SPA112 / SPA122 Report Rule - Delta / Status outputs

Hi,
I've been playing with the Report Rule and the documentation is not very clear when it comes to the two report options: --delta and --status
If I set the Report Rule to [--status]http://myserver/posthandler.php, I see the request coming in but the content of the POST is the actual config file (flat-profile) instead of the status (flat-status). Same goes when using the --delta
I am using 1.3.1 to test but I am sure 1.3.2 is probably not working as well.
Have anyone ever been able to generate a delta and/or get the content of the ATA status.xml file? I can get it from the URL (http://my_ata_ip/admin/status.xml) but would be neat to get it remotely too.
Thanks,
Benoit

I assume you are following Cisco SPA112, SPA122, SPA232D Analog Telephone Adapters Provisioning Guide
I see no --status nor --delta modifiers mentioned in Report_Rule option description. Just --key modifier is described here.
It seems that neither --status nor --delta modifiers are supported on SPA1[12]2.
As far as I know, status and delta reports are supported on SPA IP Phones (e.g. SPA[35]xx) only. The --delta is supported from 7.4.9c firmware onward, the --status has been introduced with 7.5.3 version. See Cisco Small Business IP Telephony Provisioning Guide for more information related to provisioning of this product line devices..
Rate useful responses. It will help others to found solutions.

Similar Messages

SPA122/112 Report Rule Fw 1.3.1-003

Has anyone been able to get the SPA122/112 Report Rule function working on firmware v1.3.1-003? I just tried it and got no results. It looks like it works fine on a SPA525G2 with the same SIP notify request...
My report rule is set to:
[ --status]tftp://10.4.2.1/$MA_status.xml
On the SPA122 In the syslogs I don't see anything showing that it's sending out the report but on the SPA525G2 IP phone it's showing "
<159>Reporting current profile to server (pldlen=84050)" in the syslogs and sending out the report just fine.
Here's my notify message that works fine with the SPA525 IP phone.
"NOTIFY sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 10.11.84.22:6;rport;branch=z9hG4bK518551
From: <sip:[email protected]>;tag=21090
To: <sip:[email protected]>
Authorization: Digest username=""xxxxxxx"", realm=""xxxxxxxx"", nonce=""xxxxxxx"", uri=""sip:[email protected]"", response=""xxxxxxxxxxxx"", algorithm=MD5, qop=""auth"", nc=""00000001"", cnonce=""xxxxxxxxxxxxxxxxxxxx""
Call-ID: [email protected]
CSeq: 21 NOTIFY
Contact: <sip:[email protected]:6>
Max-Forwards: 70
User-Agent: PHP SIP
Event: report status
Content-Length: 0
Edit: I just tried this on firmware v1.2.1-004 (which by the way is a horrible release), the report rule function doesn't work either.

As far as I know, the correct event name is just 'report', not "report status".
Your's SIP NOTIFY packet should not work even with SPA525G2. Well, the syslog message "Reporting current profile ..." is suspicious somewhat.
All at all, I tried to trigger Report and it worked for me on both 1.2.1 and 1.3.1. The only difference in my configuration is the event name (as mentioned above) and the report destination. I'm using https://.../... not tftp://

[CRS2008] Scheduling a report to multiple file output in single schedule

Hi,
Is there any way in CRS2008 / Infoview to scheduling one report to multiple file output in one schedule?
i thought maybe it can, but still not found the way.
Says,
I have one report say "Report by Branch.rpt", the parameter prompt is BranchCode.
I want to generate the "Report by Branch.rpt" for every BranchCode in separate output generate file. Like, "Report by Branch.rpt" for BranchCode A, or "Report by Branch.rpt" for BranchCode B.
So, if i run the schedule, it will generate several report based on the report parameter given.
Hope, would find the way.
Thanks in advance.
Regards.
Edited by: fritzwijaya on Sep 20, 2010 3:47 AM

For anyone still looking, the job can be seen under the Job History option on the home screen, but not on the Job History option under the report in the catalog - i am assuming this is becasue somehow im not referencing the report correctly in the ScheduleReport request message.
Also, the jobId returned is a parent jobId, which when used to poll the job status, always returns a 'Scheduled' status. Im now adding 1 to this ID to get the status of my job - this returns the correct status of 'Success'.
Still hoping someone has an idea on the getDocumentData question...?
Thanks.

How to setup provisioning report rule

Hello, I can understand that you can get configuration status from SPA2102 using a http//server/somedirectory/file.xml, I have tried that but nothing happening. DO I need to handle the POST from the device (how?) or I can only get it after requesting it?
The bottom line is I need help on how to monitor whether a device has downloaded the configuration file from my http server.

I have gone through the guide and manage to make config files and have the devices retrieve them, but the section on report rule is very short and not much is described.
I read somewhere in the provisioning guide that one can purchase Remote configuration (RC) unit from cisco. Any idea how I can do that?
Thanks.

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Report for PO status

Hello Experts ,
Can you tell me the standard report for the status of PO as in GR qty , value , in voiced qty & value etc & open qty & value ??
Regards

hi,
There is no direct report, but for a single material you can check the PO history from ME2N etc reports...
After executing the report there is the PO history tab...in it can see it individually...
But from the table you can see collectively...
Hope it helps..
Regards
Priyanka.P

Report to see the output of VLPOD transaction

Hi Gurus
I have configured Proof of delivery concept to caputre loss of Quantity due to moisture. can any body tell me about standard report to see the output of VLPOD transaction.Full points for the correct solution.

Hi,
Try the t-code VLPODL, hope can help you!
Good day
Tao

How to call the XML Publisher Report thro Standard PO Output for Comm.

Hi
We need to call our custom report(XML Publisher Report) from the standard PO Output for Communication Report.
There is a parameter(Purchase Order Layout) in PO Output for Communication in which we can see no. of standard reports. We want to add our custom report in that list so that when we will run this standard report by selecting our custom report for Purchase Order Layout parameter, we should get the output as per our Custom report.
Since PO Output for Communication is a Java Concurrent Program, we are not able to place our custom report in the list of Purchase Order layout Parameter.
Ram

Welcome to the forums !
Pl see if MOS Doc 305307.1 (How To Modify Print PO Report POXPOPDF With Custom Template) can help
HTH
Srini

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Download report to PDF at Output

Hi SDN's,
I am having a report which shows a output. Now my requirement is i need to download the Output of the Report as a PDF.
I would need to place a button on the appl tool bar, clicking on which should throw a popup of File Select Dialog.
Upon giving the filename, the output should be downloaded to the filepath mentioned.
I have already achieved the placing of button on the appl tool bar.
But my Question is how to show a popup of giving a File Select Dialog upon clicking the button.
And now Function module : CONVERT_OTF_2_PDF is used to convert to PDF. Is this right?
Is my approcah correct. Please suggest me if i am wroing at any point.
Regards
Pratyusha

Hi,
I will give u sample code...
DATA: fm_name TYPE rs38l_fnam,control TYPE ssfctrlop, op TYPE ssfcompop,
      p_form TYPE tdsfname VALUE 'ZTAX_COMPU',
      errtab TYPE tsferror,spoolid TYPE ssfcrescl.
DATA:t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
* Internal table to hold OTF data recd from the SMARTFORM
*T_OTF_FROM_FM TYPE SSFCRESCL,
* Internal table to hold the data from the FM CONVERT_OTF
t_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA:
*w_form_name TYPE tdsfname VALUE 'ZSURESH_TEST',
w_fmodule TYPE rs38l_fnam,
w_cparam TYPE ssfctrlop,
w_outoptions TYPE ssfcompop,
w_bin_filesize TYPE i, " Binary File Size
w_file_name TYPE string,
w_file_path TYPE string,
w_full_path TYPE string,pnrno(8),ldate TYPE sy-datum.
CLEAR control.
    control-preview   = 'X'.
    control-no_open   = 'X'.
    control-no_close = 'X'.
    control-no_dialog = 'X'.
    control-getotf = 'X'.
* control-DEVICE     = 'A000'.
    op-tddest = 'A000'.
    op-tdnewid = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING formname           = p_form
*                 variant            = ' '
*                 direct_call        = ' '
        IMPORTING fm_name            = fm_name
        EXCEPTIONS no_form            = 1
                   no_function_module = 2
                   OTHERS             = 3.
CALL FUNCTION 'SSF_OPEN'
       EXPORTING
*     ARCHIVE_PARAMETERS       =
        user_settings            = ' '
*     MAIL_SENDER              =
*     MAIL_RECIPIENT           =
*     MAIL_APPL_OBJ            =
        output_options           = op
        control_parameters       = control
      EXCEPTIONS
         formatting_error         = 1
         internal_error           = 2
         send_error               = 3
         user_canceled            = 4
         OTHERS                   = 5
CALL FUNCTION fm_name
EXPORTING
*     ARCHIVE_INDEX              =
*     ARCHIVE_INDEX_TAB          =
*     ARCHIVE_PARAMETERS         =
      control_parameters         = control
*     MAIL_APPL_OBJ              =
*     MAIL_RECIPIENT             =
*     MAIL_SENDER                =
      output_options             = op
      user_settings              = ' '
      emp_no                     = itab-emp_no
      proc_yyyymm                = procyymm
      category                   = itab-category
      sp1                        = wa
      sp2                        = wa1
      itexem                     = exem
    TABLES
      it_etc                     = it_etc
      it_f16                     = it_f16
      it_hrc                     = it_hrc
   EXCEPTIONS
     formatting_error           = 1
     internal_error             = 2
     send_error                 = 3
     user_canceled              = 4
     OTHERS                     = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_CLOSE'
    IMPORTING
      job_output_info = spoolid
    EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      OTHERS           = 4.
IF sy-subrc <> 0.
*   error handling
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
REFRESH : it_etc,it_f16,it_hrc.CLEAR : it_etc,it_f16,it_hrc.
t_otf[] = spoolid-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
     format                      = 'PDF'
     max_linewidth               = 10
   IMPORTING
     bin_filesize                = w_bin_filesize
*   BIN_FILE                    =
    TABLES
      otf                         = t_otf
      lines                       = t_pdf_tab
   EXCEPTIONS
     err_max_linewidth           = 1
     err_format                  = 2
     err_conv_not_possible       = 3
     err_bad_otf                 = 4
     OTHERS                      = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR:w_full_path.
IF itab-pnrno NA sy-abcde.
    UNPACK itab-pnrno TO itab-pnrno.
ENDIF.
pnrno = itab-pnrno+2(8).
* SHIFT pnrno LEFT DELETING LEADING '0'.
CONCATENATE path '\' pnrno '.pdf' INTO w_full_path.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      bin_filesize = w_bin_filesize
      filename     = w_full_path
      filetype     = 'BIN'
    TABLES
      data_tab     = t_pdf_tab.
CLEAR w_full_path.
CONCATENATE 'Download completed for Employee - ' itab-emp_no INTO w_full_path SEPARATED BY space.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
   EXPORTING
*         PERCENTAGE       = 0
     text             = w_full_path.
CLEAR : t_otf,spoolid, t_pdf_tab,pnrno.
REFRESH : t_otf, t_pdf_tab.
Regards,
V.Balaji
Reward if Usefull...

CJE0 - Reports to be able to report on 'system status'

Hi there,
Is there already an ability in CJE0 reports, or other reports, to be able to report on 'system status' (Project status) in the dynamic selections by another name? If not can we get it added as a field choice in the dynamic selections list?
Thank you,
Barbara

Hi,
This thread will help you.
/message/5463977#5463977 [original link is broken]
Regards

PC - Generating a 'Dashboard' report on the status of the controls already planned for the 1st quarter of 2014, shows the control with status Submitted.

Hi;
I have a problem in GRC-PC I can't solve. My User is generating a 'Dashboard' report on the status of planned for the 1st quarter of 2014 (compliance controls), this controls not planned, but presented the control with status Submitted.
I appreciate any help...
Thanks all....
Regards....

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Need a report on delivery status and response status for capaign recipients

hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
thanks

Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
Response status - This shows message opened, click-thru's, opt outs etc
Delivery status - Hard bounce, soft bounce etc
To get more details from the above results add the following.
Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
Address Moved or Unknown Address only.

Automatic scheduling of report and send the output to user via email

Good Morning,
Please i need to scheduled report and send the output via email in Discoverer . Please can someone assist in how to achieve this ?

Hi,
You cannot schedule and email a Discoverer report using standard Discoverer scheduling. You have to use a third party scheduler and Discoverer Desktop running on a windows PC.
This presentation has some more details on how to do this.
Rod West

Run two reports but generate one output

I have developed two reports, one is a detail (portrait style) and another is a summary report (landscape). Now I need to provide an option that will run both the reports but display the output in one document (the document should contain both the detail and summary content).
Ideal scenario would be to call the report one after another but capture the output in one file but I am not sure whether it's possible in Reports.
Any help is highly appreciated. Thanks in advance.
Sundar

Hi DC,
Thanks for your reply. I tried to figure out how to create a new section by looking at the document i have (building reports), it directs me to create a new report block and treat it as a new report. Is that what you meant? I tried to follow the report wizard but it's only displaying the summary total columns not the details (i know it's difficult to troubleshoot without viewing the report). I just want to make sure i am at the right place creating a new report section.
Again thanks for your reply.
Sundar

SPA112 / SPA122 Report Rule - Delta / Status outputs

Similar Messages

Maybe you are looking for