SPA2100 lights are blinking in row - How to recover it ?

Hi,
My SPA-2100 lights are blinking in a row. Actually i was trying to upgrade it but i suddenly lost access during upgrade.
Since then the lights are blinking a row and I can not access it via IVR or LAn or WAN
I have downloaded recovery tool from support forums but its failing to find the device on network.
any clue?
thanks
naveed

My suggestion is check for warranty and ask for an RMA.
Regards.

Similar Messages

  • Deskjet 6127 -- All the lights are blinking; can't turn it off. Cartridges are stuck.

    Has anyone had this problem?  I have a Deskjet 6127, all the lights are blinking.  I can't turn it off.  If I unplug it and plug it back in,  (which is what it says to do on the troubleshooting site) the lights continue to blink.  The ink cartridges won't slide out.  Any suggestions on saving this printer from impending doom?

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Ideapad u310 is not powering up - all lights are blinking

    Hi, i got a u310 that is not starting. Not only not booting, but not powering up at all. Plugged or unplugged the result is the same. All lights are blinking when i press the power or novo button(power button, power led, battery led and caps lock light, all white). They all blink together each 5 seconds and i hear a small click, like it's trying to power on or something. I can however press the power button again for a couple of seconds to turn it off.
    The battery led blinks only when it is unplugged. When it is plugged, the battery light stay on(solid, white).
    Anyone can help ? I've looked through the forum and could'nt find anything about this.
    Thanks in advance

    1. Remove any peripherals connected to the laptop.
    2. Remove any power strips and surge protectors.
    3. Remove the battery.
    4. Press and hold the power button for 5 seconds.
    5. Install the battery back and try to power ON.
    6. Connect the charger and try to power ON.

  • I have a hp f380 all in one printer all 3 lights are blinking

    I followed all the instructions on hp.com nothing has worked. I just bought new cartridges for the printer it has aligned 3 times already but won't copy or scan because the ink cartridge light, paper jam and power lights are all blinking at the same time what can i do? I have windows vista all the software for the printer is already installed and I use it for my compaq presario laptop. The usb cord was disconnected for 60 seconds. I also powered it off removed and re-inserted the ink cartridges and even the paper the lights still blink. And checked for paperjams  
    Message Edited by Nesh on 02-11-2009 11:02 PM

    Try working through this support document. it walks through resetting the power module and testing it. It also includes a video which is very helpful.
    The HP Product Won't Turn On or Respond
    If this does not resolve your issue post back so we can get it fixed for you.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Problem with WRT54G. All lights are Blinking

    I do not know very much about technology and my router stopped working correctly. Now, the lights of Power, Internet, and the ones of the numbers 1 and 3 are blinking and the wireless connection does not work. Can anyone explain me what to do to solve this? I will be very grateful. Javier

    hi... power cycle the n/w by unplugging power cable of modem and router, by unplugging power cable of modem and router...wait for couple of minutes, power up the modem first and once modem is rebooted power up the router, check whether lights stopped blinking or not, if lights are still blinking in that case you may need to reset the router back to factory default settings by pressing reset button on the back panel of the router but before you can reset the router let me know which internet connection are you using...so that i can tell you step by step configuration of the router...

  • Cartridge lights are blinking

    hi
    1.Cartridge lights attention lights are countinuasly blinking , and i cant print , printer is not working anyway. please give me a quick solution.
    2.I got deskjet 2544, printer, But instolation CD is 2540, Whats the deferant , please Sortout my problen ASAP.
    Thanx

    Hi,
    1. Blinking: Ink is low or the cartridge does not sit properly,
    2. Series 2540 can be from 2540 to 2549. The whole series use same installation CD for 2540.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Replaced keyboard and now the caps lock light and num lock light are blinking and no screen???

    I just replaced my keyboard on my HP DV6-2155DX Laptop and got it all back together and now there is no display on the screen and the caps lock light that indicated that caps lock is on and the num lock indicator light are both flashing. any help and all??? thanks you

    Ouch, doesn't sound good, but...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • Wrt120n is working wirelessly! But lights are blinking

    So my question is....Are the lights supposed to blink? Or ALL be solid?!...What lights should be ON?....I am wireless! Using a new laptop-Windows 7
    By The way-Online chat tech couldn't even get me connected after a 2hr chat!....I had to do myself! They told me it was broken....
    So how am i connected? Using my connection! Im jus confused....
    Thanx! 4 your Help

    Sorry to revive an old thread, but I have a similar issue with my WRT120N.
    Currently, the home network consists of two routers, one is a Linksys E2000 which is being used as a wireless access point (on the 5 GHz side) for a laptop and one other PC is connected to Port 1 on that via a LAN cable.  The other is the WRT120N on another floor.
    Another LAN cable is running from the E2000 into Port 1 of the WRT120N and another PC next to the WRT120N is plugged into Port 2.  Wireless is also set up on the WRT120N for a smartphone which does not support a connection to a 5GHz network.
    When the only computer powered on, is the PC connected to the WRT120N/Port 2, both the lights for Port 1 and 2, as well as the Wireless light on the WRT120N, will sometimes all blink at the same time, even if the other devices connected to the E2000 upstairs are all turned off.  It would seem that if the E2000-connected devices are all off, then the Port 1 light on the WRT120 should not blink at all, since there isn't any data coming from or going to it.
    For the lights on the WRT120N to be blinking in this manner, is it because I have one router plugged into another?
    Thanks in advance, for any replies.
    This message was sent through a Cisco router.

  • WRH54G ALL LIGHTS ARE BLINKING WHAT SHOULD I DO?

    Hi,
    All the lights of my router are all blinking and the light of the ethernet on my modem is dead everytime i plug in my router but if i directly connect my dsl modem to my computer its working. any help on this thanks.

    Reset the router to defaults. If that doesn't work, try this procedure.

  • HP Officejet 7000 Wide Format Printer Series Error "ALL LIGHTS ARE BLINKING?"

    What are the causes of my printer HP Officejet 7000 Wide Format had this error "all lights blinking"? Which part of my printer have a problem? please help!! thankzzzz......

    Hello ryigo24,
    Welcome to the HP Forums.
    I see that you are having an issue with all the lights blinking on the printer.
    Please click on the following link that deals with Blinking Lights.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • 13" MBP died. Only a black blank screen and blinking lights are visible. Any ideas??

    My friends MBP died the other night.  He put it on sleep mode one night and the following morning, and when he went to turn it on the following morning it would't.  Only a black blank screen and blinking lights.  There is no sound or anything.  BTW it is a mid-2010 MBP, no added hardware, everything stock. It wasn't custom configured, and I believe he upgraded to Lion earlier this year.  I read somewhere that depending how quickly the lights are blinking could indicate a specific problem.  Is this true? He is planning on taking it an Apple store, but figured we would try here first since it is a bit of a drive, and the warranty has expired. Any help would be greatly appreciated.  We are just trying to get an idea of what we are dealing with. Thank you!

    Looks like hardware problem.
    Apple can fix it. Take it to Apple as soon as possible.
    Mac start up seq:
    http://support.apple.com/kb/HT2674

  • HP F2480 - attention light and On are blinking fast. The printer works fine but scanner is dead.

    The On and Attention lights are blinking fast. The printer works fine but cannot connect to the scanner. I'm on Mac OS and when trying to open the scanner I get an: Failed to Open session on the device.

    Hi,
    These units indicate error messages by combination of blinking light. SO most likely has nothing to do withpanel cables and stuff. The pattern you are recieving indicates a scanner failure. Check HERE for a page with the differant blinking patterns and for possible solutions.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • How to recover the old data

    Hi all, i got a new iPhone, i had tried to restore data from the old iPhone to the new one. Unfortunately, before restoring the data i forgot to copy some importance documents and pictures from the new one. so after restoring, those documents are lost, anyone know how to recover those data? thank you very much

    If those documents are not contained in any backup, then you cannot recover them.

  • ATV 2 stopped working. The connections are good, the remote is paired and working, but the menus come and go off sporadically, and the white light just blinks continuously.

    I bought ATV 2 about two weeks ago.  The setup was easy and I set up my Home Sharing, screensavers, and I was watching Netflix within about 20 minutes.  I had a good week of no trouble and enjoyed the device immensely.  I updated the software when prompted and continued to watch movies and play music.  Then something happened: in the middle of viewing, ATV 2 stopped working, the screen went blank, and the little white light started blinking slowly.  When this happens, the ATV manual "troubleshooting" section merely says, "Apple TV is having problems."  ***?  Strangely, it would come on and act fine for a few moments as if nothing happended (for only a minute or two), then click off again.
    I attempted to RESET the device by using the Down/Menu combo -- nothing -- the white light blinks really fast but still no picture on the TV (just the Apple logo); I unplugged it and plugged it back in -- no fix; then, I RESTORED the device and had to re-enter Apple and Netflix account info, passwords, set up shared photo folders, etc.  Afterwards, it worked.  I watched movies right where I left off and went on with life until a few days ago when I wanted to finish a movie... The movie was going fine - no problems at all - until ATV 2 stopped working again! 
    So, the remote works [it is paired and sends commands as it should], the HDMI connection to HDTV is fine, the stereo receiver connection is fine (for audio, using an optical cable).  But the only thing on the TV is the Apple logo.  Resetting ATV 2 doesn't work; and I could restore it again but that seems like a HUGE waste of time, and something I am not prepared to do each time I want to use the device. 
    What could be the cause?  Wireless interferrence, software/update flaws, need for firmware, or malfunctioning hardware?   ATV 2 is a $100 paperweight until I get answers.

    After some sleuthing online, reading a compilation of Q&As here, and visiting the local Apple Store, I think the problem and "solution" may be found in HOW my ATV2 is connected to my stereo.  For some reason that I have not figured out, when the RECEIVER either switches from one setting to another, it somehow disrupts the ATV.
    The ORDER of how you turn ATV on and off is key.  If you start with everything OFF (ATV, HDTV, stereo Receiver), then turn on the receiver, then turn the HDTV, put the TV to the input setting that is connected to the ATV, THEN turn on the ATV by hitting the Play button on the remote. 
    Note: The ATV light may come on once the HDTV is turned on and put to the correct setting, but you will not see a picture on your TV yet.
    You should be up and running on ATV (without having to reset, unplug or restore). Apparently, I was using my universal remote that essentially turned everything (HDTV, Onkyo Receiver and, by extension, the ATV) on at the same time, confusing ATV and causing that evil blinking white light.  The ATV connection was lost.
    When you are done with ATV, you must put ATV to sleep FIRST... each time. The command is on the main menu, to the far right, at the bottom [Sleep Now].  Once you press Sleep Now, the ATV will go off.  THEN you can turn your receiver/HDTV off (or to whatever other setting you want for watching regular tv, music, etc.).  I was simply switching my HDTV and Receiver 'away' from ATV when I was done... But I would return to a blinking light and no ATV.  The solution above is a work-around that seems to do the trick.
    The thing Apple needs to fix is to make the "Sleep Now" command a simple process on the remote so you don't have to back out of everything you were watching to get to the main menu for the Sleep Now command. Or in the next update Apple merely needs to improve ATV2 so it can work no matter what order you open or close it on a HDTV/Stereo. 
    Note: Other people have suggested that you just hit the select or Menu button to put ATV to sleep, but that did NOT work for me.
    I figured this out through trial and error so I hope it works for you too.

  • My Apple tv status light is blinking fast - how do I troubleshoot?

    my Apple TV gen 2 status light is blinking fast and I am not able to see anything from my Apple TV - how do I troubleshoot?  What I read on the Apple site is that my Apple TV has issues.  My Apple TV is hard wired to my Ethernet network.  It is connected to my TV using an HDMI cable.  It worked in the past but when I turned it on today it did not work.  I have not used it in several months and we had a bad thunderstorm here a couple weeks ago.

    I'm having the same problems as you. Any solutions? This is what i'm facing
    1. No video signal at all
    2. Plugged in power cable only, there is no light
    3. Plugged in micro usb, there is flashing light
    4. Restore via iTunes is sucessful but problem still persists

Maybe you are looking for