Spa3102 low voice

good day, I'm having problem with our voice with our SPA 3102. When we call using PSTN line, the other party will always complain that our voice is too low, they can hardly hear our voice. But calling through our SIP numbers, we have no problem dealing with this kind of call. Another thing is that our SPA 3102 ring but there is no callee. I mean when our SPA3102 rings and we pick it up ,we can only hear busy tone. Hope you can help me with my problem.

Try adjusting the PSTN to SPA gain and SPA to PSTN gain hopefully this should help you with your low voice problem on PSTN. For the ghost ring , try  setting MWI Ring Splash Length to zero.

Similar Messages

  • Low voice

    Sir,
    when i talk to other , my nokia c6 listen me very low voice.
    Please tell me how to get loud voice without loud speaker.

    Have you checked the volume settings and try adjusting the volume when on an active call?Try adjusting using the volume toggle when in call.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • DVSeries Audio issue - Very Very low voice.

    I got my DV6 laptop 2 days back.
    I am not able to hear voice from any good orginal DVD to the full.
    Problem: Voice from speaker is very very low.
    I updated my drivers. I reinstalled everything with factory settings. I am trying hard but hardly able to hear anything out of it.

    ok, this is actually driving me MAD now!
    @Rudegar, thanx for the reply but i don t see how this relates to my question 

  • MBP low voice output

    Hello,
    I've got a macbook pro for almost a year with lion.
    Suddenly a few days ago the voice output (via the bluetooth device) became very low.
    From the iPhone the voice is great so it's not the bluetooth device.
    What can I do?
    Thanks a lot.

    It's funny... I'm still trying to figure that out. There is one program that says "Quick Message" when you get one. At the same volume level as previous laptop, it is quieter. But with volume full up I believe things are a loud as they were before.
    I just played a stored mp3 that I am have played before. I think the mid-volume is softer than it was. From there down I don't hear the song at all. But from mid to above I believe I can get the song as loud as before.
    I did notice something but it wasn't conclusive. As more people chime in maybe there will be a consensus.

  • C7 low voice level when recieving calls

    always since updating the SW version 014.002 have low level of voice at the C7 speaker when recieving calls, plz advice

    Hello! I have the exact same problem, low volume on voice calls... I have also upgraded my phone to version 14.2, but I had not realized that the low volume started happening after the upgrade. Now, you said we should try to reinstall this same firmware, version 14.2, but how do we do that? Do we have to use some special software for that, or is it possible directly on the phone? Thank you in advance!

  • Low voice level through earphone E51

    The voice level on my 51 is very low through earphone even if I set it to the highest level when I make a call. I cant hear the voice of the person I am talking with very well.my phone software is v 200.34.36 Rm 244
    my blog on the net(in arabic):http://bazkurd.wordpress.com

    I mean the built in earphone not the accessory
    my blog on the net(in arabic):http://bazkurd.wordpress.com

  • Hearing Low Voices in a Loud Room

    I am new to the discussions, and searched for a while in hopes to avoid being a (double) poster, but no such luck.
    I have been given the job to clean up audio for someone. The tape has people sitting in the middle of a loud room talking with lots of random background noise.
    The idea is to clean it up to where we can make out what is heard, amongst the random room noises. I have used low pass and high pass filters. I applied a Channel EQ filter as well. I also took several noise prints and tried to reduce the background noise, but there's so man variance in the noise that the reduction doesn't work took well.
    I can hear them in some parts, but not much. Any thoughts? It doesn't have to sound good, exactly, just we just need to understand them.

    You've tried everything that likely can be tried. Bottom line is, the frequency you want to diminish is too much the same as the frequency you need. Unfortunately, at some point, it's the best you can do.
    jimi

  • My retina macbook pro's audio has a very low voice.

    I just have my retina macbook pro yesterday. I played a movie with Mplayer and some video on Youtube, but the output audio was very low. I compared with my macbook air(2011), with the same video and movie, use the same audio level, it is obviously the retina's sound is smaller than air. Is my audio system in retina have some problem? or it is normal?

    So not sure how the 2014 MBP's trackpad works but on the ones I've seen the trackpad has to be exactly centered in the trackpad opening. When you service them you place shims around the outer edged before you tighten them in place. Meaning the springs that hold it in place.
    If it wasn't centered correctly I could see how it would creak.
    https://www.ifixit.com/Device/MacBook_Pro
    This is for the 13" late 2013. It's glued in place here so I could see how it would creak if it wasn't properly installer.
    https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Late+2013+Upper+ Case+Replacement/27438
    Step 34.
    Make them fix it!

  • IPod touch4g low voice in earphones? solutions

    hey i bought this new ipod touch 4g from the apple store.
    what i have noticed is that the sound in the ear phones we got from apple is quite low even my simple sony mp3 is much louder.
    are there any ways to make it louder?

    Hi.
    Firstly, try going into ipod and turning up that volume, without using the hardware buttons.
    If that just also increases the sound of the CoPilot directions, try changing the settings of the CoPilot app.
    You could try contacting the developer of the app via the following links:
    [CoPilot Live HD Website|http://www.alk.eu.com/copilot/ipad>
    [CoPilot Support|http://www.alk.eu.com/support/copilot-support>
    Hope this helps. Remember to mark this as helpful or solved if that is the case.

  • Nokia 5233 - Low Voice clarity issue

    i got a new Nokia 5233 mobile, whenever i spoke over the phone the recevier at the other end cant able to hear my voice properly also i cant hear them properly, voice breaks often. please help me. is there any voice clarity settings in this phone /.///////////////////// ??????????

    which SIM service u use check if there's a network problem n also check whether the tiny holes from where voice comes and goes are not covered by ur fingers or any other thing by any means

  • Low voice volumen

    Hi
    I have own a MacBook Air for almost two years now. I currently user OSX 10.9.3 and have noticed over the last months that when using skype, hangout, etc my voice is not heard by the other person, but ambient noise is heard loud and clear. I checked my sound preferences and ambiente noise reduction is activated. Even more, if I speak and check the sound bar, it is not recording my voice but get high when I type on the keyboard. On a few words, with ambiente noise reduction I get a lot of ambient noise and almost no voice.
    Does anyone have an idea of what I can do?
    Thanks!

    Have you checked the volume settings and try adjusting the volume when on an active call?Try adjusting using the volume toggle when in call.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Back to back spa3102 no voice

    I have 2 SPA3102na devices setup over a wan without NAT. Calls ring through to the remote device but when it's answered there is no sound, just dea space and the caller hears it continue to ring.
    They are connected over a private network and local routers with no firewall in the way. When a call comes in it rings through and when answered niether the caller or reciever can hear anything.
    I used this guide to configure them http://www.provu.co.uk/pdf/sipura/spa_backtoback_2x_spa3000.pdf
    Which seems to be the most commonly used.
    Any help would be appreciated.

    One thing, you can never underestimate the importance of double checking settings. I found I had a bad default gateway on one of the units. FIxed that and life is good.
    Sometime you have to wal away from it for a bit.

  • Voice Recording is not GOOD in PLAYBACK NOKIA6300

    Dear Sir/Madam,
    To Whom It May Concern
    With all due respect,
    i would like to inform you that 5 days ago my father bought a brand new Nokia 6300 (with Advance Telecom's Warranty). Interestingly the mobile
    set has some manufacturing fault by Nokia that its Voice Recording featuer doesn't provide you the gud quality (while you listen it back from
    the Recordings folder).Even i checked Nokia 6300 phone's voice recodings by transferring them to my Nokia 6230i and they were as loudly as i
    increased the volume but when i transferred my nokia 6230i's recorded voice recordings into nokia 6300 the result was again the same VERY LOW
    VOICE that YOU NEED TO KEEP THE PHONE'S SPEAKER CLOSE TO YOUR EAR TO LISTEN VOICE RECORDINGS.
    The retialer on our special request
    checked out our reported problem of very low sound while listening back the Vocie Reocrdings from Nokia 6300 on an other brand new Nokia 6300
    Set, "stating that it is nokia's manufacturing style that you can't listen the voice recodings loudly from you nokia 6300 mobile set".
    It is unbelievable for me being a Nokia lover n user for over 8 years that none of the earlier nokia mobile phones had this is sort of problem
    of low voice recordings' playback.
    My Question and Request from you only is That "Do u have the Nokia Dristributors or We the Nokia User/Consumers have the rights to companin
    back to nokia regarding this sort of problems"?.
    Looking forward to hearing from you as soon as possible to you.
    EDIT: removed personal informationMessage Edited by mohjo on 20-Apr-2007 07:59 PM

    As Moderator, my job is to make sure the user of this discussions board stick to the guidelines. The Moderators are not Nokia customer support staff. As you know this is user to user support forum. You will not receive product support directly form Nokia on these Boards. However from time to time Nokia may choose to leave statements concerning hot topics. When this happens we will post them.
    If you do have an issue you wish to ask Nokia, then we suggest that you use the contact us link above. You will be able to contact a Nokia representative,and advised them of your issue. They will either advise of a resolution or if there is no resolution then they should be able to record your comments as feed back and have them passed on to the appropriate departments.
    Regards
    Mohjo

  • IPhone 6 Plus IOS v8.1 Slow Motion BROKEN

    Film in either of the two slow motion speeds and plays back ok on phone.  I put the files in the computer (grab the raw file via explorer), on Win 7 Professional, and played with both windows media player AND Quicktime player (up to date players) and the videos play either no slow motion, plays alternating between fast and slow, one time it played slow but had normal voice pitch, other times played slow with low voice pitch.  On youtube, they don't play in slow motion.  One I shot vertically (which I did just as a test) and it was sideways in the computer, however, youtube rotated it so it's vertical but it is not in HD and it does not play back in slow motion.  This same file that was sideways in my computer stopped playing after about 2 seconds in the computer, but played through ok in the phone.  I noticed that as the video plays in the phone, there are blue vertical lines below the left/right scrub/scroll bar for the video.  This can be set to play only a portion in slow motion.  But WHY does it start each video with the ends nudged in so the first 3 sec is regular speed and the last 2 are also reg speed also w/the slo-mo in between?  It defaults to this each time an you have to spread it out to get all slow motion..
    In Win XP, some of the video files don't show up.  It shows .aae files with corresponding numbers to the videos, but most of the videos are not there.
    I think this is a huge software bug that needs to be tested.  I updated the os on my new phone before I put anything into my phone.  Everything else has been perfect till this.  HELP!

    You said, "...plays back ok on phone."  That's where Apple's software stops.  Your problems with Win 7, Win XP, Quicktime, and YouTube need to be addressed on forums for those programs and/or sites.  Presumably the issue has already been resolved by users on those sites, with different solutions for each.

Maybe you are looking for

  • Not able to set the context

    Hi All, I am not able set the context to an xml file in JFPREAMBLE CONTEXT file. Can any suggest me how to fix it?

  • LINKAGE_ERROR

    Hello , We are getting a LINKAGE_ERROR at the message mapping step on (runtime) and while testing the message mapping we are getting the CLASS_NOT_FOUND error. This happens for all scenarios and not the case with any particular scenario. After readin

  • Intrastat - Add fields in report output - VE01

    Hi Friends, I do not see import output  fields like mode of transport, COO, material No, etc in VE01 intrasta report output. Is there any configuration to add required output fileds. In the select laout also we do not have these fields except there i

  • Raw images not readable by lightroom or CS3 from 5d mkii

    Just got my new 5d mkii and went out to shoot my first images with it.  Capturing RAW only I shot 88 frames at Crater Lake.  When I got home I went through my normal procedures for downloading my images with Lightroom and it did not recognize the fil

  • Deploy InfoPath Forms across Ms SharePoint environments

    Hi, I have created workflows in MS SharePoint 2010 and added MS InfoPath forms in it. However, when migrating the workflow from DEV to TEST environment, the InfoPath is not included. I would like to export the MS InfoPath form DEV and import it into