SPA 525 (7.1.5a) Freezing
Hello all,
I work for a voIP provider supporting Polycom and Cisco phones. I am having an issue with Cisco SPA 525's in one of our enviroments and can't seem to figure out the problem. Essentially the phone will freeze randomly during calls and rquire a hard reboot to bring the phone back. When the phone freezes the display goes blank and the LEDs turn amber and it just sits there till you power cycle. The phone is using a Bluetooth headset.
Heres what I am about to try. Disconnect the bluetooth headset and upgrade the phones to 7.5.3. The interesting part is that this effects all SPA 525s in the enviroment but not the 504s. We swapped out some of the 525's with 504s and seems to have fixed the problem. The only difference between the two is the 525 use bluetooth.
Any thoughts? Any know issues with the 525s? I've looked at the 525g2 which has some bluetooth enhancements so I am wondering if that would be worth a try to swap them. I think the issue may be related to the blue tooth headset but I dont have any way to debug. I can syslog but I am unable to capture any errors when the problem happens. We are about to lose this client because of these phones so I am little desperate at this point. Any help is appreciated.
Thanks guys.
-Michael Martinez (A+/CCNA)
7.1.5a is very old sw.
You should upgrade to the latest version and the bluetooth sw should be at .34 version. You'll be able to see this in the info tab of the web UI.
Similar Messages
-
SPA 512 phones locking up/freezing when another call comes in.
It doesn't happen every time but several users are reporting phone freezing when another call comes in while they are on the phone. We have two UC560's under one roof doing this, one using 3com switches and one using Cisco switches, the two (UC560) networks are completely segregated. We have swapped out some phones thinking it might be a bad phone or two but the problem is still ongoing. Phones are on the most current firmware that pulls automatically when they are first plugged in.
Hello James,
You have to upload the firmware via the drag and drop method in CCA. In the Topology View, use the mouse to drag the phone load (.zip or .bin) file from your PC and drop it onto the UC500 icon. For Cisco SPA500 Series and 300 Series phones, you must extract the .bin file from the archive before dragging and dropping it onto the UC. Make sure you can ping 10.1.10.2 which is the TFTP interface of the UC.
Thanks,
-john -
SPA 50X and XML Application URL
Hello Guys,
I made a XML application which runs just fine on a SPA 525 but not on the SPA 502 (have not tested on other 50X phones).
The issue is that the URL I return in a MenuItem for the tag <url> gets cut by the phone when it request it.
The Flow is
Phone Requests
http://192.168.9.207/MyPhoneBridge/myphonebridge.aspx?extension=102&model=SPA123
and gets in return
<?xml version="1.0" encoding="UTF-8"?>
<CiscoIPPhoneMenu><Title>Bla BLa</Title>
<Prompt>Bla Bla Bla</Prompt><MenuItem>
<Name>Name1</Name>
<URL>http://192.168.9.207:80/MyPhoneBridge/myphonebridge.aspx?extension=102&model=SPA123&extensionstatus=yes</URL>
</MenuItem>
<MenuItem>
<Name>Name1</Name>
<URL>http://192.168.9.207:80/MyPhoneBridge/myphonebridge.aspx?extension=102&model=SPA123&presenceinfo=yes</URL>
</MenuItem>
<MenuItem>
<Name>Name3</Name>
<URL>http://192.168.9.207:80/MyPhoneBridge/myphonebridge.aspx?extension=102&model=SPA123&fwdrules=yes</URL>
</MenuItem>
<SoftKeyItem><Name>Select</Name><URL>SoftKey:Select</URL><Position>1</Position></SoftKeyItem><SoftKeyItem><Name>Exit</Name><URL>Key:Services</URL><Position>2</Position></SoftKeyItem></CiscoIPPhoneMenu>
Which ever entry i select now, i only see the request from the phone for http://192.168.9.207:80/MyPhoneBridge/myphonebridge.aspx?extension=102
All Arguments are cut. The this play then writes
XML format error or invalid applicationNote that there is XML Phone Applications space dedicated to XML Phone Applications questions.
But it seems to be rather obvious issue. '&' is not allowed char in URL (it is generic rule, nothing special for SPA502). Such special char needs to be escaped accordingly. So replace all occurrences of '&' by '&'. It should help.
By the way, it is mentioned in documentation.
Rate useful advices. It will help others to search solutions. -
I have new setup with UC540 with 7 SPA 525 2G phones. 4 out of 7 phones register fine and work.
3 don´t register. Phone display just gives "unregistered" the phones seem all identical.
Has anyone had intermittent issues like this with the SPA 525 2G ?Hi Kristjan,
Make sure the MAC you put in is right on the entries in the system.
Also make sure they are listed as SPA-525G2 in either CLI or through CCA.
Both of those will also produce those errors.
Cheers,
David. -
Just wondering if anyone has had any experience viewing non Cisco cameras on a SPA525g. I have a customer that is purchasing a UC560 and some Axis cameras and would like to view a camera on his desk phone. I have done this before with a Cisco PVC2300 camera but I have never with a non Cisco camera. Any advise would be appreciated.
Hi Shaun,
Axis will use either the H.264, MJPEG as their Codec/Containers for the video streams, this will be to ensure they are ONVIF compliant, however the Cisco SPA phone isn't designed for that
It is highly unlikely it would work as the SPA-525 series phone will only know how to talk to the PVC cameras and will be able to negotiate the transport stream.
You would be better of having the client connect to them using their iPAD/iPhone/ANDROID tablet which would be more reliable and secure anyway.
Cheers,
David Trad. -
Viewing My IP Cameras on my iPhoe
I did have 4 D-Link Cameras with assigned names and port forwarding set up on my router. I could be out of town, type in farrar.remotecam.com:1030, and see the video to keep an eye on the house.
I changed over to Trendnet TV-IP422w cameras and set those up the same way. When I type in my URL of any of the 4 cameras, I see the camera controls, can make changes to the setting, etc. BUT cannot see any video. Trendnet says I need to download software to view video? Apparently, my stream on these is different. I have the option of MJPEG or M4JPEG-neither work.
What can I load on my iPhone to view my video cameras remotely? I have no problem viewing them from a laptop.
Thanks!Hi Shaun,
Axis will use either the H.264, MJPEG as their Codec/Containers for the video streams, this will be to ensure they are ONVIF compliant, however the Cisco SPA phone isn't designed for that
It is highly unlikely it would work as the SPA-525 series phone will only know how to talk to the PVC cameras and will be able to negotiate the transport stream.
You would be better of having the client connect to them using their iPAD/iPhone/ANDROID tablet which would be more reliable and secure anyway.
Cheers,
David Trad. -
Keyboard and trackpad freeze and randomly become unresponsive
I've got a MacBook Pro (15-inch Early 2011) running Mac OS X 10.8.2.
Since a few weeks ago at random intervals my keyboard and trackpad become permanently unresponsive. I don't recall any particular cause or change that would have caused this to start happening.
What happens is that the trackpad and keyboard will stop functioning completely. The computer, display etc. would continue to function properly:
The clock keeps ticking.
If music were playing it would continue etc.
Internet connectivity (via an ethernet cable or WiFi) continues to work as well (a download will continue, and even resume if I disconnect and reconnect the ethernet cable).
Presssing the power button will bring up the shutdown dialog as usual (but I can't use it, obviously, so a forced shutdown needs to be performed instead by holding down the power button longer).
.. but the keyboard and trackpad are rendered inoperable, as if they were no longer connected.
I've made no progress in finding out what could possibly be the cause of this. A few observations:
It has never happened while not using the keyboard (e.g. watch a DVD with TV series for a few hours, and afterwards the keyboard would always be fine).
It always happens while actively typing (e.g. while in the middle of replying to an e-mail).
It is not a temporary problem, the keyboard and trackpad will not become responsive again after some time (the computer isn't particulary occupied with calculating something big, no beachball and no busy mechanical noises).
It does not happen progessively. It works fine and snappy one second, and I'm touching a dead keyboard a split second later.
I tried connecting a USB keyboard but that doesn't seem to work either (I'm mentioning this since some of the linked threads below close with that as a solution).
Possibly related (although I haven't found anything in these threads):
Keyboard causes trackpad to not function properly
Keyboard and trackpack freeze
Keyboard and Trackpad Unresponsive
MacBook Pro Keyboard & TrackPad freeze! Totally Unresponsive!
MacBook Pro inbuilt Keyboard and Trackpad freeze when not connected to bluetooth devices?
I've crawled through some log files in /var/log (via the shell and through Console.app) and found a couple things that may be relevant, although they seem unrelated. Etiher way, I was surprised by what I found. All sorts of errors with regards to Bluetooth and USB stuff. I'm not aware of using either. I haven't used bluetooth in years and though I sometimes charge an iPod by USB, I haven't had any problems with that, and this keyboard/trackpad freeze has also happened on sessions where I started the laptop and never even touch the USB ports in the time leading up to the freeze.
Sample log from when it happened. It last happened at 21:04:xx:
Jan 14 20:18:39 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x141-192.168.178.13:0!
Jan 14 20:23:49 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
Jan 14 20:26:14 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x142-192.168.178.13:0!
Jan 14 20:29:11 KrinkleMac.local WindowServer[80]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
Jan 14 20:29:16 KrinkleMac.local lsboxd[2155]: @AE relay 4755524c:4755524c
Jan 14 20:30:13 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
Jan 14 20:30:43 --- last message repeated 1 time ---
Jan 14 20:33:24 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x143-192.168.178.13:0!
Jan 14 20:41:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x144-192.168.178.13:0!
Jan 14 20:42:43 KrinkleMac.local mtmd[46]: Set snapshot time: 2013-01-14 20:42:45 +0100 (current time: 2013-01-14 20:42:43 +0100)
Jan 14 20:42:43 KrinkleMac kernel[0]: nspace-handler-set-snapshot-time: 1358192565
Jan 14 20:43:14 --- last message repeated 10 times ---
Jan 14 20:43:28 KrinkleMac.local AddressBookSourceSync[6580]: *** -[IADomainCache init]: IA domains cache is out of date.
Jan 14 20:45:12 KrinkleMac.local CalendarAgent[6449]: Unexpected EOF, returning last token as fallback
Jan 14 20:48:09 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x145-192.168.178.13:0!
Jan 14 20:55:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x146-192.168.178.13:0!
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:13 KrinkleMac.local blued[6615]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
Jan 14 21:01:14 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:39 KrinkleMac kernel[0]: USBF: 145183.427 AppleUSBHubPort[0xffffff803c3d2600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:01:39 KrinkleMac kernel[0]: USBF: 145183.722 IOUSBCompositeDriver[0xffffff803ae3be00](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:41 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:41 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:41 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:01:59 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:01:59 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:01:59 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:02 KrinkleMac kernel[0]: USBF: 145206.333 AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
Jan 14 21:02:02 KrinkleMac kernel[0]: USBF: 145206.634 AppleUSBHub[0xffffff80476a9000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:12 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:12 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:12 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:12 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:02:12 KrinkleMac kernel[0]: USBF: 145216.648 AppleUSBHubPort[0xffffff803a385000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:12 KrinkleMac kernel[0]: USBF: 145216.649 AppleUSBHubPort[0xffffff8038a3ba00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:13 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:13 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:13 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:13 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:02:13 KrinkleMac kernel[0]: E:[AppleBluetoothHCIControllerUSBTransport]WARNING !!!! [AppleBluetoothHCIControllerUSBTransport::DeviceRequestCompleteHandler] error 0xe00002ed (kIOReturnNotResponding)
Jan 14 21:02:13 KrinkleMac kernel[0]: USBF: 145217.575 AppleUSBHubPort[0xffffff80398bf400]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF: 145219.525 AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF: 145219.525 AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF: 145219.525 AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF: 145219.529 AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF: 145219.530 AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:15 KrinkleMac kernel[0]: USBF: 145219.530 AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF: 145221.123 AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF: 145221.123 AppleUSBHubPort[0xffffff8039e80800]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:16 KrinkleMac kernel[0]: USBF: 145221.125 AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:22 KrinkleMac kernel[0]: USBF: 145226.307 AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:02:22 KrinkleMac kernel[0]: USBF: 145226.373 AppleUSBHubPort[0xffffff8038c87e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF: 145228.196 AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF: 145228.196 USBF: 145228.196 AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing getting port status (2)AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing getting port status (2)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF: 145228.200 AppleUSBHubPort[0xffffff803a261e00]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF: 145228.200 AppleUSBHubPort[0xffffff803a123000]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe000404f while doing get status (first in port status change)
Jan 14 21:02:23 KrinkleMac kernel[0]: USBF: 145228.200 AppleUSBHubPort[0xffffff8039fd0c00]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002ed while doing get status (first in port status change)
Jan 14 21:02:25 KrinkleMac kernel[0]: USBF: 145229.331 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:02:25 KrinkleMac kernel[0]: USBF: 145229.766 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:02:26 KrinkleMac kernel[0]: USBF: 145230.963 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:02:26 KrinkleMac kernel[0]: USBF: 145230.963 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:28 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:28 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:28 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:38 KrinkleMac kernel[0]: USBF: 145242.843 AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, retrying
Jan 14 21:02:38 KrinkleMac kernel[0]: USBF: 145243.145 AppleUSBHub[0xffffff803c64b000]::ConfigureHub(hub @ 0xfa110000) No config descriptor, after retry, resetting the port (1)
Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:40 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:40 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:40 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:02:47 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:02:47 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:02:47 KrinkleMac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 14 21:02:54 KrinkleMac.local com.apple.usbmuxd[34]: _handle_timer heartbeat detected detach for device 0x147-192.168.178.13:0!
Jan 14 21:03:03 KrinkleMac kernel[0]: BRCM2070 Hub::terminate(kIOServiceSynchronous) timeout
Jan 14 21:03:04 KrinkleMac kernel[0]: USBF: 145268.325 AppleUSBHubPort[0xffffff8039bc4c00]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:03:20 KrinkleMac kernel[0]: USBF: 145285.139 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:21 KrinkleMac kernel[0]: USBF: 145285.572 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:03:22 KrinkleMac kernel[0]: USBF: 145286.868 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:23 KrinkleMac kernel[0]: USBF: 145288.132 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:03:24 KrinkleMac kernel[0]: USBF: 145288.882 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:03:25 KrinkleMac kernel[0]: USBF: 145289.385 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF: 145329.455 AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 1 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF: 145329.456 AppleUSBHubPort[0xffffff8038a96200]::FatalError - Port 2 of Hub at 0xfa110000 reported error 0xe00002c0 while doing clearing port feature (1)
Jan 14 21:04:05 KrinkleMac kernel[0]: USBF: 145329.492 AppleUSBHubPort[0xffffff803a9a6600]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF: 145330.483 AppleUSBHubPort[0xffffff803a24e400]::FatalError - Port 3 of Hub at 0xfa110000 reported error 0xe00002c0 while doing get status (first in port status change)
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF: 145330.703 IOUSBCompositeDriver[0xffffff803b7c3700](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:04:06 KrinkleMac kernel[0]: USBF: 145330.703 IOUSBCompositeDriver[0xffffff803c98b400](CompositeDevice) GetFullConfigDescriptor(0) returned NULL
Jan 14 21:04:09 KrinkleMac kernel[0]: USBF: 145333.634 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:09 KrinkleMac kernel[0]: USBF: 145334. 67 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:10 KrinkleMac kernel[0]: USBF: 145334.916 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:10 KrinkleMac kernel[0]: USBF: 145335.347 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:16 KrinkleMac kernel[0]: USBF: 145340.675 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:16 KrinkleMac kernel[0]: USBF: 145341.108 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:18 KrinkleMac kernel[0]: USBF: 145343.300 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:19 KrinkleMac kernel[0]: USBF: 145343.803 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:20 KrinkleMac kernel[0]: USBF: 145344.644 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:23 KrinkleMac kernel[0]: USBF: 145348. 42 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:24 KrinkleMac kernel[0]: USBF: 145348.868 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:24 KrinkleMac kernel[0]: USBF: 145349.299 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF: 145355. 76 [0xffffff8038559600] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF: 145355. 76 [0xffffff8038559600] The IOUSBFamily gave up enumerating a USB device after 10 retries. (Port 1 of Hub at 0xfa100000)
Jan 14 21:04:30 KrinkleMac kernel[0]: USBF: 145355. 76 [0xffffff8038559600] The IOUSBFamily was not able to enumerate a device.
Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe
Jan 14 21:04:42 KrinkleMac kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
Jan 14 21:04:42 KrinkleMac kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Jan 14 21:04:42 KrinkleMac kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Jan 14 21:04:44 KrinkleMac kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
Jan 14 21:05:20 localhost bootlog[0]: BOOT_TIME 1358193920 0
Jan 14 21:05:26 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jan 14 21:05:26 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Jan 14 21:05:41 localhost com.apple.launchd[1] (com.apple.automountd): Unknown key for boolean: NSSupportsSuddenTermination
Jan 14 21:05:41 localhost kernel[0]: PMAP: PCID enabled
Jan 14 21:05:41 localhost kernel[0]: Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64I've recorded the logs several times now and although a lot is variable (likely unrelated errors and crap). The following 5 lines consistently occur right before the freeze:
1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe
1/18/13 11:06:10.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
1/18/13 11:06:10.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
1/18/13 11:06:10.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
1/18/13 11:06:24.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
1/18/13 11:07:22.000 PM bootlog[0]: BOOT_TIME 1358546842 0
1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe
1/18/13 11:29:27.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0041
1/18/13 11:29:27.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
1/18/13 11:29:27.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
1/18/13 11:30:02.000 PM kernel[0]: [AppleBluetoothHCIControllerUSBTransport][ClearFeatureInterruptEndpointHalt] -- ClearPipeStall returned e000404f
1/18/13 11:31:39.000 PM bootlog[0]: BOOT_TIME 1358548299 0 -
I have a lot of problems with my MBP 10.8.5 freezes very often. The consol shows a lot of problems and I do not know what to do to fix this and would so much appreciate help to fix this. After reading about the next generation OSX i decided to not do the upgrade at this point but do not know if that is a correct observation.
Info from EtreCheck:
Hardware Information:
MacBook Pro (17-inch, Early 2011)
MacBook Pro - model: MacBookPro8,3
1 2.2 GHz Intel Core i7 CPU: 4 cores
16 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 1024 MB
Audio Plug-ins:
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
Startup Items:
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
ProTec6b: Path: /Library/StartupItems/ProTec6b
StartOuc: Path: /Library/StartupItems/StartOuc
System Software:
OS X 10.8.5 (12F45) - Uptime: 0 days 0:49:18
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
S.M.A.R.T. Status: Failing
disk0s1 (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 749,3 GB (494,6 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] cn.com.zte.DelMonitor.plist
[loaded] cn.com.zte.PPPMonitor.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.versioncueCS4.plist
[loaded] com.autodesk.backburner_manager.plist
[loaded] com.autodesk.backburner_server.plist
[failed] com.autodesk.backburner_start.plist
[loaded] com.ea.origin.ESHelper.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
[loaded] com.oracle.java.JavaUpdateHelper.plist
Launch Agents:
[loaded] cn.com.zte.usbswapper.plist
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.AdobeCreativeCloud.plist
[loaded] com.adobe.CS4ServiceManager.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] com.wacom.wacomtablet.plist
[loaded] com.zte.mcserver.plist
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.[...].plist
[loaded] com.adobe.ARM.[...].plist
[failed] com.apple.CSConfigDotMacCert-[redacted]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist
[failed] com.plexapp.helper.plist
[loaded] com.spotify.webhelper.plist
User Login Items:
iTunesHelper
Dropbox
3rd Party Preference Panes:
Adobe Version Cue CS4
Flash Player
Flip4Mac WMV
Java
WacomTablet
Internet Plug-ins::
WacomNetscape: Version: 2.1.0-1 - SDK 10.8
Unity Web Player: Version: UnityPlayer version 4.1.2f1
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7
FlashPlayer-10.6: Version: 11.9.900.152 - SDK 10.6
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
Silverlight: Version: 5.1.10411.0 - SDK 10.6
Flash Player: Version: 11.9.900.152 - SDK 10.6
QuickTime Plugin: Version: 7.7.1
iPhotoPhotocast: Version: 7.0 - SDK 10.8
AdobeExManCCDetect_x86_64: Version: AdobeExManCCDetect_x86_64 1.0.0.0 - SDK 10.7
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
User Internet Plug-ins::
Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
None
Old applications:
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
RailModeller: Version: 4.1.7 - SDK 10.4
/Applications/RailModeller 4.1.7/RailModeller.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 697.84 GB Disk used: 237.20 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 75
Oldest backup: 2012-01-04 15:18:02 +0000
Last backup: 2013-12-08 10:02:10 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 237.20 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
4% Safari
3% Console
3% WindowServer
3% spindump
2% EtreCheck
Top Processes by Memory:
262 MB WebProcess
213 MB Safari
164 MB Mail
147 MB mds
147 MB Finder
Virtual Memory Statistics:
11.51 GB Free RAM
2.37 GB Active RAM
531 MB Inactive RAM
1.59 GB Wired RAM
503 MB Page-ins
0 B Page-outs
The console for approx. last couple of hours:
2013-12-08 10:18:00,121
fontd[346]
ATSFindFolder timeout. (domain:-32766, dirType:'font', createFolder:true, ATSServer pid:346)
2013-12-08 10:18:00,122
fontd[346]
FSFindFolder failed for domain 18446744073709518850: 0x4294967176. Now relying on persistent store for said domain.
2013-12-08 10:18:20,049
com.apple.SecurityServer[21]
Session 100006 created
2013-12-08 10:18:22,636
TabletDriver[329]
*** Giving up waiting for application /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/WacomTouchDriver.app to launch. ***
2013-12-08 10:18:35,999
TabletDriver[329]
*** Giving up waiting for application /Library/Application Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app to launch. ***
2013-12-08 10:18:45,476
gconfd (peterkallviks-409)[409]
_@@@@@@@@@@@@@@____/opt/dplat/bin/../etc/gconf/2//path
2013-12-08 10:19:02,672
com.apple.iCloudHelper[423]
AOSKit WARN: APS timeout encountered (cxn initialization)
2013-12-08 10:19:02,674
com.apple.iCloudHelper[423]
AOSKit WARN: Failed to get response from APSConnection's initialization method(s)
2013-12-08 10:19:24,140
com.apple.SecurityServer[21]
Session 100002 created
2013-12-08 10:19:25,283
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab8200c0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
2013-12-08 10:19:25,284
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab8200c0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
2013-12-08 10:19:25,284
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab8200c0>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.syncdefaultsd.push-user=501-env=production
2013-12-08 10:19:26,000
kernel[0]
considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild
2013-12-08 10:19:34,976
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 10:19:51,668
com.apple.SecurityServer[21]
Session 100008 created
2013-12-08 10:20:01,286
genatsdb[470]
########## genatsdb Sandboxed. ##########
2013-12-08 10:20:14,618
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 10:21:02,232
Finder[301]
_CSBackupServerProxySendMessage() failed to send message to backup server, error: -5
2013-12-08 10:21:58,561
com.apple.launchd[1]
(com.apple.quicklook.satellite.97894D95-D1D1-4537-AEFC-B61F2E1E2C8E[517]) Exited: Killed: 9
2013-12-08 10:21:58,836
SystemUIServer[300]
*** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:21:58,837
SystemUIServer[300]
*** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:22:01,576
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 10:22:04,245
SystemUIServer[300]
FCUserCanLogin [93] -- _FCMIGUserCanLogin failed with error 268451843.
2013-12-08 10:22:23,792
NotificationCenter[316]
It does not make sense to draw an image when [NSGraphicsContext currentContext] is nil. This is a programming error. Break on void _NSWarnForDrawingImageWithNoCurrentContext() to debug. This will be logged only once. This may break in the future.
2013-12-08 10:22:28,761
Creative Cloud[331]
objc[331]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
2013-12-08 10:22:28,762
Creative Cloud[331]
objc[331]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
2013-12-08 10:22:36,078
Creative Cloud[331]
objc[331]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
2013-12-08 10:22:36,079
Creative Cloud[331]
objc[331]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/ACC/C3ContainerBL.dylib and /Applications/Utilities/Adobe Application Manager/UWA/UpdaterCore.framework/UpdaterCore. One of the two will be used. Which one is undefined.
2013-12-08 10:22:47,005
genatsdb[470]
*GENATSDB* FontObjects generated = 815
2013-12-08 10:23:20,357
revisiond[35]
pread(9, 0x10accb000, 4662, 12624152) failed: read length doesn't match request, read 0 bytes, file is 12554840 bytes long
2013-12-08 10:23:20,779
revisiond[35]
There was a problem compacting storage file 36
2013-12-08 10:24:11,455
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab81d460>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.AddressBook.PushNotification-user=501 darkWakeEnabled-env=production
2013-12-08 10:24:11,455
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab81d460>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.AddressBook.PushNotification-user=501 darkWakeEnabled-env=production
2013-12-08 10:24:11,455
apsd[168]
<APSConnectionNotificationQueue: 0x7fe1ab81d460>: outstanding count -1 for com.apple.apsd-queue-port=com.apple.AddressBook.PushNotification-user=501 darkWakeEnabled-env=production
2013-12-08 10:25:43,984
Creative Cloud[331]
open on /Users/peterkallviks/Library/Application Support/Adobe/OOBE//com.adobe.accc.home/assets/FLPR_13.0.png: File exists
2013-12-08 10:26:48,308
mds[43]
Unable to talk to lsboxd
2013-12-08 10:26:57,000
kernel[0]
fsevents: watcher dbfseventsd (pid: 721) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
2013-12-08 10:27:05,922
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:16,024
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:26,126
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:36,228
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:46,330
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:27:56,431
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:06,533
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:16,636
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:26,737
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:36,839
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:46,940
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:28:57,042
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:07,144
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:17,246
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:27,348
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:37,450
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:47,553
fseventsd[53]
client_buffer_flush: failed to send 32 events to client pid: 42 (status: 268435460)
2013-12-08 10:29:49,376
com.apple.mtmd[42]
FSEvents timed out without an end event
2013-12-08 10:32:41,358
loginwindow[47]
find_shared_window: WID -1
2013-12-08 10:32:41,359
loginwindow[47]
CGSGetWindowTags: Invalid window 0xffffffff
2013-12-08 10:32:41,359
loginwindow[47]
find_shared_window: WID -1
2013-12-08 10:32:41,359
loginwindow[47]
CGSSetWindowTags: Invalid window 0xffffffff
2013-12-08 10:32:41,403
loginwindow[47]
ERROR | -[LWBuiltInScreenLockAuthLion preLoad] | guestEnabled is true, but guest mode is not set to a usable value
2013-12-08 10:32:41,953
loginwindow[47]
*** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:32:41,953
loginwindow[47]
*** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
2013-12-08 10:35:41,404
com.apple.kextcache[445]
Kernel file /mach_kernel does not contain requested arch: i386
2013-12-08 10:39:18,000
kernel[0]
disk0s2: I/O error.
2013-12-08 10:39:18,000
kernel[0]
hfs_clonefile: cluster_read failed - 5
2013-12-08 10:39:49,828
com.apple.kextcache[445]
Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache.
2013-12-08 10:50:19,000
kernel[0]
PM notification timeout (pid 331, Creative Cloud)
2013-12-08 10:50:19,000
kernel[0]
PM notification timeout (pid 574, Adobe CEF Helper)
2013-12-08 10:50:19,000
kernel[0]
PM notification timeout (pid 573, Adobe CEF Helper)
2013-12-08 10:50:25,948
com.apple.time[11]
Next maintenance wake [Backup Interval]: <date: 0x7fc3cea00120> Sun Dec 08 11:16:05 2013 CET (approx)
2013-12-08 10:50:25,949
com.apple.time[11]
Requesting maintenance wake [Backup Interval]: <date: 0x7fc3cea00120> Sun Dec 08 11:16:05 2013 CET (approx)
2013-12-08 10:50:26,000
kernel[0]
hibernate image path: /var/vm/sleepimage
2013-12-08 10:50:26,000
kernel[0]
AirPort_Brcm43xx::powerChange: System Sleep
2013-12-08 10:50:26,000
kernel[0]
hibernate_alloc_pages act 401719, inact 99418, anon 9881, throt 0, spec 233293, wire 398381, wireinit 284831
2013-12-08 10:50:26,000
kernel[0]
hibernate_setup(0) took 0 ms
2013-12-08 10:50:26,000
kernel[0]
sizeof(IOHibernateImageHeader) == 512
2013-12-08 10:50:27,000
kernel[0]
kern_open_file_for_direct_io(0) took 550 ms
2013-12-08 10:50:27,000
kernel[0]
Opened file /var/vm/sleepimage, size 17179869184, partition base 0x0, maxio 2000000 ssd 0
2013-12-08 10:50:27,000
kernel[0]
hibernate image major 1, minor 0, blocksize 512, pollers 5
2013-12-08 10:50:45,000
kernel[0]
hibernate_page_list_setall(preflight 0) start 0xffffff81fae83000, 0xffffff81faf03000
2013-12-08 10:50:45,000
kernel[0]
hibernate_page_list_setall time: 729 ms
2013-12-08 10:50:45,000
kernel[0]
pages 1108663, wire 380476, act 283887, inact 26, cleaned 0 spec 136, zf 5625, throt 0, could discard act 100659 inact 89513 purgeable 15183 spec 233158 cleaned 0
2013-12-08 10:50:45,000
kernel[0]
hibernate_page_list_setall found pageCount 670150
2013-12-08 10:50:45,000
kernel[0]
IOHibernatePollerOpen, ml_get_interrupts_enabled 0
2013-12-08 10:50:45,000
kernel[0]
IOHibernatePollerOpen(0)
2013-12-08 10:50:45,000
kernel[0]
encryptStart 132f0
2013-12-08 10:50:45,000
kernel[0]
bitmap_size 0x7f5a4, previewSize 0x19bce0, writing 669453 pages @ 0x22e574
2013-12-08 10:50:45,000
kernel[0]
encryptEnd d25a600
2013-12-08 10:50:45,000
kernel[0]
image1Size 0x1a253c00, encryptStart1 0x132f0, End1 0xd25a600
2013-12-08 10:50:45,000
kernel[0]
encryptStart 1a253c00
2013-12-08 10:50:45,000
kernel[0]
encryptEnd 3924b800
2013-12-08 10:50:45,000
kernel[0]
PMStats: Hibernate write took 13346 ms
2013-12-08 10:50:45,000
kernel[0]
all time: 13346 ms, comp bytes: 2742444032 time: 2023 ms 1292 Mb/s, crypt bytes: 740552464 time: 1266 ms 557 Mb/s,
2013-12-08 10:50:45,000
kernel[0]
image 958707712 (5%), uncompressed 2742444032 (669542), compressed 951456736 (34%), sum1 71f81683, sum2 f97a694b
2013-12-08 10:50:45,000
kernel[0]
wired_pages_encrypted 194311, wired_pages_clear 185557, dirty_pages_encrypted 289674
2013-12-08 10:50:45,000
kernel[0]
hibernate_write_image done(0)
2013-12-08 10:50:45,000
kernel[0]
sleep
2013-12-08 10:50:45,000
kernel[0]
Wake reason: EC.PowerButton PWRB (User)
2013-12-08 10:53:36,000
kernel[0]
AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
2013-12-08 10:53:36,000
kernel[0]
Previous Sleep Cause: 5
2013-12-08 10:53:36,000
kernel[0]
wlEvent: en1 en1 Link DOWN virtIf = 0
2013-12-08 10:53:36,000
kernel[0]
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
2013-12-08 10:53:36,000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
2013-12-08 10:53:36,000
kernel[0]
en1: 802.11d country code set to 'X3'.
2013-12-08 10:53:36,000
kernel[0]
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
2013-12-08 10:53:36,000
kernel[0]
TBT W (1): 0 [x]
2013-12-08 10:53:39,256
loginwindow[47]
resume called when there was already a timer
2013-12-08 10:53:40,000
kernel[0]
en1: 802.11d country code set to 'SE'.
2013-12-08 10:53:40,000
kernel[0]
en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
2013-12-08 10:53:40,000
kernel[0]
MacAuthEvent en1 Auth result for: 28:cf:da:b4:ff:1b MAC AUTH succeeded
2013-12-08 10:53:40,000
kernel[0]
wlEvent: en1 en1 Link UP virtIf = 0
2013-12-08 10:53:40,000
kernel[0]
AirPort: Link Up on en1
2013-12-08 10:53:40,000
kernel[0]
en1: BSSID changed to 28:cf:da:b4:ff:1b
2013-12-08 10:53:40,000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
2013-12-08 10:53:40,000
kernel[0]
AirPort: RSN handshake complete on en1
2013-12-08 10:53:59,000
kernel[0]
disk0s2: I/O error.
2013-12-08 10:53:59,000
kernel[0]
hfs_clonefile: cluster_read failed - 5
2013-12-08 10:54:00,968
airportd[1483]
_doAutoJoin: Already associated to “Zip99”. Bailing on auto-join.
2013-12-08 10:54:00,984
airportd[1483]
_doAutoJoin: Already associated to “Zip99”. Bailing on auto-join.
2013-12-08 10:54:20,652
loginwindow[47]
ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
2013-12-08 10:54:52,005
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 10:54:53,871
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 10:55:03,067
Mail[1524]
Using V2 Layout
2013-12-08 10:55:06,082
librariand[1531]
MMe quota status changed: under quota
2013-12-08 10:55:06,725
com.apple.backupd[1527]
Starting automatic backup
2013-12-08 10:55:10,183
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,184
Dock[299]
CGSCopyWindowProperty
2013-12-08 10:55:10,184
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,184
Dock[299]
CGSGetWindowTags: Invalid window 0xffffffff
2013-12-08 10:55:10,184
Dock[299]
CGSGetWindowOwner
2013-12-08 10:55:10,184
Dock[299]
CGSGetWindowBounds
2013-12-08 10:55:10,184
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,185
Dock[299]
CGSSetWindowToReleaseBackingOnOrderOut: Invalid window 0xffffffff
2013-12-08 10:55:10,185
Dock[299]
find_shared_window: WID -1
2013-12-08 10:55:10,185
Dock[299]
CGSGetWindowTags: Invalid window 0xffffffff
2013-12-08 10:55:10,185
Dock[299]
CGSGetWindowOwner
2013-12-08 10:55:10,185
Dock[299]
CGSGetWindowBounds
2013-12-08 10:55:11,931
com.apple.SecurityServer[21]
Session 100010 created
2013-12-08 10:55:16,383
Mail[1524]
Couldn't contact spell checker for Multilingual
2013-12-08 10:55:18,608
Mail[1524]
*** -[IADomainCache init]: IA domains cache couldn't be read.
2013-12-08 10:55:19,112
SyncServer[1546]
Warning: ISDLog() couldn't open the log file /Users/peterkallviks/Library/Logs/Sync/syncservices.log: returned errno 2, "No such file or directory"
2013-12-08 10:55:19,144
SyncServer[1546]
[0x7fd5b8c1ba20] |Logging|Info| Sync Services Version 713.1
2013-12-08 10:55:19,144
SyncServer[1546]
[0x7fd5b8c1ba20] |Logging|Info| Logging initialized, engine version 713.1 : log level 3
2013-12-08 10:55:20,000
kernel[0]
nspace-handler-set-snapshot-time: 1386496522
2013-12-08 10:55:28,146
com.apple.backupd[1527]
Attempting to mount network destination URL: afp://Peter%20K%C3%A4llviks;[email protected]/Data
2013-12-08 10:55:29,000
kernel[0]
AppleSRP started.
2013-12-08 10:55:31,000
kernel[0]
MacAuthEvent en1 Auth result for: 28:cf:da:b4:ff:1c MAC AUTH succeeded
2013-12-08 10:55:31,000
kernel[0]
wlEvent: en1 en1 Link UP virtIf = 0
2013-12-08 10:55:31,000
kernel[0]
AirPort: RSN handshake complete on en1
2013-12-08 10:55:31,000
kernel[0]
wl0: Roamed or switched channel, reason #8, bssid 28:cf:da:b4:ff:1c
2013-12-08 10:55:31,000
kernel[0]
en1: BSSID changed to 28:cf:da:b4:ff:1c
2013-12-08 10:55:31,000
kernel[0]
en1::IO80211Interface::postMessage bssid changed
2013-12-08 10:55:32,390
coreaudiod[303]
Disabled automatic stack shots because audio IO is active
2013-12-08 10:55:33,190
coreaudiod[303]
Enabled automatic stack shots because audio IO is inactive
2013-12-08 10:55:37,000
kernel[0]
AFP_VFS afpfs_mount: /Volumes/Data, pid 1555
2013-12-08 10:55:37,000
kernel[0]
AFP_VFS afpfs_mount : succeeded on volume 0xffffff81ca5f6008 /Volumes/Data (error = 0, retval = 0)
2013-12-08 10:55:37,699
com.apple.backupd[1527]
Mounted network destination at mount point: /Volumes/Data using URL: afp://Peter%20K%C3%A4llviks;[email protected]/Data
2013-12-08 10:55:37,707
com.apple.backupd-helper[1569]
Not starting scheduled Time Machine backup - computer is on battery power.
2013-12-08 10:55:41,999
com.apple.backupd[1527]
Renaming /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle to /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle
2013-12-08 10:55:42,055
com.apple.backupd[1527]
Failed to move /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle to file://localhost/Volumes/Data/Peter%20K%C3%A4llvikss%20MacBook%20Pro.sparsebund le/ error Error Domain=NSCocoaErrorDomain Code=516 "“Peter Källvikss MacBook Pro” couldn’t be moved to “Data” because an item with the same name already exists." UserInfo=0x7fc1e9615d00 {NSSourceFilePathErrorKey=/Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle, NSUserStringVariant=(
Move
), NSDestinationFilePath=/Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle, NSFilePath=/Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle, NSUnderlyingError=0x7fc1e9615ba0 "The operation couldn’t be completed. File exists"}
2013-12-08 10:55:49,830
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,830
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,831
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,831
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:55:49,831
Safari[1581]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary on line 3. Parsing will be abandoned. Break on _CFPropertyListMissingSemicolon to debug.
2013-12-08 10:56:24,090
com.apple.backupd-helper[1630]
Not starting scheduled Time Machine backup - computer is on battery power.
2013-12-08 10:56:25,070
com.apple.backupd[1527]
Disk image /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine-säkerhetskopior
2013-12-08 10:56:25,074
com.apple.backupd[1527]
Backing up to: /Volumes/Time Machine-säkerhetskopior/Backups.backupdb
2013-12-08 10:56:46,755
com.apple.backupd[1527]
Using file event preflight for Macintosh HD
2013-12-08 10:56:50,318
sandboxd[1646]
([1457]) mdworker(1457) deny file-read-xattr /Users/peterkallviks/Library/Cookies/Cookies.binarycookies (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 uti:dyn.ah62d4rv4ge80k2py plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4203029)
2013-12-08 10:56:50,000
kernel[0]
Sandbox: sandboxd(1646) deny mach-lookup com.apple.coresymbolicationd
2013-12-08 10:57:06,457
com.apple.backupd[1527]
Will copy (79.2 MB) from Macintosh HD
2013-12-08 10:57:06,473
com.apple.backupd[1527]
Found 521 files (79.2 MB) needing backup
2013-12-08 10:57:06,512
com.apple.backupd[1527]
3.58 GB required (including padding), 1.26 TB available
2013-12-08 10:57:30,880
SyncServer[1546]
[0x7fd5b8c1ba20] |Server|Info| Cancelling all sync plans.
2013-12-08 10:57:44,638
SyncServer[1546]
[0x7fd5b8c1ba20] |Server|Info| Goodnight, Gracie.
2013-12-08 11:01:48,525
com.apple.backupd[1527]
Copied 7217 files (85.8 MB) from volume Macintosh HD.
2013-12-08 11:01:49,321
com.apple.backupd[1527]
Using file event preflight for Macintosh HD
2013-12-08 11:01:49,341
com.apple.backupd[1527]
Will copy (1.9 MB) from Macintosh HD
2013-12-08 11:01:49,344
com.apple.backupd[1527]
Found 56 files (1.9 MB) needing backup
2013-12-08 11:01:49,344
com.apple.backupd[1527]
3.49 GB required (including padding), 1.26 TB available
2013-12-08 11:02:10,205
com.apple.backupd[1527]
Copied 1962 files (1.9 MB) from volume Macintosh HD.
2013-12-08 11:02:12,277
com.apple.backupd[1527]
Created new backup: 2013-12-08-110210
2013-12-08 11:02:18,413
com.apple.backupd[1527]
Starting post-backup thinning
2013-12-08 11:02:18,413
com.apple.backupd[1527]
No post-back up thinning needed: no expired backups exist
2013-12-08 11:02:19,893
com.apple.backupd[1527]
Backup completed successfully.
2013-12-08 11:02:29,234
com.apple.backupd[1527]
Ejected Time Machine disk image: /Volumes/Data/Peter Källvikss MacBook Pro.sparsebundle
2013-12-08 11:02:29,000
kernel[0]
AFP_VFS afpfs_unmount: /Volumes/Data, flags 0, pid 1851
2013-12-08 11:02:29,852
com.apple.backupd[1527]
Ejected Time Machine network volume.
2013-12-08 11:02:30,000
kernel[0]
AFP_VFS afpfs_unmount : We are the last mnt/sbmnt using volume /Volumes/Data 0xffffff81ca5f6008
2013-12-08 11:02:30,000
kernel[0]
AFP_VFS afpfs_unmount : We are the last volume using socket /Volumes/Data 0xffffff81ca5f6008
2013-12-08 11:02:30,000
kernel[0]
AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed
2013-12-08 11:03:31,941
sandboxd[1886]
([1856]) mdworker(1856) deny file-read-xattr /Users/peterkallviks/Library/Cookies/Cookies.binarycookies (pre-plugin fstype:hfs fsflag:480D000 flags:240000005E diag:0 uti:dyn.ah62d4rv4ge80k2py plugin:internalPlainTextImporter - find suspect file using: sudo mdutil -t 4203267)
2013-12-08 11:03:31,000
kernel[0]
Sandbox: sandboxd(1886) deny mach-lookup com.apple.coresymbolicationd
2013-12-08 11:05:11,606
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 11:05:11,663
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 11:06:21,653
com.apple.time[288]
Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
2013-12-08 11:10:48,282
coreaudiod[303]
Disabled automatic stack shots because audio IO is active
2013-12-08 11:10:49,412
coreaudiod[303]
Enabled automatic stack shots because audio IO is inactive
2013-12-08 11:12:58,542
Mail[1524]
-[ABMailRecent valueForProperty:socialProfiles] - unknown property. This warning will be displayed only once per unknown property, per session.
2013-12-08 11:16:05,738
com.apple.backupd-helper[2289]
Not starting scheduled Time Machine backup - computer is on battery power.
2013-12-08 11:17:35,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:18:26,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:19:06,000
kernel[0]
CODE SIGNING: cs_invalid_page(0x1000): p=2394[GoogleSoftwareUp] clearing CS_VALID
2013-12-08 11:19:59,000
kernel[0]
nspace-handler-update: did not find token 1297
2013-12-08 11:20:00,000
kernel[0]
nspace-handler-update: did not find token 1298
2013-12-08 11:20:00,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:20:01,000
kernel[0]
nspace-handler-unblock: did not find token 1297
2013-12-08 11:20:01,000
kernel[0]
nspace-handler-unblock: did not find token 1298
2013-12-08 11:20:19,471
coreaudiod[303]
Disabled automatic stack shots because audio IO is active
2013-12-08 11:20:20,153
coreaudiod[303]
Enabled automatic stack shots because audio IO is inactive
2013-12-08 11:31:29,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:32:40,000
kernel[0]
disk0s2: I/O error.
2013-12-08 11:36:28,170
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 11:36:28,225
CVMServer[236]
Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
2013-12-08 12:10:31,000
bootlog[0]
BOOT_TIME 1386501031 0
2013-12-08 12:10:52,000
kernel[0]
PMAP: PCID enabled
2013-12-08 12:10:52,000
kernel[0]
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
2013-12-08 12:10:52,000
kernel[0]
vm_page_bootstrap: 4031295 free pages and 130241 wired pages
2013-12-08 12:10:52,000
kernel[0]
kext submap [0xffffff7f80742000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000742000]
2013-12-08 12:10:52,000
kernel[0]
zone leak detection enabled
2013-12-08 12:10:52,000
kernel[0]
standard timeslicing quantum is 10000 us
2013-12-08 12:10:52,000
kernel[0]
standard background quantum is 2500 us
2013-12-08 12:10:52,000
kernel[0]
mig_table_max_displ = 74
2013-12-08 12:10:52,000
kernel[0]
TSC Deadline Timer supported and enabled
2013-12-08 12:10:52,000
kernel[0]
corecrypto kext started!
2013-12-08 12:10:52,000
kernel[0]
Running kernel space in FIPS MODE
2013-12-08 12:10:52,000
kernel[0]
Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
2013-12-08 12:10:52,000
kernel[0]
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS integrity POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS AES CBC POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS TDES CBC POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS AES ECB AESNI POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS AES XTS AESNI POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS SHA POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS HMAC POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS ECDSA POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS DRBG POST test passed!
2013-12-08 12:10:52,000
kernel[0]
corecrypto.kext FIPS POST passed!
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
2013-12-08 12:10:52,000
kernel[0]
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
2013-12-08 12:10:52,000
kernel[0]
calling mpo_policy_init for TMSafetyNet
2013-12-08 12:10:52,000
kernel[0]
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2013-12-08 12:10:52,000
kernel[0]
calling mpo_policy_init for Sandbox
2013-12-08 12:10:52,000
kernel[0]
Security policy loaded: Seatbelt sandbox policy (Sandbox)
2013-12-08 12:10:52,000
kernel[0]
calling mpo_policy_init for Quarantine
2013-12-08 12:10:52,000
kernel[0]
Security policy loaded: Quarantine policy (Quarantine)
2013-12-08 12:10:52,000
kernel[0]
Copyright (c) 1982, 1986, 1989, 1991, 1993
2013-12-08 12:10:52,000
kernel[0]
The Regents of the University of California. All rights reserved.
2013-12-08 12:10:52,000
kernel[0]
MAC Framework successfully initialized
2013-12-08 12:10:52,000
kernel[0]
using 16384 buffer headers and 10240 cluster IO buffer headers
2013-12-08 12:10:52,000
kernel[0]
IOAPIC: Version 0x20 Vectors 64:87
2013-12-08 12:10:52,000
kernel[0]
ACPI: sleep states S3 S4 S5
2013-12-08 12:10:52,000
kernel[0]
AppleIntelCPUPowerManagement: Turbo Ratios 88AB
2013-12-08 12:10:52,000
kernel[0]
AppleIntelCPUPowerManagement: (built 13:50:43 Sep 29 2013) initialization complete
2013-12-08 12:10:52,000
kernel[0]
pci build Sep 29 2013 13:35:16, flags 0x23008, pfm64 (36 cpu) 0xf80000000, 0x80000000
2013-12-08 12:10:52,000
kernel[0]
[ PCI configuration begin ]
2013-12-08 12:10:52,000
kernel[0]
Sleep failure code 0x00000000 0x28006500
2013-12-08 12:10:52,000
kernel[0]
console relocated to 0xf80010000
2013-12-08 12:10:52,000
kernel[0]
[ PCI configuration end, bridges 13, devices 17 ]
2013-12-08 12:10:52,000
kernel[0]
mbinit: done [128 MB total pool size, (85/42) split]
2013-12-08 12:10:52,000
kernel[0]
Pthread support ABORTS when sync kernel primitives misused
2013-12-08 12:10:52,000
kernel[0]
rooting via boot-uuid from /chosen: 5396423A-0B8F-3005-B02A-A61F078A4856
2013-12-08 12:10:52,000
kernel[0]
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResouThe following entry may indicate a failing harddrive, so doing backups and replacing the harddrive may be in order.
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
S.M.A.R.T. Status: Failing <-----------
A little bit about drive S.M.A.R.T. status:
"The most basic information that SMART provides is the SMART status. It provides only two values: "threshold not exceeded" and "threshold exceeded". Often these are represented as "drive OK" or "drive fail" respectively. A "threshold exceeded" value is intended to indicate that there is a relatively high probability that the drive will not be able to honor its specification in the future: that is, the drive is "about to fail". The predicted failure may be catastrophic or may be something as subtle as the inability to write to certain sectors, or perhaps slower performance than the manufacturer's declared minimum."
http://en.wikipedia.org/wiki/S.M.A.R.T. -
I have MBP mid 2010, 15" maverick 10.9.4 and it freezes with any virtualization software. I tried Parallels and Virtualbox. both freezes.. I did go through forums and disable automatic graphics switching, reset PRAM and SMC, reinstalled OS/X no luck. Virtualbox 4.3.14 seems not freezing much as compare to parallels but virtual box has no drag drop support and its painful without that. parallels has good features but it freezes my computer. I tried their support, they helped me twice to remote control my computer but so far no help. No real good person was there to fix. just check some setting etc...
EtreCheck returns following:
EtreCheck version: 1.9.12 (48)
Report generated July 19, 2014 at 7:36:58 AM PDT
Hardware Information:
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 512 MB
Color LCD 1440 x 900
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:2:49
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 337.71 GB (211.71 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 161.53 GB (29.6 GB free)
MATSHITADVD-R UJ-898
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[not loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.3.14) Support
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.14) Support
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.14) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.3.14) Support
Startup Items:
MySQLCOM: Path: /Library/StartupItems/MySQLCOM
Launch Daemons:
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[failed] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[failed] com.parallels.mobile.kextloader.launchdaemon.plist Support
[not loaded] org.virtualbox.startup.plist Support
Launch Agents:
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
User Launch Agents:
[loaded] com.google.keystone.agent.plist Support
[loaded] com.parallels.mobile.startgui.launchagent.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
iTunesHelper
Internet Plug-ins:
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
CitrixICAClientPlugIn: Version: 11.1.0 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 60 Check version
Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
Open in Internet Explorer: Version: 1.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix online plug-in Support
MySQL Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
27% com.apple.IconServicesAgent
23% Finder
14% WindowServer
3% mdworker
1% coreaudiod
Top Processes by Memory:
90 MB ocspd
90 MB Finder
74 MB mds_stores
67 MB com.apple.IconServicesAgent
57 MB CalendarAgent
Virtual Memory Information:
5.33 GB Free RAM
1.58 GB Active RAM
238 MB Inactive RAM
875 MB Wired RAM
175 MB Page-ins
0 B Page-outs
System log for windowserver says following:
Date/Time: 2014-07-18 23:48:37 -0700
OS Version: 10.9.4 (Build 13E28)
Architecture: x86_64
Report Version: 18
Command: WindowServer
Path: /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer
Version: ??? (???)
Parent: launchd [1]
PID: 133
Event: wakeups (microstackshots only)
Wakeups: 262 wakeups per second for 172 seconds
Duration: 172.00s
Steps: 154
Hardware model: MacBookPro6,2
Active cpus: 4
Fan speed: 5978 rpm
Powerstats for: WindowServer [133]
Start time: 2014-07-18 23:49:03 -0700
End time: 2014-07-18 23:51:05 -0700
Parent: launchd
Microstackshots: 8 samples (5%)
Primary state: 6 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 8 samples Active
Power Source: 0 samples on Battery, 8 samples on AC
8 start + 1 (libdyld.dylib) [0x110d5a5fd]
8 main + 9 (WindowServer) [0x10f3aef96]
8 CGXServer + 807 (CoreGraphics) [0x10fb3e4b6]
8 CGXRunOneServicesPass + 164 (CoreGraphics) [0x10fb3dc79]
8 run_timer_pass + 379 (CoreGraphics) [0x10fb6d858]
7 update_display_callback + 125 (CoreGraphics) [0x10fc0fa3d]
4 CGXUpdateDisplay + 1111 (CoreGraphics) [0x10fc0ff58]
4 CGXUpdateMagicMirror + 1169 (CoreGraphics) [0x10fc25e38]
1 WSRedrawSpecifiedWindowsToDisplayAndRegion + 1312 (CoreGraphics) [0x10fc18594]
1 CGXAcquireDisplayDeviceSurface + 1889 (CoreGraphics) [0x10fa66b18]
1 CGXDisplayUnionFlushShape + 425 (CoreGraphics) [0x10fbbce82]
1 CFRelease + 424 (CoreFoundation) [0x10f3d8398]
1 region_finalize + 37 (CoreGraphics) [0x10f7dca81]
1 szone_free_definite_size + 1467 (libsystem_malloc.dylib) [0x110f63f8d]
1 tiny_free_list_remove_ptr + 301 (libsystem_malloc.dylib) [0x110f681a3]
1 WSRedrawSpecifiedWindowsToDisplayAndRegion + 1838 (CoreGraphics) [0x10fc187a2]
1 redraw_window + 112 (CoreGraphics) [0x10fc158b5]
1 CGRegionCreateCopy + 22 (CoreGraphics) [0x10f7d6c1b]
1 assert_check_shape + 15 (CoreGraphics) [0x10f7d4241]
1 WSRedrawSpecifiedWindowsToDisplayAndRegion + 2014 (CoreGraphics) [0x10fc18852]
1 CGLayerComposite + 116 (CoreGraphics) [0x10fa5e310]
1 CGXGLAccelComposite + 1233 (CoreGraphics) [0x10fb47e71]
1 gl_composite_layers + 38 (CoreGraphics) [0x10fb486b2]
1 gl_composite_layer + 479 (CoreGraphics) [0x10fb4c7fd]
1 gl_composite_layer_core + 18343 (CoreGraphics) [0x10fb5527f]
1 glBegin_Exec + 96 (GLEngine) [0x1461f15e4]
1 gleDoDrawDispatchCore + 502 (GLEngine) [0x1462d52a0]
1 gldUpdateDispatch + 1068 (GeForceTeslaGLDriver) [0x1234402ec2a3]
1 ??? (GeForceTeslaGLDriver + 2900114) [0x1234402c4092]
1 ??? (GeForceTeslaGLDriver + 2892812) [0x1234402c240c]
1 WSRedrawSpecifiedWindowsToDisplayAndRegion + 2196 (CoreGraphics) [0x10fc18908]
1 CGXReleaseDisplayDeviceSurface + 197 (CoreGraphics) [0x10fa67d13]
1 CGXGLAccelFinish + 156 (CoreGraphics) [0x10fb43c89]
1 ??? (GeForceTeslaGLDriver + 3068556) [0x1234402ed28c]
1 ??? (GeForceTeslaGLDriver + 3069807) [0x1234402ed76f]
1 ??? (GeForceTeslaGLDriver + 2977197) [0x1234402d6dad]
1 ??? (GeForceTeslaGLDriver + 2399379) [0x123440249c93]
2 CGXUpdateDisplay + 8838 (CoreGraphics) [0x10fc11d87]
2 CGXReleaseDisplayDeviceSurface + 292 (CoreGraphics) [0x10fa67d72]
2 MPFinishSurfaceForDisplayDevice + 227 (CoreGraphics) [0x10f916b67]
2 IOAccelFlushSurfaceOnFramebuffers + 95 (IOKit) [0x10f72b6ab]
2 IOConnectCallMethod + 266 (IOKit) [0x10f7211b5]
2 io_connect_method + 377 (IOKit) [0x10f77a6fe]
2 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x110ee8a1a]
2 <Kernel mode>
1 CGXUpdateDisplay + 8689 (CoreGraphics) [0x10fc11cf2]
1 CGLayerComposite + 116 (CoreGraphics) [0x10fa5e310]
1 CGXGLAccelComposite + 1233 (CoreGraphics) [0x10fb47e71]
1 gl_composite_layers + 38 (CoreGraphics) [0x10fb486b2]
1 gl_composite_layer + 12696 (CoreGraphics) [0x10fb4f7b6]
1 glBegin_Exec + 96 (GLEngine) [0x1461f15e4]
1 gleDoDrawDispatchCore + 502 (GLEngine) [0x1462d52a0]
1 gldUpdateDispatch + 1173 (GeForceTeslaGLDriver) [0x1234402ec30c]
1 ??? (GeForceTeslaGLDriver + 2695711) [0x12344029221f]
1 ??? (GeForceTeslaGLDriver + 2793413) [0x1234402a9fc5]
1 update_display_callback + 46 (CoreGraphics) [0x10fc0f9ee]
1 CGXDisplayDeviceSurfaceIsReady + 17 (CoreGraphics) [0x10fbbccc0]
1 MPDisplayDeviceSurfaceIsReady + 21 (CoreGraphics) [0x10f916e68]
Binary Images:
0x10f3ae000 - 0x10f3aeffd WindowServer (599.25.10.1) <61FE4BA9-1E5D-37F6-9126-24ACD7C7559D> /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer
0x10f3bf000 - 0x10f5a4fff com.apple.CoreFoundation 6.9 (855.17) <729BD6DA-1F63-3E72-A148-26F21EBF52BB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x10f71c000 - 0x10f788fff com.apple.framework.IOKit 2.0.1 <057FDBA3-56D6-3903-8C0B-849214BF1985> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x10f7ca000 - 0x1100ea32b com.apple.CoreGraphics 1.600.0 <EC14B831-96BB-3A50-A451-E36BDC8F59FB> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x110d57000 - 0x110d5aff7 libdyld.dylib (239.4) <A1273A02-4928-3BAC-A846-6C069DC1A0A6> /usr/lib/system/libdyld.dylib
0x110ed7000 - 0x110ef3ff7 libsystem_kernel.dylib (2422.110.17) <873931CE-D1AF-3596-AADB-D2E63C9AB29F> /usr/lib/system/libsystem_kernel.dylib
0x110f5d000 - 0x110f78ff7 libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
0x1461dd000 - 0x14637dff7 GLEngine (9.6.1) <28300FBD-E3B2-35D2-BB54-77DCE62FC371> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x123440000000 - 0x12344086dfff com.apple.GeForceTeslaGLDriver 8.24.15 (8.2.4) <C49EA520-7D7F-3708-BDC2-845C2A39C976> /System/Library/Extensions/GeForceTeslaGLDriver.bundle/Contents/MacOS/GeForceTe slaGLDriver
Powerstats for: prl_client_app
Start time: 2014-07-18 23:48:38 -0700
End time: 2014-07-18 23:51:28 -0700
Microstackshots: 141 samples (91%)
Primary state: 126 samples Non-Frontmost App, Non-Background Priority, Kernel mode
User Activity: 0 samples Idle, 141 samples Active
Power Source: 0 samples on Battery, 141 samples on AC
136 thread_start + 13 (libsystem_pthread.dylib) [0x105fdffc9]
136 _pthread_start + 137 (libsystem_pthread.dylib) [0x105fdb72a]
136 _pthread_body + 138 (libsystem_pthread.dylib) [0x105fdb899]
136 QThread::terminate() + 762 (QtCorePrl) [0x10924629a]
118 ??? [0x100074172]
118 ??? [0x100074324]
118 ??? [0x1000a086a]
118 ??? [0x1000f89f1]
117 ??? [0x10041c71a]
117 IOConnectCallStructMethod + 56 (IOKit) [0x101f1340a]
117 IOConnectCallMethod + 349 (IOKit) [0x101f13208]
117 io_connect_method + 377 (IOKit) [0x101f6c6fe]
117 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x105edea1a]
1 IOConnectCallAsyncMethod + 422 (IOKit) [0x101f133d2]
1 <User mode>
10 ??? [0x10012d50e]
3 ??? [0x10018dfa4]
2 ??? [0x1001b6463]
2 kevent + 10 (libsystem_kernel.dylib) [0x105ee364a]
1 ??? [0x1001b6428]
1 read + 10 (libsystem_kernel.dylib) [0x105ee39f2]
3 ??? [0x10018dedd]
3 ??? [0x10018e18c]
2 ??? [0x1001938ef]
2 ??? [0x10006eb63]
2 ??? [0x10006e0d3]
2 ??? [0x10006db26]
2 <User mode>
1 ??? [0x1001938e0]
1 ??? [0x1001945b8]
1 ??? [0x100194ed1]
1 ??? [0x10006eab8]
1 ??? [0x10006defb]
1 <User mode>
3 ??? [0x10015ee88]
1 ??? [0x10015f009]
1 ??? [0x10015f31b]
1 ??? [0x10015ff83]
1 ??? [0x10016025d]
1 ??? [0x1001615da]
1 ??? [0x1002763ed]
1 ??? [0x100273c2d]
1 ??? [0x1002788bd]
1 ??? [0x100277cad]
1 ??? [0x10028108c]
1 SCSITaskDeviceClass::CreateSCSITask() + 37 (SCSITaskLib) [0x1a8fcb1d7]
1 SCSITaskClass::alloc(SCSITaskDeviceClass*, unsigned int, unsigned int) + 246 (SCSITaskLib) [0x1a8fc9b38]
1 SCSITaskClass::Init(SCSITaskDeviceClass*, unsigned int, unsigned int) + 142 (SCSITaskLib) [0x1a8fc9e06]
1 SCSITaskClass::SetSenseDataBuffer(void*, unsigned char) + 152 (SCSITaskLib) [0x1a8fca572]
1 IOConnectCallScalarMethod + 46 (IOKit) [0x101f1348d]
1 IOConnectCallMethod + 266 (IOKit) [0x101f131b5]
1 io_connect_method + 377 (IOKit) [0x101f6c6fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x105edea1a]
1 ??? [0x10015efbb]
1 ??? [0x1001648db]
1 ??? [0x100290c99]
1 ??? [0x100388285]
1 ??? [0x100c3255d]
1 __psynch_cvsignal + 10 (libsystem_kernel.dylib) [0x105ee26fe]
1 ??? [0x10015efc7]
1 ??? [0x100290b8c]
1 ??? [0x100388330]
1 ??? [0x100c3279a]
1 ??? [0x100292cd3]
1 ??? [0x10028d92e]
1 ??? [0x10028cc54]
1 ??? [0x10041d9ed]
1 IOConnectCallStructMethod + 56 (IOKit) [0x101f1340a]
1 IOConnectCallMethod + 349 (IOKit) [0x101f13208]
1 io_connect_method + 377 (IOKit) [0x101f6c6fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x105edea1a]
1 ??? [0x10018dfe0]
1 ??? [0x10012d4a0]
1 <User mode>
1 ??? [0x1076b9375]
1 ??? [0x1076b7a4e]
1 __sendmsg + 10 (libsystem_kernel.dylib) [0x105ee2a6a]
1 <Frontmost App>
1 ??? [0x100c32330]
1 __psynch_cvsignal + 24 (libsystem_kernel.dylib) [0x105ee270c]
1 <User mode>
1 ??? [0x10037932f]
1 ??? [0x1003791e4]
1 __sendto + 10 (libsystem_kernel.dylib) [0x105ee2a9a]
1 ??? [0x1001df195]
1 ??? [0x1001dfeee]
1 ??? [0x1003ccd4f]
1 host_statistics + 147 (libsystem_kernel.dylib) [0x105ed2957]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x105edea1a]
1 ??? [0x1001df204]
1 ??? [0x1001e1dae]
1 ??? [0x1001e3dac]
1 ??? [0x100091714]
1 ??? [0x100093b4a]
1 ??? [0x1001d4800]
1 ??? [0x100096366]
1 ??? [0x1000961d0]
1 ??? [0x100094eff]
1 ??? [0x1000ce3ff]
1 ??? [0x1000d05b5]
1 ??? [0x1000e2757]
1 ??? [0x1006f3fb5]
1 ??? [0x10070484d]
1 ??? [0x100869598]
1 ??? [0x100883a0d]
1 ??? [0x1008d2af0]
1 ??? [0x1008df6ad]
1 ??? [0x100931497]
1 ??? [0x100931dbe]
1 ??? [0x100931bf5]
1 <User mode>
1 ??? [0x100178ce0]
1 ??? [0x100182999]
1 ??? [0x10017d4e5]
1 ??? [0x1001cfd63]
1 ??? [0x1001d05c3]
1 ??? [0x1001d11ca]
1 ??? [0x1001e81fe]
1 ??? [0x10020846b]
1 ??? [0x10020dc51]
1 glDrawArraysInstanced_ACC_GL3Exec + 240 (GLEngine) [0x1a57bf55a]
1 gleDoDrawDispatchCoreGL3 + 502 (GLEngine) [0x1a57f879a]
1 gldUpdateDispatch + 916 (GeForceTeslaGLDriver) [0x1234402ec20b]
1 ??? (GeForceTeslaGLDriver + 3142581) [0x1234402ff3b5]
1 ??? (GeForceTeslaGLDriver + 2142841) [0x12344020b279]
1 ??? (GeForceTeslaGLDriver + 3147824) [0x123440300830]
1 ??? (GeForceTeslaGLDriver + 3145417) [0x1234402ffec9]
1 ??? (GeForceTeslaGLDriver + 3143608) [0x1234402ff7b8]
1 ??? (GeForceTeslaGLDriver + 135999) [0x12344002133f]
1 ??? (GeForceTeslaGLDriver + 134316) [0x123440020cac]
1 ??? (GeForceTeslaGLDriver + 111166) [0x12344001b23e]
1 ??? (GeForceTeslaGLDriver + 107028) [0x12344001a214]
1 ??? (GeForceTeslaGLDriver + 5151685) [0x1234404e9bc5]
1 ??? (GeForceTeslaGLDriver + 105289) [0x123440019b49]
1 ??? (GeForceTeslaGLDriver + 5139259) [0x1234404e6b3b]
1 ??? (GeForceTeslaGLDriver + 5138624) [0x1234404e68c0]
1 ??? (GeForceTeslaGLDriver + 5951853) [0x1234405ad16d]
1 vsnprintf + 80 (libsystem_c.dylib) [0x105e1701c]
1 __v2printf + 1 (libsystem_c.dylib) [0x105e31105]
1 <User mode>
1 ??? [0x1003e0848]
1 ??? [0x10041e5c8]
1 ??? [0x100c2f7ff]
1 fsync + 10 (libsystem_kernel.dylib) [0x105ee3392]
1 pthread_cond_wait + 10 (libsystem_pthread.dylib) [0x105fdf8b0]
1 <User mode>
5 ??? [0x10000db34]
5 ??? [0x1000a7b8f]
5 QCoreApplication::exec() + 188 (QtCorePrl) [0x10935a22c]
5 QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) + 324 (QtCorePrl) [0x109357df4]
5 QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) + 68 (QtCorePrl) [0x109357a44]
5 QDesktopWidget::resizeEvent(QResizeEvent*) + 13040 (QtGuiPrl) [0x1096004d0]
3 -[NSApplication run] + 553 (AppKit) [0x1045f799c]
2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122 (AppKit) [0x10460389b]
2 _DPSNextEvent + 1434 (AppKit) [0x10460424e]
2 _BlockUntilNextEventMatchingListInModeWithFilter + 65 (HIToolbox) [0x10ff7c5bc]
2 ReceiveNextEventCommon + 479 (HIToolbox) [0x10ff7c7b7]
2 RunCurrentEventLoopInMode + 226 (HIToolbox) [0x10ff7ca0d]
2 CFRunLoopRunSpecific + 309 (CoreFoundation) [0x1036d2e75]
1 __CFRunLoopRun + 1268 (CoreFoundation) [0x1036d35a4]
1 __psynch_mutexwait + 10 (libsystem_kernel.dylib) [0x105ee2746]
1 <Frontmost App>
1 __CFRunLoopRun + 776 (CoreFoundation) [0x1036d33b8]
1 __CFRunLoopDoObservers + 391 (CoreFoundation) [0x1036e1cd7]
1 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23 (CoreFoundation) [0x1036e1d67]
1 __83-[NSWindow _postWindowNeedsDisplayOrLayoutOrUpdateConstraintsUnlessPostingDisabled]_block_ invoke1331 + 46 (AppKit) [0x104d76061]
1 _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints + 884 (AppKit) [0x1047a074e]
1 -[NSView displayIfNeeded] + 1680 (AppKit) [0x10473b2da]
1 -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 2828 (AppKit) [0x10475be9f]
1 -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 314 (AppKit) [0x10475eeb1]
1 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 6151 (AppKit) [0x104760bc4]
1 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 3199 (AppKit) [0x10476003c]
1 -[NSView _drawRect:clip:] + 3846 (AppKit) [0x1047630b1]
1 QMacInputContext::reset() + 7696 (QtGuiPrl) [0x1095eb770]
1 QWidgetPrivate::drawWidget(QPaintDevice*, QRegion const&, QPoint const&, int, QPainter*, QWidgetBackingStore*) + 1470 (QtGuiPrl) [0x10969f3ee]
1 QWidgetPrivate::paintBackground(QPainter*, QRegion const&, int) const + 795 (QtGuiPrl) [0x109693a3b]
1 QMacStyle::metaObject() const + 352 (QtGuiPrl) [0x10960e9b0]
1 QPainter::drawTiledPixmap(QRectF const&, QPixmap const&, QPointF const&) + 735 (QtGuiPrl) [0x1097893ef]
1 qt_mac_cg_context(QPaintDevice const*) + 13234 (QtGuiPrl) [0x109840f72]
1 CGContextFillRects + 96 (CoreGraphics) [0x10dda8d2a]
1 ripc_DrawRects + 399 (libRIP.A.dylib) [0x118e1e2e1]
1 ripc_Render + 304 (libRIP.A.dylib) [0x118e22468]
1 RIPLayerBltShape + 463 (libRIP.A.dylib) [0x118e24027]
1 ripd_Lock + 43 (libRIP.A.dylib) [0x118e24487]
1 CGSDeviceLock + 240 (CoreGraphics) [0x10ddac38f]
1 _CGSLockWindow + 3765 (CoreGraphics) [0x10ddad47c]
1 _CGSSynchronizeWindowBackingStore + 97 (CoreGraphics) [0x10de2b9ab]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x105edea1a]
1 <Frontmost App>
1 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 377 (AppKit) [0x10460399a]
1 -[NSEvent _initWithCGSEvent:eventRef:] + 2604 (AppKit) [0x1047a60ea]
1 -[NSEvent _initTouches] + 1379 (AppKit) [0x10480ff95]
1 -[NSThemeFrame _hitTest:ignoringResizeRegion:] + 514 (AppKit) [0x1047a3bd2]
1 -[NSView hitTest:] + 448 (AppKit) [0x10472f510]
1 QMacInputContext::reset() + 5326 (QtGuiPrl) [0x1095eae2e]
1 -[NSView hitTest:] + 448 (AppKit) [0x10472f510]
1 QMacInputContext::reset() + 5326 (QtGuiPrl) [0x1095eae2e]
1 -[NSView hitTest:] + 448 (AppKit) [0x10472f510]
1 QMacInputContext::reset() + 5326 (QtGuiPrl) [0x1095eae2e]
1 -[NSView hitTest:] + 354 (AppKit) [0x10472f4b2]
1 -[NSViewHierarchyLock lockForReadingWithExceptionHandler:] + 72 (AppKit) [0x104641217]
1 <Frontmost App, User mode>
2 -[NSApplication run] + 646 (AppKit) [0x1045f79f9]
2 ??? [0x100016d2b]
1 -[NSApplication sendEvent:] + 2819 (AppKit) [0x1047a78f2]
1 QMacInputContext::reset() + 25169 (QtGuiPrl) [0x1095efbb1]
1 QMacCocoaAutoReleasePool::~QMacCocoaAutoReleasePool() + 19318 (QtGuiPrl) [0x1095fb296]
1 QApplicationPrivate::sendMouseEvent(QWidget*, QMouseEvent*, QWidget*, QWidget*, QWidget**, QPointer<QWidget>&, bool) + 334 (QtGuiPrl) [0x10964be6e]
1 QCoreApplication::notifyInternal(QObject*, QEvent*) + 124 (QtCorePrl) [0x109358b3c]
1 QApplication::notify(QObject*, QEvent*) + 8851 (QtGuiPrl) [0x10964f583]
1 QBasicTimer::start(int, QObject*) + 34 (QtCorePrl) [0x109357952]
1 QBasicTimer::stop() + 61 (QtCorePrl) [0x10935791d]
1 QDesktopWidget::resizeEvent(QResizeEvent*) + 7343 (QtGuiPrl) [0x1095fee8f]
1 CFRunLoopTimerInvalidate + 421 (CoreFoundation) [0x1037139b5]
1 <Frontmost App, User mode>
1 -[NSApplication sendEvent:] + 325 (AppKit) [0x1047a6f34]
1 -[NSApplication _handleGestureEvent:] + 628 (AppKit) [0x10481124c]
1 -[NSApplication _handleTouchEvent:] + 324 (AppKit) [0x10499a5a2]
1 QMacInputContext::reset() + 25122 (QtGuiPrl) [0x1095efb82]
1 QMacCocoaAutoReleasePool::~QMacCocoaAutoReleasePool() + 13175 (QtGuiPrl) [0x1095f9a97]
1 QMacInputContext::reset() + 40094 (QtGuiPrl) [0x1095f35fe]
1 QMacInputContext::reset() + 40510 (QtGuiPrl) [0x1095f379e]
1 <Frontmost App, User mode>
Binary Images:
0x10350f000 - 0x103572ffb com.apple.SystemConfiguration 1.13.1 (1.13.1) <2C8E1A73-5AD6-3A7D-8ED8-D6755555A993> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x101f0e000 - 0x101f7afff com.apple.framework.IOKit 2.0.1 <057FDBA3-56D6-3903-8C0B-849214BF1985> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x103663000 - 0x103848fff com.apple.CoreFoundation 6.9 (855.17) <729BD6DA-1F63-3E72-A148-26F21EBF52BB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x1045e0000 - 0x105156ff7 com.apple.AppKit 6.9 (1265.21) <9DC13B27-841D-3839-93B2-3EDE66157BDE> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x105dc4000 - 0x105e4dff7 libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
0x105ecd000 - 0x105ee9ff7 libsystem_kernel.dylib (2422.110.17) <873931CE-D1AF-3596-AADB-D2E63C9AB29F> /usr/lib/system/libsystem_kernel.dylib
0x105fda000 - 0x105fe1ff7 libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
0x10921e000 - 0x1094e3fff QtCorePrl 4.8 <3A6F5B6C-999C-CE48-54C4-357B936F9630> /Applications/Parallels Desktop.app/Contents/Frameworks/QtCorePrl.framework/Versions/4/QtCorePrl
0x1095bd000 - 0x109fbafe7 QtGuiPrl (4.8) <C0DE3A78-7E0E-8F51-CB23-4CAB89877163> /Applications/Parallels Desktop.app/Contents/Frameworks/QtGuiPrl.framework/Versions/4/QtGuiPrl
0x10dd94000 - 0x10e6b432b com.apple.CoreGraphics 1.600.0 <EC14B831-96BB-3A50-A451-E36BDC8F59FB> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics
0x10ff4e000 - 0x1101f8ff5 com.apple.HIToolbox 2.1.1 <26FF0E2C-1CD7-311F-ACF0-84F3D5273AD6> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x118e1c000 - 0x118e44ffb libRIP.A.dylib (599.25.10.1) <623091DF-5769-3326-90EB-44EFC8087660> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A .dylib
0x1a5700000 - 0x1a58a0ff7 GLEngine (9.6.1) <28300FBD-E3B2-35D2-BB54-77DCE62FC371> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x1a8fc8000 - 0x1a8fcbff7 com.apple.iokit.SCSITaskLib 3.6.6 (3.6.6) <8A04C3BA-F5AE-319B-812F-4B5D2EA62B9A> /System/Library/Extensions/IOSCSIArchitectureModelFamily.kext/Contents/PlugIns/ SCSITaskUserClient.kext/Contents/PlugIns/SCSITaskLib.plugin/Contents/MacOS/SCSIT askLib
0x123440000000 - 0x12344086dfff com.apple.GeForceTeslaGLDriver 8.24.15 (8.2.4) <C49EA520-7D7F-3708-BDC2-845C2A39C976> /System/Library/Extensions/GeForceTeslaGLDriver.bundle/Contents/MacOS/GeForceTe slaGLDriver
Just to add when MacBook Pro freezes graphics screen acts weird and below task bar isn't rendered properly, mouse moves keyboard light also works but clicking anywhere yields nothing. tried with command-option-shift-esc, command-option-esc, command-q nothing works, sometime (once in a blue moon) above keys work and system regains after a while but i am so far not able to use any virtualization software, gave enough 4 GB 2 CPUs to virtualization software(s), yes i tried running both separately means when virtual box is running parallels is not even there on my box and vice-versa... no luck sofar. please help. my notebook is out of warranty and I don't think apple will even take a look.
What could be wrong here?I have another freeze...
Date/Time: 2014-07-29 17:55:22 -0700
OS Version: 10.9.4 (Build 13E28)
Architecture: x86_64
Report Version: 18
Command: WindowServer
Path: /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer
Version: ??? (???)
Parent: launchd [1]
PID: 189
Event: wakeups (microstackshots only)
Wakeups: 186 wakeups per second for 242 seconds
Duration: 242.00s
Steps: 234
Hardware model: MacBookPro6,2
Active cpus: 4
Fan speed: 2002 rpm
Powerstats for: WindowServer [189]
Start time: 2014-07-29 17:56:10 -0700
End time: 2014-07-29 17:59:24 -0700
Parent: launchd
Microstackshots: 53 samples (22%)
Primary state: 37 samples Non-Frontmost App, Non-Background Priority, User mode
User Activity: 0 samples Idle, 53 samples Active
Power Source: 53 samples on Battery, 0 samples on AC
50 start + 1 (libdyld.dylib) [0x7fff897fe5fd]
50 main + 9 (WindowServer) [0x1007eff96]
50 CGXServer + 807 (CoreGraphics) [0x7fff88dc64b6]
22 CGXRunOneServicesPass + 164 (CoreGraphics) [0x7fff88dc5c79]
22 run_timer_pass + 379 (CoreGraphics) [0x7fff88df5858]
22 update_display_callback + 125 (CoreGraphics) [0x7fff88e97a3d]
7 CGXUpdateDisplay + 1111 (CoreGraphics) [0x7fff88e97f58]
7 CGXUpdateMagicMirror + 1169 (CoreGraphics) [0x7fff88eade38]
4 WSRedrawSpecifiedWindowsToDisplayAndRegion + 1312 (CoreGraphics) [0x7fff88ea0594]
2 CGXAcquireDisplayDeviceSurface + 3125 (CoreGraphics) [0x7fff88ceefec]
2 CGXGLAccelAccess + 154 (CoreGraphics) [0x7fff88dcb87a]
2 attach_surface + 203 (CoreGraphics) [0x7fff88d72feb]
1 gliAttachDrawableWithOptions + 264 (GLEngine) [0x7fff89c1faf9]
1 gldAttachDrawable + 966 (libGPUSupport.dylib) [0x132e76f08]
1 IOConnectCallMethod + 349 (IOKit) [0x7fff86550208]
1 io_connect_method + 377 (IOKit) [0x7fff865a96fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff8dc3ea1a]
1 <Kernel mode>
1 gliAttachDrawableWithOptions + 796 (GLEngine) [0x7fff89c1fd0d]
1 gliUpdateDispatchState + 247 (GLEngine) [0x7fff89daa0c1]
1 ??? (GeForceTeslaGLDriver + 6039086) [0x1234405c262e]
1 CGXAcquireDisplayDeviceSurface + 2101 (CoreGraphics) [0x7fff88ceebec]
1 CGRegionGetBoundingBox + 17 (CoreGraphics) [0x7fff88a5e548]
1 CGXAcquireDisplayDeviceSurface + 2441 (CoreGraphics) [0x7fff88ceed40]
1 CGRegionEnumeratorCreateWithDirection + 1 (CoreGraphics) [0x7fff88d92889]
2 WSRedrawSpecifiedWindowsToDisplayAndRegion + 2014 (CoreGraphics) [0x7fff88ea0852]
2 CGLayerComposite + 116 (CoreGraphics) [0x7fff88ce6310]
2 CGXGLAccelComposite + 1233 (CoreGraphics) [0x7fff88dcfe71]
2 gl_composite_layers + 38 (CoreGraphics) [0x7fff88dd06b2]
2 gl_composite_layer + 479 (CoreGraphics) [0x7fff88dd47fd]
2 gl_composite_layer_core + 570 (CoreGraphics) [0x7fff88dd8d12]
2 gl_composite_core_animation + 2004 (CoreGraphics) [0x7fff88dd1e2c]
2 CARenderOGLRenderDisplay + 82 (QuartzCore) [0x7fff8d74c174]
2 CA::OGL::render(CA::OGL::Renderer&, CA::Render::Update*) + 236 (QuartzCore) [0x7fff8d6b30ef]
2 CA::OGL::Renderer::render(CA::Render::Update const*) + 714 (QuartzCore) [0x7fff8d6b3430]
2 CA::OGL::render_root_layers(CA::OGL::Renderer&, x_link_struct const*, CA::OGL::Gstate const&) + 331 (QuartzCore) [0x7fff8d6baafb]
2 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
2 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
2 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
2 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
2 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
2 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
2 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
2 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 57 (QuartzCore) [0x7fff8d6be933]
1 CA::OGL::render_contents_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 2486 (QuartzCore) [0x7fff8d6bf54b]
1 CA::OGL::render_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 46 (QuartzCore) [0x7fff8d6bf648]
1 CA::OGL::render_shadow_path(CA::OGL::Renderer&, CA::OGL::Layer const*) + 350 (QuartzCore) [0x7fff8d758098]
1 CA::OGL::emit_shadow_path(CA::OGL::Context&, double, CA::Vec2<float> const&, unsigned int, int, bool, CA::Transform const&, CA::Render::Path*) + 485 (QuartzCore) [0x7fff8d765a62]
1 CA::OGL::emit_shadow_rect(CA::OGL::Context&, CA::Rect const&, double, unsigned int, int, bool, CA::Transform const&) + 430 (QuartzCore) [0x7fff8d765704]
1 CA::OGL::emit_nine_part_rect(CA::OGL::Context&, CA::OGL::RectState const&, double const*, double const*, float const*, float const*, float const*, float const*, unsigned int) + 1004 (QuartzCore) [0x7fff8d6c9a60]
1 CA::OGL::emit_quad_indices(CA::OGL::Context&, CA::OGL::RectState const&, unsigned short const*, unsigned long, unsigned long, unsigned long) + 273 (QuartzCore) [0x7fff8d6c9fe9]
1 CA::OGL::Context::ClippedArray::next_rect(CA::Bounds&) + 141 (QuartzCore) [0x7fff8d6c0fb9]
1 CA::OGL::Context::array_flush() + 62 (QuartzCore) [0x7fff8d6b6f42]
1 CA::OGL::GLContext::draw_elements(CA::OGL::PrimitiveMode, unsigned int, unsigned short const*, CA::OGL::Vertex const*, unsigned int, unsigned int, CA::OGL::ClipPlane const*) + 397 (QuartzCore) [0x7fff8d6b7105]
1 glDrawRangeElements_IMM_Exec + 300 (GLEngine) [0x7fff89cc23a5]
1 gleDoDrawDispatchCore + 104 (GLEngine) [0x7fff89d09112]
1 gleUpdateDrawFramebufferState + 525 (GLEngine) [0x7fff89d08407]
1 gldUpdateDrawFramebuffer + 168 (libGPUSupport.dylib) [0x132e709a1]
1 ??? (GeForceTeslaGLDriver + 2981976) [0x1234402d8058]
1 ??? (GeForceTeslaGLDriver + 2886424) [0x1234402c0b18]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 57 (QuartzCore) [0x7fff8d6be933]
1 CA::OGL::render_contents_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 2129 (QuartzCore) [0x7fff8d6bf3e6]
1 CA::OGL::draw_tiled_image(CA::OGL::Context&, CA::Render::TiledTexture*, CA::OGL::TextureFilter, CA::OGL::TextureFilter, float, CA::OGL::ContentsGeometry const&, bool) + 72 (QuartzCore) [0x7fff8d788704]
1 CA::OGL::TiledImageGeometry::draw_tiles(bool, bool) + 1763 (QuartzCore) [0x7fff8d78746d]
1 CA::OGL::Context::bind_image(unsigned int, CA::Render::Texture*, unsigned int, CA::OGL::TextureFilter, CA::OGL::TextureFilter, float, CA::OGL::TextureEdgeMode, CA::OGL::ContentsGeometry const*, float*) + 1354 (QuartzCore) [0x7fff8d6c2b90]
1 CA::ColorProgram::Cache::lookup(CGColorSpace*, bool, bool, CGColorRenderingIntent) + 43 (QuartzCore) [0x7fff8d6c4255]
1 CARequiresColorMatching + 46 (QuartzCore) [0x7fff8d68db52]
1 CGColorSpaceIsUncalibrated + 19 (CoreGraphics) [0x7fff88a69c78]
1 WSRedrawSpecifiedWindowsToDisplayAndRegion + 2196 (CoreGraphics) [0x7fff88ea0908]
1 CGXReleaseDisplayDeviceSurface + 197 (CoreGraphics) [0x7fff88cefd13]
1 CGXGLAccelFinish + 156 (CoreGraphics) [0x7fff88dcbc89]
1 ??? (GeForceTeslaGLDriver + 3068556) [0x1234402ed28c]
1 ??? (GeForceTeslaGLDriver + 3069241) [0x1234402ed539]
1 IOConnectCallMethod + 349 (IOKit) [0x7fff86550208]
1 io_connect_method + 377 (IOKit) [0x7fff865a96fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff8dc3ea1a]
1 <Kernel mode>
6 CGXUpdateDisplay + 677 (CoreGraphics) [0x7fff88e97da6]
5 prepare_CoreAnimation_update_state + 358 (CoreGraphics) [0x7fff88e9cda6]
3 CGXBeginSurfaceLayerUpdate + 1582 (CoreGraphics) [0x7fff88ec4d13]
2 CA::Shape::copy_region() const + 25 (QuartzCore) [0x7fff8d7039bb]
2 CGSNewEmptyRegion + 24 (CoreGraphics) [0x7fff88a7d451]
2 region_create_with_shape + 37 (CoreGraphics) [0x7fff88a56fe5]
2 CGTypeCreateInstance + 79 (CoreGraphics) [0x7fff88a57130]
1 CFAllocatorAllocate + 1 (CoreFoundation) [0x7fff8463e131]
1 _CFRuntimeCreateInstance + 310 (CoreFoundation) [0x7fff8463e026]
1 CA::Shape::copy_region() const + 47 (QuartzCore) [0x7fff8d7039d1]
1 CGSNewRegionWithData + 75 (CoreGraphics) [0x7fff88b04407]
1 shape_alloc_data + 109 (CoreGraphics) [0x7fff88a6b79a]
1 malloc + 24 (libsystem_malloc.dylib) [0x7fff85b7c26a]
2 CGXBeginSurfaceLayerUpdate + 964 (CoreGraphics) [0x7fff88ec4aa9]
1 WSBackingStoreSetPurgeable + 43 (CoreGraphics) [0x7fff88e03e72]
1 IOAccelSurfaceControl + 74 (IOKit) [0x7fff8655a3c0]
1 IOConnectCallScalarMethod + 46 (IOKit) [0x7fff8655048d]
1 IOConnectCallMethod + 266 (IOKit) [0x7fff865501b5]
1 io_connect_method + 377 (IOKit) [0x7fff865a96fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff8dc3ea1a]
1 <Kernel mode>
1 WSBackingStoreSetPurgeable + 61 (CoreGraphics) [0x7fff88e03e84]
1 IOAccelSurfaceControl + 74 (IOKit) [0x7fff8655a3c0]
1 IOConnectCallScalarMethod + 46 (IOKit) [0x7fff8655048d]
1 IOConnectCallMethod + 266 (IOKit) [0x7fff865501b5]
1 io_connect_method + 377 (IOKit) [0x7fff865a96fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff8dc3ea1a]
1 <Kernel mode>
1 prepare_CoreAnimation_update_state + 269 (CoreGraphics) [0x7fff88e9cd4d]
1 CGXGLBeginCAUpdateGroup + 124 (CoreGraphics) [0x7fff88dced2a]
1 glTestFenceAPPLE_Exec + 48 (GLEngine) [0x7fff89c5c46e]
1 gleTestFence + 120 (GLEngine) [0x7fff89d11178]
1 gpuiTestFence + 102 (libGPUSupport.dylib) [0x132e6fa50]
1 ??? (GeForceTeslaGLDriver + 3079590) [0x1234402efda6]
5 CGXUpdateDisplay + 8689 (CoreGraphics) [0x7fff88e99cf2]
5 CGLayerComposite + 116 (CoreGraphics) [0x7fff88ce6310]
5 CGXGLAccelComposite + 1233 (CoreGraphics) [0x7fff88dcfe71]
5 gl_composite_layers + 38 (CoreGraphics) [0x7fff88dd06b2]
5 gl_composite_layer + 479 (CoreGraphics) [0x7fff88dd47fd]
5 gl_composite_layer_core + 570 (CoreGraphics) [0x7fff88dd8d12]
5 gl_composite_core_animation + 2004 (CoreGraphics) [0x7fff88dd1e2c]
4 CARenderOGLRenderDisplay + 82 (QuartzCore) [0x7fff8d74c174]
4 CA::OGL::render(CA::OGL::Renderer&, CA::Render::Update*) + 236 (QuartzCore) [0x7fff8d6b30ef]
4 CA::OGL::Renderer::render(CA::Render::Update const*) + 714 (QuartzCore) [0x7fff8d6b3430]
4 CA::OGL::render_root_layers(CA::OGL::Renderer&, x_link_struct const*, CA::OGL::Gstate const&) + 331 (QuartzCore) [0x7fff8d6baafb]
4 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
4 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
4 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
4 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
4 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
4 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
4 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
4 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
4 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
4 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
4 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
3 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 57 (QuartzCore) [0x7fff8d6be933]
2 CA::OGL::render_contents_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 2311 (QuartzCore) [0x7fff8d6bf49c]
2 CA::OGL::ContentsGeometry::fill_and_unbind(CA::OGL::Context&, CA::OGL::Image*, CA::OGL::TextureFilter, float) const + 104 (QuartzCore) [0x7fff8d6c438a]
2 CA::OGL::ContentsGeometry::fill_and_unbind(CA::OGL::Context&, CA::OGL::Image*) const + 285 (QuartzCore) [0x7fff8d6c4aed]
1 CA::OGL::fill_rect_tex(CA::OGL::Context&, CA::OGL::RectState const&, float const*) + 722 (QuartzCore) [0x7fff8d6c4fd4]
1 CA::OGL::emit_nine_part_rect(CA::OGL::Context&, CA::OGL::RectState const&, double const*, double const*, float const*, float const*, float const*, float const*, unsigned int) + 1004 (QuartzCore) [0x7fff8d6c9a60]
1 CA::OGL::emit_quad_indices(CA::OGL::Context&, CA::OGL::RectState const&, unsigned short const*, unsigned long, unsigned long, unsigned long) + 273 (QuartzCore) [0x7fff8d6c9fe9]
1 CA::OGL::Context::ClippedArray::next_rect(CA::Bounds&) + 322 (QuartzCore) [0x7fff8d6c106e]
1 CA::OGL::Context::array_flush() + 62 (QuartzCore) [0x7fff8d6b6f42]
1 CA::OGL::GLContext::draw_elements(CA::OGL::PrimitiveMode, unsigned int, unsigned short const*, CA::OGL::Vertex const*, unsigned int, unsigned int, CA::OGL::ClipPlane const*) + 397 (QuartzCore) [0x7fff8d6b7105]
1 glDrawRangeElements_IMM_Exec + 1032 (GLEngine) [0x7fff89cc2681]
1 gleBeginPrimitiveTCLFunc + 78 (GLEngine) [0x7fff89d283f2]
1 ??? (GeForceTeslaGLDriver + 3139668) [0x1234402fe854]
1 CA::OGL::fill_rect_tex(CA::OGL::Context&, CA::OGL::RectState const&, float const*) + 169 (QuartzCore) [0x7fff8d6c4dab]
1 CA::OGL::emit_one_part_rect(CA::OGL::Context&, CA::OGL::RectState const&, float const*, unsigned int) + 1111 (QuartzCore) [0x7fff8d6c0dc6]
1 CA::OGL::Context::ClippedArray::next_rect(CA::Bounds&) + 57 (QuartzCore) [0x7fff8d6c0f65]
1 CA::OGL::Context::array_flush() + 62 (QuartzCore) [0x7fff8d6b6f42]
1 CA::OGL::GLContext::draw_elements(CA::OGL::PrimitiveMode, unsigned int, unsigned short const*, CA::OGL::Vertex const*, unsigned int, unsigned int, CA::OGL::ClipPlane const*) + 343 (QuartzCore) [0x7fff8d6b70cf]
1 CA::OGL::GLContext::update_state() + 304 (QuartzCore) [0x7fff8d6b7282]
1 glBindTexture_Exec + 135 (GLEngine) [0x7fff89c210ed]
1 CA::OGL::render_contents_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 2486 (QuartzCore) [0x7fff8d6bf54b]
1 CA::OGL::render_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 140 (QuartzCore) [0x7fff8d6bf6a6]
1 CA::OGL::render_gradient(CA::OGL::Renderer&, CA::OGL::Layer const*, CA::Render::GradientLayer const*) + 1074 (QuartzCore) [0x7fff8d6d3290]
1 CA::OGL::fill_round_rect_tex(CA::OGL::Context&, CA::OGL::RectState const&, double, float const*) + 73 (QuartzCore) [0x7fff8d6d3843]
1 CA::OGL::fill_rect_tex(CA::OGL::Context&, CA::OGL::RectState const&, float const*) + 169 (QuartzCore) [0x7fff8d6c4dab]
1 CA::OGL::emit_one_part_rect(CA::OGL::Context&, CA::OGL::RectState const&, float const*, unsigned int) + 630 (QuartzCore) [0x7fff8d6c0be5]
1 CA::OGL::emit_quad_indices(CA::OGL::Context&, CA::OGL::RectState const&, unsigned short const*, unsigned long, unsigned long, unsigned long) + 273 (QuartzCore) [0x7fff8d6c9fe9]
1 CA::OGL::Context::ClippedArray::next_rect(CA::Bounds&) + 322 (QuartzCore) [0x7fff8d6c106e]
1 CA::OGL::Context::array_flush() + 62 (QuartzCore) [0x7fff8d6b6f42]
1 CA::OGL::GLContext::draw_elements(CA::OGL::PrimitiveMode, unsigned int, unsigned short const*, CA::OGL::Vertex const*, unsigned int, unsigned int, CA::OGL::ClipPlane const*) + 343 (QuartzCore) [0x7fff8d6b70cf]
1 CA::OGL::GLContext::update_state() + 40 (QuartzCore) [0x7fff8d6b717a]
1 CA::OGL::GLContext::update_shader() + 336 (QuartzCore) [0x7fff8d6b75ea]
1 CA::OGL::GLContext::get_shader(CA::OGL::ContextState const*) + 685 (QuartzCore) [0x7fff8d6b808f]
1 x_hash_table_lookup + 113 (QuartzCore) [0x7fff8d6776cb]
1 CA::OGL::gl_shader_compare(CA::OGL::GLShader*, CA::OGL::GLShader*) + 138 (QuartzCore) [0x7fff8d6c608d]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 220 (QuartzCore) [0x7fff8d6be9d6]
1 CA::OGL::render_layers(CA::OGL::Renderer&, CA::OGL::Layer*) + 144 (QuartzCore) [0x7fff8d6bd7b5]
1 CA::OGL::ImagingNode::render(CA::OGL::ImagingNode::RenderClosure*, unsigned int) + 433 (QuartzCore) [0x7fff8d6bd9e1]
1 CA::OGL::LayerNode::apply(float, CA::OGL::Surface**, float*) + 57 (QuartzCore) [0x7fff8d6be933]
1 CA::OGL::render_contents_background(CA::OGL::Renderer&, CA::OGL::Layer const*) + 2311 (QuartzCore) [0x7fff8d6bf49c]
1 CA::OGL::ContentsGeometry::fill_and_unbind(CA::OGL::Context&, CA::OGL::Image*, CA::OGL::TextureFilter, float) const + 104 (QuartzCore) [0x7fff8d6c438a]
1 CA::OGL::ContentsGeometry::fill_and_unbind(CA::OGL::Context&, CA::OGL::Image*) const + 285 (QuartzCore) [0x7fff8d6c4aed]
1 CA::OGL::fill_rect_tex(CA::OGL::Context&, CA::OGL::RectState const&, float const*) + 169 (QuartzCore) [0x7fff8d6c4dab]
1 CA::OGL::emit_one_part_rect(CA::OGL::Context&, CA::OGL::RectState const&, float const*, unsigned int) + 1111 (QuartzCore) [0x7fff8d6c0dc6]
1 CA::OGL::Context::ClippedArray::next_rect(CA::Bounds&) + 322 (QuartzCore) [0x7fff8d6c106e]
1 CA::OGL::Context::array_flush() + 62 (QuartzCore) [0x7fff8d6b6f42]
1 CA::OGL::GLContext::draw_elements(CA::OGL::PrimitiveMode, unsigned int, unsigned short const*, CA::OGL::Vertex const*, unsigned int, unsigned int, CA::OGL::ClipPlane const*) + 397 (QuartzCore) [0x7fff8d6b7105]
1 glDrawRangeElements_IMM_Exec + 300 (GLEngine) [0x7fff89cc23a5]
1 gleDoDrawDispatchCore + 502 (GLEngine) [0x7fff89d092a0]
1 gldUpdateDispatch + 1173 (GeForceTeslaGLDriver) [0x1234402ec30c]
1 ??? (GeForceTeslaGLDriver + 2692994) [0x123440291782]
1 ??? (GeForceTeslaGLDriver + 2685546) [0x12344028fa6a]
1 CARenderOGLRenderDisplay + 147 (QuartzCore) [0x7fff8d74c1b5]
1 CA::OGL::CGLContext::collect(bool) + 18 (QuartzCore) [0x7fff8d6b5872]
1 CA::OGL::CGLContext::delete_destination_texture() + 55 (QuartzCore) [0x7fff8d6a9711]
1 glDeleteTextures_Exec + 722 (GLEngine) [0x7fff89c2772f]
1 gleUnbindDeleteHashNamesAndObjects + 184 (GLEngine) [0x7fff89d16bfa]
1 gleUnbindTextureObject + 59 (GLEngine) [0x7fff89d47115]
1 ??? (GeForceTeslaGLDriver + 3068556) [0x1234402ed28c]
1 ??? (GeForceTeslaGLDriver + 3069241) [0x1234402ed539]
1 IOConnectCallMethod + 349 (IOKit) [0x7fff86550208]
1 io_connect_method + 377 (IOKit) [0x7fff865a96fe]
1 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff8dc3ea1a]
1 <Kernel mode>
4 CGXUpdateDisplay + 8838 (CoreGraphics) [0x7fff88e99d87]
4 CGXReleaseDisplayDeviceSurface + 292 (CoreGraphics) [0x7fff88cefd72]
4 MPFinishSurfaceForDisplayDevice + 227 (CoreGraphics) [0x7fff88b9eb67]
4 IOAccelFlushSurfaceOnFramebuffers + 95 (IOKit) [0x7fff8655a6ab]
4 IOConnectCallMethod + 266 (IOKit) [0x7fff865501b5]
4 io_connect_method + 377 (IOKit) [0x7fff865a96fe]
4 mach_msg_trap + 10 (libsystem_kernel.dylib) [0x7fff8dc3ea1a]
4 <Kernel mode>
20 CGXRunOneServicesPass + 1282 (CoreGraphics) [0x7fff88dc60d7]
20 post_port_data + 228 (CoreGraphics) [0x7fff88dc767b]
20 eventNotificationHandler + 9 (CoreGraphics) [0x7fff88df23d0]
20 CGXRunOneEventPass + 40 (CoreGraphics) [0x7fff88df08d8]
14 CGXGetNextEvent + 524 (CoreGraphics) [0x7fff88e92cf7]
14 CGXFilterEvent + 81 (CoreGraphics) [0x7fff88cf72b0]
14 CGXProcessHIDEvent + 150 (CoreGraphics) [0x7fff88df06a2]
14 CGXFilterEvent + 81 (CoreGraphics) [0x7fff88cf72b0]
5 sPostContinuation + 5180 (CoreGraphics) [0x7fff88df2154]
2 CPXDispatchEvent + 50 (CoreGraphics) [0x7fff88e30e7c]
1 GetFrontProcessRecCheckingEligibility + 85 (CoreGraphics) [0x7fff88b93e91]
1 _LSGetFrontApplicationSeed + 23 (LaunchServices) [0x7fff858bf9e6]
1 LSSharedMemoryPage::CopyForSessionID(LSSessionID, bool) + 175 (LaunchServices) [0x7fff8588ea05]
1 _dispatch_barrier_sync_f_invoke + 39 (libdispatch.dylib) [0x7fff85d97146]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff85d9628d]
1 -[__NSArrayM dealloc] + 400 (CoreFoundation) [0x7fff84667770]
1 GetFrontProcessRecCheckingEligibility + 235 (CoreGraphics) [0x7fff88b93f27]
1 compareApplicationType + 87 (CoreGraphics) [0x7fff88b942cd]
1 _LSGetApplicationInformationSeed + 225 (LaunchServices) [0x7fff859202a0]
1 CFRelease + 81 (CoreFoundation) [0x7fff84654241]
1 CPXDispatchEvent + 1926 (CoreGraphics) [0x7fff88e315d0]
1 _LSPassDownCurrentEventState + 36 (LaunchServices) [0x7fff8591cd48]
1 LSSharedMemoryPage::CopyForSessionID(LSSessionID, bool) + 175 (LaunchServices) [0x7fff8588ea05]
1 _dispatch_barrier_sync_f_invoke + 39 (libdispatch.dylib) [0x7fff85d97146]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff85d9628d]
1 CFNumberCreate + 990 (CoreFoundation) [0x7fff84662fce]
1 CPXDispatchEvent + 1883 (CoreGraphics) [0x7fff88e315a5]
1 CGXPostEventByConnection + 210 (CoreGraphics) [0x7fff88df2bf7]
1 CGXFilterEvent + 55 (CoreGraphics) [0x7fff88cf7296]
1 post_events_after_tap_id + 359 (CoreGraphics) [0x7fff88cf8b05]
1 CGXConnectionForConnectionID + 1 (CoreGraphics) [0x7fff88e11669]
1 CPXDispatchEvent + 693 (CoreGraphics) [0x7fff88e310ff]
4 sPostContinuation + 358 (CoreGraphics) [0x7fff88df0e7e]
4 WSFindWindow + 220 (CoreGraphics) [0x7fff88e76113]
3 CGXIsPointInWindow + 395 (CoreGraphics) [0x7fff88e75f34]
1 CGXIsPointInSurface + 93 (CoreGraphics) [0x7fff88ec17de]
1 CGRegionContainsPoint + 37 (CoreGraphics) [0x7fff88f5b5c7]
1 assert_check_region + 43 (CoreGraphics) [0x7fff88a5e487]
1 CGXIsPointInSurface + 78 (CoreGraphics) [0x7fff88ec17cf]
1 CGXIsPointInSurface + 304 (CoreGraphics) [0x7fff88ec18b1]
1 CARenderContextHitTest + 29 (QuartzCore) [0x7fff8d6fd55c]
1 CA::Render::Context::hit_test(CA::Vec2<double> const&, unsigned int) + 174 (QuartzCore) [0x7fff8d707726]
1 CA::Render::Update::add_context(CA::Render::Context*, CA::Render::Layer*, CA::Transform const*) + 1292 (QuartzCore) [0x7fff8d6a9e60]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4671 (QuartzCore) [0x7fff8d6add03]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4671 (QuartzCore) [0x7fff8d6add03]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4671 (QuartzCore) [0x7fff8d6add03]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4671 (QuartzCore) [0x7fff8d6add03]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4303 (QuartzCore) [0x7fff8d6adb93]
1 CA::Render::Updater::TransformOp::map_bounds(CA::Render::Updater::LayerShapes&) + 191 (QuartzCore) [0x7fff8d6b0cc3]
1 CGXIsPointInWindow + 203 (CoreGraphics) [0x7fff88e75e74]
1 CGXIsPointInScreenContentShapeForWindow + 30 (CoreGraphics) [0x7fff88d62616]
2 sPostContinuation + 1279 (CoreGraphics) [0x7fff88df1217]
1 CGXProcessTrackingArea + 464 (CoreGraphics) [0x7fff88f04aa6]
1 CGRegionContainsPoint + 80 (CoreGraphics) [0x7fff88f5b5f2]
1 shape_contains_point + 157 (CoreGraphics) [0x7fff88cf5ef3]
1 CGXProcessTrackingArea + 1374 (CoreGraphics) [0x7fff88f04e34]
1 CGXIsPointInWindow + 395 (CoreGraphics) [0x7fff88e75f34]
1 CGXIsPointInSurface + 304 (CoreGraphics) [0x7fff88ec18b1]
1 CARenderContextHitTest + 29 (QuartzCore) [0x7fff8d6fd55c]
1 CA::Render::Context::hit_test(CA::Vec2<double> const&, unsigned int) + 174 (QuartzCore) [0x7fff8d707726]
1 CA::Render::Update::add_context(CA::Render::Context*, CA::Render::Layer*, CA::Transform const*) + 1292 (QuartzCore) [0x7fff8d6a9e60]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4671 (QuartzCore) [0x7fff8d6add03]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 4671 (QuartzCore) [0x7fff8d6add03]
1 CA::Render::Updater::prepare_layer(CA::Render::Updater::GlobalState&, CA::Render::Updater::LocalState&, CA::Render::LayerNode*, CA::Render::Updater::LayerShapes&, unsigned int*) + 6332 (QuartzCore) [0x7fff8d6ae380]
1 CA::BoundsImpl::Union(CA::GenericRect<double>&, CA::GenericRect<double> const&) + 189 (QuartzCore) [0x7fff8d6af9ed]
1 sPostContinuation + 1034 (CoreGraphics) [0x7fff88df1122]
1 CGXSetEventWindowHeightForWindow + 6 (CoreGraphics) [0x7fff88df0ac6]
1 sPostContinuation + 984 (CoreGraphics) [0x7fff88df10f0]
1 lockedWindowLookup + 30 (CoreGraphics) [0x7fff88e70529]
1 sPostContinuation + 4943 (CoreGraphics) [0x7fff88df2067]
3 CGXGetNextEvent + 58 (CoreGraphics) [0x7fff88e92b25]
3 CGXForegroundConnection + 14 (CoreGraphics) [0x7fff88e11658]
2 CPXGetFrontProcessesConnectionID + 25 (CoreGraphics) [0x7fff88e2f895]
1 GetFrontProcessRecCheckingEligibility + 235 (CoreGraphics) [0x7fff88b93f27]
1 _LSGetApplicationInformationSeed + 1 (LaunchServices) [0x7fff859201c0]
1 GetFrontProcessRecCheckingEligibility + 85 (CoreGraphics) [0x7fff88b93e91]
1 _LSGetFrontApplicationSeed + 23 (LaunchServices) [0x7fff858bf9e6]
1 LSSharedMemoryPage::CopyForSessionID(LSSessionID, bool) + 175 (LaunchServices) [0x7fff8588ea05]
1 _dispatch_barrier_sync_f_invoke + 39 (libdispatch.dylib) [0x7fff85d97146]
1 _dispatch_client_callout + 8 (libdispatch.dylib) [0x7fff85d9628d]
1 ___ZN18LSSharedMemoryPage16CopyForSessionIDE11LSSessionIDb_block_invoke + 49 (LaunchServices) [0x7fff8588f179]
-
I am the victim of Identity Theft. The perpetrator has taken over as Roaming Administrator of my PC's. I once had 7 of them, but she has stolen/destroyed all but 2. She is taking online classes at college from Microsoft, and puts her class notes on one of the 2 surviving ones, which was returned to me by law enforcement. She has denied me access even to my "My Documents" subdirectory, &, in an ASUS AMD 8-core PC w/16GB of RAM, with a 3D blu-ray DVD reader/writer & 52-memory card reader/writer built in & a 2TB Western Digital eSATA HDD, all of which I designed & built, she has hidden the entire directory tree on the hard drive & rendered all of the other devices disabled so that the system is kaput; all because I was amassing evidence against her for law enforcement & the FTC.
The question at-hand is how I screen-freeze Firefox as it is loading so that I can read the JavaScript she has written at the bottom of the banner. It is something about how she has accessed my Norton Identity Safe Vault, changed the password on me, & shut off & denied me access to my 2 Facebook accounts & others I am not quick enough to read. I need to screen-capture this message for law enforcement, because they STILL, after a year & losing a total of $223,000 from my bank account to her, don't have a case file with them! PLEASE CAN YOU HELP ME! Katrina has actually hired a hit-man whom we have captured on surveillance video trying to shoot me in the head! She has also hacked her way into my router, changed my password & disabled the reset capability of the router so that even my ISP can't reset it! Imagine what YOU could do with $223,000! I am elderly, broke, and have lost almost 250 pounds because of her! If I live long enough, I want to see her in federal prison. If I die, I want her to die by lethal injection in Washington State for First Degree Murder!
FYI...I have used Firefox since its creation. The last time she wiped it off one of my systems & I reinstalled it, she caused it to install in Swedish. She has stolen the keys to all of my paid programs, & the companies now believe they actually belong to her, instead of myself. Norton 360 Premiere thinks I'm an intruder on my own machines, and Symanted has disabled my account, and will not communicate with me anymore. They gave her my Vault with more than 200 usernames and passwords! With GoDaddy, I had 17 non-profit SSL domains, for which I paid in excess of $8,000 to secure for 10 years with 21 email accounts. She obtained my SSN, impersonated me, demanded back the money I had paid, and they sent it to her. She stole the phone on which I had 2-step authentication, and now they won't let me near my accounts! I've had the same Gmail account for 8 years. Google opened up my password-secured YouTube account to 70,000+ strangers and pornography, and, after being LinkedIn's nominee for International Businesswoman of the Year, 2013, Google opened up my Wallet account to 2 other Identity Thieves to make purchases in my name, and they say I don't exist.
Lastly, she has poisoned our indoor spa with bio-terroristic flesh-eating parasites in the form of hybridized, skin-burrowing arthropods that killed our dog, cats, and dozens of birds in our special-needs avian sanctuary. I barely survived an 8-day stay in the hospital in June in, in "grave condition with toxic encephalopathy" because the parasites are immune to all parasiticides, and had crossed my blood-brain barrier. My husband has heart attacks, strokes and seizures constantly from them. I can no longer walk.
It is but one question I have asked, but your answer could be the key to stopping her from destroying what is left of our lives. With that JavaScripted message, she has cut me off from thousands of friends and family who have no idea what has happened to me. I live in a desolate, isolated corner of rural America without so much as phone or text service. All I have is the Internet and Firefox to keep me alive. If I can freeze that message and show it to the Whitman County Sheriff's Office, for whom I am the volunteer computer expert, they will accept their first-ever case of Identity Theft, and pursue her. It's bad enough that I lost the family fortune that my parents worked their whole lives to amass; I've lost my credibility, my self-esteem, and my will to live.
If you can help me, I plan on writing a book about the whole traumatic experience so that innocent others won't have to suffer the devastating nightmares as we have. Ours has been called, by the experts who should know, the worst case of Identity Theft in the history of the crime.
<sub>edit: removed identifiable personal information, since this is against our [[Forum rules and guidelines]] (philipp)</sub>Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through. -
Screen flickering and system freezes when using Nouveau driver.
I'm testing the Nouveau driver on my computer, I really want to keep this driver installed because it makes XFCE to use less resources than the Nvidia proprietary driver. But when I start some apps like firefox or make changes to the desktop, the system stop responding and then the screen breaks.
I can't use the computer in that state so I force a shutdown.
I don't know how to see what is going wrong, because the proprietary driver don't give me these problems, I don't get any errors at dmesg log and Xorg log don't have any helpful information.
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.3-2-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000057feffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000057ff0000-0x0000000057ff2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000057ff3000-0x0000000057ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000058000000-0x000000005fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Acer Aspire T180/EM61SM/EM61PM , BIOS R01-B4 06/15/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x57ff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f3c90-0x000f3c9f] mapped at [c00f3c90]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x373fffff] page 2M
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bfa000-0x01bfffff]
[ 0.000000] RAMDISK: [mem 0x37a46000-0x37d1afff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37529000-0x377fd69f]
[ 0.000000] Move RAMDISK from [mem 0x37a46000-0x37d1a69f] to [mem 0x37529000-0x377fd69f]
[ 0.000000] ACPI: RSDP 000f8370 00014 (v00 ACRSYS)
[ 0.000000] ACPI: RSDT 57ff3040 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 57ff30c0 00074 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 57ff3180 0631A (v01 ACRSYS AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 57ff0000 00040
[ 0.000000] ACPI: SSDT 57ff95c0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 57ff9800 00038 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 57ff9880 00176 (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 57ff9a40 0003C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 57ff9500 0007C (v01 ACRSYS ACRPRDCT 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 519MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x57feffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x57feffff]
[ 0.000000] On node 0 totalpages: 360319
[ 0.000000] free_area_init_node: node 0, pgdat c15ab3c0, node_mem_map f6a28200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1040 pages used for memmap
[ 0.000000] HighMem zone: 132066 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] e820: [mem 0x60000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6a05000 s32640 r0 d20608 u53248
[ 0.000000] pcpu-alloc: s32640 r0 d20608 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357503
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2883328 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00057ff0)
[ 0.000000] Memory: 1415956k/1441728k available (4184k kernel code, 25320k reserved, 1679k data, 560k init, 532424k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15ba000 - 0xc1646000 ( 560 kB)
.data : 0xc141613e - 0xc15b9d80 (1679 kB)
.text : 0xc1000000 - 0xc141613e (4184 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1908.551 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3818.14 BogoMIPS (lpj=6361836)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003404] Security Framework initialized
[ 0.003415] AppArmor: AppArmor disabled by boot time parameter
[ 0.003432] Mount-cache hash table entries: 512
[ 0.006819] Initializing cgroup subsys cpuacct
[ 0.006822] Initializing cgroup subsys memory
[ 0.006834] Initializing cgroup subsys devices
[ 0.006837] Initializing cgroup subsys freezer
[ 0.006840] Initializing cgroup subsys net_cls
[ 0.006842] Initializing cgroup subsys blkio
[ 0.006879] CPU: Physical Processor ID: 0
[ 0.006882] CPU: Processor Core ID: 0
[ 0.006885] mce: CPU supports 5 MCE banks
[ 0.006896] LVT offset 0 assigned for vector 0xf9
[ 0.006902] process: using AMD E400 aware idle routine
[ 0.006911] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
[ 0.007021] Freeing SMP alternatives: 16k freed
[ 0.007977] ACPI: Core revision 20121018
[ 0.015366] ftrace: allocating 18273 entries in 36 pages
[ 0.023490] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024036] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059250] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (fam: 0f, model: 6b, stepping: 01)
[ 0.059999] Performance Events: AMD PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 48
[ 0.059999] ... generic registers: 4
[ 0.059999] ... value mask: 0000ffffffffffff
[ 0.059999] ... max period: 00007fffffffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 000000000000000f
[ 0.078439] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083409] CPU 1 irqstacks, hard=f60ba000 soft=f60bc000
[ 0.083412] smpboot: Booting Node 0, Processors #1 OK
[ 0.006666] Initializing CPU#1
[ 0.176732] Brought up 2 CPUs
[ 0.176736] smpboot: Total of 2 processors activated (7637.24 BogoMIPS)
[ 0.177423] devtmpfs: initialized
[ 0.177423] PM: Registering ACPI NVS region [mem 0x57ff0000-0x57ff2fff] (12288 bytes)
[ 0.178162] RTC time: 21:06:38, date: 03/21/13
[ 0.178225] NET: Registered protocol family 16
[ 0.178397] node 0 link 0: io port [8000, ffff]
[ 0.178401] TOM: 0000000060000000 aka 1536M
[ 0.178404] node 0 link 0: mmio [a0000, bffff]
[ 0.178408] node 0 link 0: mmio [60000000, efffffff]
[ 0.178411] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.178414] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.178418] bus: [bus 00-04] on node 0 link 0
[ 0.178421] bus: 00 [io 0x0000-0xffff]
[ 0.178423] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.178425] bus: 00 [mem 0x60000000-0xf3ffffff]
[ 0.178428] bus: 00 [mem 0xf4000000-0xffffffff]
[ 0.178495] ACPI: bus type pci registered
[ 0.178575] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.178579] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.178581] PCI: Using MMCONFIG for extended config space
[ 0.178583] PCI: Using configuration type 1 for base access
[ 0.178677] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.178679] mtrr: probably your BIOS does not setup all CPUs.
[ 0.178681] mtrr: corrected configuration.
[ 0.180670] bio: create slab <bio-0> at 0
[ 0.180670] ACPI: Added _OSI(Module Device)
[ 0.180670] ACPI: Added _OSI(Processor Device)
[ 0.180670] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180670] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.181260] ACPI: EC: Look up EC in DSDT
[ 0.186070] ACPI: Interpreter enabled
[ 0.186077] ACPI: (supports S0 S3 S4 S5)
[ 0.186098] ACPI: Using IOAPIC for interrupt routing
[ 0.193127] ACPI: No dock devices found.
[ 0.193134] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.193752] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-04])
[ 0.193756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193890] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.193894] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.195031] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
[ 0.195034] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
[ 0.195037] pci_root PNP0A08:00: host bridge window [io 0x8000-0xffff] (ignored)
[ 0.195040] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
[ 0.195044] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.195047] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xefffffff] (ignored)
[ 0.195050] pci_root PNP0A08:00: host bridge window [mem 0xf4000000-0xfe02ffff] (ignored)
[ 0.195053] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored)
[ 0.195057] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470b] (ignored)
[ 0.195060] pci_root PNP0A08:00: host bridge window [io 0x1c00-0x1c80] (ignored)
[ 0.195063] pci_root PNP0A08:00: host bridge window [mem 0xfec80000-0xfecbffff] (ignored)
[ 0.195066] PCI: root bus 00: hardware-probed resources
[ 0.195117] PCI host bridge to bus 0000:00
[ 0.195121] pci_bus 0000:00: root bus resource [bus 00-04]
[ 0.195124] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.195127] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.195130] pci_bus 0000:00: root bus resource [mem 0x60000000-0xf3ffffff]
[ 0.195134] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[ 0.195161] pci 0000:00:00.0: [10de:03ea] type 00 class 0x050000
[ 0.195341] pci 0000:00:01.0: [10de:03e0] type 00 class 0x060100
[ 0.195384] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.195397] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.195414] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.195421] pci 0000:00:01.1: reg 24: [io 0xf400-0xf43f]
[ 0.195452] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.195469] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.195516] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.195527] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.195564] pci 0000:00:02.0: supports D1 D2
[ 0.195567] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195583] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.195595] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.195639] pci 0000:00:02.1: supports D1 D2
[ 0.195642] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.195665] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.195711] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.195723] pci 0000:00:05.0: reg 10: [mem 0xfe028000-0xfe02bfff]
[ 0.195768] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.195791] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.195814] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
[ 0.195850] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.195860] pci 0000:00:08.0: reg 10: [io 0x09f0-0x09f7]
[ 0.195866] pci 0000:00:08.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.195872] pci 0000:00:08.0: reg 18: [io 0x0970-0x0977]
[ 0.195877] pci 0000:00:08.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.195883] pci 0000:00:08.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.195889] pci 0000:00:08.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.195922] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.195932] pci 0000:00:08.1: reg 10: [io 0x09e0-0x09e7]
[ 0.195938] pci 0000:00:08.1: reg 14: [io 0x0be0-0x0be3]
[ 0.195944] pci 0000:00:08.1: reg 18: [io 0x0960-0x0967]
[ 0.195949] pci 0000:00:08.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.195955] pci 0000:00:08.1: reg 20: [io 0xc800-0xc80f]
[ 0.195961] pci 0000:00:08.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.196000] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.196032] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196051] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.196081] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196098] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.196128] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196146] pci 0000:00:0d.0: [10de:03d0] type 00 class 0x030000
[ 0.196154] pci 0000:00:0d.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.196162] pci 0000:00:0d.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.196169] pci 0000:00:0d.0: reg 1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.196177] pci 0000:00:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196209] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.196233] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.196253] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.196273] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.196335] pci 0000:01:09.0: [104c:8024] type 00 class 0x0c0010
[ 0.196350] pci 0000:01:09.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.196359] pci 0000:01:09.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.196412] pci 0000:01:09.0: supports D1 D2
[ 0.196415] pci 0000:01:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.196444] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.196448] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.196452] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.196456] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.196459] pci 0000:00:04.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.196462] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196465] pci 0000:00:04.0: bridge window [mem 0x60000000-0xf3ffffff] (subtractive decode)
[ 0.196469] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[ 0.196493] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.196498] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.196501] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.196506] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.196548] pci 0000:03:00.0: [11ab:4364] type 00 class 0x020000
[ 0.196565] pci 0000:03:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.196575] pci 0000:03:00.0: reg 18: [io 0x9c00-0x9cff]
[ 0.196604] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.196648] pci 0000:03:00.0: supports D1 D2
[ 0.196651] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.203353] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.203357] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.203361] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.203365] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.203390] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.203394] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.203398] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.203402] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.203413] pci_bus 0000:00: on NUMA node 0
[ 0.203424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.203569] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242482] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242536] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242587] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242639] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.242689] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242741] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.242791] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242842] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242894] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 *11 14 15)
[ 0.242944] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242996] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243045] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243098] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.243148] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243204] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
[ 0.243265] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
[ 0.243315] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243375] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.243432] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.243524] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.243606] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.243688] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.243770] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.243851] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.243933] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.244014] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.244095] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.244176] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
[ 0.244258] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.244340] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.244422] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.244504] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.244586] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.244669] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.244751] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.244833] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.244921] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.245004] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.245086] vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.245086] vgaarb: loaded
[ 0.245086] vgaarb: bridge control possible 0000:00:0d.0
[ 0.245086] PCI: Using ACPI for IRQ routing
[ 0.246696] PCI: pci_cache_line_size set to 64 bytes
[ 0.246745] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.246748] e820: reserve RAM buffer [mem 0x57ff0000-0x57ffffff]
[ 0.246902] NetLabel: Initializing
[ 0.246904] NetLabel: domain hash size = 128
[ 0.246906] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246923] NetLabel: unlabeled traffic allowed by default
[ 0.246950] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.246956] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.246961] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.256702] Switching to clocksource hpet
[ 0.264319] pnp: PnP ACPI init
[ 0.264346] ACPI: bus type pnp registered
[ 0.264605] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.264609] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.264613] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.264616] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.264620] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.264623] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.264628] system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.264631] system 00:00: [mem 0xfefe1000-0xfefe10ff] has been reserved
[ 0.264635] system 00:00: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.264641] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265431] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.265434] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.265438] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.265442] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.265458] pnp 00:02: [dma 4]
[ 0.265495] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265606] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.265670] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.265772] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266190] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266522] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.266948] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.267129] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.267201] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.267285] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.267290] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267506] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.267510] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267514] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.267517] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.267521] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.267525] system 00:0d: [mem 0x57ff0000-0x57ffffff] could not be reserved
[ 0.267528] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.267532] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.267535] system 00:0d: [mem 0x00100000-0x57feffff] could not be reserved
[ 0.267539] system 00:0d: [mem 0x58000000-0x5fffffff] has been reserved
[ 0.267543] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267546] system 00:0d: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267550] system 00:0d: [mem 0xfefff000-0xfeffffff] has been reserved
[ 0.267554] system 00:0d: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267557] system 00:0d: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267561] system 00:0d: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267565] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267589] pnp: PnP ACPI: found 14 devices
[ 0.267590] ACPI: ACPI bus type pnp unregistered
[ 0.305593] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6001ffff pref]
[ 0.305599] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.305603] pci 0000:00:04.0: bridge window [io 0xb000-0xbfff]
[ 0.305608] pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.305612] pci 0000:00:04.0: bridge window [mem 0xfd800000-0xfd8fffff pref]
[ 0.305617] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.305621] pci 0000:00:09.0: bridge window [io 0xa000-0xafff]
[ 0.305625] pci 0000:00:09.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.305629] pci 0000:00:09.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305635] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[ 0.305638] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.305641] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.305645] pci 0000:00:0b.0: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.305649] pci 0000:00:0b.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305654] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.305657] pci 0000:00:0c.0: bridge window [io 0x8000-0x8fff]
[ 0.305661] pci 0000:00:0c.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.305665] pci 0000:00:0c.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305677] pci 0000:00:04.0: setting latency timer to 64
[ 0.305686] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.305689] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305692] pci_bus 0000:00: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305696] pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305699] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.305702] pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.305706] pci_bus 0000:01: resource 2 [mem 0xfd800000-0xfd8fffff pref]
[ 0.305709] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.305712] pci_bus 0000:01: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.305715] pci_bus 0000:01: resource 6 [mem 0x60000000-0xf3ffffff]
[ 0.305718] pci_bus 0000:01: resource 7 [mem 0xf4000000-0xffffffff]
[ 0.305722] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.305725] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.305729] pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.305732] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.305735] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.305738] pci_bus 0000:03: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.305742] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.305745] pci_bus 0000:04: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.305748] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 0.305804] NET: Registered protocol family 2
[ 0.305997] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306061] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.306122] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.306184] TCP: reno registered
[ 0.306188] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.306279] NET: Registered protocol family 1
[ 0.306537] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.370181] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.370249] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370299] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370357] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370411] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370469] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370531] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370598] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.370606] pci 0000:00:0d.0: Boot video device
[ 0.370621] PCI: CLS 64 bytes, default 64
[ 0.370687] Unpacking initramfs...
[ 0.455995] Freeing initrd memory: 2900k freed
[ 0.459106] apm: BIOS not found.
[ 0.459448] audit: initializing netlink socket (disabled)
[ 0.459468] type=2000 audit(1363899998.456:1): initialized
[ 0.474029] bounce pool size: 64 pages
[ 0.474052] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.476263] VFS: Disk quotas dquot_6.5.2
[ 0.476327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476593] msgmni has been set to 1731
[ 0.476998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.477042] io scheduler noop registered
[ 0.477044] io scheduler deadline registered
[ 0.477053] io scheduler cfq registered (default)
[ 0.477195] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 0.477269] pcieport 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 0.477329] pcieport 0000:00:0c.0: irq 42 for MSI/MSI-X
[ 0.477469] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.477471] vesafb: scrolling: redraw
[ 0.477474] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.477558] vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1216k, total 1216k
[ 0.484141] Console: switching to colour frame buffer device 80x30
[ 0.490611] fb0: VESA VGA frame buffer device
[ 0.490704] GHES: HEST is not enabled!
[ 0.490719] isapnp: Scanning for PnP cards...
[ 0.802592] isapnp: No Plug & Play device found
[ 0.802671] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.823231] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.843779] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.844469] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.844915] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844951] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.845087] mousedev: PS/2 mouse device common for all mice
[ 0.845182] rtc_cmos 00:04: RTC can wake from S4
[ 0.845358] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.845400] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.845435] cpuidle: using governor ladder
[ 0.845437] cpuidle: using governor menu
[ 0.845439] EFI Variables Facility v0.08 2004-May-17
[ 0.845489] drop_monitor: Initializing network drop monitor service
[ 0.845593] TCP: cubic registered
[ 0.845736] NET: Registered protocol family 10
[ 0.845940] NET: Registered protocol family 17
[ 0.845958] Key type dns_resolver registered
[ 0.846129] Using IPI No-Shortcut mode
[ 0.846264] PM: Hibernation image not present or could not be loaded.
[ 0.846279] registered taskstats version 1
[ 0.846851] Magic number: 5:851:146
[ 0.846912] acpi device:17: hash matches
[ 0.846972] rtc_cmos 00:04: setting system clock to 2013-03-21 21:06:39 UTC (1363899999)
[ 0.847246] Freeing unused kernel memory: 560k freed
[ 0.847645] Write protecting the kernel text: 4188k
[ 0.847679] Write protecting the kernel read-only data: 1284k
[ 0.858078] systemd-udevd[45]: starting version 198
[ 0.864682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.904637] ACPI: bus type usb registered
[ 0.904681] usbcore: registered new interface driver usbfs
[ 0.904697] usbcore: registered new interface driver hub
[ 0.904815] usbcore: registered new device driver usb
[ 0.906826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.908458] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908536] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.908541] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.908550] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.908594] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 0.910252] ehci-pci: EHCI PCI platform driver
[ 0.910290] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.910329] firewire_ohci 0000:01:09.0: setting latency timer to 64
[ 0.912040] SCSI subsystem initialized
[ 0.915768] ACPI: bus type scsi registered
[ 0.918637] libata version 3.00 loaded.
[ 0.962268] hub 1-0:1.0: USB hub found
[ 0.962279] hub 1-0:1.0: 10 ports detected
[ 0.962535] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 0.962539] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.962547] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 0.962559] ehci-pci 0000:00:02.1: debug port 1
[ 0.962589] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.962617] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 0.970035] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.970261] hub 2-0:1.0: USB hub found
[ 0.970268] hub 2-0:1.0: 10 ports detected
[ 0.970681] pata_amd 0000:00:06.0: version 0.4.1
[ 0.970736] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.971618] scsi0 : pata_amd
[ 0.972200] scsi1 : pata_amd
[ 0.972449] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.972452] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.972517] sata_nv 0000:00:08.0: version 3.5
[ 0.972721] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.972802] sata_nv 0000:00:08.0: setting latency timer to 64
[ 0.973161] scsi2 : sata_nv
[ 0.973470] scsi3 : sata_nv
[ 0.973598] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[ 0.973602] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[ 0.973822] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.973886] sata_nv 0000:00:08.1: setting latency timer to 64
[ 0.974209] scsi4 : sata_nv
[ 0.974369] scsi5 : sata_nv
[ 0.974488] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
[ 0.974491] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
[ 1.130346] ata1.00: ATAPI: HL-DT-ST DVDRAM_GSA-H40N, RA00, max UDMA/66
[ 1.130357] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
[ 1.143604] ata1.00: configured for UDMA/66
[ 1.149515] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM_GSA-H40N RA00 PQ: 0 ANSI: 5
[ 1.149876] ata2: port disabled--ignoring
[ 1.297028] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.297032] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.633688] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.643352] firewire_ohci 0000:01:09.0: failed to read phy reg
[ 1.643576] firewire_ohci: probe of 0000:01:09.0 failed with error -16
[ 1.730033] usb 1-4: new low-speed USB device number 2 using ohci_hcd
[ 1.936808] usbcore: registered new interface driver usbhid
[ 1.936814] usbhid: USB HID core driver
[ 2.100049] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.107021] ata6.00: ATA-7: Hitachi HDS721616PLA380, P22OAB3A, max UDMA/133
[ 2.107025] ata6.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.120325] ata6.00: configured for UDMA/133
[ 2.120524] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
[ 2.125055] sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 2.125119] sd 5:0:0:0: [sda] Write Protect is off
[ 2.125123] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.125149] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.131113] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.131120] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.131457] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.146217] sda: sda1 sda2 sda3
[ 2.146831] sd 5:0:0:0: [sda] Attached SCSI disk
[ 2.206694] usb 1-8: new full-speed USB device number 3 using ohci_hcd
[ 2.407819] Initializing USB Mass Storage driver...
[ 2.408184] scsi6 : usb-storage 1-8:1.0
[ 2.408335] usbcore: registered new interface driver usb-storage
[ 2.408337] USB Mass Storage support registered.
[ 2.542664] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.014632] systemd[1]: Smack is not enabled in the kernel, not loading access rules.
[ 3.097131] systemd[1]: systemd 198 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.097800] systemd[1]: Set hostname to <acer-aspire>.
[ 3.352860] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.352959] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.352983] systemd[1]: Expecting device sys-subsystem-net-devices-enp3s0.device...
[ 3.353005] systemd[1]: Starting Remote File Systems.
[ 3.353024] systemd[1]: Reached target Remote File Systems.
[ 3.353041] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.353091] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.353108] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.353156] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.353173] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.353206] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.353222] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.353253] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.353274] systemd[1]: Starting Journal Socket.
[ 3.353366] systemd[1]: Listening on Journal Socket.
[ 3.354821] systemd[1]: Starting Apply Kernel Variables...
[ 3.357143] systemd[1]: Mounting Huge Pages File System...
[ 3.363518] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.370154] systemd[1]: Mounting Debug File System...
[ 3.385832] systemd[1]: Starting Journal Service...
[ 3.393610] systemd[1]: Started Journal Service.
[ 3.393800] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.393975] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.407359] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.407389] systemd[1]: Starting Encrypted Volumes.
[ 3.407409] systemd[1]: Reached target Encrypted Volumes.
[ 3.407431] systemd[1]: Starting Setup Virtual Console...
[ 3.410492] systemd[1]: Starting udev Kernel Socket.
[ 3.410553] systemd[1]: Listening on udev Kernel Socket.
[ 3.410641] systemd[1]: Starting udev Control Socket.
[ 3.410689] systemd[1]: Listening on udev Control Socket.
[ 3.410760] systemd[1]: Starting udev Coldplug all Devices...
[ 3.417037] systemd[1]: Starting udev Kernel Device Manager...
[ 3.418761] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.436758] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.441505] systemd[1]: Started Load Kernel Modules.
[ 3.441546] systemd[1]: Mounted FUSE Control File System.
[ 3.441570] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.441652] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.441693] systemd[1]: Mounting Configuration File System...
[ 3.465751] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.476732] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.505747] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.516728] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.549724] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.553823] systemd[1]: Expecting device dev-disk-by\x2duuid-bb5a3cc3\x2d55fd\x2d4830\x2d8177\x2ddd32df9bd303.device...
[ 3.553856] systemd[1]: Mounting Temporary Directory...
[ 3.571730] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.744908] systemd-udevd[126]: starting version 198
[ 3.777101] systemd[1]: Started File System Check on Root Device.
[ 3.777142] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.790819] systemd[1]: Started udev Kernel Device Manager.
[ 3.800185] systemd[1]: Started Apply Kernel Variables.
[ 4.118718] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 4.205364] systemd-journald[122]: Received SIGUSR1
[ 5.423026] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.423033] ACPI: Thermal Zone [THRM] (40 C)
[ 5.463049] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 5.484558] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.484570] ACPI: Power Button [PWRB]
[ 5.484693] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.484697] ACPI: Power Button [PWRF]
[ 5.491085] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.542488] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 5.542524] i2c i2c-1: nForce2 SMBus adapter at 0xf400
[ 5.547898] Linux agpgart interface v0.103
[ 5.558914] ACPI: Fan [FAN] (on)
[ 5.559089] [drm] Initialized drm 1.1.0 20060810
[ 5.565468] microcode: AMD CPU family 0xf not supported
[ 5.567533] microcode: AMD CPU family 0xf not supported
[ 5.642735] wmi: Mapper loaded
[ 5.645076] kvm: Nested Virtualization enabled
[ 5.649689] powernow-k8: fid 0xb (1900 MHz), vid 0xc
[ 5.649696] powernow-k8: fid 0xa (1800 MHz), vid 0xd
[ 5.649699] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.649987] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (2 cpu cores) (version 2.20.00)
[ 5.685561] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 5.685568] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 5.685594] Console: switching to colour dummy device 80x25
[ 5.685773] nouveau 0000:00:0d.0: setting latency timer to 64
[ 5.686326] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 5.686707] nouveau [ DEVICE][0000:00:0d.0] BOOT0 : 0x04c000a2
[ 5.686715] nouveau [ DEVICE][0000:00:0d.0] Chipset: C61 (NV4C)
[ 5.686722] nouveau [ DEVICE][0000:00:0d.0] Family : NV40
[ 5.687642] nouveau [ VBIOS][0000:00:0d.0] checking PRAMIN for image...
[ 5.733281] nouveau [ VBIOS][0000:00:0d.0] ... appears to be valid
[ 5.733287] nouveau [ VBIOS][0000:00:0d.0] using image from PRAMIN
[ 5.733560] nouveau [ VBIOS][0000:00:0d.0] BIT signature found
[ 5.733565] nouveau [ VBIOS][0000:00:0d.0] version 05.61.32.25.04
[ 5.733746] nouveau [ PFB][0000:00:0d.0] RAM type: unknown
[ 5.733749] nouveau [ PFB][0000:00:0d.0] RAM size: 128 MiB
[ 5.733752] nouveau [ PFB][0000:00:0d.0] ZCOMP: 0 tags
[ 5.761373] [TTM] Zone kernel: Available graphics memory: 443504 kiB
[ 5.761379] [TTM] Zone highmem: Available graphics memory: 709716 kiB
[ 5.761381] [TTM] Initializing pool allocator
[ 5.761831] nouveau [ DRM] VRAM: 125 MiB
[ 5.761838] nouveau [ DRM] GART: 512 MiB
[ 5.761844] nouveau [ DRM] BIT BIOS found
[ 5.761848] nouveau [ DRM] Bios version 05.61.32.25
[ 5.761852] nouveau [ DRM] TMDS table version 1.1
[ 5.761855] nouveau [ DRM] DCB version 3.0
[ 5.761859] nouveau [ DRM] DCB outp 00: 01000310 00000023
[ 5.761863] nouveau [ DRM] DCB outp 01: 00110204 98830003
[ 5.761865] nouveau [ DRM] DCB conn 00: 0000
[ 5.761869] nouveau [ DRM] DCB conn 01: 1131
[ 5.761872] nouveau [ DRM] DCB conn 02: 0110
[ 5.761875] nouveau [ DRM] DCB conn 03: 0111
[ 5.761877] nouveau [ DRM] DCB conn 04: 0113
[ 5.762420] nouveau W[ DRM] DCB type 4 not known
[ 5.762425] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 5.763281] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.763283] [drm] No driver support for vblank timestamp query.
[ 5.763931] nouveau [ DRM] 1 available performance level(s)
[ 5.763937] nouveau [ DRM] 0: core 425MHz shader 425MHz fanspeed 100%
[ 5.763939] nouveau [ DRM] c:
[ 5.765435] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.811870] sky2: driver version 1.30
[ 5.812122] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 5.812188] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 2
[ 5.812268] sky2 0000:03:00.0: irq 43 for MSI/MSI-X
[ 5.812560] sky2 0000:03:00.0 eth0: addr 00:19:21:28:95:2d
[ 5.814804] composite sync not supported
[ 5.815267] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f63fa000
[ 5.815425] fbcon: nouveaufb (fb0) is primary device
[ 5.829143] IT8726 SuperIO detected.
[ 5.829405] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.829453] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.856121] ppdev: user-space parallel port driver
[ 5.877128] Console: switching to colour frame buffer device 180x56
[ 5.878923] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 5.878929] nouveau 0000:00:0d.0: registered panic notifier
[ 5.878952] [drm] Initialized nouveau 1.1.0 20120801 for 0000:00:0d.0 on minor 0
[ 5.879707] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 5.879730] hda_intel: Disabling MSI
[ 5.879786] snd_hda_intel 0000:00:05.0: setting latency timer to 64
[ 6.023710] systemd-udevd[151]: renamed network interface eth0 to enp3s0
[ 6.497697] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input4
[ 6.498447] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 6.533068] Adding 997756k swap on /dev/sda3. Priority:-1 extents:1 across:997756k
[ 6.633135] sky2 0000:03:00.0 enp3s0: enabling interface
[ 6.633209] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.846889] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5
[ 7.603865] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 7.604089] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 7.604265] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 7.604442] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 7.604616] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.604791] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
[ 7.604969] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
[ 7.605141] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:05.0/sound/card0/input13
[ 8.208529] composite sync not supported
[ 8.244451] composite sync not supported
[ 8.450333] sky2 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex, flow control both
[ 8.450367] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 20.811802] composite sync not supported
[ 23.142014] EXT4-fs (sda2): re-mounted. Opts: data=ordered,commit=0
[ 84.047784] usb 1-4: USB disconnect, device number 2
[ 85.606696] usb 1-4: new low-speed USB device number 4 using ohci_hcd
[ 85.814008] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-4/1-4:1.0/input/input14
[ 85.814445] hid-generic 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-4/input0
[ 389.250323] composite sync not supported
Xorg log:
[ 7.949]
X.Org X Server 1.14.0
Release Date: 2013-03-05
[ 7.949] X Protocol Version 11, Revision 0
[ 7.949] Build Operating System: Linux 3.8.2-1-ARCH i686
[ 7.949] Current Operating System: Linux acer-aspire 3.8.3-2-ARCH #1 SMP PREEMPT Sun Mar 17 13:38:16 CET 2013 i686
[ 7.949] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=bb82c8c9-614f-4ce3-85f2-3597507c391d ro quiet
[ 7.949] Build Date: 09 March 2013 11:46:22AM
[ 7.949]
[ 7.949] Current version of pixman: 0.28.2
[ 7.949] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.949] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.949] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 21 15:06:46 2013
[ 7.988] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 8.001] (==) No Layout section. Using the first Screen section.
[ 8.001] (==) No screen section available. Using defaults.
[ 8.001] (**) |-->Screen "Default Screen Section" (0)
[ 8.001] (**) | |-->Monitor "<default monitor>"
[ 8.011] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 8.011] (==) Automatically adding devices
[ 8.011] (==) Automatically enabling devices
[ 8.011] (==) Automatically adding GPU devices
[ 8.060] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 8.060] Entry deleted from font path.
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 8.060] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 8.060] Entry deleted from font path.
[ 8.060] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 8.060] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 8.060] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 8.060] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 8.069] (II) Loader magic: 0x825b620
[ 8.069] (II) Module ABI versions:
[ 8.069] X.Org ANSI C Emulation: 0.4
[ 8.069] X.Org Video Driver: 14.1
[ 8.069] X.Org XInput driver : 19.1
[ 8.069] X.Org Server Extension : 7.0
[ 8.069] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 8.072] (--) PCI:*(0:0:13:0) 10de:03d0:1019:2601 rev 162, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 8.073] Initializing built-in extension Generic Event Extension
[ 8.073] Initializing built-in extension SHAPE
[ 8.073] Initializing built-in extension MIT-SHM
[ 8.073] Initializing built-in extension XInputExtension
[ 8.073] Initializing built-in extension XTEST
[ 8.073] Initializing built-in extension BIG-REQUESTS
[ 8.073] Initializing built-in extension SYNC
[ 8.073] Initializing built-in extension XKEYBOARD
[ 8.073] Initializing built-in extension XC-MISC
[ 8.073] Initializing built-in extension SECURITY
[ 8.073] Initializing built-in extension XINERAMA
[ 8.073] Initializing built-in extension XFIXES
[ 8.073] Initializing built-in extension RENDER
[ 8.073] Initializing built-in extension RANDR
[ 8.073] Initializing built-in extension COMPOSITE
[ 8.073] Initializing built-in extension DAMAGE
[ 8.073] Initializing built-in extension MIT-SCREEN-SAVER
[ 8.073] Initializing built-in extension DOUBLE-BUFFER
[ 8.073] Initializing built-in extension RECORD
[ 8.073] Initializing built-in extension DPMS
[ 8.073] Initializing built-in extension X-Resource
[ 8.073] Initializing built-in extension XVideo
[ 8.073] Initializing built-in extension XVideo-MotionCompensation
[ 8.073] Initializing built-in extension XFree86-VidModeExtension
[ 8.073] Initializing built-in extension XFree86-DGA
[ 8.073] Initializing built-in extension XFree86-DRI
[ 8.073] Initializing built-in extension DRI2
[ 8.073] (II) LoadModule: "glx"
[ 8.099] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 8.133] (II) Module glx: vendor="X.Org Foundation"
[ 8.133] compiled for 1.14.0, module version = 1.0.0
[ 8.133] ABI class: X.Org Server Extension, version 7.0
[ 8.133] (==) AIGLX enabled
[ 8.134] Loading extension GLX
[ 8.134] (==) Matched nouveau as autoconfigured driver 0
[ 8.134] (==) Matched nvidia as autoconfigured driver 1
[ 8.134] (==) Matched nv as autoconfigured driver 2
[ 8.134] (==) Matched nouveau as autoconfigured driver 3
[ 8.134] (==) Matched nvidia as autoconfigured driver 4
[ 8.134] (==) Matched nv as autoconfigured driver 5
[ 8.134] (==) Matched vesa as autoconfigured driver 6
[ 8.134] (==) Matched modesetting as autoconfigured driver 7
[ 8.134] (==) Matched fbdev as autoconfigured driver 8
[ 8.134] (==) Assigned the driver to the xf86ConfigLayout
[ 8.134] (II) LoadModule: "nouveau"
[ 8.134] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 8.154] (II) Module nouveau: vendor="X.Org Foundation"
[ 8.154] compiled for 1.14.0, module version = 1.0.6
[ 8.154] Module class: X.Org Video Driver
[ 8.154] ABI class: X.Org Video Driver, version 14.1
[ 8.154] (II) LoadModule: "nvidia"
[ 8.155] (WW) Warning, couldn't open module nvidia
[ 8.155] (II) UnloadModule: "nvidia"
[ 8.155] (II) Unloading nvidia
[ 8.155] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 8.155] (II) LoadModule: "nv"
[ 8.155] (WW) Warning, couldn't open module nv
[ 8.155] (II) UnloadModule: "nv"
[ 8.155] (II) Unloading nv
[ 8.155] (EE) Failed to load module "nv" (module does not exist, 0)
[ 8.155] (II) LoadModule: "vesa"
[ 8.156] (WW) Warning, couldn't open module vesa
[ 8.156] (II) UnloadModule: "vesa"
[ 8.156] (II) Unloading vesa
[ 8.156] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 8.156] (II) LoadModule: "modesetting"
[ 8.156] (WW) Warning, couldn't open module modesetting
[ 8.156] (II) UnloadModule: "modesetting"
[ 8.156] (II) Unloading modesetting
[ 8.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 8.157] (II) LoadModule: "fbdev"
[ 8.157] (WW) Warning, couldn't open module fbdev
[ 8.157] (II) UnloadModule: "fbdev"
[ 8.157] (II) Unloading fbdev
[ 8.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 8.157] (II) NOUVEAU driver
[ 8.157] (II) NOUVEAU driver for NVIDIA chipset families :
[ 8.157] RIVA TNT (NV04)
[ 8.157] RIVA TNT2 (NV05)
[ 8.157] GeForce 256 (NV10)
[ 8.157] GeForce 2 (NV11, NV15)
[ 8.157] GeForce 4MX (NV17, NV18)
[ 8.157] GeForce 3 (NV20)
[ 8.158] GeForce 4Ti (NV25, NV28)
[ 8.158] GeForce FX (NV3x)
[ 8.158] GeForce 6 (NV4x)
[ 8.158] GeForce 7 (G7x)
[ 8.158] GeForce 8 (G8x)
[ 8.158] GeForce GTX 200 (NVA0)
[ 8.158] GeForce GTX 400 (NVC0)
[ 8.158] (++) using VT number 7
[ 8.175] (II) [drm] nouveau interface version: 1.1.0
[ 8.175] (II) Loading sub module "dri"
[ 8.175] (II) LoadModule: "dri"
[ 8.175] (II) Module "dri" already built-in
[ 8.175] (II) NOUVEAU(0): Loaded DRI module
[ 8.175] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 8.175] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 8.175] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 8.175] (==) NOUVEAU(0): RGB weight 888
[ 8.175] (==) NOUVEAU(0): Default visual is TrueColor
[ 8.175] (==) NOUVEAU(0): Using HW cursor
[ 8.175] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 8.175] (==) NOUVEAU(0): Page flipping enabled
[ 8.175] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 8.208] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 8.244] (II) NOUVEAU(0): EDID for output VGA-1
[ 8.244] (II) NOUVEAU(0): Manufacturer: ACR Model: ada8 Serial#: 1937803344
[ 8.244] (II) NOUVEAU(0): Year: 2007 Week: 38
[ 8.244] (II) NOUVEAU(0): EDID Version: 1.3
[ 8.244] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 8.244] (II) NOUVEAU(0): Sync: Separate Composite
[ 8.244] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 37 vert.: 23
[ 8.245] (II) NOUVEAU(0): Gamma: 2.20
[ 8.245] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 8.245] (II) NOUVEAU(0): Default color space is primary color space
[ 8.245] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 8.245] (II) NOUVEAU(0): redX: 0.590 redY: 0.349 greenX: 0.328 greenY: 0.547
[ 8.245] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.138 whiteX: 0.313 whiteY: 0.329
[ 8.245] (II) NOUVEAU(0): Supported established timings:
[ 8.245] (II) NOUVEAU(0): 720x400@70Hz
[ 8.245] (II) NOUVEAU(0): 640x480@60Hz
[ 8.245] (II) NOUVEAU(0): 640x480@67Hz
[ 8.245] (II) NOUVEAU(0): 640x480@72Hz
[ 8.245] (II) NOUVEAU(0): 640x480@75Hz
[ 8.245] (II) NOUVEAU(0): 800x600@56Hz
[ 8.245] (II) NOUVEAU(0): 800x600@60Hz
[ 8.245] (II) NOUVEAU(0): 800x600@72Hz
[ 8.245] (II) NOUVEAU(0): 800x600@75Hz
[ 8.245] (II) NOUVEAU(0): 832x624@75Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@60Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@70Hz
[ 8.245] (II) NOUVEAU(0): 1024x768@75Hz
[ 8.245] (II) NOUVEAU(0): 1152x864@75Hz
[ 8.245] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 8.245] (II) NOUVEAU(0): Supported standard timings:
[ 8.245] (II) NOUVEAU(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 8.245] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 8.245] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 8.245] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 8.245] (II) NOUVEAU(0): Supported detailed timing:
[ 8.245] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 367 x 229 mm
[ 8.245] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 8.245] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 8.245] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 215 MHz
[ 8.245] (II) NOUVEAU(0): Monitor name: Acer AL1716W
[ 8.245] (II) NOUVEAU(0): Serial No: LA8040344303
[ 8.245] (II) NOUVEAU(0): EDID (in hex):
[ 8.245] (II) NOUVEAU(0): 00ffffffffffff000472a8ad50888073
[ 8.245] (II) NOUVEAU(0): 261101036c251778ee10d59759548c27
[ 8.246] (II) NOUVEAU(0): 235054bfee8081c0810f9500950f0101
[ 8.246] (II) NOUVEAU(0): 0101010101019a29a0d0518422305098
[ 8.246] (II) NOUVEAU(0): 36006fe510000006000000fd00384c1f
[ 8.246] (II) NOUVEAU(0): 5315000a202020202020000000fc0041
[ 8.246] (II) NOUVEAU(0): 63657220414c31373136570a000000ff
[ 8.246] (II) NOUVEAU(0): 004c41383034303334343330330a00aa
[ 8.246] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 +hsync +vsync (55.9 kHz eP)
[ 8.246] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 8.246] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42) -
My iMac has been sluggish for a long time; finally got around to posting here for help!
I've tried using Onyx to clean it up and it helped a little, but it seems as if everything freezes up and forget about mail; I use apple mail with gmail (google docs) and it is constantly indexing, etc. I need to use the web browser to answer email and it's just not what I want from apple.
Please help!
Thanks
Here is the EtreCheck results:
EtreCheck version: 1.9.15 (52)
Report generated October 7, 2014 at 1:12:49 PM PDT
Hardware Information: ?
iMac (27-inch, Mid 2011) (Verified)
iMac - model: iMac12,2
1 2.7 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 2560 x 1440
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:38:12
Disk Information: ?
ST31000528AS disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (739.18 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital My Passport 07B8 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted>: 209.7 MB
My Passport for Mac (disk1s2) /Volumes/My Passport for Mac: 999.83 GB (663.13 GB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.leapfrog.driver.LfConnectDriver (1.0.1) Support
[not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) Support
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) Support
[not loaded] com.wdc.driver.IOFireWireWDHID (1.1.2) Support
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) Support
Startup Items: ?
EasyProject: Path: /Library/StartupItems/EasyProject
Parallels: Path: /Library/StartupItems/Parallels
RetroRun: Path: /Library/StartupItems/RetroRun
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.xackup.insync.ipcfsevents.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.marketcircle.daylite.dlbackuppersonal.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ?
AirPort Base Station Agent
Dropbox
WDDriveUtilityHelper
WDSecurityHelper
Internet Plug-ins: ?
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.4.2.18903 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
AdobePDFViewer: Version: 10.1.12 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
DirectorShockwave: Version: 12.1.1r151 - SDK 10.6 Support
Safari Extensions: ?
YouTube5
TrueNew(TM) Count for Gmail and Google Apps
1-ClickWeather-1
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins ?
WebEx64: Version: 1.0 Support
Picasa: Version: 1.0 Support
WebEx: Version: 1.0 Support
3rd Party Preference Panes: ?
Déjà Vu Support
Flash Player Support
Growl Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 242.30 GB
Destinations:
Time Machine Backups [Local]
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 242.30 GB X 3)
My Passport for Mac [Local] (Last used)
Total size: 931.16 GB
Total number of backups: 68
Oldest backup: 2014-04-18 01:53:32 +0000
Last backup: 2014-10-07 19:02:03 +0000
Size of backup disk: Adequate
Backup size 931.16 GB > (Disk used 242.30 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
3% WindowServer
3% Mail
1% mds_stores
1% ocspd
0% Google Chrome
Top Processes by Memory: ?
184 MB Finder
102 MB Safari
98 MB Mail
78 MB Google Chrome
70 MB mds_stores
Virtual Memory Information: ?
46 MB Free RAM
1.29 GB Active RAM
1.26 GB Inactive RAM
871 MB Wired RAM
976 MB Page-ins
35 MB Page-outsThanks; this is from the all messages window:
10/7/14 1:11:41.714 PM quicklookd[449]: objc[449]: Class TSUMutableNumberFormat is implemented in both /Library/QuickLook/iWork.qlgenerator/Contents/MacOS/iWork and /System/Library/PrivateFrameworks/OfficeImport.framework/Versions/A/OfficeImpor t. One of the two will be used. Which one is undefined.
10/7/14 1:11:41.714 PM quicklookd[449]: objc[449]: Class TSDBezierPath is implemented in both /Library/QuickLook/iWork.qlgenerator/Contents/MacOS/iWork and /System/Library/PrivateFrameworks/OfficeImport.framework/Versions/A/OfficeImpor t. One of the two will be used. Which one is undefined.
10/7/14 1:11:41.714 PM quicklookd[449]: objc[449]: Class TSUBundleLookupClass is implemented in both /Library/QuickLook/iWork.qlgenerator/Contents/MacOS/iWork and /System/Library/PrivateFrameworks/OfficeImport.framework/Versions/A/OfficeImpor t. One of the two will be used. Which one is undefined.
10/7/14 1:11:48.904 PM com.apple.IconServicesAgent[231]: main Failed to composit image for binding VariantBinding [0x339] flags: 0x8 binding: FileInfoBinding [0x155] - extension: wav, UTI: com.microsoft.waveform-audio, fileType: ????.
10/7/14 1:11:48.904 PM quicklookd[449]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x803] flags: 0x8 binding: FileInfoBinding [0x703] - extension: wav, UTI: com.microsoft.waveform-audio, fileType: ???? request size:16 scale: 1
10/7/14 1:11:59.194 PM WindowServer[92]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
10/7/14 1:12:01.359 PM WindowServer[92]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 3.17 seconds (server forcibly re-enabled them after 1.00 seconds)
10/7/14 1:12:06.876 PM com.apple.IconServicesAgent[231]: main Failed to composit image for binding VariantBinding [0x367] flags: 0x8 binding: FileInfoBinding [0x183] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: ????.
10/7/14 1:12:06.930 PM quicklookd[465]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: docx, UTI: org.openxmlformats.wordprocessingml.document, fileType: ???? request size:91 scale: 1
10/7/14 1:12:31.844 PM com.apple.SecurityServer[26]: Session 100018 created
10/7/14 1:12:33.249 PM com.apple.SecurityServer[26]: Killing auth hosts
10/7/14 1:12:33.249 PM com.apple.SecurityServer[26]: Session 100017 destroyed
10/7/14 1:13:46.332 PM osascript[525]: Performance: Please update this scripting addition to supply a value for ThreadSafe for each event handler: "/Library/ScriptingAdditions/Insync.osax"
10/7/14 1:13:50.487 PM System Events[526]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
10/7/14 1:13:50.488 PM System Events[526]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
10/7/14 1:22:26.914 PM apsd[61]: Unrecognized leaf certificate
10/7/14 1:22:30.000 PM kernel[0]: process Google Chrome[362] caught causing excessive wakeups. Observed wakeups rate (per sec): 155; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 149576
10/7/14 1:22:30.733 PM ReportCrash[563]: Invoking spindump for pid=362 wakeups_rate=155 duration=291 because of excessive wakeups
10/7/14 1:22:31.519 PM com.apple.SecurityServer[26]: Session 100019 created
10/7/14 1:22:47.793 PM spindump[564]: Saved wakeups_resource.spin report for Google Chrome version 37.0.2062.124 (2062.124) to /Library/Logs/DiagnosticReports/Google Chrome_2014-10-07-132247_Alans-iMac.wakeups_resource.spin
10/7/14 1:24:07.367 PM com.apple.SecurityServer[26]: Session 100020 created
10/7/14 1:24:20.214 PM xpcproxy[573]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
10/7/14 1:27:12.943 PM CalendarAgent[198]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=503 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 503.)" UserInfo=0x7f8c324589f0 Account name .. , CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7f8c3240aec0 [0x7fff76463f00]>{type = immutable dict, count = 12,
entries =>
0 : Content-Type = <CFString 0x7f8c326fab50 [0x7fff76463f00]>{contents = "application/vnd.google.gdata.error+xml; charset=UTF-8"}
4 : Alternate-Protocol = <CFString 0x7f8c3261ea70 [0x7fff76463f00]>{contents = "443:quic,p=0.01"}
5 : Content-Encoding = <CFString 0x7f8c326ef9b0 [0x7fff76463f00]>{contents = "gzip"}
6 : Server = <CFString 0x7f8c326edbe0 [0x7fff76463f00]>{contents = "GSE"}
7 : X-XSS-Protection = <CFString 0x7f8c326d3bf0 [0x7fff76463f00]>{contents = "1; mode=block"}
8 : Expires = <CFString 0x7f8c326de6a0 [0x7fff76463f00]>{contents = "Tue, 07 Oct 2014 20:27:12 GMT"}
9 : Transfer-Encoding = <CFString 0x7fff7694eea0 [0x7fff76463f00]>{contents = "Identity"}
12 : Cache-Control = <CFString 0x7f8c326e99c0 [0x7fff76463f00]>{contents = "private, max-age=0"}
13 : Date = <CFString 0x7f8c326da3c0 [0x7fff76463f00]>{contents = "Tue, 07 Oct 2014 20:27:12 GMT"}
19 : X-Content-Type-Options = <CFString 0x7f8c32613d90 [0x7fff76463f00]>{contents = "nosniff"}
21 : X-Frame-Options = <CFString 0x7f8c326b7ab0 [0x7fff76463f00]>{contents = "SAMEORIGIN"}
22 : Vary = <CFString 0x7f8c326f2d00 [0x7fff76463f00]>{contents = "Origin, Referer, X-Origin"}
10/7/14 1:32:33.126 PM com.apple.backupd[583]: Starting automatic backup
10/7/14 1:32:33.128 PM com.apple.backupd[583]: Destination Time Machine Backups could not be found (url: (null) destinationID: 1A41CF64-9EB9-4452-9C68-7FD1D4AA0CDC)
10/7/14 1:32:33.129 PM com.apple.backupd[583]: Backup failed with error 18: The backup disk could not be found.
10/7/14 1:32:33.201 PM com.apple.backupd[583]: Starting automatic backup
10/7/14 1:32:40.102 PM com.apple.backupd[583]: Backing up to /dev/disk1s2: /Volumes/My Passport for Mac/Backups.backupdb
10/7/14 1:32:53.542 PM com.apple.backupd[583]: Will copy (34.7 MB) from Macintosh HD
10/7/14 1:32:53.589 PM com.apple.backupd[583]: Found 833 files (37.6 MB) needing backup
10/7/14 1:32:53.604 PM com.apple.backupd[583]: 3.5 GB required (including padding), 663.13 GB available
10/7/14 1:34:34.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=603[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
10/7/14 1:34:51.449 PM com.apple.backupd[583]: Copied 1017 items (37.5 MB) from volume Macintosh HD. Linked 7495.
10/7/14 1:34:54.765 PM com.apple.backupd[583]: Will copy (124 KB) from Macintosh HD
10/7/14 1:34:54.766 PM com.apple.backupd[583]: Found 32 files (124 KB) needing backup
10/7/14 1:34:54.766 PM com.apple.backupd[583]: 3.46 GB required (including padding), 663.09 GB available
10/7/14 1:34:58.371 PM com.apple.backupd[583]: Copied 65 items (125 KB) from volume Macintosh HD. Linked 764.
10/7/14 1:34:59.804 PM com.apple.backupd[583]: Created new backup: 2014-10-07-133459
10/7/14 1:35:02.966 PM com.apple.backupd[583]: Starting post-backup thinning
10/7/14 1:35:21.833 PM com.apple.backupd[583]: Deleted /Volumes/My Passport for Mac/Backups.backupdb/Alan’s iMac/2014-10-06-125056 (14.5 MB)
10/7/14 1:35:21.833 PM com.apple.backupd[583]: Post-backup thinning complete: 1 expired backups removed
10/7/14 1:35:21.870 PM com.apple.backupd[583]: Backup completed successfully.
10/7/14 1:37:47.508 PM apsd[61]: Unrecognized leaf certificate
10/7/14 1:42:13.237 PM xpcproxy[615]: assertion failed: 13F34: xpcproxy + 3438 [D559FC96-E6B1-363A-B850-C7AC9734F210]: 0x2
10/7/14 1:53:08.205 PM apsd[61]: Unrecognized leaf certificate
10/7/14 1:58:39.689 PM Console[636]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored.
10/7/14 1:58:41.770 PM WindowServer[92]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
10/7/14 1:58:42.523 PM WindowServer[92]: common_reenable_update: UI updates were finally reenabled by application "Console" after 1.75 seconds (server forcibly re-enabled them after 1.00 seconds)
10/7/14 2:08:28.567 PM apsd[61]: Unrecognized leaf certificate
10/7/14 2:09:59.519 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.CD6ADA0B-2717-4CE5-A7A8-24BAC0018D97[306]) Exited with code: 1
10/7/14 2:09:59.519 PM com.apple.launchd[1]: (com.apple.WebKit.WebContent.705EC731-1E84-4809-B639-AAB0195B51A5[305]) Exited with code: 1 -
After installing 10.9.4 computer freezes after sleep
After I installed 10.9.4, my Imac bean to freeze after being asleep. Sometimes I can move the mouse, but it has no effect on anything. Most of the time I move the mouse or keyboard and I get eh color wheel of death. Here is my info, can you help?
EtreCheck version: 1.9.12 (48)
Report generated August 6, 2014 at 7:06:43 PM MDT
Hardware Information:
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 2.93 GHz Intel Core i7 CPU: 4 cores
8 GB RAM
Video Information:
ATI Radeon HD 5750 - VRAM: 1024 MB
iMac 2560 x 1440
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 5:12:25
Disk Information:
WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 902.82 GB (631.84 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 84.56 GB (38.76 GB free)
PIONEER DVD-RW DVRTS09
USB Information:
Apple Inc. iPhone
Logitech USB Receiver
Apple Internal Memory Card Reader 31.91 GB
NIKON D7000 (disk1s1) /Volumes/NIKON D7000: 31.91 GB (28.3 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Fitbit Inc. Fitbit Base Station
Apple, Inc Apple Keyboard
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
G-TECH OEM ATA Device 00 800mbit - 800mbit max
EFI (disk2s1) <not mounted>: 209.7 MB
G-DRIVE (disk2s2) /Volumes/G-DRIVE: 999.86 GB (937.8 GB free)
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] arcana.PRAM (6.1) Support
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
[loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.52) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
Startup Items:
ArcanaStartupSound: Path: /Library/StartupItems/ArcanaStartupSound
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.avast.init.plist Support
[loaded] com.avast.uninstall.plist Support
[loaded] com.avast.update.plist Support
[running] com.crashplan.engine.plist Support
[running] com.fitbit.galileod.plist Support
[failed] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[running] com.rim.BBDaemon.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[failed] com.vmware.launchd.vmware.plist Support
[not loaded] com.vsearch.daemon.plist Support
[failed] com.vsearch.helper.plist Support
Launch Agents:
[loaded] com.avast.userinit.plist Support
[failed] com.google.keystone.agent.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[failed] com.vsearch.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.avast.home.userinit.plist Support
[running] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items:
SpeechSynthesisServer
Canon IJ Network Scanner Selector EX
Dropbox
CrashPlan menu bar
Fitbit Connect Menubar Helper
Internet Plug-ins:
Easy-WebPrint EX: Version: 1.1.0 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.10 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Silverlight: Version: 5.1.10516.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.10 Support
npDDRia: Version: 0.0.14.2 - SDK 10.9 Support
EPPEX Plugin: Version: 3.0.5.0 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
avast! Online Security: Version: 9.0.2022.120
1Password: Version: 4.2.3
Dragon Dictate: Version: 12.81.000.006
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Secrets Support
ArcanaStartupSound Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 840.81 GB Disk used: 252.37 GB
Destinations:
G-DRIVE [Local] (Last used)
Total size: 931.19 GB
Total number of backups: 33
Oldest backup: 2014-03-03 19:34:10 +0000
Last backup: 2014-03-13 00:00:27 +0000
Size of backup disk: Adequate
Backup size 931.19 GB > (Disk used 252.37 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
1% WindowServer
1% fontd
1% CrashPlan menu bar
0% Fitbit Connect Menubar Helper
0% Dropbox
Top Processes by Memory:
164 MB softwareupdated
131 MB mds_stores
131 MB com.avast.daemon
123 MB CrashPlanService
106 MB Finder
Virtual Memory Information:
4.89 GB Free RAM
1.83 GB Active RAM
525 MB Inactive RAM
781 MB Wired RAM
1.96 GB Page-ins
0 B Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\) \\(.+\\)/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
[SOLVED] Getting freezes after using dwm for some time and exiting it
Hello, I have an Asus Ux51, with a fresh (less than a month) arch installation. If I recall correctly I had a couple of freezes in other occasions but I don't remember much about those so I rather focus on the only freeze I can more or less reproduce and I've been having lately. After using dwm for some time with a couple of programs opened (rTorrent, browser, and some terminals for instance), if I close dwm or just press the power button to shut down, it starts closing everything and either stays with a black screen, or hangs while X prints the log information. It's not always though, for example, if I just boot it, open dwm and close it without giving it much use it usually closes fine.
Tried googling a bit to see the usual ways to troubleshoot this but didn't get really far.
This is my /var/log/Xorg.0.log
[ 7.573]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 7.573] X Protocol Version 11, Revision 0
[ 7.573] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 7.574] Current Operating System: Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 7.574] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=74e92d67-41b6-4911-8ceb-009ae8c9cdab ro quiet add_efi_memmap i915.i915_enable_rc6=1 pcie_aspm=force drm.vblankoffdelay=1 i915.semaphores=1 "acpi_osi=!Windows 2012"
[ 7.574] Build Date: 01 July 2013 10:48:42AM
[ 7.574]
[ 7.574] Current version of pixman: 0.30.0
[ 7.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.574] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 10 19:08:34 2013
[ 7.574] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 7.575] (==) No Layout section. Using the first Screen section.
[ 7.575] (==) No screen section available. Using defaults.
[ 7.575] (**) |-->Screen "Default Screen Section" (0)
[ 7.575] (**) | |-->Monitor "<default monitor>"
[ 7.575] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.575] (==) Automatically adding devices
[ 7.575] (==) Automatically enabling devices
[ 7.575] (==) Automatically adding GPU devices
[ 7.578] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 7.578] Entry deleted from font path.
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 7.578] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 7.578] Entry deleted from font path.
[ 7.578] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 7.578] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 7.578] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.578] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.578] (II) Loader magic: 0x7fdc20
[ 7.578] (II) Module ABI versions:
[ 7.578] X.Org ANSI C Emulation: 0.4
[ 7.578] X.Org Video Driver: 14.1
[ 7.578] X.Org XInput driver : 19.1
[ 7.578] X.Org Server Extension : 7.0
[ 7.578] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 7.580] (--) PCI:*(0:0:2:0) 8086:0166:1043:15a7 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 7.580] (--) PCI: (0:1:0:0) 10de:0fd1:1043:15a7 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 7.580] Initializing built-in extension Generic Event Extension
[ 7.580] Initializing built-in extension SHAPE
[ 7.580] Initializing built-in extension MIT-SHM
[ 7.580] Initializing built-in extension XInputExtension
[ 7.580] Initializing built-in extension XTEST
[ 7.580] Initializing built-in extension BIG-REQUESTS
[ 7.580] Initializing built-in extension SYNC
[ 7.580] Initializing built-in extension XKEYBOARD
[ 7.580] Initializing built-in extension XC-MISC
[ 7.580] Initializing built-in extension SECURITY
[ 7.580] Initializing built-in extension XINERAMA
[ 7.580] Initializing built-in extension XFIXES
[ 7.580] Initializing built-in extension RENDER
[ 7.581] Initializing built-in extension RANDR
[ 7.581] Initializing built-in extension COMPOSITE
[ 7.581] Initializing built-in extension DAMAGE
[ 7.581] Initializing built-in extension MIT-SCREEN-SAVER
[ 7.581] Initializing built-in extension DOUBLE-BUFFER
[ 7.581] Initializing built-in extension RECORD
[ 7.581] Initializing built-in extension DPMS
[ 7.581] Initializing built-in extension X-Resource
[ 7.581] Initializing built-in extension XVideo
[ 7.581] Initializing built-in extension XVideo-MotionCompensation
[ 7.582] Initializing built-in extension XFree86-VidModeExtension
[ 7.583] Initializing built-in extension XFree86-DGA
[ 7.583] Initializing built-in extension XFree86-DRI
[ 7.584] Initializing built-in extension DRI2
[ 7.584] (II) LoadModule: "glx"
[ 7.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.586] (II) Module glx: vendor="X.Org Foundation"
[ 7.586] compiled for 1.14.2, module version = 1.0.0
[ 7.586] ABI class: X.Org Server Extension, version 7.0
[ 7.586] (==) AIGLX enabled
[ 7.587] Loading extension GLX
[ 7.587] (==) Matched intel as autoconfigured driver 0
[ 7.587] (==) Matched nouveau as autoconfigured driver 1
[ 7.587] (==) Matched nvidia as autoconfigured driver 2
[ 7.587] (==) Matched nv as autoconfigured driver 3
[ 7.587] (==) Matched intel as autoconfigured driver 4
[ 7.587] (==) Matched vesa as autoconfigured driver 5
[ 7.587] (==) Matched modesetting as autoconfigured driver 6
[ 7.587] (==) Matched fbdev as autoconfigured driver 7
[ 7.587] (==) Assigned the driver to the xf86ConfigLayout
[ 7.587] (II) LoadModule: "intel"
[ 7.588] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 7.592] (II) Module intel: vendor="X.Org Foundation"
[ 7.592] compiled for 1.14.2, module version = 2.21.12
[ 7.592] Module class: X.Org Video Driver
[ 7.592] ABI class: X.Org Video Driver, version 14.1
[ 7.592] (II) LoadModule: "nouveau"
[ 7.592] (WW) Warning, couldn't open module nouveau
[ 7.592] (II) UnloadModule: "nouveau"
[ 7.592] (II) Unloading nouveau
[ 7.592] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nvidia"
[ 7.592] (WW) Warning, couldn't open module nvidia
[ 7.592] (II) UnloadModule: "nvidia"
[ 7.592] (II) Unloading nvidia
[ 7.592] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 7.592] (II) LoadModule: "nv"
[ 7.592] (WW) Warning, couldn't open module nv
[ 7.592] (II) UnloadModule: "nv"
[ 7.592] (II) Unloading nv
[ 7.592] (EE) Failed to load module "nv" (module does not exist, 0)
[ 7.592] (II) LoadModule: "vesa"
[ 7.593] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 7.593] (II) Module vesa: vendor="X.Org Foundation"
[ 7.593] compiled for 1.14.0, module version = 2.3.2
[ 7.593] Module class: X.Org Video Driver
[ 7.593] ABI class: X.Org Video Driver, version 14.1
[ 7.593] (II) LoadModule: "modesetting"
[ 7.593] (WW) Warning, couldn't open module modesetting
[ 7.593] (II) UnloadModule: "modesetting"
[ 7.593] (II) Unloading modesetting
[ 7.593] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 7.593] (II) LoadModule: "fbdev"
[ 7.593] (WW) Warning, couldn't open module fbdev
[ 7.593] (II) UnloadModule: "fbdev"
[ 7.593] (II) Unloading fbdev
[ 7.593] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.593] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 7.594] (II) VESA: driver for VESA chipsets: vesa
[ 7.594] (++) using VT number 1
[ 7.594] (WW) Falling back to old probe method for vesa
[ 7.594] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.594] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 7.594] (==) intel(0): RGB weight 888
[ 7.594] (==) intel(0): Default visual is TrueColor
[ 7.594] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 7.594] (**) intel(0): Relaxed fencing enabled
[ 7.594] (**) intel(0): Wait on SwapBuffers? enabled
[ 7.594] (**) intel(0): Triple buffering? enabled
[ 7.594] (**) intel(0): Framebuffer tiled
[ 7.594] (**) intel(0): Pixmaps tiled
[ 7.594] (**) intel(0): 3D buffers tiled
[ 7.594] (**) intel(0): SwapBuffers wait enabled
[ 7.594] (==) intel(0): video overlay key set to 0x101fe
[ 7.594] (II) intel(0): Output eDP1 has no monitor section
[ 7.595] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 7.596] (II) intel(0): Output VGA1 has no monitor section
[ 7.596] (II) intel(0): EDID for output eDP1
[ 7.596] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 7.596] (II) intel(0): Year: 2012 Week: 0
[ 7.596] (II) intel(0): EDID Version: 1.4
[ 7.596] (II) intel(0): Digital Display Input
[ 7.596] (II) intel(0): 6 bits per channel
[ 7.596] (II) intel(0): Digital interface is DisplayPort
[ 7.596] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 7.596] (II) intel(0): Gamma: 2.20
[ 7.596] (II) intel(0): No DPMS capabilities specified
[ 7.596] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 7.596] (II) intel(0): First detailed timing is preferred mode
[ 7.596] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 7.596] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 7.596] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 7.596] (II) intel(0): Manufacturer's mask: 0
[ 7.596] (II) intel(0): Supported detailed timing:
[ 7.596] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 7.596] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 7.596] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 7.596] (II) intel(0): LG Display
[ 7.596] (II) intel(0): LP156WF4-SPB1
[ 7.596] (II) intel(0): EDID (in hex):
[ 7.596] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 7.596] (II) intel(0): 00160104952313780a25b5a159599d27
[ 7.596] (II) intel(0): 1c505400000001010101010101010101
[ 7.596] (II) intel(0): 010101010101e83580a8703816402024
[ 7.596] (II) intel(0): 550059c2100000180000000000000000
[ 7.596] (II) intel(0): 00000000000000000000000000fe004c
[ 7.596] (II) intel(0): 4720446973706c61790a2020000000fe
[ 7.596] (II) intel(0): 004c503135365746342d535042310069
[ 7.596] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 7.597] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 7.597] (II) intel(0): Printing probed modes for output eDP1
[ 7.597] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 7.597] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 7.597] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 7.597] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 7.597] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 7.598] (II) intel(0): EDID for output VGA1
[ 7.598] (II) intel(0): Output eDP1 connected
[ 7.598] (II) intel(0): Output VGA1 disconnected
[ 7.598] (II) intel(0): Using exact sizes for initial modes
[ 7.598] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 7.598] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 7.598] (II) intel(0): Kernel page flipping support detected, enabling
[ 7.598] (==) intel(0): DPI set to (96, 96)
[ 7.598] (II) Loading sub module "fb"
[ 7.598] (II) LoadModule: "fb"
[ 7.598] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 7.599] (II) Module fb: vendor="X.Org Foundation"
[ 7.599] compiled for 1.14.2, module version = 1.0.0
[ 7.599] ABI class: X.Org ANSI C Emulation, version 0.4
[ 7.599] (II) Loading sub module "dri2"
[ 7.599] (II) LoadModule: "dri2"
[ 7.599] (II) Module "dri2" already built-in
[ 7.599] (II) UnloadModule: "vesa"
[ 7.599] (II) Unloading vesa
[ 7.599] (==) Depth 24 pixmap format is 32 bpp
[ 7.599] (II) intel(0): [DRI2] Setup complete
[ 7.599] (II) intel(0): [DRI2] DRI driver: i965
[ 7.599] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 7.599] (II) UXA(0): Driver registered support for the following operations:
[ 7.599] (II) solid
[ 7.599] (II) copy
[ 7.599] (II) composite (RENDER acceleration)
[ 7.599] (II) put_image
[ 7.599] (II) get_image
[ 7.599] (==) intel(0): Backing store disabled
[ 7.599] (==) intel(0): Silken mouse enabled
[ 7.600] (II) intel(0): Initializing HW Cursor
[ 7.600] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 7.600] (==) intel(0): DPMS enabled
[ 7.600] (==) intel(0): Intel XvMC decoder enabled
[ 7.600] (II) intel(0): Set up textured video
[ 7.600] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 7.600] (II) intel(0): direct rendering: DRI2 Enabled
[ 7.600] (==) intel(0): hotplug detection: "enabled"
[ 7.613] (--) RandR disabled
[ 7.634] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 7.634] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context
[ 7.634] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 7.634] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 7.634] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 7.634] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 7.634] (II) AIGLX: Loaded and initialized i965
[ 7.634] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 7.634] (II) intel(0): Setting screen physical size to 508 x 285
[ 7.669] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 7.669] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.669] (II) LoadModule: "evdev"
[ 7.669] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 7.670] (II) Module evdev: vendor="X.Org Foundation"
[ 7.670] compiled for 1.14.2, module version = 2.8.1
[ 7.670] Module class: X.Org XInput Driver
[ 7.670] ABI class: X.Org XInput driver, version 19.1
[ 7.670] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.670] (**) Video Bus: always reports core events
[ 7.670] (**) evdev: Video Bus: Device: "/dev/input/event9"
[ 7.670] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.670] (--) evdev: Video Bus: Found keys
[ 7.670] (II) evdev: Video Bus: Configuring as keyboard
[ 7.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 7.670] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 7.670] (**) Option "xkb_rules" "evdev"
[ 7.670] (**) Option "xkb_model" "pc104"
[ 7.670] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 7.684] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 7.684] (II) Using input driver 'evdev' for 'Video Bus'
[ 7.684] (**) Video Bus: always reports core events
[ 7.684] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 7.684] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 7.684] (--) evdev: Video Bus: Found keys
[ 7.684] (II) evdev: Video Bus: Configuring as keyboard
[ 7.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input9/event8"
[ 7.684] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 7.684] (**) Option "xkb_rules" "evdev"
[ 7.684] (**) Option "xkb_model" "pc104"
[ 7.684] (**) Option "xkb_layout" "us"
[ 7.684] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 7.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Power Button'
[ 7.685] (**) Power Button: always reports core events
[ 7.685] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 7.685] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 7.685] (--) evdev: Power Button: Found keys
[ 7.685] (II) evdev: Power Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 7.685] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 7.685] (II) No input driver specified, ignoring this device.
[ 7.685] (II) This device may have been added with another device file.
[ 7.685] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 7.685] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 7.685] (II) Using input driver 'evdev' for 'Sleep Button'
[ 7.685] (**) Sleep Button: always reports core events
[ 7.685] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 7.685] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 7.685] (--) evdev: Sleep Button: Found keys
[ 7.685] (II) evdev: Sleep Button: Configuring as keyboard
[ 7.685] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 7.685] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 7.685] (**) Option "xkb_rules" "evdev"
[ 7.685] (**) Option "xkb_model" "pc104"
[ 7.685] (**) Option "xkb_layout" "us"
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 7.685] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 7.686] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event6)
[ 7.686] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'USB2.0 HD UVC WebCam'
[ 7.686] (**) USB2.0 HD UVC WebCam: always reports core events
[ 7.686] (**) evdev: USB2.0 HD UVC WebCam: Device: "/dev/input/event6"
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Vendor 0x4f2 Product 0xb36e
[ 7.686] (--) evdev: USB2.0 HD UVC WebCam: Found keys
[ 7.686] (II) evdev: USB2.0 HD UVC WebCam: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input6/event6"
[ 7.686] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 10)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event5)
[ 7.686] (II) No input driver specified, ignoring this device.
[ 7.686] (II) This device may have been added with another device file.
[ 7.686] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 7.686] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 7.686] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 7.686] (**) AT Translated Set 2 keyboard: always reports core events
[ 7.686] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 7.686] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 7.686] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 7.686] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 7.686] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 7.686] (**) Option "xkb_rules" "evdev"
[ 7.686] (**) Option "xkb_model" "pc104"
[ 7.686] (**) Option "xkb_layout" "us"
[ 7.686] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 7.686] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 7.687] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 7.687] (II) LoadModule: "synaptics"
[ 7.687] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 7.687] (II) Module synaptics: vendor="X.Org Foundation"
[ 7.687] compiled for 1.14.1, module version = 1.7.1
[ 7.687] Module class: X.Org XInput Driver
[ 7.687] ABI class: X.Org XInput driver, version 19.1
[ 7.687] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 7.687] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.687] (**) Option "Device" "/dev/input/event7"
[ 7.810] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 7.810] (**) Option "TapButton1" "1"
[ 7.810] (**) Option "TapButton2" "2"
[ 7.810] (**) Option "TapButton3" "3"
[ 7.810] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 7.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.810] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 7.853] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event7"
[ 7.853] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 7.853] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 7.853] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 7.853] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 7.853] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 7.853] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 7.853] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 7.853] (II) No input driver specified, ignoring this device.
[ 7.853] (II) This device may have been added with another device file.
Found this recent thread in the forums, I'll give REISUB a try late, but the times it freezed I remember trying to blindly reboot it, or switching off virtual console and couldn't.
In case it's of any use, this is my # uname -a
Linux arch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
Could it have something to do with the nvidia optimus setup that this laptop has? When installing arch I found out that there was no support yet for it so I'm just using the intel drivers (following what the arch wiki said).
Any ideas or advice to point me in the right direction would be very much appreciated.
Thanks in advance.
Last edited by contiver (2013-08-16 20:25:34)I don't start st in my .xinitrc. I launch it from dmenu and usually everything is fine. If I launch it from dwm's internal command using Alt-Shf-Return, X freezes 100% of the time. A workaround was suggested by st's main developer to call st like this:
static const char *termcmd[] = { "/bin/sh", "-c", "st", NULL };
but it didn't work for me.
Very rarely X will freeze anyway. I haven't been able to pin it down. When X fails, my journal returns this:
BUG: unable to handle kernel paging request at ffffc90014ce8000
IP: [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
PGD 7c00b067 PUD 7c018067 PMD 7b3eb067 PTE 0
Oops: 0002 [#1] PREEMPT SMP
Modules linked in: nls_cp437 vfat fat snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq_device snd_pcm snd_page_alloc snd_timer
CPU: 1 PID: 7520 Comm: X Not tainted 3.10.5-1-ck #1
Hardware name: /D410PT, BIOS MOPNV10N.86A.0155.2009.1106.0430 11/06/2009
task: ffff88007aa786b0 ti: ffff8800797ee000 task.ti: ffff8800797ee000
RIP: 0010:[<ffffffff812bfe7f>] [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP: 0018:ffff8800797efaa8 EFLAGS: 00010212
RAX: 0000000003ffff5c RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000003ffff5c RSI: ffffc90014901520 RDI: ffffc90014ce7fe0
RBP: ffff8800797efab8 R08: 00000000ffffd700 R09: 0000000003f83204
R10: 0000000000000000 R11: ffffc90014ce7fd8 R12: ffffffffffffffff
R13: ffffc90014901520 R14: ffffffff812bfdf0 R15: 0000000000000320
FS: 00007fb350033880(0000) GS:ffff88007ea80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc90014ce8000 CR3: 000000007b104000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
0000000000000000 ffff88007a4d3000 ffff8800797efb28 ffffffff812bfbb9
ffffffff00000000 ffff88007c00c000 0000000000000000 ffffffff8186f240
0000000000000000 ffffffff00000006 ffffd700797efb58 ffff88007a4d3000
Call Trace:
[<ffffffff812bfbb9>] cfb_fillrect+0x1c9/0x400
[<ffffffff812ba2e5>] bit_clear_margins+0x165/0x190
[<ffffffff812b3633>] fbcon_clear_margins+0x63/0x90
[<ffffffff812b7a9f>] fbcon_switch+0x3df/0x570
[<ffffffff813200bd>] redraw_screen+0x17d/0x240
[<ffffffff812b6eeb>] fbcon_blank+0x20b/0x2d0
[<ffffffff81320767>] do_unblank_screen+0xa7/0x1b0
[<ffffffff813175d1>] vt_ioctl+0x10d1/0x1170
[<ffffffff8130b407>] tty_ioctl+0x277/0xb90
[<ffffffff8118fb21>] ? mntput_no_expire+0x41/0x150
[<ffffffff81183a3e>] do_vfs_ioctl+0x2de/0x4c0
[<ffffffff8117328e>] ? ____fput+0xe/0x10
[<ffffffff8107766c>] ? task_work_run+0x9c/0xe0
[<ffffffff81183ca3>] SyS_ioctl+0x83/0xa0
[<ffffffff814bab9d>] system_call_fastpath+0x1a/0x1f
Code: 08 45 01 d8 31 d2 44 89 c0 41 f7 f1 83 f8 07 89 c2 76 4f 44 8d 08 48 8d 3e 0f 1f 00 4c 89 17 4c 89 57 08 4c 89 57 10 4c 89 57 18 <4
RIP [<ffffffff812bfe7f>] bitfill_aligned+0x8f/0x140
RSP <ffff8800797efaa8>
CR2: ffffc90014ce8000
---[ end trace aff6cb5ad5097aef ]--- -
[SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal
Hello,
I am working on Archlinux. My computer freeze when I resize a terminal window.
To reproduce the problem, I follow the below steps :
1- launch openbox (with tint2, xcompmgr and nitrogen)
2- start the "terminal" console emulator (with true transparent background)
3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
5- the box freeze
I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
Only a hard reset of the box is working.
I have tried to disable the transparent background of the terminal window without success.
I have tried to not start xcompmgr without success.
The problem also occurs with rxvt-unicode instead of terminal.
It seems the problem happens more often when using console emulator based on vte.
vte itself has the same issue.
The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
Option "RenderAccel" "true"
The problem with this workaround are poor graphical performances.
Could you please let me know if you have any idea / clue to identify / fix this problem ?
Thanks and regards
uname -a
Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
versions
nvidia 270.41.06-1
nvidia-utils 270.41.06-1
kernel26 2.6.38.4-1
openbox 3.4.11.2-2
xcompmgr 1.1.5-1
.xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec ck-launch-session openbox-session
.config/openbox/autostart.sh
# This shell script is run before Openbox launches.
# Environment variables set here are passed to the Openbox session.
# Set a background color
BG=""
if which hsetroot >/dev/null 2>&1; then
BG=hsetroot
else
if which esetroot >/dev/null 2>&1; then
BG=esetroot
else
if which xsetroot >/dev/null 2>&1; then
BG=xsetroot
fi
fi
fi
test -z $BG || $BG -solid "#303030"
# D-bus
if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
eval `dbus-launch --sh-syntax --exit-with-session`
fi
# Make GTK apps look and behave how they were set up in the gnome config tools
if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
/usr/libexec/gnome-settings-daemon &
elif which gnome-settings-daemon >/dev/null 2>&1; then
gnome-settings-daemon &
# Make GTK apps look and behave how they were set up in the XFCE config tools
elif which xfce-mcs-manager >/dev/null 2>&1; then
xfce-mcs-manager n &
fi
# Preload stuff for KDE apps
if which start_kdeinit >/dev/null 2>&1; then
LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
fi
# Run XDG autostart things. By default don't run anything desktop-specific
# See xdg-autostart --help more info
DESKTOP_ENV="OPENBOX"
if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
/usr/lib/openbox/xdg-autostart $DESKTOP_ENV
fi
xcompmgr &
nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
tint2 &
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "record"
Load "dbe"
Load "dri2"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "RenderAccel" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Xorg.0.log
[ 485.566]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 485.566] X Protocol Version 11, Revision 0
[ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
[ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
[ 485.566] Kernel command line: root=/dev/sda3 ro
[ 485.566] Build Date: 16 April 2011 12:05:35PM
[ 485.566]
[ 485.566] Current version of pixman: 0.20.2
[ 485.567] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
[ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
[ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 485.568] (==) ServerLayout "X.org Configured"
[ 485.568] (**) |-->Screen "Screen0" (0)
[ 485.568] (**) | |-->Monitor "Monitor0"
[ 485.568] (**) | |-->Device "Card0"
[ 485.568] (**) |-->Input Device "Mouse0"
[ 485.568] (**) |-->Input Device "Keyboard0"
[ 485.568] (==) Automatically adding devices
[ 485.568] (==) Automatically enabling devices
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 485.568] (**) Extension "Composite" is enabled
[ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 485.568] (WW) Disabling Mouse0
[ 485.568] (WW) Disabling Keyboard0
[ 485.568] (II) Loader magic: 0x81f4ee0
[ 485.568] (II) Module ABI versions:
[ 485.568] X.Org ANSI C Emulation: 0.4
[ 485.568] X.Org Video Driver: 10.0
[ 485.568] X.Org XInput driver : 12.2
[ 485.568] X.Org Server Extension : 5.0
[ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dri" will be loaded by default.
[ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) LoadModule: "extmod"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 485.569] (II) Module extmod: vendor="X.Org Foundation"
[ 485.569] compiled for 1.10.1, module version = 1.0.0
[ 485.569] Module class: X.Org Server Extension
[ 485.569] ABI class: X.Org Server Extension, version 5.0
[ 485.569] (II) Loading extension MIT-SCREEN-SAVER
[ 485.569] (II) Loading extension XFree86-VidModeExtension
[ 485.569] (II) Loading extension XFree86-DGA
[ 485.569] (II) Loading extension DPMS
[ 485.569] (II) Loading extension XVideo
[ 485.569] (II) Loading extension XVideo-MotionCompensation
[ 485.569] (II) Loading extension X-Resource
[ 485.569] (II) LoadModule: "glx"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
[ 485.588] compiled for 4.0.2, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
[ 485.589] (II) Loading extension GLX
[ 485.589] (II) LoadModule: "record"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 485.589] (II) Module record: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.13.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension RECORD
[ 485.589] (II) LoadModule: "dbe"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 485.589] (II) Module dbe: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DOUBLE-BUFFER
[ 485.589] (II) LoadModule: "dri2"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 485.589] (II) Module dri2: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.2.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DRI2
[ 485.589] (II) LoadModule: "dri"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 485.589] (II) Module dri: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension XFree86-DRI
[ 485.589] (II) LoadModule: "nvidia"
[ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 485.590] compiled for 4.0.2, module version = 1.0.0
[ 485.590] Module class: X.Org Video Driver
[ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
[ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 485.590] (--) using VT number 7
[ 485.593] (II) Loading sub module "fb"
[ 485.593] (II) LoadModule: "fb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (II) Module fb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "wfb"
[ 485.593] (II) LoadModule: "wfb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Module wfb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "ramdac"
[ 485.593] (II) LoadModule: "ramdac"
[ 485.593] (II) Module "ramdac" already built-in
[ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 485.593] (==) NVIDIA(0): RGB weight 888
[ 485.593] (==) NVIDIA(0): Default visual is TrueColor
[ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
[ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
[ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
[ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
[ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
[ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
[ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 486.026] (==) NVIDIA(0):
[ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 486.026] (==) NVIDIA(0): will be used as the requested mode.
[ 486.026] (==) NVIDIA(0):
[ 486.026] (II) NVIDIA(0): Validated modes:
[ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
[ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 486.054] (--) NVIDIA(0): option
[ 486.054] (--) Depth 24 pixmap format is 32 bpp
[ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 486.056] (II) NVIDIA(0): Config Options in the README.
[ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 486.286] (II) Loading extension NV-GLX
[ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 486.314] (==) NVIDIA(0): Backing store disabled
[ 486.314] (==) NVIDIA(0): Silken mouse enabled
[ 486.314] (==) NVIDIA(0): DPMS enabled
[ 486.314] (II) Loading extension NV-CONTROL
[ 486.315] (II) Loading extension XINERAMA
[ 486.315] (II) Loading sub module "dri2"
[ 486.315] (II) LoadModule: "dri2"
[ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 486.315] (II) Module dri2: vendor="X.Org Foundation"
[ 486.315] compiled for 1.10.1, module version = 1.2.0
[ 486.315] ABI class: X.Org Server Extension, version 5.0
[ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
[ 486.315] (==) RandR enabled
[ 486.315] (II) Initializing built-in extension Generic Event Extension
[ 486.315] (II) Initializing built-in extension SHAPE
[ 486.315] (II) Initializing built-in extension MIT-SHM
[ 486.315] (II) Initializing built-in extension XInputExtension
[ 486.315] (II) Initializing built-in extension XTEST
[ 486.315] (II) Initializing built-in extension BIG-REQUESTS
[ 486.315] (II) Initializing built-in extension SYNC
[ 486.315] (II) Initializing built-in extension XKEYBOARD
[ 486.315] (II) Initializing built-in extension XC-MISC
[ 486.315] (II) Initializing built-in extension SECURITY
[ 486.315] (II) Initializing built-in extension XINERAMA
[ 486.315] (II) Initializing built-in extension XFIXES
[ 486.315] (II) Initializing built-in extension RENDER
[ 486.315] (II) Initializing built-in extension RANDR
[ 486.315] (II) Initializing built-in extension COMPOSITE
[ 486.315] (II) Initializing built-in extension DAMAGE
[ 486.317] (II) Initializing extension GLX
[ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.364] (II) LoadModule: "evdev"
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (II) Module evdev: vendor="X.Org Foundation"
[ 486.365] compiled for 1.10.0, module version = 2.6.0
[ 486.365] Module class: X.Org XInput Driver
[ 486.365] ABI class: X.Org XInput driver, version 12.2
[ 486.365] (II) Using input driver 'evdev' for 'Power Button'
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (**) Power Button: always reports core events
[ 486.365] (**) Power Button: Device: "/dev/input/event1"
[ 486.376] (--) Power Button: Found keys
[ 486.376] (II) Power Button: Configuring as keyboard
[ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.376] (**) Option "xkb_rules" "evdev"
[ 486.376] (**) Option "xkb_model" "evdev"
[ 486.376] (**) Option "xkb_layout" "fr"
[ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.397] (II) Using input driver 'evdev' for 'Power Button'
[ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.397] (**) Power Button: always reports core events
[ 486.397] (**) Power Button: Device: "/dev/input/event0"
[ 486.413] (--) Power Button: Found keys
[ 486.413] (II) Power Button: Configuring as keyboard
[ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.413] (**) Option "xkb_rules" "evdev"
[ 486.413] (**) Option "xkb_model" "evdev"
[ 486.413] (**) Option "xkb_layout" "fr"
[ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
[ 486.415] (II) No input driver/identifier specified (ignoring)
[ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
[ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.430] (**) Option "xkb_rules" "evdev"
[ 486.430] (**) Option "xkb_model" "evdev"
[ 486.430] (**) Option "xkb_layout" "fr"
[ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
[ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.446] (**) Option "xkb_rules" "evdev"
[ 486.446] (**) Option "xkb_model" "evdev"
[ 486.446] (**) Option "xkb_layout" "fr"
[ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.447] (II) No input driver/identifier specified (ignoring)
[ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.447] (**) Logitech USB Optical Mouse: always reports core events
[ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
[ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
[ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 486.473] (II) No input driver/identifier specified (ignoring)
[ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
[ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
[ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
[ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524062
[ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
[ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10483200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
[ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
[ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
[ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3066.221 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
[ 0.003418] pid_max: default: 32768 minimum: 301
[ 0.003486] Security Framework initialized
[ 0.003528] AppArmor: AppArmor disabled by boot time parameter
[ 0.006682] Mount-cache hash table entries: 512
[ 0.006865] Initializing cgroup subsys ns
[ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.006960] Initializing cgroup subsys cpuacct
[ 0.007007] Initializing cgroup subsys memory
[ 0.007052] Initializing cgroup subsys devices
[ 0.007092] Initializing cgroup subsys freezer
[ 0.007133] Initializing cgroup subsys net_cls
[ 0.007172] Initializing cgroup subsys blkio
[ 0.007238] CPU: Physical Processor ID: 0
[ 0.007277] CPU: Processor Core ID: 0
[ 0.007317] mce: CPU supports 6 MCE banks
[ 0.007361] CPU0: Thermal monitoring enabled (TM2)
[ 0.007402] using mwait in idle threads.
[ 0.008216] ACPI: Core revision 20110112
[ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
[ 0.070017] Booting Node 0, Processors #1
[ 0.006666] Initializing CPU#1
[ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.169997] Brought up 2 CPUs
[ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
[ 0.171248] devtmpfs: initialized
[ 0.171248] NET: Registered protocol family 16
[ 0.171248] ACPI: bus type pci registered
[ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.171248] PCI: not using MMCONFIG
[ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.171248] PCI: Using configuration type 1 for base access
[ 0.171248] bio: create slab <bio-0> at 0
[ 0.173388] ACPI: EC: Look up EC in DSDT
[ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179316] ACPI: Dynamic OEM Table Load:
[ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.179932] ACPI: Dynamic OEM Table Load:
[ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.180248] ACPI: Interpreter enabled
[ 0.180292] ACPI: (supports S0 S3 S4 S5)
[ 0.180445] ACPI: Using IOAPIC for interrupt routing
[ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.180958] PCI: Using MMCONFIG for extended config space
[ 0.185933] ACPI: No dock devices found.
[ 0.185973] HEST: Table not found.
[ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.186564] pci 0000:00:01.0: PME# disabled
[ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
[ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
[ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.186801] pci 0000:00:1a.7: PME# disabled
[ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.186876] pci 0000:00:1b.0: PME# disabled
[ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186938] pci 0000:00:1c.0: PME# disabled
[ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.187003] pci 0000:00:1c.4: PME# disabled
[ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.187066] pci 0000:00:1c.5: PME# disabled
[ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
[ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
[ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
[ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.187333] pci 0000:00:1d.7: PME# disabled
[ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
[ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
[ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
[ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
[ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
[ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
[ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
[ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.188736] pci 0000:00:1f.2: PME# disabled
[ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
[ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
[ 0.189268] pci 0000:03:00.0: PME# disabled
[ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
[ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.189693] pci 0000:02:00.0: supports D1 D2
[ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189698] pci 0000:02:00.0: PME# disabled
[ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
[ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
[ 0.193514] pci 0000:05:02.0: supports D1 D2
[ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.193519] pci 0000:05:02.0: PME# disabled
[ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
[ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
[ 0.193601] pci 0000:05:02.1: supports D1 D2
[ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.193605] pci 0000:05:02.1: PME# disabled
[ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
[ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
[ 0.193687] pci 0000:05:02.2: supports D1 D2
[ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.193692] pci 0000:05:02.2: PME# disabled
[ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
[ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
[ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
[ 0.193786] pci 0000:05:03.0: supports D1 D2
[ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.193791] pci 0000:05:03.0: PME# disabled
[ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
[ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
[ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
[ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.193886] pci 0000:05:04.0: supports D1 D2
[ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193891] pci 0000:05:04.0: PME# disabled
[ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.194003] pci_bus 0000:00: on NUMA node 0
[ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203107] vgaarb: loaded
[ 0.203206] PCI: Using ACPI for IRQ routing
[ 0.203247] PCI: pci_cache_line_size set to 64 bytes
[ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
[ 0.203439] NetLabel: Initializing
[ 0.203478] NetLabel: domain hash size = 128
[ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203565] NetLabel: unlabeled traffic allowed by default
[ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210012] Switching to clocksource hpet
[ 0.211034] pnp: PnP ACPI init
[ 0.211084] ACPI: bus type pnp registered
[ 0.211173] pnp 00:00: [bus 00-ff]
[ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.211335] pnp 00:02: [dma 4]
[ 0.211337] pnp 00:02: [io 0x0000-0x000f]
[ 0.211338] pnp 00:02: [io 0x0081-0x0083]
[ 0.211339] pnp 00:02: [io 0x0087]
[ 0.211341] pnp 00:02: [io 0x0089-0x008b]
[ 0.211342] pnp 00:02: [io 0x008f]
[ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
[ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.211374] pnp 00:03: [io 0x0070-0x0071]
[ 0.211380] pnp 00:03: [irq 8]
[ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.211412] pnp 00:04: [io 0x0061]
[ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.211444] pnp 00:05: [irq 13]
[ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.211669] pnp 00:06: [irq 4]
[ 0.211671] pnp 00:06: [dma 0 disabled]
[ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211838] pnp 00:07: [io 0x0290-0x0297]
[ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211997] pnp 00:08: [io 0x0010-0x001f]
[ 0.211999] pnp 00:08: [io 0x0022-0x003f]
[ 0.212000] pnp 00:08: [io 0x0044-0x005f]
[ 0.212002] pnp 00:08: [io 0x0062-0x0063]
[ 0.212003] pnp 00:08: [io 0x0065-0x006f]
[ 0.212004] pnp 00:08: [io 0x0072-0x007f]
[ 0.212006] pnp 00:08: [io 0x0080]
[ 0.212007] pnp 00:08: [io 0x0084-0x0086]
[ 0.212008] pnp 00:08: [io 0x0088]
[ 0.212010] pnp 00:08: [io 0x008c-0x008e]
[ 0.212011] pnp 00:08: [io 0x0090-0x009f]
[ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.212016] pnp 00:08: [io 0x0800-0x087f]
[ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
[ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
[ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
[ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
[ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
[ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.213198] Switched to NOHz mode on CPU #0
[ 0.213237] Switched to NOHz mode on CPU #1
[ 0.213286] pnp: PnP ACPI: found 13 devices
[ 0.213326] ACPI: ACPI bus type pnp unregistered
[ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
[ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
[ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250746] pci 0000:00:01.0: setting latency timer to 64
[ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
[ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
[ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
[ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
[ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[ 0.251002] NET: Registered protocol family 2
[ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.251822] TCP reno registered
[ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.252025] NET: Registered protocol family 1
[ 0.295104] pci 0000:01:00.0: Boot video device
[ 0.295141] PCI: CLS 32 bytes, default 64
[ 0.295174] Unpacking initramfs...
[ 0.317387] Freeing initrd memory: 1728k freed
[ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 0.318046] apm: disabled - APM is not SMP safe.
[ 0.318193] audit: initializing netlink socket (disabled)
[ 0.318243] type=2000 audit(1303935493.316:1): initialized
[ 0.318520] highmem bounce pool size: 64 pages
[ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.320047] VFS: Disk quotas dquot_6.5.2
[ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.320261] msgmni has been set to 1709
[ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.320488] io scheduler noop registered
[ 0.320527] io scheduler deadline registered
[ 0.320574] io scheduler cfq registered (default)
[ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.321092] intel_idle: MWAIT substates: 0x22220
[ 0.321094] intel_idle: does not run on family 6 model 23
[ 0.321105] ERST: Table is not found!
[ 0.321155] isapnp: Scanning for PnP cards...
[ 0.676796] isapnp: No Plug & Play device found
[ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.976752] mousedev: PS/2 mouse device common for all mice
[ 0.976847] rtc_cmos 00:03: RTC can wake from S4
[ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.000200] cpuidle: using governor ladder
[ 1.000240] cpuidle: using governor menu
[ 1.000436] TCP cubic registered
[ 1.000476] NET: Registered protocol family 17
[ 1.000521] Registering the dns_resolver key type
[ 1.000569] Using IPI No-Shortcut mode
[ 1.000679] PM: Hibernation image not present or could not be loaded.
[ 1.000682] registered taskstats version 1
[ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
[ 1.001128] Initalizing network drop monitor service
[ 1.001211] Freeing unused kernel memory: 424k freed
[ 1.005982] <30>udev[38]: starting version 167
[ 1.107427] SCSI subsystem initialized
[ 1.127245] libata version 3.00 loaded.
[ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.131436] scsi0 : pata_jmicron
[ 1.131554] scsi1 : pata_jmicron
[ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.142526] ahci 0000:00:1f.2: version 3.0
[ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.142644] ahci: SSS flag set, parallel bus scan disabled
[ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.174032] scsi2 : ahci
[ 1.174136] scsi3 : ahci
[ 1.174235] scsi4 : ahci
[ 1.174335] scsi5 : ahci
[ 1.174434] scsi6 : ahci
[ 1.174532] scsi7 : ahci
[ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
[ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
[ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
[ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
[ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
[ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
[ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,Hi jasonwryan,
Your thread helps a lot. I saw a lot of posts but not this one.
This workaround is fine for me to wait the fix.
Thanks a lot
Workaround :
It seems the problem might be linked to transparent items like background.
As explained in the above thread :
According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow. It works OK with the older Xorg, though.
So the temporary solution is to downgrade 3 packages.
Install the tool to downgrade
> yaourt -Sy downgrade
Downgrade
Note the item number can change
> downgrade xf86-input-evdev
Hit "s" key
Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
> downgrade xorg-server
Hit "s" key
Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
> downgrade xorg-server-common
Hit "s" key
Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
Last edited by shefla (2011-04-27 22:36:37)
Maybe you are looking for
-
Error while running / creating webcenter portal app
Hi, I had a fresh installation of Oracle JDeveloper Studio Edition Version 11.1.1.6.0. I installed the oracle.webcenter.customization_bundle and oracle.webcenter.framework_bundle as well. Now whenever I want to create a new Webcentre Portal App it's
-
Where can i buy an airport extreme card for my powerbook
Where can I buy an airPort extreme caed for my powerbook? are they even available, if not how can I go wireless ?
-
Cannot save the file may be read only
Does anyone know how to save a current PDF in Adobe Acrobat X pro if getting "the file may be read only, or another user may have it opened. Please save document with a different name or in a different folder" windows 7. The file has not been opene
-
Mobile Me Gallery - My Gallery
I have several galleries in Mobile Me. When I post one, I do not want the person to be able to go to My Gallery which has ALL my Mobile Me galleries. I want to send a portfolio and do not want the receiver to be able to see all my personal galleries.
-
Changing the cmc session time out
Post Author: Sujitha CA Forum: Administration HI whenver i log into cmc my session times out pretty soon..is der any way i can increse this time out?? i read that the wca maintains a session variable based on which d tmie out occurs?is it so? can any