SPA IP phones doesn't show calling number after the call was picked UP

Hello,
Our different CISCO SPA IP phones models (at this time we are using 7.4.8a version) are working with Broadsoft AS. And now we have a problem: when CISCO SPA IP PHONE pickups the call ( by pressing BLF lamp) and the call is connected, Cisco user doesn't see any information (calling name or calling number) with whom he is talking now. He on only sees on screen pickup extension *11 and info that the call is connected. From SIP traces I can see this information in PAI header in SIP 200 OK message (when pickup was initiated).
I also tried to change Caller ID Header - no luck. I've upgraded IP phone to latest version (7.5.1a) - didn't help.
I've experience with THOMSON and MGC. By pressing BLF , Thomson displays info who (calling number) is calling to your configured BLF line and gives you actions: retrieve this call or cancel - you can choose if you still want pickup this call.
So can you give me some hints how to fix this issue? Our at this time CISCO IP PHONE doesn't have such feature?
Thanks in advance,
Giedrius

Why not answer?
bug is available from firmware 7-4-7 and above and are still
on models SPA50x and SPA525

Similar Messages

HT4623 By accident i removed the charger while updating and now my iPhone shows me connect to iTunes and i am but my Phone doesn't show Help :(

By accident i removed the charger while updating and now my iPhone shows me connect to iTunes and i am but my Phone doesn't show Help

You need to restore the iPhone via recovery mode. To do this follow the link below to guide you:
http://support.apple.com/kb/HT1808
Because you need to restore to factory settings all data on the iPhone will be erased. Because the iPhone was never backed up most of the data you won't be able to get back.

HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

I have had this happen to me on 3GS, 4 and 4s. Usually the solution is one of the following:
1- If your volume indicator says headphones even though they are not plugged in, then:
Stick your headphones into the headphone jack and then remove quickly.
2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
Hope one of these works for you

Add prefix 9 for incoming calling number of missed call only.

Dear,
I am wondering how to add the prefix 9 to incoming calling number of missed calls only, not the calling alerting number on the phone screen. For example, the local user 472 2001 calls our DID 482 3001 along with the calling number 472 2001 on the dialed phone screen, if I missed this call, in the directory missed call I can see 94722001.
I know I can add the prefix in the field incoming called party subscriber prefix on the gateway page, but when I do this, all of the calling number information show 9.
Thanks,
Kirin

If I understand you correctly, you would like to only change the missed calls/placed calls on your phones without changing the digits?
If you have an PRI, you can use this translation rule to change calling ID only on inbound calls:
Translation pattern to modify Caller ID to add a 9
voice translation-rule 1
Rule # /match/ /set/
(^.= Match anything begining with any number)(*= one or more digits) tranlasate to (9& = Take whatever is in the match phase and plug it in here)
rule 1 /^.*/ /9&/ type subscriber subscriber (subscriber = ton(Ton=Type of number) value local area)
rule 2 /^.*/ /91&/ type national national (national = ton value long distance area)
rule 3 /^.*/ /9011&/ type international international (international = ton value international area)
Config t
voice translation-rule 1
rule 1 /^.*/ /9&/ type subscriber subscriber
rule 2 /^.*/ /91&/ type national national
rule 3 /^.*/ /9011&/ type international international
voice translation-profile INBOUND_PSTN
translate calling 1
voice-port X/X/X
translation-profile incoming INBOUND_PSTN
Let me know if this helps.
John

After updating to 6.0 iPhone doesn't show in iTunes for the wireless sync

I have the iPhone 4s, after updating to 6.0 it doesn't show in iTunes for the wireless sync. My iPad which is first gen. still shows up. If I plugin with usb it shows up but as soon as I unplug it disappears.
When I click on the sync wireless on the iPhone , it trys to sync but nothing.

it's okay, it is not silly. but yes it was on but i went ahead and turned it, (the phone) off rebooted and turned it back on and rebooted phone again to see if it helps it any.... but to no it did not change, it still doesn't show up. as well as when i look in on wifi and see choose network mine is not populated until after a couple seconds. so it has something to do with not being able to hold on to a wifi signal when going to sleep or putting phone to sleep via power button. i do not see the wifi signal meter until a couple seconds after i wake it up from sleep. and now neither my ipad or iphone show up in itunes. so there is issues i guess with something. i have tried everything an dam too frustrated to do anything more.

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

I just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

i just plugged my iphone in to download some pix to my computer and my phone is now showing a plug with the itunes icon and its telling me I have to restore my phone and will lose all my data. *** is going on and how can I go back?

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

Previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once before. Recently that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.

Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic

Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen?

Updated my iphone with iOS7.0.3, still dont have the option to reject the call or reject the call with a message when someone call and the phone is in the lock screen? I was of the impression that this issue will be fixed with updates. Please see the screenshot.

Hello Beardsell,
This is when the phone is unlocked mode. My snapshot is when the phone is locked.
Remember when you get a call when the phone is locked and you used to have slide to answer in iOS 6 and if you slide up you would have options to reject, reject with a message and reject with a reminder. We dont have that in iOS 7. iOS 7 *****, I cannot get back to iOS6, apple needs to be user friendly. Screen shot 1 when the phone is locked, screenshot 2 when the phone is unlocked.

I have Firefox 5 and Reminderfox. But Reminderfox doesn't show. What's the problem?

I have Firefox 5 and Reminderfox. But Reminderfox doesn't show. What's the problem?

Please click the '''Solved It''' button next to the answer that answered or solved your Firefox support issue, '''''it appears when you are logged in''''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

I have an iPhone 5 with LTE 4G but doesn't show this option in the settings.Can you help me please.

I have an iPhone 5 with LTE 4G but doesn't show this option in the settings.Can you help me please.

Ask your carrier. No one here works for Apple, represents Apple or Speaks for Apple, thus no one here can answer your question.

HT4623 I am in the process of updating my IOS and my phone screen is showing a picture of the itunes symbol with a USB cord. I can't get the phone to turn back on. What do I do?

I am in the process of updating my IOS and my phone screen is showing a picture of the itunes symbol with a USB cord. I can't get the phone to turn back on. What do I do? Help!!

Your device is in recovery mode. Connect the device to iTunes and the computer and follow the instructions in this support document. http://support.apple.com/kb/HT1808

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Call remains in "conferenced" state after the call is released

We have a scenario where a lengthy recorded message is set up through a ICM call routing script. If we call the number we assigned to the script using our hard phones the call is disconnected as soon as the recorded message is finished playing.
When we use Cisco Administrator Desktop and the conference feature, the call remains in the "conferenced" state after the call has been released.
My assumption was that our reports would be smarter than CAD and would get it right. However, reporting agrees with CAD, it thinks the call remained on a conference call for the whole time.
In the script we set some variables for the call, play the message through "RunExtScript" node, set a call type, than use the "ReleaseCall" node to disconnect the call. Any ideas how we can configure the script other than this?

Hi,
can you tell us more - do you have Translation Routing set up, perhaps?
Also, can you take a look at the Router Log (on the Distributor server).
And please swith the script to Monitoring mode to see where it fails.
G.

SPA IP phones doesn't show calling number after the call was picked UP

Similar Messages

Maybe you are looking for