SPA112 connect through internet to SPA9000

Hello, i have problem to connect SPA112 through internet to SPA9000.
The SPA9000 is on public fixed IP address. On PBX status it shows that SPA112 is connected(both ports) but i am not able to make or recive calls.
Any idea what to try ?
Settings on SPA112:
Proxy 10.0.21.70:6060
Outbound proxy: 46.167.237.151:6060
Settings on SPA9000:
PBX Parameters
Proxy Network Interface: WAN
Proxy Listen Port: 6060
For any help thank you Petr (+420774543567)

can you please tell me how can i do this ? https://forums.oracle.com/forums/search.jspa?threadID=&q=Change+AND+IP+AND+Address&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
is ther a touturial for Configure DMZ becouse i don have MOS id :)It is not an easy setup and you will need to have access to the doc.
Thanks,
Hussein

Similar Messages

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan

IPad 2 connection through internet sharing

This may be answered somewhere else on the discussions, but I would like some assistance in connecting an iPad 2 to the internet through an iMac that is connected through an Alltel wireless card. In the iMac, I've turned Internet Sharing on, and the airport is also on. What am I missing ? ? ? Or is it not possible ? ? ?

Jack:
I wrote this on an earlier thread and it seemed to help another user so give it a try. Bold type is specific to you. Ignore anything you already know. I'm not sure if you can share the connection from a wireless connection (you CAN share from ethernet) but these are the steps and it may work.
OK if you selected Internet Sharing on the Mac you must also select
Share your Connection from - Ethernet (select ethernet) I think you would choose the Airport option since your are using a wireless card
To Computers Using - Airport (your iPad is the computer using Airport in this case)
Then you may have to select the Internet Sharing option again - put a checkmark in the box
Then go to Security in your preferences and select Firewall - turn off the Firewall to allow incoming connections to your Mac
Make sure you have Airport enabled on your Mac and go up to the Airport icon at the top of the screen, click on it, and drop down to select - Create Network. A box will come up and it should offer your computer's name as the default network name. You can name the network whatever you like. Then create a password.
This should be what you need to do to get connected. Once you do all of the steps on the Mac, reboot your iPad, go to Settings>WiFi>Network and select your new network.
Message was edited by: Demo

Oracle Server Connectivity through Internet

Hi
I have installed Oracle Server in my Office. Office Server SID is "ORACLE". My office website is "xxxxx.NET". I want to access Office Server from my home (here too Oracle Server available) place through internet. Can anyone please help me how to connect to my Office Server from my home place through internet. What are changes required in TNSNAMES.ORA file, SQLNET.ORA.

Hi, Is it the database server available from outside office??, Does server has a public interface? Do you have access to server through simple TCP connection from your home??
Luck.
Have a good day.
Regards.

Airport connection through Internet Sharing

Hi
I was wondering if I have a Powerbook G4 with an airport Extreme card installed and I have a Desktop G5 without airport, can I do Internet Sharing through my cable modem, so I can get online with my laptop wirelessly and without a router or does my G5 have to have an airport card installed as well?
thanks for the help

I believe Duane was alluding to the fact that you have more options when using a router: configurations, security, expandability, etc. than you would if you limited yourself to just Internet Sharing.
With your current situation, instead of getting a wireless card for the G5, you can get (for example) a Linksys WRT54G wireless router. This router also has a built in network switch so you can still connect your G5 using Ethernet cable.
Your network configuration would then be:
Cable Modem > (Ethernet cable) > [WAN] Linksys Router [LAN] > (Ethernet cable) > [Ethernet port] G5, AND
Linksys Router > (wireless) > wireless clients.
Later, if you still wanted, you can get the wireless card for the G5, and all of your computer can access the Internet wirelessly.
As far as dial-up, this particular router won't support Internet connectivity. Instead, the only one that I'm aware of would be the AirPort Extreme Base Station (AEBS). No, in this case, you would just use the built-in dial-up moden in your computer.

Not able to connect SAP through internet with Windows 7 OS

Hi,
I am trying to use use latest version of SAP GUI 720 with Windows 7 Home Edition.
When I am connecting through Local Area Connection I am able to connet to the sap servers.
But when I am trying to connect through Internet with sap router string it displays error
"""""hostname 'mypublicip/s/3299/w/solman' unknown
Check your application server name
Do you want to see the detailed error desciption?
Yes/No """""
With same router string I am able to connect to SAP server through internet on Windows XP pro.
Does SAP router string needs some modification for Windows 7?
Kindly help.
With Best Regards,
Rajkumar

hi,
Can you try to input the private ip address of the SAP router server instead of the public. Client should be connected in your network.
Thanks.
newbie

I am able to connect to the internet using internet explorer, but when I try to connect through mozilla firefox it says 'it is unable to establish a connection to the server." why?

I can establish internet connection through internet explorer using a router at my house, but whenever I attempt to connect using firefox, it says it is unable to connect.

A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

I can't get online through firefox (this keeps coming up THE PROXY SERVER IS REFUSING CONNECTIONS) but can through internet explorer?

As I said in the question when I click on the firefox link on the desktop this is what comes up (THE PROXY SERVER IS REFUSING CONNECTIONS Firefox is configured to use a proxy server that is refusing connections) but I can get connected through Internet Explorer. I have uninstalled firefox and reinstalled firefox with no difference.

I tried all that stuff and none of it helped. I can't load any of the google applications in firefox now. They pop up with this screen.
This Connection is Untrusted
You have asked Firefox to connect securely to mail.google.com, but we can't confirm that your connection is secure.
Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.
mail.google.com uses an invalid security certificate. The certificate is not trusted because it was issued by an invalid CA certificate. (Error code: sec_error_inadequate_key_usage)
Now I tried a couple of other sites and they all seemed to work okay, and if necessary I could click understand the risks and still access the site, but no go with google. Considering I use my google account for my calendar and gmail a lot, I am highly disappointed with this new update. I hate using IE and really prefer to use Firefox.

How to Connect my N79 through Internet on Laptop?

Hi Friends ,
i am facing a problem while connecting my N79 through Internet on my laptop . i am using USB Modem for Internet Connectivity. And i want to share this Internet on my N79 through Wireless LAN . i am using Windows Vista . Please tell me how to Configure my WLAN on my laptop . so that i can use it to browse through my N79.
Please Help Me Guys .....................!!!!!!

Yes, it can be done.
1) Enable "Internet Connection Sharing" on the laptop and share the connection that refers to your USB modem.
2) Ask your ISP what the IP addresses of their nameservers are and make a note of them.
3) Configure the laptop's wireless adapter in ad-hoc mode and assign it a static address on the wireless network.
4) Configure the N79 in ad-hoc mode as well, and give it a static address on the wireless network. Enter manual settings telling it to use the IP address of the laptop as its default gateway and to use the IP addresses given to you by your ISP as its nameservers.
With this, you can use the laptop as your phone's portal to the Internet, but only with your phone. This will only work with one device at a time. If you want to use more than one device at the same time you're better off buying a real wireless router to which you will be able to connect your laptop, your phone and any other wifi-aware device you might have.
NB: I don't use Windows on my machines and therefore can't give any specific information about doing this. The advanced settings needed for the phone will be described in the manual.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Help I purchase an Ipad yesterday I amusing internet connection through a netgear wired to my home computor since yesterday I am unable to open my emails or access my bank account ps I am not technical I am with orange broad band and have followed their i

Help I purchased an ipad yesterday I am using internet connection through a wired up netgear router through my pc.Since then I cannot open my hotmail emails or access my online banking on wired pc and the navigator on ipad not working.
I would appreciate help I followed all directions that Orange provided with netgear router

Something here may help
http://www.apple.com/uk/support/ipad/contact/
pick a subject from left hand panel
and this
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

My IPOD and Macbook Pro both will not connect to the Itunes store through Itunes says no internet connection, but I can connect through safari and I have a internet connection

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

Only able to connect to internet through Broadband DSL one computer at a time.

Hi,
I am using Verizon Broadband DSL, and have used it for a few years.
Equipment:
Westell Versalink Model 327W
Linksys Wireless-G Broadband Router Model WRT54G
I have a desktop (running Windows XP), and 2 laptops (1 XP, 1 Vista) that are connected wirelessly. Until recently all 3 computers have been working fine, connecting to the internet on the wireless network.
The problem is this: When any one of the computers is connected to the internet through the DSL none of the others computers is able to connect – I see the message “Connecting through WAN miniport (PPOE)…”, i.e. I am only able to connect to the internet 1 computer at a time.
As soon as I disconnect from the ‘connected’ computer (desktop or laptop) I am immediately able to successfully connect to the internet on either of the other 2 computers.
I’ve tried resetting everything – no luck.
I don’t recall having changed any of the settings and am baffled.
Any thoughts as to the problem?
Thanks in advance for any help.
Charlie
PS. I haven't called the Verizon DSL Tech Support team yet...but I will soon. I figured on asking here first.
Solved!
Go to Solution.

CharlieJ wrote:
The problem is this: When any one of the computers is connected to the internet through the DSL none of the others computers is able to connect – I see the message “Connecting through WAN miniport (PPOE)…”, i.e. I am only able to connect to the internet 1 computer at a time.
As soon as I disconnect from the ‘connected’ computer (desktop or laptop) I am immediately able to successfully connect to the internet on either of the other 2 computers.
I’ve tried resetting everything – no luck.
I don’t recall having changed any of the settings and am baffled.
Any thoughts as to the problem?
Thanks in advance for any help.
Charlie
PS. I haven't called the Verizon DSL Tech Support team yet...but I will soon. I figured on asking here first.
Ok.
#1 You must get to the network control panel on your computer.
One of the ways, for Windows XP is:
a) Go to Start -> Control Panel -> Network Connections
b) The screen will look like steps 5 and 6, on http://portforward.com/networking/static-xp.htm
For Windows Vista:
a) Go to the globe icon (start button) -> Control Panel -> Network and Sharing Center -> Manage Network Connections.
b) The screen will look like steps 5, 6, and 7, on
http://portforward.com/networking/static-vista.htm
#2 Right click on the WAN miniport (PPPOE), and remove the check mark that says Set as Default Connection.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank you

Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Can't connect to internet through WRT54G

I can connect to the internet through DSL modem but cannot when going through the WRT54G. All lights on router lit correctly. Actually set up this router 6 months ago or so and worked both wired and wirelessly for awhile. Then could only access internet wirelessly with laptop. Started messing with the router to get it to work wired with desktop but now won't work. Can access the router set-up page but not sure what to change. Saw somewhere to change the routers IP address to 192.168.2.1 didn't solve the prblem. Have tried restoring factory defaults, recommended power on/off sequences (modem, router,pc) and holding reset button for 30 seconds. Also tried Easy connect tool on the Linksys site. Icon in lower right of pc screen indicates status as connected but still cannot connect to internet. Any help is very much appreciated.
Scott

I had the very same problem with the same model router. It turned out to be the Security setting in Internet Options. The security setting was on Medium. After changing it to Medium-Low, I could connect to the internet through the router.
If you are not familiar with changing the Security setting, let me know and I will reply with the steps to take.
Dale
Shelby, NC

Can't connect to internet through netgear95 router

Can't connect to the internet through a netgear95 router. my PC connects to internet ok, none of my apple stuff (iphone/ ipad) will connect though. Must be something in settings on router.
Scott

Hi Scott,
Do you have any Wireless devices that connect to the router? I'm assuming that your PC may connect via Ethernet cable?
Regards
Steve

SPA112 connect through internet to SPA9000

Similar Messages

Maybe you are looking for