SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

Similar Messages

  • My iphone 6 connects to the car via bluetooth, the music works good, but the phone calles does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai and a Dodge rent car and get the same results.  I updated the last 8.0.2.

    My iphone 6 connects to the car via bluetooth, the music works good, but the phone calls does not work.  It looks like it is working but doesn't.  I have tried in my Hyundai Sonata and a Dodge Dart rent car and get the same results.  I updated the last 8.0.2.  It worked the first day i had the phone, and then i updated to Ios 8.0.2 and it quit working.
    Now when i get in the car, it acts like it is connected and makes the same call it was on after syncing to bluetooth, but it really isn't on a call.  This is happening on both cars.
    Does anyone know if this is the phone and i need to take it to Apple or if there is an issue that Apple is working on getting a fix for?
    My son in law has the exact same phone as me, we both got the on 10/6, he had a Dodge Dart and his is working via bluetooth.
    Someone HELP please, as i consider this a safety issue by not having my calls go to bluetooth.

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • Last night I bought Adobe XI Pro and this morning the serial number does not work.

    Last night I bought Adobe XI Pro and this morning the serial number does not work.  [removed by moderator]

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

    since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

    Hi Erdelestre,
    Thanks for visiting Apple Support Communities!
    See this article for some tips about troubleshooting AirPlay:
    Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Troubleshooting performance issues with AirPlay or AirPlay Mirroring
    If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    Best,
    Jeremy

  • Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera.

    Yesterday I was able to take photos but around 9pm last night my rear camera stop working. I have reseted my phone and have also restored it and the camera still is not working. Also I have deleted all apps that can have access to the camera and i have updated the new IOS.What else should I do ? Is this a hardware problem?

    Looks like a hardware issue that will have to be taken to a store

  • My phone was not worked for last two days  it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

    my phone was  not worked for last two days  it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

    We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened.  You need to provide some detail.

  • After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    After the last iPhone 5 update, the calendar date do not match the respective weekday. i.e. November 1st 2013 is marked as Saturday on the iphone.

    I have this exact same issue!
    I was on 2.0.1 running fine until late last week, noticed emails would not show up unless I had opened them in outlook. I thought I ran into a bug so I upgraded to 2.0.2. Now I can sync my email if outlook had them opened previously, but no calendar or contacts at all. I don't think my exchange admins will move me to another server, any other ideas?
    I love my iphone but if these features don't work I can't use it. I would appreciate any ideas.

  • Last update to ios6 - worst ever, facetime does not work as it used to, problems with skype

    last update to ios6 - worst ever, facetime does not work as it used to, problems with skype, losing connection or no9t connecting facetime to face time. Do something with it.

    I'm not sure yet, but It may be as simple as "settings", "FaceTime" "Off"

  • I updated my Ipad 2 last night, and now my Kobo application is not working. Any ideas?

    So, last night, updated my Ipad 2, it took ages, but went smoothly. Two things I noticed right away--my Kobo application is not working (opens, but bookmarked screen is blank), and when I went to the App store to see if I had missed a Kobo update perhaps, the APP update screen was frozen and wouldn't allow me to select ANY updates.  Anyone have some advice?

    Try giving it a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and see if that helps.

  • Whatsapp is not work for last seen timestamp

    why dont work my whatsapp for last seen timestamp i try turn on but still not work because could not connect service please later again

    Why not ask App developer or look at their support site, since you are using their app.
    Not apple or iphone issue.

  • I just upgraded to OS 10.8.4 last night and my Office 2011 programs will not work.

    I just upgraded my MacBook Pro (early 2011) to OS 10.8.4 last night and my Office for Mac 2011 programs will not work. To test in safe mode, I shut down my computer, restarted in safe mode to see if I could open any of my word or excel documents, which I was able to do.  I restarted, and tried opening an office document (word and excel), which did not work.  Does anyone have a solution to this?  I cannot revert back to OS 10.8.3 because I did not use Time Machine.  Any help will be appreciated.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I participated in my company's video conference last week, and now the camera on my Macbook Air will not work for facetime or skype.  Help!!

    I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working?  Help, I cannot find the button to free up my camera!! 

    If you installed some kind of software to take part in the conference, remove it.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Why with last update of mevericks usb ports and xcode not works ?

    yesterday i install the last update of maverick and now i cant use the time machine, usb key and xcode
    do you have a solution for that ?

    Just waking this thread up again in case anyone has had any other ideas.
    Since last posting, usb became functional again, (came back on a couple of hours after a restart) and as long as I kept the machine alive, usb would stay alive. Bluetooth came back on briefly, but for most of the time was unavailable. System profiler shows no problems and Console does not report any usb related errors as far as I can see.
    After a recent restart, usb disappeared again, and despite numerous restarts and being left on for a couple of days (and subsequently left off for several days) it has not come back. When usb is not working, examining the system profiler (through screen sharing from my macbook) usb shows no errors, but also shows no connected devices. I can charge my ipod nano with any of the usb ports (front or back), so power does not seem to be the issue.
    I can't reset pRAM (because the keyboard is not available at boot), but have reset SMC numerous times. Have tried other keyboards, and mice. No joy.
    I seem to have run out of ideas. Any suggestions?

  • "Stop on last screen" not working for videos in development app

    I am testing an app I created in InDesign on my iPad. Although "stop on last page" is selected for the movies and it functions properly in the Adobe Viewer, in the development app the movies go back to the poster when they are finished. This causes major problems for the functionality of my app. What can be done to fix this?

    You should ask in InDesign or maybe Touch Apps
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • When I tried to update my iPhone 5s to iOS 8.1, I was forced to choose to restore or back up.  Back up wasn't working so I had no choice but to restore.  I lost pictures over the last two years.  Cloud and iTunes backup are not working for me.  Help!

    How can I retrieve photos when it says my cloud and iTunes backups are empty or not backed up?
    When I tried to update my iPhone 5s to iOS 8.1, I was forced to choose to restore or back up.  Back up wasn't working so I had no choice but to restore.  I lost pictures over the last two years.  When I tried my cloud, there was nothing.  I would get notifications that my cloud was full, but I thought there would at least be some photos in there.  When I tried to restore a back up, it said the last time was two years ago.  I thought when you're on wifi, it automatically backs up.  I've charged my iPhone into my Macbook a bunch of times, so something should have backed up.  Is there any hope for my photos?

    Sorry no backup - no pictures.
    Yes phone will automatically backup to icloud when on wifi and phone is charge, but your phone storage was full so it stop backing up.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    iCloud: iCloud storage and backup overview
    When your phone was connected to your computer, you should've seen an autoplay which would've allowed you to import your pics to your computer as you would a digital camera Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Maybe you are looking for