SPA112 inbound ring tone too short

Hi there,
I use an SPA112 with a SnomONE PBX. On an inbound call the phone rings only for some milliseconds at the beginning of each ring signal.
Is there an option to adjust the ring signal length in SPA112 configuration?
Thanks a lot,
Philip

It seems not to be PBX versus SPA112 issue but SPA versus yours-analog-phone issue. The ringing signal on POTS is driven by Ring_Waveform, Ring_Frequency, Ring_Voltage. You need to configure it according your's analog phone requirements.

Similar Messages

Downloaded ring tone too low

I just got the phone, about 2 hours ago, its great. The only issue I'm having is that my downloaded ring tone is too soft. It Frankenstien by Edgar Winter so it should play loud enough. The ring tones that were on the phone are loud enough. How do I raise the volume on a downloaded one?

In itunes, go to the ringtones tab and select all downloaded ringtones. right click and click get info and under options, you can increase the volume slider all the way up if you wish to. then click ok. after that you have to resync your iphone with itunes to get the "louder" ringtones.

N96 - too much music, cant choose ring tone

is it me, or do they need to change the software slightly to not look for all music when you want to choose a ring tone in a profile setting... i have over 2000 music files and its impossible to find a ring tone youve uploaded to it, or one of the pre installed nokia ones for messages or alarms etc... i know you can start typing to search, but thats no good if you want to browse a short list or if you dont know the name of it...
is there a change request somewhere to send to nokia?

Does this still happen after re-booting the device?
If so i would remove at least half of all your tracks as i have heard of this many times on other devices such as the N95 and the 8GB version.
Message Edited by grayburn on 02-Oct-2008 05:11 PM
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

I have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music soung , game sound.

i have the same problem in my iphone. i can receive call and talk and listen too otherwise no sound at all like ringer tone , on-off click soung , video-music song , game sound.
i have tried to clean the audio jack too but result is the same. Can any body help me please.

No external sound or not sound at all - external or when using the earbuds?
Standard troubleshooting steps in order are; power the iPhone off and on, Reset by pressing and holding the Home key and Sleep/Wake or On/Off key simultaneously until you see the Apple logo and then release - ignoring the slide to turn off prompt when doing so, Restore.
i had it once before, restored the iPhone and it was solved, but i don't want to restore my iPhone every day.
Does this happen every day? If not, when was the last time this happened?
If you have sound when using the earbuds, another thing to try is insert the earbuds and start playing a song - making sure the sound can be heard with the earbuds. Without pausing the song, remove the earbuds.
If no sound is available with the speaker and a the troubleshooting steps do not resolve it or one of the steps does resolve it but the same occurs again, time to give AppleCare a call (800) 694-7466 or make an appointment at an Apple Store if there is one nearby.

X 3 Ring tone volumn is too low

My X3 mobile ring tone volumn is too low. Give me soulution to increase volumn of Alaram.

azeerka wrote:
My X3 mobile ring tone volumn is too low. Give me soulution to increase volumn of Alaram.
Ringtone volume and Alarm volume are two separate things... You can set the Ringtone volume by.. Menu-->Settings-->Profile-->.. select the profile you want to use..-->Personalise-->Ringing Volume...
..whereas for Alarm volume there is no such setting as mentioned by rohitms2711 ..but the work-around is use a tone that is louder..you can download some good ones from
http://www.zedge.net/?updPhone=3441

Ringing tone is too loud

When I give a call with my iphone4 using in ear headphone the ringing tone is far lounder that the voice of the correspondent. I need to lower manually the ringing tone when I wait to get connected then increase the sound level when my correspondent pick-up. If I forget to decrease the sound for the next call its a real real pain for my eardrum.
Is there any way of setting independantly ringing tone and conversation voice ?
thanks

The volume of the ringtone can be changed in Settings > Sounds.

I can't get my ring tones to sync to my new iPod touch 5.

I can't get my ring tones to sync to my new iPod touch 5. I see them in my tones folder, I've checked the "sync all" option and I've tried checking the individual tones and then sync. Each time iTunes says it has synced but the ring tones are not in the iPod.

Me too it has been all week and driving me crazy--- I've done everything I've seen on these websites to no avail--- does apple monitor these posts and offer any help????????

Error message 11556 wehn trying to create a ring tone

Can anyone help me to sort this problem out? I am new to this and cannot create a ring tone from a song that i have purchased. I am logged in to the i tunes store, but i get an error message that says that i can't connect. Several others seem to have posted similar problems but i wondered how i can solve the message and create a ringtone.

Hi
I have the exact same problem but have since found in the Itunes help section that you can only create ringtones with songs that have a bell next to them. None of my music has a bell next to it so have been onto Itunes store to seek out a song that has and cant find any.
Help option states to see tunes with a bell, click view, options then tick the ring tones option. This works with songs you have already downloaded but it reckons it works too for Itunes store but it doesnt.
Anyone know how you find out from Itunes store which songs can be created into ringtones?
Thanks

I use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

i use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

yes you can
A. how to make a ringtone using iTunes
First, open up iTunes in order to make a ringtone using iTunes. Find the song you want to turn into a ringtone by browsing through your music library.
Next, find exactly what part of the song you want to make a ringtone using iTunes. For example, if you want to use a specific section of the song from 21 seconds to 40 seconds, make a note of where you want the ringtone to begin and end.
Now, right click on the song you want to turn into a ringtone. Click "Get Info". Now, in order to make a ringtone using iTunes, click the "Options" tab.
Check the "Start Time" check box. Type in the point in the song where you want the ringtone to start in the format "minute:seconds" (e.g. the second mark would be 0:20). You can also be more precise by adding a period and putting milliseconds in after that (e.g. 0:20.150, would be 20.150 seconds). Also, click the "Stop Time" check box and enter where you would like the ring tone to end. Keep in mind ringtones can only be around 39 seconds maximum. Press "Ok". We are almost done making a ringtone in iTunes
Now, right click on the same song. Select "Convert AAC Version". If it is in another file format, you can go to "Edit" then "Preferences" and under the "General" tab click "Import Settings"; change the file format to AAC. After you select "Convert AAC Version" a new file will be created, but it will only be the segment of the song that you specified earlier.
Now, you have to find the file you just created. Right click on the new, shorter song and select "Open in Windows Explorer". The file extension should be .m4a. Rename the extension to .m4r by right clicking the file and selecting "Rename".
Now you can delete the shortened version of the song in your iTunes library. Then, double click the .m4r file and it will loaded into your iTunes Ringtone list. Now you can make a ringtone using iTunes!

Speaker system for 5300 to improve ring tone volum...

The ring tone volume for my Nokia 5300 is preset and cannot be changed (and made more loud/soft). It's fairly quiet overall. I checked with Nokia directly & confirmed that I cannot adjust it. As a result, if my phone is set down in the house, I cannot hear it ring, as it is too quiet.
Are there any speakers (system) I can plug my phone into so when it rings, it will broadcast through the speakers so I can hear it more easily when set down in the house?

I don't know the exact menu of your phone, but if you work through Settings>Call>Call divert it lets you input the number of seconds before each divert. Bear in mind that this will work only if your operator supports it. Operators get more revenue opportunities if you miss calls.
Chris
6230i (the last bug-free Nokia?)
Vodafone UK contract since 1992

Nokia 3110 Classic Alarm tone too low

I brought a Nokia 3110 Classic yesterday and found the alarm tone too low. Tried chaging the Tones, but all of them are too low. Not enough to wake up. can anyone suggest how to overcome this problem.
Thanks

get a loud tone there is no volume level for this if your havin trouble i will post a good loud one most nokias now have incremental volume ie get louder the longer they ring but i have good loud one
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia 5800 default ringing tone

How can I find those default ringing tone in my phone and delete them?
for example, at profiles>personalise>ringing tone there's a list of my sound track some are stored in memory card and some default (Chipper.aac, Diplex.aac..Etc) stored in phone memory. There is another mp4 file (freeheart.mp4) which I cannot find anywhere else except in the profile personalisation. Cannot be found in the file manager too.
Any idea how can I delete them?
Solved!
Go to Solution.

They are firmware embedded in the Z drive which is inaccessible to users.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Is there a way to change the ring tone to none for one particular contact?

I see there is an option to turn the text message settings for a particular contact to 'none'. Is there a way to change the ring tone to 'none' or 'silent' for only one contact. This is a person who calls way too often and I used to turn their ringer to 'none' when I had a blackberry. This way I can talk to this person when it is convenient for me and not have to listen to the ringer everytime they call.

You need to sync a silent ringtone to your phone & then assign it to that contact. Here's one already made:
http://richardkmiller.com/702/iphone-tip-use-a-silent-ringtone-to-screen-calls-i n-your-sleep

HT201272 What about ring tones?

This is the third time I have updated my iTunes on my PC and the third time i've lost my purchased ring tones, when i sync my iphone with the new version of itunes. It only happens to my ring tones, all other content is fine How do I get my ring tones back without having to pay for them yet again?

Steve Taylor1 wrote:
I do not think Ringtones can be redownloaded. You can only download at time of purchase.
This is why it is useful to have a backup copy of your ringtones and other media
Quite right. Details of what can be relownloaded here. Here is a suggested backup regime.
BTW Steve, congratulations on your new level. I look forward to seeing you in the lounge before too long.
tt2

UC560 CUE not working--gives error "your recording is too short, record a longer message"

I have a UC560 running Unity Express 8.0.3 that is having voicemail issues. After a CUE reload, if a call goes to voicemail the caller gets a message saying "your recording is too short, record a longer message"; at this moment, an error shows up in the CUE session saying "localhost postgres: voicemail aesop [local] idle in transaction: CRASH sql sql sql PANIC: failed to add item to the right sibling for "pg_largeobject_loid_pn_index". After this error appears, any calls forwarded to voicemail just ring until they eventually disconnect.
I have confirmed that we are not exceeding maximum storage.
Is this a corrupt database? Would resetting the CUE to factory defaults help?

Hi Mike,
Was your issue solved? as I am facing same issue.
Please share your solution with me.
Thanks.

SPA112 inbound ring tone too short

Similar Messages

Maybe you are looking for