SPA112 - Firmware 1.3.2(014) no longer logs

After upgrading the firmware of my SPA112 to 1.3.2(014), I cannot view the kernel or system log any more.
The Log Module window shows the kernel and system services both have log enabled with a priority of Notice. Both have Local checked. In Log Setting, the size of Log is defined as 1024 KB.
In Log Viewer, I used to be able to view the log when I set Display to anything other than "Select an Item". It doesn't show the log any more. I cannot even download the log. The downloaded text file is always empty, i.e. size is 0 (zero) KB.
Am I missing anything?
Thanks in advance.
(System Information)
Model: SPA112, 2FXS
HW Version: 1.0.0
Boot Version: 1.0.1 (Oct 6 2011 - 20:04:00)
FW Version: 1.3.2 (014) May 9 2013

I had the same problem, so I reverted to 1.3.1 and the logging started working again; thus, it's definitely something in 1.3.2.

Similar Messages

I can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected.

i can no longer log into my ichat linked to my gmail. right after opening up ichat, receive the following message: lost connection with jabber. the server has unexpectedly disconnected. how to troubleshoot? thanks.

Hi,
There can be many reasons why the Login is "up the creek".
Any break in the network at your end whilst logged in will cause an issue.
A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
If they don't agree the server will refuse to accept.
A Crash at the server end which does not log you out properly will also do it.
Any file at any time can be come corrupted.
Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
If it were AIM you can also get your Account Suspended and this will not log you in.
(It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
Most of the big IM services use multiple servers.
Sometimes these go out of Sync.
In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration. I am not sure if this happens at Google.
You seem to be talking about an account that has worked at Work and having new computer at home.
As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in (this will kick the work Computer out of Google whether you are logged in on the Web Mail page or in iChat)
IN addition to that iChat stays partially logged in for Off Line IMs
This is done in the background by a support app called iChatAgent
If your Computer is ON but ichat is not started people can still send you Messages.
Instead of saving these on the server until you login iChat will start up.
Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them. If this happens you get a warning and messages to do something about it.
You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
This should show all pics as their icon.
Check that all display properly.
At this point I would try a COMBO version update install of the last Update you did over what you have.
This often corrects hard to trace things
The 10.5.8 COMBO is here
11:28 PM Monday; June 20, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

After recent OS update (10.8.2) I can no longer log into icloud.

After recent OS update (10.8.2) I can no longer log into icloud. I've reset password, but when I try to login on the icloud preferences panel it gives a little "bonk" sound and then spins forever. Open to suggestion. Thanks!

Signing out and signing back in seemed to do the trick as suggested here: https://discussions.apple.com/message/19827058#19827058

"You are no longer logged into your profile" - So....Palm just decides to delete my data???

I was told to post this over in this Palm forum also so hopefully SOMEONE from Palm/HP will address this... I could not find a bug report area but perhaps someone can log this.
So after months of (mostly) happily using a Pre Plus, Wednesday I get the message that I am no longer logged into my profile, and do I want to reboot or erase my data??!! I googled, and yup, it's an issue....So I reboot...same options, this reboot, it starts and asks me if I want English as my language. Woops!!! No data!
Now of course palm profile does not backup anything on my phone really....I sync direct to Exhange and use Chapura sync to a desktop Outlook PST file. So I spend the next 5 hours restoring and syncing. Just crazy. Why can't it just say that you are not currently logged in, we will try again in an hour?? And what right does palm have to delete MY data that the profile does not even backup??? My exchange and chapura sync'ed data? Sure, I can re-sync with both of those. But my Chapura only if I am on the same wi-fi network as the local PC. So what does that mean if I am traveling? And re-syncing a huge volume of contacts takes forever. And you lose all the linked contacts also!
So I call the carrier and Palm. The carrier says...."well if your phone originally was under another phone number and you changed it as part of an upgrade, that can cause it." Huh? This can affect me months later I say??? My phone number upgrade change was done BEFORE I even turned on the phone. Palm does not even know about that first number!
So I called Palm. The guy says it can happen if 2 people use the same e-mail or credit card in their palm profile. Now since it won't even allow you to setup the same e-mail twice, I'd like to know how THAT would happen. No one on my plan uses the same card.
So the question is. We know this happens sometimes. Is there any source with credibility that really knows WHY this happens??? And does any setting reduce the likelihood of it happening again? And why can't Palm make the results less debilating? There is NO REASON that it needs to delete your data. This is crazy.
Also, other than my few purchased apps, none of my critical data is even backed up by the Palm Profile!!! I still had to re-create all my POP3 accounts, change all my preferences back, re-sync with Exchange, re-sync with Chapura, and then re-marry all the contact duplicates that Synergy did not handle right. So what's the worth?
Can the Palm Profile/backup be turned off? Does changing the palm profile in the apps perferences setting from "submit password every 4 hours" (whatever that means) to only at purchase help??
Do you have any other options when you get that reboot r erase prompt? Pull the battery without answering the prompt perhaps???????
If I am on the road and this happened, I would be without half my contacts until I returned which is unacceptable. This is very disappointing. I cannot believe the default action is not "let's TRY AGAIN", and not, "hey, let's erase all of this user's data on him"!!!
If this happens one or two more times, I have had it. I will be looking at another OS and phone after having Palm phones and organizers for the last 10 years or so. This is unacceptable.
BJB

Thanks for the reply. Nowhere in here do I get the sense that Palm even thinks this is a problem or are going to work on fixing it. It implies Palm thinks it is okay and the problem is me, the user, the customer, because I do not want my data resided on Palm's servers or Google's servers. Does Palm understand this is an issue whether my data is on my home PC or in the cloud and in Palm Profile??? The issue is not how I choose to store just one of my calendars and contact lists (out of 3). The issue is a bug in the Palm profile system.
The first point is this.... Regardless of HOW this happens, Palm should not immediately erase all of my data!!!! Let's say I DID sync all my data to Palm Profile. I STILL would not want to have to re-download everything just because of some glitch with your backup servers, the carrier's network, or my phone!!! Go look at some pre forums. You will see many people that DO sync all of their data to their profile, and they are STILL upset with this Palm BUG. If security is the concern, how about asking for a password first vs. just asking whether I want to reboot or erase all data? If it is really me, I would know the password! Your answer seems to imply that what is happening is OKAY. It is NOT okay whether I sync everything to Palm profile or not!
Further, even if all my data WAS backed up to Palm Profile, you still lose all preferences, all manually matched synergy contacts, etc.... etc... Again, I would still be very upset if all my data was erased even if EVERYTHING was backed up to Palm profile. DON'T ERASE MY DATA!!!
I have no problem re-synching my exchange e-mail after a problem. It works from the road, etc. However after 10 years, Palm decided to not suport the syncing of home PC's with the Pre. An unfortunate decision as Palm was a pioneer in this. You talk about security....Perhaps some of us do not want our data stored on Palm servers or google servers!!! Yes, indeed, in the event of a crash I cannot restore from the road. I can live with this if the crash was from a hardware or software issue. But it is NOT OKAY if it is caused by Palm just because of some system glitch. Since you are not restoring my home PC data anyway, why erase it?
You talk about being logged out of your profile. My phone was just used, and it was sitting on my desk. Just sitting there. And then it popped up that "I was no longer logged into my profile". What causes this? Why does it not give me a chance to re-login? How come after the erase of data and reboot I was then magically "logged in" and it was working? Did the person that was trying to steal my non-existent data in my palm profile stop trying?
So are you telling me that someone was trying to use my phone SIM, on a pre plus, with my e-mail, and had my password....and trying to login, and that is why I got the message? And then magically right after I rebooted, they stopped trying and all was okay???
I do not believe that is the case. And again, if it is, ask for my password, or a security question, or SOMETHING to confirm that it is me. And a simple google search will tell Palm/HP that this is a problem many of us have had. If I have it consistently, as I said, a 10 year customer is gone.
BJB
PS. A reply that said: "Palm is aware of this problem and will correct it with the next software update" would be a lot more comforting.

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

I am trying to backup my iPhone but the email used for my Apple ID has been deactivated so I can no longer log into my account or back up my iPhone. How do I back it up otherwise? Or how do I change my email?

You can update your AppleID info here: Manage your Apple ID
Also check this page for more details about iTunes: Apple - Support - iTunes

Can no longer log in to my computer

I searched but did not see this problem. I also posted this question the networking forum and i asked that it be removed as this seems like a better place for it.
I have 3 iMacs and several PC's in my signshop and we are bound by AD to the main PC serer and we connect via DHCP. One particular shared user can no longer log into her user from any of the iMacs. She just gets the shaking password window. But she can log into her shared user from any of the PC's. And we can all log into our shared users from her iMac.
Thins we have tried.
1. changed her password and that did not work.
2. renewed DHCP and that did not work.
3. disabled and re-enabled her acount and that didn't work.
Any advice? I will check this from work tomorrow if you need any info from the PC IT geeks
thanks!!

Thank you for the helpful tips below. I had pretty much given up deploying Leopard in my public labs until AD binding became more stable. With the 10.5.3 update, I have had stable logins/binding to AD from May 30th, when I applied the update to my 'image' client until this morning (6/20/08).
My setup is public labs in university. Mac clients use netboot for imaging and I have one OD Master server controlling client admistration (login window messages, etc.) All network accounts are via AD (MS Server 2003) with 3 Domain Controllers.
Could you please be a little more descriptive on some of your suggestions? for example:
Before you bind: #2 -- Make sure a reverse zone is populated.
Populated where? On the DC or the client?
Before you bind: #4 - Make sure round-robin ...
Where? On the DC or the client?
Before you bind: #7. Set a simple name in sharing...
This is good for individual client setup. I have a situation where I create one master image and push this master image via netboot out to the clients. All of my clients bind to AD with the same computer name, but the clients themselves have individual local host names.
If failure occurs: #1 - Use dscl to try and browse the domain.
On the DC or client?
If failure occurs: #3 - Use dirt to hammer the directory
Not sure if my AD sys admins would appreciate this without forewarning! I would appreciate any insight you could give to my questions as I am building new images for Fall 08 semester now and would love to deploy Leopard, but will not until I am positive Leopard/AD autentication is stable. If you would prefer (and have the time) to discuss this further via email, please email me at [email protected]
Thanks,
Cheryl Tarbox
Binghamton University

Installed SAP Master and can no longer log into old xIEP portal

Hello there,
I am very new to SAP so please bear with me. We were experiencing J2EE Engine connection errors along with no connection to our SLD with our xIEP portal, so I tried to verify that all of our parameters were correct. I did this by checking prior documentation and opened up the SAP Master Installation and began to verify the settings for the current installation of NetWeaver 2004s that we have.
However at the end of the installation, I clicked on start and it began to install SAP Master. Now when we log into our xIEP portal, we can no longer log in with our user id and password, but are able to log in as Administrator.
I am afraid that when I installed the SAP Master, this might have replaced the old NetWeaver that our portal was running off of. Please tell me that this isn't true, and that somehow I can get access to our old portal. Any suggestions would be greatly appreciated. Thank you.

You might consider rebuilding the ECP virtual directory:
http://technet.microsoft.com/en-us/library/ff629372.aspx
With the EMS, procedure should be the same for Exchange 2010 and 2013.
Since you state that everything else is working, other virtual directories included (OWA for ex.), it's most likely something with the ECP virtual directory.
But even before that, I would try to look at the (rather cryptic) IIS logs and see if you cannot find any useful information there:
http://social.technet.microsoft.com/Forums/exchange/en-US/935eeb5b-d996-4933-9cbd-0347ebad801d/how-can-i-view-exchange-iis-logs?forum=exchange2010
There were some ideas in this thread but i think you may have seen it already?
http://social.technet.microsoft.com/Forums/exchange/en-US/1736b5ab-e69b-4637-aa59-f2d9bd54ead2/unable-to-access-exchange-2013-eacecp-webpage?forum=exchangesvrdeploy
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

I can no longer log into either of my banks on line. I have Safari 6.0.3

I can no longer log onto either of my banks. I have Safari Version 6.0.3(7536.28.10). I just did an update. On the apple bar there is https and a paddle lock. clicking on that it says I'm using an encrypted connection. I can't get past this. Help?

" On the apple bar there is https and a paddle lock."
That's standard. Has nothing to do with your issue. What happens when you try to log into a bank web site? What is the response?

OD client can no longer log in

I have a lab of 10.4.9 computers, all log in to an OD server. All has been fine for a year now, except that one suddenly would no longer log in. Any OD user. Only a local Admin would get in.
The message I get at login is:
"You are unable to log in to the user account "username" at this time" and "Logging in to the account failed because an error occurred. The home folder for the user account is located on an AFP or SMB server. Contact yor system administrator for help."
When I check in locally, I still can connect to the server, get online and everything. I checked the settings in Directory Access and al is fine there. I formatted the drive, reinstalled the OS. Still the same result.
Any suggestions for troubleshooting greatly appreciated.

Hi,
Would you please provides us the log file for further research.
Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email -> Post the log here.
Thanks.
Jeremy Wu
TechNet Community Support

I can no longer log on to itunes store

I can no longer log on to itunes store or icloud
Can someone help me?

I sure did, that was the second try. Still no change as of an hour ago.
Whatever it is, it's only effecting this specific ATV. I have a couple of them running a lot when all three of my kids are home.

On logged in sites when i click the back button im no longer logged in until i refresh

On sites where i am logged in, eg forums or sites where i have saved the layout such as the BBC website whenever i click the back button to go to the previous page i am no longer logged in and my preferences have been cleared and the page has gone back to its defaults state. if i refresh the page its all back to how i set it and i am once again logged in.
== This happened ==
Every time Firefox opened
== Friday evening/Saturday morning.

Hello Jeni.
That's how Firefox works. When you go ''back'' to a page where you were not logged in yet, you get logged off. Although it doesn't always work and if you refresh the page you get logged in again.
The basis of this behavior is that clicking "Back" will take you to a page that is stored in cache, and Firefox doesn't have (in most cases) to redownload the page information again (this is good because it speeds up browsing). You can disable this behavior, but it will mean that every time you press "back", Firefox will re-load the page again, and it will not be instantaneous like it is now.

I can no longer log on to facetime

I can no longer log on to facetime on my ipodtouch

Try removing the account in Settings - Facetime and logging in again.

Since updating every time I click on something another window intrudes and I can no longer log in to secure (bank etc) sites. What's happened and how do I sort it ou? It's become unusable

Since updating Firefox every time I click on something another site (v. dodgy looking) opens and I can no longer log in to secure (bank etc.) sites, what has happened and how do I cure it? It's reached the point where I no longer use Firefox.

Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.

N95 Firmware v20.0.015 Taking a long time

Hi,
Can anyone tell me how long the firmware update should take?
I have had the Nokia Software Updater "Downloading Updates" for about an hour.
I have a fairly fast internet connection if that helps?
Thanks
Bill

Something has gone wrong with the update or you tried to update using a dial-up internet connection.
You could try a hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. When the message 'Formatting' appears on the screen, release all of the buttons.
If this fails then your only option is a repair which will be covered under warranty.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.
.Message Edited by psychomania on 29-Nov-200712:52 PM

SPA112 firmware upgrade from 1.0.1 to 1.2.1 kills the SPA

I took a brand-new, unconfigured SPA112 out of the box, plugged it into DHCP-enabled network, noted it was running v1.0.1 firmware and attempted a firmware upgrade to 1.2.1 via the web management utility.
After reporting a successful upgrade there was no further response from the SPA112 to HTTP requests, neither was there any response to pings. ARP requests are responded to successfully. The IVR works (as well as the IVR ever works) until I selected to perform a factory reboot at which point the IVR stopped responding as well. Holding the reset button for 20sec does nothing useful. It's dead, Jim.
I've had this experience on another SPA112 as well under similar circumstances although there is nothing in the Release Notes for v1.2.1 to say that such an upgrade does not work.
My questions:
1)Is there any way of recovering these devices or do I need to send them back to Cisco?
2) How am I supposed to perform such a firmware upgrade?

Hi Matthew,
I tried upgrading the firmware upgrade from v1.0.1 to v 1.2.1 and I had the same problem. The device just stopped responding. I tried that in a lab and I figured out what exactly to do when you get in to a problem like that. So lets start off once again.
Snce SPA112 must get an IP first through a DHCP on WAN port. Connect the SPA 112 device according to the instructins told in this article till the step 3.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2775
Once you access the web GUI of SPA112 follow the contents of the following article and upgrade the firmware
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=2676
In your case I believe the window got stucked at the point when it says "The upgrade is successful" and then there was no further response to HTTP requests.
Restart the device and see if it works or not. If it does not then log in to the router web GUI and navigate to the ARP table and see what are the VLAN assigned to the IP address.
NOTE: Both the router and SPA should be in the same VLAN. This way only the device will respond to the HTTP requests. If they are in a different VLAN's, navigate to the VLAN and disable the LAN memberships. For example there are two VLAN ID 1 and 100. Disable the LAN ports for the ID 100 and only enable it for 1.
Navigate to the ARP table again and refresh it. Both the IP addresses should be in the same VLAN. If yes. Access the SPA112 with an IP address assigned to it again and navigate to Administration > Firmware Upgrade. You will see the firmware of the device has been upgraded.
(optional) Upgrade the firmware again. This time, it will go through and the device will restart.
Let me know if you still need any help.

SPA112 - Firmware 1.3.2(014) no longer logs

Similar Messages

Maybe you are looking for