Spa112 Synchronized Ring not working
Hi,
Does anyone have the feature 'Synchronized Ring' = Yes working?
(Voice, Regional, Ring and Call Waiting Tone Spec)
The idea is to have calls received on line one being picked up with phones on line 2. Line 2 is configured for a lower-cost voip provider while line 1 is configured for a voip provider that can serve incoming calls. I've got the different providers working properly, the last feature that is not working properly is this 'Synchronized Ring'. I would like to hide the more expensive line in a cupboard and have my wife use all lines on just one phone, the one connected to the cheaper outgoing line.
I've tested this feature in firmwares 1.3.2 (014) and 1.2.1 (004), but on both it failed to work.
Administration Guide, page 80:
Synronized Ring:
If this is set to Yes, when the ATA is called, all lines ring at the
same time (similar to a regular PSTN line) After one line
answers, the others stop ringing. Default setting: no
Greetings,
Gerben
Hi Gerben111 have you find a solution?? I'm looking everywhere without result. Thanks
Similar Messages
-
I just updated to iOS 6.1 today evening and in a few hours the ringer stopped working.
I have tried all of below
1. Check mute button,
2. Soft reset
3. Hard reset.
Nothing works. Suddenly when a call comes it will ring once and stop.
No keyboards clicks, cant hear music either.
When i put the call on speaker mode it doesnt work either.
Please help...I bought an iPhone 5 yesterday and had the same issue - ringer not working, no music through the speakers etc. I tried to back restore it but to no avail. I took it into a Mac shop and they were stumped too. I have iOS 6.1.3 on the phone.
A strange thing happened today. I use my phone as an alarm clock. I set it last night as I do normally (I had a 4S before) and this morning the alarm woke me up. I tried to play some music through the speakers and lo and behold it worked as did the ringer and other tones.
Not sure if this was pot luck or what but it maybe worth a try before chucking the phone out of the window!
I'd be interested to know if this works for anyone else. -
Hi, Export,
I have a SOAP<--->XI proxy synchronous scenario. it is not working after we upgrade PI7.0 to PI 7.1. I can see soap message is coming over in monitoring. And I can see it does everything that is written in proxy. But it just does not send any message back to SOAP as at the end of proxy indicated. Is there any body know what the problem is or advise me how I can find the problem? Thanks a lot!
MeiyingHi, Abhishek,
I can see the message coming to Proxy in SXMB_moni. But I can't see any message being generated and sending out from proxy. Let me give more information.
Outbound message interface SOAP_out_MI:
Request message type : Soap_in_MT
Response message Type : proxy_out_MT
Inbound Message Interface: Proxy_In_MI
Request message type : proxy_out_MT
Response message Type : Soap_in_MT
I generated a proxy under Inbound Message Interface: Proxy_In_MI, after some processing inside proxy, I call output-Soap_in_MT-result = it_result to send out the response message. But I don't see any message being sent out through SXMB_MONI. Is there any where I can see the log to see why no message being sent out? Thanks.
Meiying -
Iphone 6 App Audio and Ringer not working...
I'm completely stumped.... for some odd reason the audio in my phone stopped working for the mentioned applications, also the keyboard makes no noise while texting. However, it works just fine in youtube, music, and netflix for example. The ringer music works in settings while selecting it, but not when someone calls. I've checked all the settings (volume and ringer in max), restarted the phone, and tried different game applications, and still nothing.... Please help! I don't wish to go to warranty unless I know for sure its a hardware defect.... and I can't afford to continue missing calls.... my service provider is Sprint and I have the most recent version of iOS 8 in case that helps.
Your help is appreciated, thank you!
PS. A little out of topic, but ever since I owned the phone since October Siri doesn't recognize music playing (What song is this?), she always says "No music is playing" no matter how hard I've tried.IOS 8.1 comes out tomorrow if upgrading to that doesn't work you can try downgrading back to IOS 8.0
-
my ringer is not working and i need somebody to held me thanks
Is the silent switch on the side of the iphone on?
-
Ringer not working and only volume down
The phone only Vibrates will not ring volume up does not work only volume down works
Hi melvynfrommalvern,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that can help:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Regards,
Jeremy -
Before I start PLEASE don't jump in with all the "turn the mute button off" suggestions.
All settings are in the correct positions.
Yes I've reset and yes I've reset and restored/updated it through iTunes.
AT&T iPhone 4s will only vibrate when receiving a call. No ringtone.
When going through settings the test ringer works fine.
Please help!Mine was doing the exact same thing when I got my phone and, for the life of me, I could not figure out why. It turns out that the toggle switch above the volumn buttons on the side was turned on (showing red). This put the phone on silent mode making the ringers not function. Flipped the switch and voila, the ringers began working. Hopefully, this will solve yours as well since it sounds like my story to a tee.
-
E71: Speaker/Ringer not working
Hi All,
The loudspeaker on my E71 suddenly stopped working one morning. The morning alarm was just a vibration without the sound. I tried restart, battery reset and factory reset. No luck. The key tones and hands free works though.
Thought of taking it to the NokiaCare, and somehow struck to me to gently blow air on the speakers. Suddenly it started working. But not consistently. comes on and off.
What could be the problem? Is it a bad speaker component?
-Bejoy
Nokia 3310 | Nokia 1100 | Nokia 3110 Classic | Nokia e71 | Nokia Lumia 720
Solved!
Go to Solution.The speaker completely stopped working in a month. Took it to Nokia care and got it replaced under warranty in 30 mins flat. Thanks, Bejoy
Nokia 3310 | Nokia 1100 | Nokia 3110 Classic | Nokia e71 | Nokia Lumia 720 -
Ringer not working and also what does"Locked Sim" mean its on my other iPhone front screen
Hello,
I understand that you have two separate questions. To address your first, regarding your ringer:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
You also inquired about a prompt regarding the Sim card being Locked:
iOS: Understanding the SIM PIN
http://support.apple.com/kb/HT1316
Thanks,
Matt M. -
Iphone 4 Alerts Tones Not Working / Ringer Is WORKING KINDLY REPLY ME
HI , PLEASE HELP ME I WANT TO FIX THIS ISSUE THAT I AM GETTING PLEASE HELP
MY ISSUE IS IPHONE 4 ALERTS TONES NOT WORKING AND CALL RINGER IS WORKING.. PLEASE HELP ME!If the iPhone came from the US then it is locked to AT&T. To unlock an iPhone the original carrier is the only one who can unlock the iPhone and AT&T will not unlock iPhones. So there is not official way to unlock the iPhone 4.
At this point there is no way to hack the iPhone 4 running 4.2.1 to unlock it either so the phone and messaging apps will never work. You basically have an iPod touch. -
on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks
I'm sorry, but you are going to have to try a little better to explain your issue and what your question is, or post in your native language.
-
I can hear sounds when I plug in to headphones or on bluetooth (streaming audio from my car).
Can anyone help?
I have the iphone 4s.
Thank you!Hey Chris,
Unfortunately the ringer does not work - which causes the speaker to not work when it's switched on to ring mode, unless I'm on bluetooth. It has recently stopped working and I've had this phone for 2 years. -
I have Problem with ringer of my iphone 5S it is not working properly?
The ringer Of iphone 5S is not working properly, it sometimes misses the ring & play some annoying tunes Plz help me out...!
I checked my headphones with my ipad and my macbook aswell, the problem exists in the headphones with all these devices as well. So how do i claim warranty, should i approach AT&T store or Apple Store
-
Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.
-
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
Hi there,
Thanks for reaching out to the community.
Please help. Since I updated my Iphone4 to ISO 6.1.3...The ringer button not working, can't play any music (but ok with the dock), headphone sound is muffled. What can I do? I tried restoring and downgrading but it won't let me.
It appears like you may have a hardware issue with your ringer button and internal speaker that came to light after the update. If you have already restored your iPhone back to factory settings using iTunes, you may need to have your phone serviced.
Some potential good news... Check your headphone jack for lint. There may be enough to cause a muffled connection. You can try to blow it out with compressed air or very carefully pulling out any solid objects that may affect the connection.
Best of luck!
Maybe you are looking for
-
ORACLE 11g R2 POST Install Issue
Hi, I have successfully installed ORACLE 11g R2 on my windows 7 platform. The problem is that when i open the database control URL page and then enter my credentials, it fails to log in and says that an internal error has occurred. Please view the lo
-
Hi All, I am using CSAP_MAT_BOM_READ to read the BOM details of one material and using these detals i am creating BOM for other material. I am using CSAP_MAT_BOM_CREATE to create the BOM, But always it is returing sy-subrc as 1. I am not able to fi
-
Searching (CONTAINS) on OrdDoc columns...
I have a table containing an ordDoc column, among others: CREATE TABLE MY_DOCS (number ID, ordsys.orddoc DOC_BODY); The OrdDocs are a mix of PDF and Word, majority being Word. I have successfully managed to create a Context index on the document colu
-
Constant crash with managed library on external drive
I have never had a problem until lion installation. I have been through the basic steps repaired and reconstructed library reinstalled aperture with update repaired disk with utility from lion repaired permissions deleted plist cussed and repented It
-
Interface design V class design
Why is it more important for an interface design than for a class design to anticipate all possible uses for the interface?