SPA122 with 1.2.1 won't save certain DTMF settings

Upon upgrading the SPA122 to firmware 1.2.1 I found that outbound DTMF tones were no longer being seen properly by remote systems. Using the device web interface and changing the Line 1 "DTMF Tx Method" to "InBand" (using "Submit") successfully fixes the problem (G.711 and good link). However I find that after a reboot or power cycle the setting always reverts back to its "Auto" setting therefore again breaking DTMF.
It appears that the SPA122 with 1.2.1 is not actually saving the "DTMF Tx Method" setting.
Is this a bug or is there something I am missing?

Thank you. That is what is happening. I had performed the configuration change directly on the device. When I locally disable remote provisioning the overwrite on reboot does not occur.
... Next step is to dig in to why the "DTMF Tx Method" "Auto" setting yielded successful outbound DTMF in firmware version 1.1.0 but "Auto" fails to yield usable DTMF for me in 1.2.1.
Thanks, jb

Similar Messages

Firefox won't save privacy cookie settings.

I had a virus infect one of my home PCs. It came up as "Windows 7 Security 2012" and I could not do anything without that virus popping all kinds of authentic looking security screens.
I finally wound up using another of my PCs (which I am using now), to go into microsoft website, and download a scanner and malicious software removal programs onto a flash drive, which I then ran in safe mode on the infected PC. It seems to have worked, but now the problem I have in Firefox is as follows:
I cannot save privacy cookie settings. I don't want to set cookies on and I uncheck them in the privacy window. However, everytime I exit and reopen Firefox, the cookies are reverted to check marks. I tried the steps of deleting prefs files, and that did not work. I also upgraded to latest level of Firefox because it had been a while since I updated the browser.
None of that worked, and everytime I use Firefox, first thing I do is set privacy and turn cookies, which is too late anyway because I have to also delete the cookies that were set as Firefox was coming up.
This is the first time I have had problem with Firefox, but I also realize it could be because of the virus. I don't know what else to do because I upgraded Firefox and tried the suggested support steps for "Preferences not saved". I hate this also because I have to resort to Windows Internet Explorer, something I absolutely loath. Please help!!!!!

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Novice. Help with rendering. It won't save.

New at this so be kind. Using a Mac w/ Mavericks, PE 12. I'm rendering a 45 minute timeline. Takes about 4 hours (aargh!). Looks good, but then I save and either go to another project, or quit PE. When I start back up and open that same project, it hasn't saved my render. Antoher 4 hour wait. Why isn't it saving my rendered project?
Thanks,
Geno

Geno
To what are you referring when you mention rendering?
Are you referring to rendering the Timeline content to get the best possible preview of the Timeline content as it is playing back in the Edit Mode monitor? Or, are you using rendering to refer to export of your Timeline to a file saved to the computer hard drive or burned to disc?
From what you wrote it sounds like you are talking about rendering the Timeline content to get the best possible preview of what you have at the Edit stage. Four hours does sound a bit excessive for the process. But the process does depend on the complexity of the Timeline content and its duration. Some effects like Video Stabilizer can add many minutes to the rendering time in this case.
And, if we are talking about "rendering" for preview purposes, it is not uncommon to close the project with a rendered Timeline (green line over Timeline content) and reopened the project to find an orange line over the content, indicating need for rendering. This has been a long discussed and unanswered issue from time to time over many versions of the program. You will find that the preview files generated by the rendering process still exist in their hard drive save location, even though you are seeing that orange line.
My recommendation in cases like that is to move on if you have previewed those files previously. And, if you need a preview, then re-render either the whole or a selected segment of the Timeline. To do the selective rendering of the Timeline, set the gray tabs of the WorkArea Bar to span just the segment to be rendered.
Much of this is probably new to you and you may wonder what is that person talking about. If that is the case, please do not hesitate to ask for clarification, and I will rewrite until we communicate and you are comfortable with the information. We can go step by step or at whatever pace you prefer.
But, first we need to be in sync on what type of rendering is being addressed here.
Looking forward to your follow up.
Thanks.
ATR

4s with ios7 landscape pictures won't save in landscape view

When taking a picture in landscspe view the picture keeps being saved in portrait view. Is the a setting I am missing?

Do you have portrait orientation lock engaged (small lock icon with circular arrow surrounding, next to battery icon at top of screen)?

I want to save certain tab settings and have them automatically set up by MF whenI log on

I want to save tab settings so when MF opens it opens those tabs from previous sessions automatically for me.I have several websites/tabs to which I always want instant access & would like to save (and edit to add/remove) as perpetual settings.
thanks for your great support :-)

pin tab?
or pick your poison from one of these tab extensiosn:
https://addons.mozilla.org/en-US/firefox/search/es?q=tab
I personally endorse Tree Style Tab
* https://addons.mozilla.org/en-US/firefox/addon/tree-style-tab
* http://piro.sakura.ne.jp/xul/tabextensions/index.html.en

My brushes won't work with actions in Photoshop such as Save the Dress, Ying-Yang, or Foundation

When I try to use my brushes with actions in Photoshop, such as Save the Dress, Ying-Yang, or Foundation, they won't work. I've tried resetting the brushes, changing the opacity, restarting the program, and unlocking the layers. It was working perfectly, but suddenly just stopped. When I click on the image, it doesn't do anything. There is also a small black box next to the action the I am using in the history box. When my brushes were working, that box would show in white where I used the brushes on my pictures, but now it doesn't register anything that I try to do.

christyh61213853 wrote:
Have u gotten an answer from anyone on ur situation with the brushes? I am unable to use my brushes as well and I can't figure it out also...
You would do better starting a new thread, rather than bump a thread from 2012. Some of those posters might not have used this forum for years, and a lot has changed regards both Photoshop and operating systems since 2012
You need to give specific information about _your_ problem.
What version of Photoshop?
What operating system?
Which brushes, and if not standard, where did you get them from, or did you make them?
What is happening, and what have you tried so far to fix it?

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

Won't save as a version with photos on external hard drive

Ok...think this is my last problem of the night. At the end of each month I move all of my photos from my laptop to the external hard drive, but when I finally get around to editing them while they are being accessed from the external hard drive it won't save them as a version of the original photo. That box is actually grayed out on the "save" screen in the Editor.
Any ideas would be appreciated. Thanks. Amy

PSE 6...sorry I didn't state that and Windows XP.
Thanks. Amy

Music won't save to file gallery with 5800 express...

I downloaded songs from the web before, but recently, they won't save to the file gallery. It just says music downloaded, but doesn't save. I can add music via ovi or dragging and dropping on my laptop, but not by downloading from sites on the web. I show 5.7GB free space, so memory card isn't full either.

Did you refresh the Library to confirm this ?
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Apple Mail won't save "Use Autodiscover service" with Exchange

Apple Mail is discovering the wrong servers when connecting to Exchange. I want to set it manually so I uncheck "Use Autodiscover service" and put in the correct servers. But when I quit and restart Mail, it automatically rechecks "Use Autodiscover service" and automatically picks up the wrong servers again. Can some one suggest why it won't save my setting and how to make the unchecked setting stay unchecked?

Well first, I'd recommend your IT folks configure Autodiscover to return the correct results ;-)

Voice Memos won't save my recordings?

I'm in college so I usually record my classes for further detailing, but I just recently discovered that Voice Memos just won't save my recordings like 2/5 of the time. I already lost like 4 important ones for the past 3 days.
The thing is that I see it recording, but it just doesn't save it, and it's just sitting there at 00:00:00 with the name tag I had put. I want to die.

- Does you iTunes library already contain a Voice Memos playlist? Some users have had to manually create it in order for the sync to occur.
- Also try resetting your iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Photos won't save to camera roll

Since I installed iOS7, all the pictures I take with the camera won't save to camera roll. I see them in the lower corner of the camera but when I click on it, they are not in the camera roll. In the camera roll, I just have a bunch of pictures that I deleted months (or years!) ago. I uninstalled my profile and reinstalled it two or three times with always the same result.
All the settings are ok.
I installed the profile of a friend on my phone to test it and everything works fine with his profile.
Anyone can help me out with this issue?

bluetooth is an APPLE issue: they have blocked many of the 'normal' bluetooth features on 'other' handsets..
an example you may be thinking of is Sharing a photo via Bluetooth .. simple everywhere else, but can not be done on iphone
-you have to use it via an app such as iphoto, or send it attatched via an email, from the iphone.
stupid, annoying, yes.

My iPhone 4 refuses to save pictures and at some instances, delete my existing pictures. I take a picture, and then go to camera roll and look, but it doesn't show up. The same thing happens when I try to screenshot things; it won't save.

My iPhone 4 is severely making me mad. It won't save any pictures I take. I will take the picture, then go to view it in the Camera Roll, and it just won't be there. The same thing occurs when screen shotting things on my iPhone. Some times it won't even let me delete the existing pictures I had on my phone before this all happened. I will click delelte, then it will pause, and eventually close me out of the photos app. However, when I go to settings, it says I have 440MB of pictures on here somewhere. But I can oly see 3 pictures in the camera roll. Also, it says in the camera roll app that it is 'Restoring...' then just sits and loads and won't restore anything at all. HELP ME PLEASE. I have iOS 7.1 currently installed.

Have you Tried Clearing the The Cache in the Camera or Gallery in your Applications Area.. Go to Settings--> Applications--> Manage Applications--> Select All--> Clear the Cache in Both the Camera & Gallery Clearing the Data however might Clear you Pictures in your Gallery but if your Ok with it Give it a Shot,

Updated iPhone 4 to latest ios7 and now my camera won't save any photos to my albums

Updated my iPhone 4 to the latest ios7 and now my camera won't save photos to my albums? How do I fix that?

Okay, mine now works here is what I did.
plug in the iPhone, iPad etc
in iTunes select the phone or iPad
Under Summary uncheck "Sync with this....."
Under "Music" uncheck the "Sync Music"
Let it remove all the songs, dont worry it will come back no problems.
Once that is all done all the music on the phone or ipad should be gone.
Now check them both back on and everything should copy back onto it.
Working now !!!!!

HP Officejet Pro 8600 won't save scanned document in searchable PDF or .rtf format

HP Officejet Pro 8600 won't save scanned document in searchable PDF or .rtf format
The scanner scans the document without a problem but when I select 'SAVE' and
specify a location and file name, a system error 'The HP scan application was
unable to save the file to the specified location'. It will save a regular PDF file
or a JPG file with no problem, but trying to save an searchable PDF or .rtf file
results in the above mentioned system error.
This problem occurs either from HP SCAN or from the 8600 scan panel.
The computer is running Windows XP and the I.R.I.S. OCR software is
loaded.

Hello TrailsEnd,
Welcome to the HP Forums!
I understand you're receiving an error message "The HP scan application was unable to save the file to the specified location". I will do my best to assist you!
First, I would recommend downloading this tool called the Print and Scan Doctor. This tool diagnoses and helps resolve common printing, scanning, and connectivity problems, including: (This information is stated here.)
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test : Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check : Checks for missing or corrupt driver files.
Device Manager : Checks for problems in Device Manager that would prevent printing.
Device Online : Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue : Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match : Checks the port settings for the HP product.
Device Conflicts : Checks for conflicts with other drivers, such as other printer brands.
Ink Issues : Checks the cartridges and ink levels for issues that affect print quality.
Print Settings : Checks and adjusts the print quality settings.
Test Print : Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests : Checks the scan mechanism, drivers, and registry entries.
Let me know if this tool fixes a scanning problem on this post. If this doesn't resolve your issue, then I am going to recommend uninstalling the software. Please follow this HP document on Uninstalling the Printer Software.
Once this is complete, you can perform a clean boot on your computer. I will provide a Microsoft document here to help you. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program. Now, you can install the full feature software from the HP website here.
Please post your results, as I will be looking forward to hearing from you. Have a great day!
I worked on behalf of HP.

SPA122 with 1.2.1 won't save certain DTMF settings

Similar Messages

Maybe you are looking for