SPA 941 VoiceMail message waiting question (Linksys)

Hi Guys/Girls/Everyone
I was wondering if anyone can help me, I have a Linksys SPA 941, and am tying to get sipgate.co.uk to provide me voicemail message waiting indication but they have asked me the below:
If the device sends a SUBSCRIBE or if it waits for a NOTIFY for message waiting.
I was wondering if anyone can help answer this for me.
Thanks

According to the data sheet, it supports notify/subscribe for mwi.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10033/ps10038/data_sheet_c78-533409.html
• Voicemail waiting indicator (VMWI) via NOTIFY, SUBSCRIBE
This means that the spa will subscribe to the service and be notified when a message is left versus the unsolicited notify method where no subscription takes place.

Similar Messages

Lost admin password for SPA-941

Hi all,
I asked this question on community/netpro/collaboration-voice-video/ip-telephony, but was told that it was the wrong place to do it. I don't know how to move a post, so I'm asking again here (I hope I got it right this time).
The short version: how to reset/disable admin password in SPA-941 phone?
The long version:
I have an IP Phone SPA-941 --- bought it on eBay with 'lost admin password'. I've found somewhere on the Internet that it's possible to reset the phone to 'factory defaults', which is supposed to reset the admin password as well (which is why I bought the phone with this 'warning'). However, the 'information', failed to mention, that the factory reset is protected by the said administrator password.
Now, I have a bit of a problem since without this password, the phone is useless --- I cannot configure my SIP account there.
I cannot believe that loosing the admin password could yield a device unusable, so I presume that there must be a way to reset/recover password.
I have found somewhere a tool to upgrade firmware. I tried it.... Not surprisingly, it requires the admin password. However, it also prints a very promising message: "If you are the administrator and forgot the password, you may perform a factory reset by entering ****, option 73738#, and value 1 from a telephone connected to the unit to be upgraded.". I have no idea what the 'option' might be and the 'value 1'... I also do not know what they mean by 'telephone connected to the unit to be upgraded' --- this seems to indicate that the upgrade tool (or message) isn't meant for a phone, but for some other device to which a phone is to be connected.
I also found some discussions about the jumpers (JP1 and JP4) in the printed board of the phone. I tried all of possible combinations and none of them caused the phone to be any less demanding in terms of admin password (if it booted at all).
I also found some kind of 'recovery software'. It is supposed to 'recover' firmware to a version 4.1.x (I have 5.1.8 now but I assume that I'd be able to upgrade it back again when the 'downgrading' removes password). There are two options --- one is for 'normal' upgrade (well.. downgrade in this case), which requires admin password.
The second option is the 'recovery' --- it requires serial number. When I choose this one, the program warns me that it's only meant for phones displaying SOS message... I tried it regardless (what do I have to loose?), but the 'device couldn't be found'. Perhaps there is a way of corrupting the phone and entering this SOS-state?
This, for the moment used up my ideas as how to use my phone. In desperation I'm trying the brute-force 'attack' --- I'm able to check about 1k passwords in 60s... I've found in some docs, that passwords can be 63 character long alphanumeric strings, which means that I should be able to check all of the combinations in something about 264646141002173127075674008932259139731080369373079015446569116064180887885670843 years, so I'll not hold my breath. In the meanwhile... Please help. Is there a way to 'crack' the phone and reset the admin password?

Hi Michal,
From what you describe, it appears that the original service provider properly locked down the phone. If they really did, then brute force is the only way ahead.
There are no backdoors in the SPA phones or ATAs. The idea being that a service provider can easily recover from a lost password by simply reprovisioning a device with a new or blank password. Many service providers give the SPA devices away and then sell a service, this is why they allow the customer to keep the device when the service is terminated.
I read articles where if so inclined, as you appear to be, you can set up a private network to replicate the original service provider's network, including DNS. Then, using a protocol analyzer, you watch to see how the SPA device behaves and what it looks for. I've read that if you devote enough time to this exercise, you could build the files that make the phone believe it is on its home network and then provision it with a blank password.
Or, you could buy a shiny new SPA5xx or SPA3xx phone with many more features, current firmware, and get to spend the time doing something else.
Best of luck, either way.
Regards,
Patrick

SPA303 Message Waiting Indicator for specific line only

I have an SPA303 configured with 2 lines (extensions).
I want the message waiting indicator to only show for line 2, not line 1.
I've tried going to Advanced, Voice, Ext1 and setting "Message Waiting" to No
and for Ext2 setting it to Yes.
Hit "Submit All Changes"
After phone reboots, Ext1 still says Yes, and Ext2 still says No. I cant seem to change these.
Is this the correct way to accomplish my request?

I have no SPA303 here, but it is almost identical hardware and exactly the same firmware (I assume you have the latest) as other SPA[35]0x models. I have no problem to set Message Waiting independently. I can't repeat the behavior you described.
So either your setting is overwritten by remote provisioning, or it's a complex issue related to overall configuration of phone.
Can you change setting for one extension only ? Have you provisioning configured ? Can you turn on syslog&debug and capture output ?
It may or may not help to analyze the issue.
By the way, wrong forum. Your question have nothing to do with XML application. (Updated: has been moved to the correct one)

VM message waiting counter doesn't work on Palm Pre Plus

My voice mail message waiting counter isn't working on my Palm Pre Plus. At first, it showed messages waiting when there weren't any. I Reset Voicemail Count, and ever since then, it doesn't show any messages waiting when there are messages. i have also tried a hard reset, to no avail.
Any help is much appreciated.
Thanks.

Try to reset the voicemail count by going to:
1.Phone App
2.Menu
3.Preferences
4.Scroll to bottom of page and tap 'Reset Voicemail Count'.

Message waiting light

I would give my right arm to be able to look at my iPhone while it's asleep and see some indication that I have a message waiting - text, email or voice. Maybe a few flashing pixels with different colors for different types of message. Most other phones have this, WHY NOT MINE? I don't think there's an app for that due to being asleep...

Do you have some sort of question that fellow iphone users can help with?
If not, you can leave feedback for Apple at:
http://www.apple.com/feedback/iphone.html

Cannot connect in Game Center to play a game using IPhone 5 and iPhone 4 (both running ios 7) when we try, we just get the message "waiting"

My wife and I cannot connect in Game Center to play a game using IPhone 5 and iPhone 4 (both running ios 7) when we try, we just get the message "waiting"

Hello, TheHelper1964.
Thank you for the question. There could be multiple causes to the errors that you are receiving. I have included a couple articles that will help you troubleshoot this issue.
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/TS2690
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/TS2529
If you are uncomfortable processing some of these steps, you can also reach out to us at http://expresslane.apple.com.
Hope this helps,
Jason H.

I am trying to use firefox as the web lauch for citrix ica but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?

I am trying to use firefox as the web lauch for citrix ica client but when I go to login into remote site - I get the message waiting to find website but it nver finds the website. Has anyone else had this problem?
When I installed firefox, it asked if I wanted to use safari settings and I said yes but I think this might be causing the problem. Safari is no longer compatible with citrix ica client. When I reinstalled firefox it automatically installs the safari info. Does anyone know how to re-install firfox without installing safari info?

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

How do I transfer voicemail messages from my iPhone 4 to my Mac?

Hi
I'm trying to transfer a selected group of voicemail messages from my iPhone 4 onto my mac - would someone please advise me if there's a simple method to do this?
Cheers
Stephen.

Get this, does that & a whole lot more:
http://www.ecamm.com/mac/phoneview/

How do you delete voicemail messages from iphone 5s

I'm trying to delete voicemail messages from iphone 5s. Based on visiting previous discussions on this subject, I've tried "resetting network settings" and "turning airport mode ON, deleting messages, then turning airport mode OFF" -- to no avail. I'm receiving an alert that I've reached capacity...please assist. I run my business on my iPhone and right now I'm missing opportunities.
Thanks in advance for your expediency.

From the iPhone User Manual:

HT1687 why is my voicemail messages not displaying ?

why is my voicemail messages not displaying ?

Voice mail, including visual voice mail, is a carrier feature. Contact your carrier and ask them.

I have a Laserjet 2550L. When I try to print 2nd time get message "Waiting for printer to become ava

Laserjet 2550L being used with Mac OSX Lion 10.7.3. After turning on, it will print once. When trying to print a second time I get a message "waiting for printer to become available." I have to turn it off and then back on to get it to print again.

Hum. Let's uninstall with the 'scrubber option' like this:
1. Go to Applications/Hewlett Packard/ click on HP Uninstaller and click Continue
2. Highlight your device on the left pane
3. Hold the Ctrl, Opt and Cmd keys and click on Uninstall
4. There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
5. Click Continue and let it finish
Now, run a Software Update. This can be done by clicking the Apple in the top left of the screen then clicking Software Updates.
Next, let's reset the printing system:
Go to System Preferences > Print & Scan
- Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add a printer. Select the Default tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Let me know how this works for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

On my HP printer Officejet4620 I get an error message "waiting for printer to become available". Help please?

Restart the computer and restart the printer. If you continue to have the problem the follow the steps Apple outlines in Reset Printing System feature article.

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically I am trying to access messages that were in my deleted folder at the time I last saved, that have since been cleared.

Does iCloud save voicemail messages from my iphone 5 when I back up? More specifically, I am trying to access messages from my now deceased father that were in my deleted voicemail folder at the time I last saved, that have since been cleared.

The iCloud backup includes visual voicemail messages. I'm not sure if it includes the deleted ones or not, but I would assume it does.

Message: "Waiting for App Store to download Mac OS X Server Add on"

Trying to install 10.7 (from 10.6.8) on Mac Mini server 4,1. I don't use it as a server, and don't know anything about that.I get a message "Waiting for App Store to download Mac OS X Server Add on" check download at App store. There is none. Help?
Mac Mini Server 4.1/2.66 GHz/Intel Core 2 Duo/8 GB Memory

Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
What a pain.
If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

SPA 941 VoiceMail message waiting question (Linksys)

Similar Messages

Maybe you are looking for