 On-link
===========================================================================
Постоянные маршруты:
Отсутствует
C:\Users\dan>
2. ipconfig:
C:\Users\dan>ipconfig /all
Настройка протокола IP для Windows
Имя компьютера . . . . . . . . . : druh
Основной DNS-суффикс . . . . . . :
Тип узла. . . . . . . . . . . . . : Гибридный
IP-маршрутизация включена . . . . : Нет
WINS-прокси включен . . . . . . . : Нет
Порядок просмотра суффиксов DNS . : mannet.lan
Адаптер PPP inet:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : inet
Физический адрес. . . . . . . . . :
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv4-адрес. . . . . . . . . . . . : 91.203.178.26(Основной)
Маска подсети . . . . . . . . . . : 255.255.255.255
Основной шлюз. . . . . . . . . : 0.0.0.0
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Включен
Ethernet adapter lanHOME:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : VIA Rhine III Fast Ethernet адаптер
Физический адрес. . . . . . . . . : 00-40-F4-76-95-BD
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Ethernet adapter 1000LAN:
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Realtek RTL8168B/8111B Family PCI-E Gigab
it Ethernet NIC (NDIS 6.20)
Физический адрес. . . . . . . . . : 00-1D-92-2C-23-02
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Локальный IPv6-адрес канала . . . : fe80::b9aa:b87b:89ea:fcdd%11(Основной)
IPv4-адрес. . . . . . . . . . . . : 10.1.3.42(Основной)
Маска подсети . . . . . . . . . . : 255.255.0.0
Аренда получена. . . . . . . . . . : 17 октября 2009 г. 17:37:10
Срок аренды истекает. . . . . . . . . . : 18 октября 2009 г. 17:37:09
Основной шлюз. . . . . . . . . : fe80::f88b:9485:52cd:caaf%11
10.1.0.2
DHCP-сервер. . . . . . . . . . . : 172.16.2.2
IAID DHCPv6 . . . . . . . . . . . : 234888594
DUID клиента DHCPv6 . . . . . . . : 00-01-00-01-12-43-2B-71-00-1D-92-2C-23-02
DNS-серверы. . . . . . . . . . . : 172.16.2.2
Основной WINS-сервер. . . . . . . : 172.16.2.2
NetBios через TCP/IP. . . . . . . . : Включен
Туннельный адаптер Reusable Microsoft 6To4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Reusable ISATAP Interface {543B8BBE-84D2-471B-B8FB-F73600B4A8
2B}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети* 5:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2001:0:4137:9e50:2846:3ccb:a434:4de5(Осно
вной)
Локальный IPv6-адрес канала . . . : fe80::2846:3ccb:a434:4de5%13(Основной)
Основной шлюз. . . . . . . . . :
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер 6TO4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.mannet.lan:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.{AE6B314F-94BA-478F-8751-74DEB5AB1888}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети*:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2002:5bcb:b21a::5bcb:b21a(Основной)
Основной шлюз. . . . . . . . . : 2002:c058:6301::c058:6301
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер isatap.{8B513FFA-4355-406F-B999-1701EE42D5B9}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
3.
4. without privider's cable:
4. with provider's cable:

Trouble hooking up Wireless-G Camera with Belkin router

Do I need to use a Linksys router in order for me to access my Wireless-G camera from my work or travel computer? I need assistance getting the two to talk.
Please help, Thanks

No , there is no need to use the linksys router . it will work with belkin router also.
what is the model number of the linksys camera ?

Problem with Linksys Router Model WRT110 Not Assigning IPs With DHCP?

Hello,
I recently purchased this router (WRT110) to take the place of my old Belkin that was continually dropping connections (which was a real pain when trying to download stuff off the Internet).
However, I cannot get this router to assign IPs to wired or wireless computers. I spent around 2 hours talking to Linksys support technicians (two total) before they finally told me the router was defective.
So, I went back to the store and got an exchange. But, it's the same story with this router, the connections can't get past the "acquiring network address" stage in the connection process.
I would like to think that this has more to do with my ISP than the router, but if I set up a static IP on the wired computer I can connect to the Internet and the router through its default gateway. Setting up a static IP on the wireless computer doesn't seem to work, however. If the ISP was a problem, wouldn't the router not detect the Internet connection at all?
DHCP is definitely enabled on the router also.
My ISP is a small town owned company. I have a wireless broadband connection, which works similarly to satellite, only the connection is broadcast via a tower and is received with an outside antenna.
I still need to contact them about this, but I figured it could hurt to ask here and see some of your suggestions.
Thank you!
~RJG

UPDATE: I contacted my ISP today and the technician I spoke with said he didn't know of any problems any routers would have with their wireless broadband. I tend to agree with him, as I've configured two routers previously using my connection and I've never had any difficulty until now. He suggested changing the ethernet cable and releasing/renewing my IP address, both of which I did but I continued to have the same issues.
But, after doing some more research I found some settings that actually allowed my wireless computer to connect. There was a post in these forums referring to modifying the MTU, changing it from Auto to Manual and changing the value to 1458 actually seemed to work, as well as strengthening the connection by changing the beacon interval. Anyway, I can connect wirelessly now.
Also, I connected my Linux computer (Ubuntu 8.04 Hardy Heron) to the router and was able to connect instantly, no problems whatsoever. So, out of my three computers, two are connecting, but my wired Windows computer is still having issues. However, if I set a static IP for that computer, I can connect fine.
I'm thinking maybe there is something wrong with the NIC card in that computer, but how would one test something like that?
It doesn't make sense to me, I would really appreciate any input. Thank you!

SPA 112 PROBLEM WITH SIMULTANEOUS CALLS

HELLO,I HAVE A PROBLEM IN THE ATA SPA 112 ABOUT SIMLUTANEOUS CALLS. The ata has 2 lines,when a call falls in line 1, the call on line 2 falls at the same time...and when I'm on line 1 and I recevive a call on line 2 the call in line 1 becomes mute and then drops.I didn' have these problems with the old pap2t .
Can you please help me to solve this problem ? Do I have to change something in the configuration ? Thanks,Mario

Hi,
thanks for responding.
I had found out about the timing problem in the meantime, but did not find a way to mark this thread as solved.
There are two timing values: one is the PSTN answer delay, and the other one the PSTN ring timeout.
It seems that ring timeout should be longer than ring time + ring pause. As long as this conndition is not met. the dial plan is not even considered

Connection problems with WRT54G Router PLEASE HELP!!!!

Hello all,
Im having a huge issue and im hoping that someone can help me. Awhile ago i changed what i believe to be my router settings using 192.168.1.1 and i believe i added WEP secuirty. I changed my password i know that much. Anyway my problem is this - When i try connecting a router to my computer, i cannot access the internet OR the 192.168.1.1 setup. I just get a yellow caution sign on my wireless settings (running Windows 7), but when i connect my cable modem (Comcast) to my computer, i can access the internet. I have reset both the router and my cable modem MANY times (hard resets) and STILL cannot get the setup page for the router. I have TWO WRT54G rourters and BOTH do the same thing when connected to my desktop , yet BOTH work fine on an old machine running XP, so it is something i did with this computer. Can someone please help me solve this issue? any hlep would be appreciated as i am stumped and do not know how to fix this and cannot use WI-FI or my Xbox 360 until i can fix this..Thanks.

Check the IP address of your computer and see if it's in range with the router's IP.
To learn how to do so, click here.

Problems with Wireless Router and Adapter

I tried posting this in the wireless adapter forum but nobody responded :-(
I'm using a WRT54G Router btw, and the firmware is v2.02.7, Feb. 27, 2004.
Hi everyone,
I have a Linksys Wireless G Router and several computers that I try to connect with. One of them is a computer running Windows XP and using a Linksys Wireless USB B Adapter (WUSB11). Another is a laptop running Mandriva Linux using a Linksys Instant Wireless Network PC Card (WPC11). Another one is running Windows Vista and using a Linksys Wireless N card. I also have a laptop running Windows XP using a Linksys Wireless-G Notebook Adapter (WPC54G). I also have another PC running Windows XP and uses a Linksys Wireless USB Adapter WUSB54G. Finally, I have two macintosh laptops running OSX and with airport devices installed.
Anyway, I have problems with my internet connection frequently being interrupted and even sometimes I won't have a connection at all for hours. This occurs with my Linux laptop, the PC with the Wireless B Adapter, and the laptop using the Wireless G Notebook Adapter. In addition to this, the macintosh laptops have internet even more infrequently. However, I seem to never have a problem with the Windows Vista desktop or the Windows XP desktop that has the Wireless G adapter. I try repairing the connection and often it does not work. I have also tried resetting the router and the cable modem. I'm not sure what else I can do. I even bought a Wireless N router and had little success with that. We even went as far as moving the wireless router upstairs into our living room, thinking that the signal was somehow suffering from interference or that distance was a factor. Anyway, sorry for the long post but I could really use some help!
Thanks.

Hi… logon to wireless N router’s setup page, open I.E. an in the address bar type 192.168.1.1 it would ask for username and password, put "admin" as a paassword (default password) without any username...linksys setup pops up, click on on wireless tab and and try changing radio band to wide 40MHz, wide channel to 9 and wireless standard channel to 1 or 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270 MBps…also try upgrading latest firmware on router, check whether it makes any difference or not and let me know.

Connecting to Home WiFi with Belkin Router

Hi guys,
love my itouch, just cant get it to connect properly with my router. My settings confirm im connected ok (ive input my password as requested), but when i use safari or try to collect my emails im told my itouch can connect to the server. Do i need to manually input more settings (and if so, what are they....?) When i attach to other routers i have no such problems, straight into safari and straight into my emails....
At a loss, so any help geatfully received!!
Cheers

hello
i may have a solution for you.
Do you have any computers connected to the network?
if so, then what firewall software is installed?
I had the same problem, and it was very annoying. All i did was add every conceivable ip address that my router could give to my ipod into the 'safe ip's' section of my firewall software. It instantly started working.
Give it a try!

Loss of connection with Belkin router

I have been using a Belkin N450DB router with my Westell modem for over 2 months. Everything was fine until 4 days ago when my router lost connection. I have tried the self heal with the router and the troubleshooting with the modem. I currently have internet with just the modem hooked up but have lost connection 3-4 times this way over the past 4 days. I have no connection with the router connected now. It says wire unplugged. I was thinking it was the router but have found out another DSL customer in my town has the exact same issue and he has a different router. Did Verison reset some security programs that won't allow my router to connect or is Verison DSL having issues we are not aware of in Greenwood, DE? It is just strange that two residences are experiencing the same issues in different areas.

#1 What is the model of that Westell modem?
#2 When you said
Rockinghorserun wrote:
It says wire unplugged.
are you saying that the router says that or are you saying your OS (and Version - for example Windows XP) is saying that?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Problems with WRT350N Router

I have had a WRT350N router since they first came out and have had the same problems with it the entire time. I have 2 systems with static IP's, 1 wireless B (dhcp) 2 wireless G (DHCP), and 4 wired devices. (1 Gigabit, 1 10 Base, and 2 100 Base)
1. After the unit has been powered on for a while (a day or so) The DHCP server quits giving IP addresses. (DHCP server unreachable messages)
2. Unable to use the restore config feature. (file uploads and seems to apply yet no changes are actually made.)
3. QOS locks up router. If I try to set up QOS the router has to be reset to factory defaults.
I have kind-of just dealt with it, but the DHCP thing is really bothersome. I have to go in the room with all of my network equipment and power cycle the thing to get an internet connection, that raises the possibility that I will have to reset the other devices.

I am seriously reconsidering returning my WRT350N for another N-based router.   The current firmware is not stable.   I have had a WRT54G V1 and WRT54G V5 for years and never had a signel issue.    Just to make sure I didn't get a bad unit I returned for another so I know it isn't hardware related.
1) DDNS not updating. This has always worked on my WRT54G's without issue
2) XBOX 360 wouldn't stay connect to Live.   Changing MTU size seems to 1365 make more stable
3) Storage support works for a while and then stops or randomly freezes unit.
4) FTP changes require unit to be manually rebooted for changes to take effect.
Really hope a new firmware release is soon.  I love the features of the 350N but
it is not a very stable router at this point.   If DD-WRT releases a firmware that has the storage gui enabled might take a look there but at this point I am frustrated with the unit.
Message Edited by GAH1068 on 03-30-200707:02 AM
Message Edited by GAH1068 on 03-30-200707:02 AM

Problems With Linux Router

I have a RaspberryPi and I want to turn it into a router just for the hell of it. I've attempted this multiple times but always get stuck and say "screw it" since my roommates would bitch at me because they can't get on the internet. Now I live by myself and want to get it to work.
I've followed the Router page in the wiki but I only have internet access from the Pi itself. I had a few problems but I think I fixed them. My main problem now is that DHCP doesn't offer IP addresses. During bootup Arch tells me that it failed to start my private interface (eth0), while looking at the journal it says this because the interface is already up (don't know why) and it doesn't get an ip address. I would like to assign it a static address of 192.168.1.1 but I'm not sure how to do so.
If I set a static address for eth0 (my internal interface) and try to get an IP address from another computer it doesn't offer me one. If I set a static address on the other PC, I can ping the Pi from the PC and vice versa so I know that's good, but if I try to ping an external IP from the PC (such as Google's DNS server 8.8.8.8 which responds to pings) it gives me "destination host unreachable", yet I can ping it just fine from the Pi.
I'm using a Cisco E3200 router with Tomate by Shibby as a switch and WAP with the routing/DHCP/DNS features turned off. I don't believe that the E3200 is the problem.
Any suggestions on why this isn't working?
Last edited by brando56894 (2013-09-18 05:08:23)

Thanks for the info, but I need to get DHCP working since I'm going to have a few other devices on the network that won't have static address (phones, tablets, friend's devices, etc...).
Lone_Wolf wrote:Off-topic : Don't think OP's problem is due to the different architecture, but deciding such things is part of the moderators job.
I was going to say that too, but I didn't want to poke the bear. My problems aren't really architecture dependent, they're just general networking problems.
Last edited by brando56894 (2013-09-18 17:57:36)

Connection problem with EA3500 router

System consists of cable modem connected to EA3500 dual router and also have a Linksys range extender. Have several wireless devices including desktop PC, cell phones, and tablets that all connect to wireless network without any problem. Have password set up on system. Having a problem with one Acer laptop - when I view my wireless connections I can see HOME and HOME-EXT and it will connect fine with the EXT (range extender) signal but will not connect with the base router that is shown as HOME even though the home connection shows a stronger signal that the ext link. Have checked to make sure that router password is correct - laptop will sometimes connect to HOME for a few seconds and then display "limited connection"
No problems with wireless connections with any other devices. Have rebooted everything in the system with no luck.
Have also tried deleting HOME connection and then reconnecting it.
Any suggestions?
Thanks for any help that anyone may offer.

On the laptop did you try to forget the HOME network and reconnect?
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

TRYING TO SET UP I PAD TO HP AIR PRINTER HAD PROBLEMS WITH ,TALKTALK ROUTER, ASKED AT PC WORLD ADVISED TO BY AIRPORT EXPRESS BUT STILL NO LUCK WILL NOT COMPLETE SET UP. THOUGHT THIS WOULD REPLACE THE ROUTER, I THINK I MAY HAVE BEEN WRONGLY ADVISED

Having problems with air printer to i pad, problem seems to lie with talktalk router, hp solutions managed to get i mac to air printer working but not i pad, adivsed to buy another router as talktalk is not compatiable with bonjour. Went to PC world apple department advised to by airport express. tried setting it up using but will not finalise. i was led to believe this would replace the talktalk router? i feel i have been sold the wrong thing. Any suggestions

This happened to me when I was setting up the wireless router for a friend. The issue is with the Westall modem. You need to go in and setup the "bridge" option on the westell modem. The link below gives directions or you can call bellsouth dsl support (this is how I learned about it).
http://help.bellsouth.net/bellsouth/asp/contentview.asp?isbrowse=true&sprt_cid=3f993409%2Ddff7%2D422...
Good luck
Solution:
Method 1 - Hard Reset
Restore the modem to default settings by pressing the Reset button on the back of the modem and holding it for 3 seconds. (Bridged mode is the default setting for the Westell).
After the modem regains sync, it is in Bridged mode. Do not attempt to surf into the modem as surfing into the modem will enable the Easy Login page and convert the modem from bridged mode to a PPP mode.
Method 2 – Bridged Mode
Access the Westell interface using http://192.168.1.254 or http://launchmodem.
Click on the Broadband DSL Line button.
Click on the Protocols button
Select the radio button to the left of Option 2 (Bridge)
Click the save button. Once the modem has restarted it is in bridge mode.
ALL STEPS COMPLETE

SPA 2100 Problem with Belkin Router

Similar Messages

Maybe you are looking for