SPA112 Crashes - No dialtone, restart needed - new firmware

Hi All,
I have a SPA112 brain new, with latest fw loaded as per Cisco site Version 1.2.1 (004)
Since the first installation has started to show the same problem as described also in " SPA112 Crashes - No dialtone, restart needed ".
The SPA seem to last almost 1 month, after will hang, the only way to get it back up is to power cycle.
Anybody knows if this problem has been solved or if there is some kind of work around ?
Thank you for helping
TrioTech

This appears to be related to https://supportforums.cisco.com/message/3779434#3779434
Regards,
Patrick

Similar Messages

SPA112 Crashes - No dialtone, restart needed

Yesterday morning, we picked up the phone to make a call via the SPA112 and there was no dialtone. I disconnected/reconnected the power and then we were able to get a dialtone and make a call. Unfortunately I didn't have the opportunity to see if the web-interface was up. Am running the latest GA firmware, 1.1.0 (011) Feb 10 2012. It had probably been running for only about 4 days or so since the last reboot. Anyone else seeing stability issues? (I thought I'd seen another older posting about someone having had to reboot their device regularly. In addition, I saw the report about caller id's longer than 26 chars causing issues, but I haven't publicized my new number yet so it is unlikely that was the cause.)
Cisco, any suggestions on a way to capture additional debug info, other than keeping a logging server running? Didn't see any unusual activity in the device logs.
Dan

Hello,
One thing I know crashes the SPA 122 on FW 1.1.0(011) is a "484 Address Incomplete". If the box is running 1.0.1(022), it responds appropriately, and just sends reorder to the phone. Of course, that brings back all the issues that were fixed in 1.1.0.
I opened a case asking about trying the beta to see if it fixes the issues such as the DTMF problem, Caller ID problem, and this issue, but the tech. wanted configs, fresh packet caps, and all kinds of stuff that shouldn't be necessary given that some of the issues I mentioned are supposedly fixed.
He was real helpful with regard to the config migration from SPA 2102 in that the old config to xml migation only works with a specific version of the SPC tool, which isn't mentioned in the "we're killing SPA2102, but it's OK 'cause you can migate" document.
Not sure if the 484 box crash is related to the issue discussed here, as it recovers, but one never knows if it causes some progressive issue with the box that after 10 or 20, it burns up all available memory, or something similar. Packet cap and syslog output of the event that crashes the box below.
23:06:37.954693 IP (tos 0x0, ttl 64, id 22296, offset 0, flags [none], proto UDP (17), length 830)
    10.33.90.60.sip > SPA122.8060: SIP, length: 802
        SIP/2.0 484 Address Incomplete
        Via: SIP/2.0/UDP 10.33.90.111:8060;branch=z9hG4bK-2817ba48
        From: ;tag=1481fc25925927f6o0
        To: ;tag=NNmBD3S5vZSyK
        Call-ID: [email protected]
        CSeq: 102 INVITE
        User-Agent: FreeSWITCH-mod_sofia/1.2.0-rc2+git~20120624T003326Z~86df8b338e+unclean~20120624T044059Z
        Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, UPDATE, INFO, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE
        Supported: timer, precondition, path, replaces
        Allow-Events: talk, hold, presence, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer
        Reason: Q.850;cause=16;text="NORMAL_CLEARING"
        Content-Length: 0
        Remote-Party-ID: "4669" ;party=calling;privacy=off;screen=no
23:06:37.973366 IP (tos 0x68, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 635)
    SPA122.8060 > 10.33.90.60.sip: SIP, length: 607
        ACK sip:[email protected] SIP/2.0
        Via: SIP/2.0/UDP 10.33.90.111:8060;branch=z9hG4bK-2817ba48
        From: ;tag=1481fc25925927f6o0
        To: ;tag=NNmBD3S5vZSyK
        Call-ID: [email protected]
        CSeq: 102 ACK
        Max-Forwards: 70
        Proxy-Authorization: Digest username="4331",realm="10.33.90.60",nonce="455f6ec0-c0ce-11e1-bdff-c9d1f242411e",uri="sip:[email protected]",algorithm=MD5,response="e59568b7cab23ca5081d697b612fef0e",qop=auth,nc=00000001,cnonce="be94babd"
        Contact:
        User-Agent: Cisco/SPA122-1.1.0(011)
        Content-Length: 0
Clock in ATA is slightly diferent than NTP locked server, but death begins at 23:06:37
<4>Jun 27 23:06:35 SPA122 [17179877.700000] In cordless Driver Codec 100 and str NSE/8000 chan 0
10.50.50.1 27/06 23:06:29.268
<4>Jun 27 23:06:35 SPA122 [17179877.700000] In cordless Driver Codec 112 and str encaprtp/8000 chan 0
10.50.50.1 27/06 23:06:29.268
<29>Jun 27 23:06:37 SPA122 msgswitchd[380]:   MSGSWD RTCP Reqt len 12 Data 2,35,7304,0
10.50.50.1 27/06 23:06:31.359
<4>Jun 27 23:06:37 SPA122 [17179879.824000] RTCP is running so calling rtcp stop
10.50.50.1 27/06 23:06:31.390
<4>Jun 27 23:06:37 SPA122 [17179879.824000] chan->kmode is present not null
10.50.50.1 27/06 23:06:31.390
<4>Jun 27 23:06:37 SPA122 [17179879.828000] ###### RTCP sock_sendmsg return 172
10.50.50.1 27/06 23:06:31.390
<4>Jun 27 23:06:37 SPA122 [17179879.836000] ###### sock_sendmsg return 172
10.50.50.1 27/06 23:06:31.390
<4>Jun 27 23:06:37 SPA122 [17179879.836000]
10.50.50.1 27/06 23:06:31.452
<4>Jun 27 23:06:37 SPA122 [17179879.836000] #### RTP STOP Flag set in this channel break ####
10.50.50.1 27/06 23:06:31.452
<6>Jun 27 23:06:37 SPA122 [17179879.888000] cordless: deinit
10.50.50.1 27/06 23:06:31.452
<6>Jun 27 23:06:52 SPA122 [17179894.068000] cordless: loading synergy-2012-01-18
10.50.50.1 27/06 23:06:45.757
<6>Jun 27 23:06:52 SPA122 [17179894.108000] cordless: init successful
10.50.50.1 27/06 23:06:45.757
<13>Jun 27 23:06:54 SPA122 msgswitchd: MSGSWITCH fd_rtp fifo created 12
10.50.50.1 27/06 23:06:47.817
<13>Jun 27 23:06:54 SPA122 msgswitchd: MSGSWITCH fd_ch fifo created 14
10.50.50.1 27/06 23:06:47.817
<13>Jun 27 23:06:54 SPA122 msgswitchd: MSGSWITCH fd_gmep fifo created 15
10.50.50.1 27/06 23:06:47.817

WRT330N needs new firmware!

I have owned a WRT330N since April 2007, and have noticed several issues with the unit. Some may be specific to my unit, but some are firmware related. What is most troublesome is that I reported the single port forwarding bug to Linksys back in May 2007, and they still have not produced new firmware...
I list these issues not so much for help from this forum, but to share information with those who already own a WRT330N, or are thinking about getting one. These issues still exist with the newest firmware (1.00.3).
Issue #1: Single port forwarding bug. Although the pulldown would indicate that you can specify TCP, UDP, or Both, no matter what setting you configure, it always displays (and saves) the protocol as TCP. I confirmed this by trying to single port forward TeamSpeak and setting it to UDP. Did not work. If I go to Port Range Forwarding, and configure it for a single port and for UDP, TeamSpeak works fine. Thus, all my single port forward rules that need UDP or Both have to be listed under Port Range forwarding.
Issue #2: Over time, I have changed MANY settings on this unit. Most recently, devices attached to the WRT330N would periodically be unable to communicate to the router IP (192.168.1.1 by default). Pinging the IP just timed out. This condition would happen several times an hour, but only for a second or two. Reflashing the firmware seemed to resolve the problem. Note: this was not a firmware upgrade, I was already at 1.00.3; I just reflashed 1.00.3.
Issue #3: Config file bugs. I have noticed that if I change a LOT of settings on the unit, then save the config file, I am unable to load the config file (router claims it is corrupted). This occurred not only on my WRT330N, but also on my WRT54GX as well. However, I did notice that I was able to save, then successfully load, the fully customized config file immediately after reflashing the firmware.
Issue #4: Along with #2, the wireless transmitter seems to stop broadcasting for a minute or two several times a day. I will have a perfect connection for hours, and then bam, no signal. A minute later the signal returns. This issue MAY have disappeared after reflashing.
Linksys is sending me a replacement unit in case this is a hardware problem, for which I am grateful. Unfortunately, this will not resolve #1 or #3, and Linksys' refusal to release new firmware is most troublesome.

Hello,
Just adding my name to the list of folks who believe that this router does need new firmware. I had a WRT54G v2 for serveral years and as of late it had developed the bad tendancy to do something very odd with DNS queries, after a hard reset it would clear up for a while, but eventually would come back. I figured that after several firmware updates over the years I'd just gotten a bad flash.
I picked the WRT330N to replace it primarally just because I wanted a router that had a Gigabit Switch integrated and had prior good luck with LinkSys products. It just seems that the new router doesent have some features that the old one did (i.e. it's a step backwards).
1. If I port forward port 80 to my web server, and then use my external domain name which goes to my external IP, the router doesnt get me there. My WRT54G did this with no difficulty.
2. I could find no option to disallow access to the web configuration from the wireless.
3. The router seems to reboot whenever you change trivial settings. Much more often than the WRT54G.
I dont know if LinkSys product planning looks at this, however I for one would say that I'd be happy with a WRT54G that was just updated with a Gigabit Ethernet Switch and otherwise all the same features as it had previously (including keeping the form factor that stacks on other linksys devices).

Do i need new Firmware

Im new to all this electronic stuff, so im going to come across as someone who is thick
When i asked my phone what my firmware was, it gave me this:
V3.0617.0.6
03-05-2006
RM-92
Nokia N80 (31.01)
Can anyone help!?

You don't need new firmware just because it's available - you should only look at getting it updated if you are experiencing problems. I think some NSC's may refuse updates if you're not having trouble.
There are many topics on here relating to the bugs in the N80 - search for them and see if you're having any of the problems mentioned.
If you are experiencing faults / bugs, contact your local Nokia Service Centre and discuss it with them.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Need new firmware for the drive (Mat****a UJDA750)

I have a Satellite M30 with a Mat****a UJDA750 combo drive. Does anyone know where I could get a new firmware for the drive?
Thx.

Hi,
It would be up to Toshiba to release an official firmware update for this drive and at the moment they do not have one.
You could of course look at 3rd party sites such as cdfreaks.com.
Regards,
Nick

We Need New firmware for N85!

A new firmware update is necessary for Nokia N85 because there is a lot of Bugs and Error even on latest (30.101) firmware

hey i've been having the switchin off problem too..does it also happen when you recieve calls?
i've noticed it doesnt occur while using loudspeaker or a headset..try it out..
plus my phone's not updating to 30.101(update package incompatible)..so do u think it's really a firmware issue?

D-Link DBT-120 USB adapter needs new firmware update from Apple

I purchased a new DBT-120 USB/Bluetooth adapter for use with my iBook (Clamshell). unfortunately, it's not allowing connections to headsets as I intended.
I have a DBT-120 B1 at home which works fine with my headset but that adapter worked only after updating the firmware with Apple's updater.
unfortunately, the firmware updater will not recognise my new DBT-120 which is a C1.
Apple, please update the firmware updater for the new C1... soon!
has anyone else written a firmware updater for the DBT-120 adapters so that headsets can be used with OS X?
regards,
Gregory

I have the same problem w/ my DBT-120 v. C1
I tried installing bluetooth firmware 1.2 and Bluetooth Firmware Updater gives me the error:
"This Bluetooth device is not supported
This computer does not have an Apple Bluetooth module installed. It cannot be updated by this application."
I also tried installing version 1.2.1 but during installation that gave me the error: "This update is not needed on this computer."
I have an iMac Intel Core 1 Duo 17" that will hopefully support the headset when it finishes charging, but I would like to be able to use it on the go too.
iBook G4 14 1.2GHz, 512MB Mac OS X (10.4.8)

Re: Satellite L30-105 Vista - Power Calibration Error - need new firmware

Hey there guys =)
Ive got a Satellite L30-105 running a 32-bit Vista. And even if i try several different burning softwares (Imageburn, Nero), and with TDK-cds, I get a error from the burning softwares, saying "POwer Callibration Error".
The Satellite L30-105 (Article number PSL33E-02S026N5), uses a cd/dvd burner called MAT****A DVD-RAM UJ-850S
I am wondering, can i download and install new drivers for my dvd-drive???
i am also gonna try to buy this "cleaning-cd", to try to clean the lense. cause i bought the laptop in 2007... so its like grandma..
But do u guys have any other what might be wrong?? Is it expensive to get a new cd/dvd-drive for this laptop???
Cheers and thank u!

Hi
Power calibration error means that the ODD laser lens cannot calibrate in the right position.
Usually this has nothing to do with an drive firmware but with the hardware problem.
In most cases the CD/DVD drive must be replaced.
Im not sure how much an new CD/DVD drive could be but fact is that you cannot use any CD/DVD drive
You need an compatible one and such compatible and supported drive could be ordered from an local ASP.
greets

Need new firmware for x3-02....plz nokia make it a...

the old firmware v 6.0 is not good ....it use my battery more ...plz nokia make a new one.....

CharleyDog wrote:
I posed the last question after being unable to access the necessary websites. Following a full anti-spyware run, I succeeded. My router showed firmware version 3.0.02, which I believe is the latest. If so, this ends my question. Thank all of you for your help.
Yup, that's already the latest. You can refer to the link below. Your router is version 3.
http://homesupport.cisco.com/en-us/support/routers/WRT160N

N85 need a new firmware with CPU Clockrate upgrade...

Just Like Nokia 5800XM we need new firmware with less bugs and also Upgrading the CPU clockrate to 434Mhz which possible as we seen it on Nokia 5800XM for N85
any Opinions about it?
Message Edited by saeid1371 on 24-Sep-2009 11:45 AM

That is not going to happen as the processor on the N85 is already running at it's maximum clock speed.
The 5800 was underclocked (not overclocked) due to instabilities of the new v5 operating system. Once they had fixed the problems they restored it to it's actual speed.
Nokia will never overclock a device so it is not possible to increase the clock speed of the N85.
If you want a faster but similar phone you will need to upgrade to an N86.

HT201407 When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course i couldn't without deauthorizing my account then reauthorizing. I need help!

When I did the latest update, my phone was wiped out completely. My laptop that I had everything on, crashed. I have a new laptop, tried to update on it and of course I couldn't without deauthorizing my account then reauthorizing. I need help! I want my ringtones and picturesd back, and can't get them. Does anyone know how to do this given my situation?
Thanks!

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

HT1420 My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize n

My laptop crashed completely and I need to authorize a new laptop to enable it sync with itunes. I have 5 computers authorized so I am unable to add another one so I need to unauthorize the bad laptop that is no longer working. How do I authorize new Laptop?

You can only deauthorize everything to do that. Click on Account under Quick Links. You can deauthorize all five there. But you can only do this once a year.

New Zen need a new firmware upd

I was looking for some solution to some problems I encounter with the new Zen 8gb
. I notice that when you turn on the device it flicker and the Zen display Flicker after it is on.
But here is a list of suggestion I found on line that I agree needed to be added to a new firmware.
I also bought the new Zen 6gb.
The new Zen Firmware should include
* Add bookmarking ability to video
* add more book marks
* Integrate SD card into the main library like ever other player
* MSC/MTP Option
* More Codec Support: OGG, FLAC, ect...
* Nati've video support like the Zen Vision:M (dont know if this is possible, but it would be nice)
* ability to copy from SD to main memory and back
* FM Recording

So you are changing from 32 bit to 64 bit? Are you likely to move up to 4GB RAM or more at any time in the future? If so you have three choices:
1. bin the extra RAM
2. if you stay on a 32 bit system, recompile your kernel
3. install a 64 bit system and be done with it
I am writing from my brand new 64-bit install (put the new motherboard in this pm )
fwitiw, I've got a separate home partition as well as one for multimedia and a few more for other personal and business stuff. My / is pretty much on its own so using another system is no bother - it looks the same, smells the same, heck, it even tastes the same. One difference I noticed though was that when I click on openoffice I can't even say Gorden Bennett before the whole suite is up! Like shit off a shovel

WRT54GX2 Rebooting - Windows XP SP3 issue??? New Firmware Needed?

Have a WRT54GX2, version 1.0, with firmware 1.01.22. Maybe a month ago noticed that I had to power cycle the unit once a week to get my Pap2t voip to work better. Got back this weekend from a trip, noticed that it was rebooting, sometimes as often as every few minutes. Yanked it out, tossed in an old Airlink until I could troubleshoot. Started digging around, and could not find any good reasons for the rebooting. THEN, I noticed via online searches that the Windows XPSP3 release that recently came out has caused some documented and confirmed problems with other wired/wireless routers. Here's a quote;
Broadband modem/router maker Billion says XP SP3 has been causing its BiPAC 5200-series routers to go into a constant crash and reboot cycle.
The company has produced firmware upgrades that solve the problem, which relate to a bug in Billion's code, not Microsoft's. It relates to the fact that Microsoft has started issuing "flag 43" as part of DHCP messages to the modem -- something that has been built into the DHCP specification for 11 years, but not actually used in Windows until XP SP 3.
Although Windows XP SP3 has been available for manual download from Microsoft since May 6, it has just hit Windows Update as an automatic upgrade, which will cause unexpected problems for owners of “unpatched” Billion BiPAC 5200 routers, and possibly other brands or models of router.
Is there someone here from Linksys that can address this??????? As of the time of this posting, the latest firmware is still 1.01.22 that I could find.
Thanks.

No responses here, so I did the online support, went through the chats, one "tech" said that the computer operating system didn't matter or have any effect on the router! I finally got it escalated, had someone call me. At least this person was able to acknowledge that there was a problem. She could not provide any additional information, but said to "keep checking back" to the support pages, for a new firmware to be released. I asked several times if for sure there would be a fix for my older router, and each time she just repeated to "check the support pages".
I seriously doubt that any units more than a year old will be supported by the factory, given the other posts here, as well as the lack of responses by anyone from Linksys to any difficult or non-standard technical questions.
(Mod note: Edited for guideline compliance. Thank you.)
Message Edited by Vince_02 on 07-31-2008 07:19 AM

I purchased Acrobat Pro in December of 2014 and installed it on my computer. That computer crashed recently and I need to intall it on my new computer. Can someone please tell me the process to do this. Thanking you in advance.

I purchased Acrobat Pro in December of 2014 and installed it on my computer. That computer crashed recently and I need to intall it on my new computer. Can someone please tell me the process to do this? Thanking you in advance for your help. Tony

Install it just as you did before. You should have backed up the download to a CD or backup HD and have the S/N archived with the backup. If you did not backup (please do in the future), you can download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html unless it was an upgrade (I don't think you can use these files for upgrades).

SPA112 Crashes - No dialtone, restart needed - new firmware

Similar Messages

Maybe you are looking for