SPA2002: supports digital DECT phones?

I have my cordless analog phone connected to the Linksys telephone adapter for VOIP and hear a lot of static. One possible solution would be to switch to digital phone for spread-spectrum capability. Does the SPA2002 (and other) adapter support digital phones or is it strictly an analog to digital device?
Any thoughts on the hissing or static? I have moved the IP gateway router away from interference sources.

Similar Messages

I have an Acrobat 9 pro that I want to reinstall on acomputer that was reformated. the serial No. I have does not work. I spoke to your support on the phone and was told to contact you. HELP ! Thanks Beni

I have an Acrobat 9 pro that I want to reinstall on acomputer that was reformated.
the serial No. I have : [removed by moderator] does not work.
I spoke to your support on the phone and was told to contact you.
HELP !
Thanks
Beni

b. sagi
Please do not share your serial number on public forums.
Also confirm you are using correct serial number, Adobe serial numbers contain 24 digits.
Once you have located the correct serial number, refer below links
Error "Invalid serial number" | Acrobat 9 | CS4
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error

Skype Internet DECT phone not working

Hi all,
I tried to get support from Creative but they have been less than useful. ?
?Can anyone answer these two simple questions:
. What is the latest version of the Dect software? I am on v.2.6.0
2. Is there a knowledge base / support section that deals with the DECT phone. I can not locate it. According to the installer I have have access to drivers and the knowledgebase.
My primary issue is I keep getting an? "Access to skype is rejected" message on the Creative application but I have not been able to get any kind of answer as to what this means from tech support. I think I am on to 4 e-mails now. ?
I'm Running XP,? v2.6.0 on the creative software

) Boy, customer support sucks. I've been trying to get my ticket resolved and I still have yet to get any progress. I can't even get these two simple questions answered.
The end of every e-mail says, try the forums, well, no dice here either....

DECT Phones to Cisco 2901 Voice gateway + CUCM 9

One of our locations has 2 POTS lines that currently have DECT cordless phones. Originally VoIP phones were slated to be placed out there but they wantto use cordless phones. We do no want wireless phones as the wireless infrastructure was designed to support it.
I assume that I can connect a Cisco DECT phone to an FXS port on the 2901 and be able to integrate into the VoIP system? Are there any limitations I need to look out for?

That can be done. An analog phone will not have as much features as an IP phone, beside that it will work.

No Optimized web browser support on basic phones after 8/30/13?

Over the weekend I received a very disturbing message on my web browser. of my Samsung Gusto 2. It said that there would be no Optimized web browser support on basic phones after 8/30/13 and that if I wanted a good web browsing experience that I would have to upgrade to a smartphone. I am on the $50 unilmited talk,text,and web prepay plan but don'\t want to get stuck paying for a web browser I can't use after that date.A smartphone monthly plan would cost $10-20 more monthly,in addition to spending considerably more to buy a smartphone. I already have a tablet and was told a smartphone was unnecessary. Anybody else get this message?One person in customer service said that it was propaganda and not to believe it. Another person that I called later found the memo but had no further information on it at this time. Aparently Verizon likes to keep their customer service associates in the dark until last minute.No idea if they will alter their price plans in light of this development. I currently have AT&T U-Verse and will move my number to them and switch providers if forced to.They are willing to offer the same plan I currently have with Verizon but will have to buy a new AT&T GoPhone. Have had pretty good customer service with them up to now,but they are not open 24/7 for wireless customer service. Any comments?

Hi Melissa
Right now I am switching back and forth between the Samsung Gusto 2 and the original Gusto. The reason I am doing this is because the Gusto ,even though it is an older phone, is in much better condition than the newer Gusto2. I want to use the beat-up Gusto2 for work, and switch to the other phone when I need a more presentable phone.Also have a Verizon Wireless CDM 7076(somewhere).
Don't know why I am being forced to replace perfectly good phones. And yes,SydneyK, I could use my tablet for data,but it is a little cumbersome to take it out with me,but don't need it for my work . I just took it out for the first time recently to see how well it works on Wi-Fi hotspots(I don't have or want a data plan).Because I am a U-verse customer,I have access to 30,000 AT&T Wi-Fi hotspots AT NO ADDITIONAL CHARGE. I don't want to pay for something (web access)that I can't use on this phone. If Verizon can't give me cost-effective solutions,then I will be forced to transfer my number to AT&T Wireless as of August 30 for a GoPhone. AT&T wants my business and are wiling to do anything to satisfy me. Haven't had any trouble with Verizon either. Yes, their customer service is still available 24/7 even thought you will have to wait a while sonetimes. I just hate the thought of having to go through the hassle of transferring my number to another carrier.
Marc

Level of local SQLCE/other DB support in windows phone 8.1/using linq to sql from dll?

I have had a mixed opinion for SQLCE support in windows phone 8/8.1. Is their still support for a local SQLCE or other database in windows phone 8.1? (A lot of different blog articles created their own handlers it appears and one used
an visual studio app called SQLmetal) I am hoping to at least figure out the libraries to use for Linq to SQL in windows phone 8.1 in order to access a local Database. I only need to retrieve data from a simple Database with one -
two tables and one of the tables has three fields.
I wish to access the local DB from a dll file even if I have to use Linq to SQL. The reason for this is to store data for a simple game while the app is running. However, I may need to send data to the database and would like to separate that
from the main application if possible. The only other question is: how do I add local database support to a dll file in windows phone 8.1? (This is my main objective but I need to know my database options first)
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr

Windows Phone Silverlight 8.1 apps can still use LINQ to SQL (System.Data.Linq) see:
http://msdn.microsoft.com/en-us/library/windows/apps/hh202860(v=vs.105).aspx
For Windows Phone 8.1 [runtime] app you would need to use an external library like
SQLite
There is a jumpstart training talk on using SQLite in Windows Phone 8.1 apps here:
http://channel9.msdn.com/Series/Building-Apps-for-Windows-Phone-8-1/19
I'm not sure what you mean by: "...access the local DB from a dll file..." Do you mean you want the library used to access the database to be portable across
platforms?
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.
I saw the first link and I think I have already been through some of that tutorial on channel 9 already.
I'm not sure what you mean by: "...access the local DB from a dll file..." Do you mean you want the library used to access the database to be portable across platforms?
This would be a yes. I need use it to submit an application to the store (I wish to have the data and business logic in the dll file while having the GUI separate). I am currently using the portable dll but if you think using another dll type would help
I will try that. I am a VB.NET programmer and so I can see where some programmers get their worries about SQLCE (It seems a lot of VB and VB.NET programmers like it from my time helping on the VB.NET forums second to SQL Server only).
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr
Nevermind, I changed the dll type to "Silverlight" and I can use the System.Data.Linq reference at least.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to
suffering - Yoda. Blog - http://www.computerprofessions.co.nr

Does adobe reader for android/ios support digital signature?

does adobe reader for android/ios support digital signature?

when to support digital signature in adobe reader for android/ios?

Does the Audigy SE support digital input?

) I have an Audigy SE and I was wondering if it supported digital input. I was looking around the recording devices on my computer and I noticed that it said S/PDIF-In on my SB Audigy. I'm planning on connecting my ps3 to to it using optical so I can use my PC speakers without having to constantly switch from PC to ps3 but of course thats only if the audigy se does support digital input.

Yes it does... but you'll need to purchase a separate Digital I/O module for Digital In (visit creative's site for more details).
Note:
If you make use of the Digital I/O module you'll lose your mic/line-in jack

HT3152 I have triple play cable service. Phone service is internet based. i pay monthly charge for cable provider modem. I also want to use modem for my Apple ipad2. Can I replace with another modem that will support internet based phone as well as ipad2?

I have cable triple play service. Phone service ios internet based and depends on cable provider modem. I pay monthly charge for modem. I also want to use modem for ipad2. Is there any modem that can support both internet based phone as well as ipad2?

If I understand you correctly, I have the same configuration. My modem supports Internet and phone service and my television service bypasses the modem. It does not do any routing. It has a single Ethernet port and I plugged in an external router with a WiFi radio - Apple Airport Express. Works like a champ.
Configuration of the Express was difficult. I had to plug it in to AC power and to the modem. Then, I opened up Airport Utility and had to click "yes" for each recommendation. Then I had to really think hard to come up with a WiFi password. Took me a horrendous thirty seconds from start to finish!

Does CRM email router support digitally signed emails?

Hello There,
I have configured email router in a one of our test environment to check, i am able to trace incoming mails which has digital signed mails get tracked in CRM.
Does CRM email router support digitally signed emails?
i am not able to trace mails in to CRM,, have you ever faced this ???? kindly suggest i need this to figure this out.
Thanks,
Vinay Kumar.
Vinay Kumar.

Thanks Vinay, glad you got it working. We were having some issues and its related to the level of rollup and whether certain headers are allowed through exchange or not.
However MS's answer is that it does not work.
Confusing eh.
CHeers
Stuart
Stuart

There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I'm in the UK.

There were no results for I've downloaded the kindle app to my new iPad4 but when I went to Amazon UK and tried to download a book it said "this mobile app does not currently support digital downloads. I don't understand! I was told you could download kindle books from amazon straight to iPad if you download the kindle app first. Do I have to do it onto my computer and then sync it onto iPad? surely not?

Can you go here:
http://www.amazon.co.uk/Kindle-eBooks/b/ref=amb_link_173148087_8?ie=UTF8&nav_sdd =aps&node=341689031&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-1&pf_rd_r=1GDPPW8ZCN9Y 9NQF5VV0&pf_rd_t=101&pf_rd_p=365751407&pf_rd_i=468294
and not log on. See what you can do.

This accessory may not supported by this phone

i don't know what's happened to my phone, yesterday night when my phone was in the charge suddenly stop charging with this error" this accessory may not supported by this phone", i tired more than 10 other cable(the authorized one), it started charging but just until 4% and the same problem happening again " this accessory may ..." and stop charging, then today i took my phone to apple servis center and they said if doing pdate to latest IOS7 maybe it solve, but first they diagnosed my phone to see is there hardwere problem or not and see there is no hardwere problem and my phone and battery worked in fine state, then theyr tried to update that and my iphone5 charged to 17% and suddenly stop charging with same error, she said before this error appear, she got the error 3004, i dont know guys what can i do with this phone any more if someone can help me to solve this problem i'll too appreciated that. plz help me

That message basically just means that Apple wishes you would only buy Apple products for your Apple products . I get that message all the time with my iPod dock. Just click OK and move on. As for the audio player - it may be broken.

Hub Compatible dect phones

Is there a list of Homehub copatible dect phones anywhere ?
Ta.

I don`t think the Hub Phone is any better or worse then any, some will disagree though, My Hub phones work very well.
Its really a matter of personal choice, I woould go for the cheapest option, at kaest as a start.
Hub Phones, and Hubs appear on Ebay from time to time at low prices, might be worth a look.
Ray.

SVG support in Windows Phone store apps

Hi,
I would like to know that is SVG format supports in Windows Phone store apps.
If yes , how to use svg files in xaml?
Thanks
-RomeshDB

only in html / js runtime apps. xaml need to use webview
Microsoft Certified Solutions Developer - Windows Store Apps Using C#

Query re dect phone and wired phone on same line

Quite long winded but wonder if someone could help please.
I had a dect phone plugged into the master socket. Due to working from home and need for better functionality than the dect phones could give me I bought a Converse 2300 wired phone and plugged it into the master socket.
I then moved to dect base unit to an extension socket in another room.
The dect phone when plugged into the master socket always showed caller ID.
The Converse which is now plugged into the master socket also shows caller ID.
However, I'm having a couple of problems with the dect phone I've relocated to the extension socket.
Firstly, I get a dial tone on the dect phone but when I try to dial a number I hear the key tones but it then just goes back to the dial tone rather than actually dialling the number.
Secondly, caller ID is not displayed on an incoming call on the relocated dect phone - instead the screen just says 'External'. Called ID is however displayed on the wired Converse phone.
I suspect there's a setting somewhere on one of the phones but I can't for the life of me work it out. Or do dect and wired phones not work together on the same line?
Any advice would be much appreciated!
Thanks in advance.

Hi, it sounds like there could be a wiring fault with the extension socket, there would not he any settingsbon a phone that would solve the problem. Is there broadband on the line? If so try changing the ADSL filter.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

SPA2002: supports digital DECT phones?

Similar Messages

Maybe you are looking for