SPA400 turned off on a firmware upgrade

Accidentally a SPA400 was disconected while upgrading the firmware and now, all ports leds just keep turned on when connected. It dose not response to the last ip that was asigned, I even reset the device but it dose not get an ip from the DHCP server. Is any way to restore the firmware ?.
Than you.

I believe it will be better to call the manufacturer and ask if there is a recovery tool for the spa400.

Similar Messages

Cannot turn off passcode after ios8 upgrade - iPad mini

Upgraded iPad mini to ios8 and cannot turn off the passcode. In settings, I can turn it off but it tells me that I need to set a passcode within 60 minutes. It then counts down and requires me to set a passcode once 60 minutes are up. Also does not let me change duration of passcode (from immediately to 4 hours for example). Any thoughts on how to turn it off? Thanks.

is this your iPad or one administered by someone else...for example if I use an iPad from work our IT policy dictates that I must use a passcode and I am not allowed to turn it off.
If it's yours, just a shot in the dark, do you have restrictions enabled? If so, go in and disable them then see if that will allow you to turn off the passcode lock.

How do I turn off antivirus software to upgrade to Adobe Acrobat Professional from the Standard?

I need to turn off antivirus software on my computer at work. It has Kaspersky, McAfee, and Norton, believe it or not. I have not installed or used these antivirus programs, but I am required to know how to disable them temporarily to do this upgrade. Please help!

Why do you need to disable the antivirus program to upgrade Adobe Acrobat?
Are you facing some issues while upgrading?
I was able to find following links that might help you:
Norton Anti Virus : http://www.ehow.com/how_5986174_temporarily-disable-norton-antivirus.html
Kaspersky : http://support.kaspersky.com/6596
McAfee : http://download.mcafee.com/products/webhelp/4/4105/GUID-6E2C3F81-4334-490A-A0C0-EABE466A54 00.html
I tried to look for them on web, I will recoemmend you to contact the Antivirus manufacturer, if you are still facing the problem.

T61 - turns off after a Memory Upgrade when I start an 3D application

I have replaced in my T61p Notebook the original Memory 1x2GB PC2-5300 with 2 Kingston KTL-TP667/2GB modules. Now, the Bios see 4 GB and Windows see 3GB. That is OK.
My Problem: When I start an 3D application like Futuremark, the Notebook switch after a few seconds off. No error, no Warning, the screen goes blank and the Notebook turns off. The Problem obtains also when I mix my configuration with the original Module and one of the new ones from Kingston.
Only the configuration with one 2GB Memory (Original or Kingston) will work.
Has someone an resolution for my Problem?

this is a known problem in the T61p which have problems using 2 x 2 gigs of ram when you are using graphics intensive programs. I don't know if there is a fix out yet for this problem.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How do I turn off the sidebar to upgrade every time Reader opens?

I just downloaded Adobe Acrobat Reader DC. Every a new reader window launches I get the sidebar to Export PDF, Create PDF, Edit PDF, .... I get the point that you want me to upgrade, but can I turn this off so I don't have to change it EVERY time?? Thanks

Hi mikec19294518,
I am so sorry for the trouble that you are experiencing, and I am sorry to inform you that this option won't be available.
You can save the Last View settings (Option is available under Edit -> Preferences -> Documents) when reopening the document on the navigation pane that is to the left however it doesn't apply to the Tools pane on the right.
So if you close the Navigation page on a document with the ' Restore Last View Settings when reopening documents ' option checked it will save that settings, however if you try the same with the Tool pane on the right, it won't work.
In case if you have any other queries please let us know, we will be happy to help you.
Regards,
Aadesh

Can't turn off Rotation Lock after upgrade to iOS 8

After upgrading iPad to iOS 8, the device is locked in portrait mode. I assume this is what "Rotation Lock" means. In Settings, Rotation Lock is checked and cannot be changed. I don't have this problem with my iPod Touch. What is the fix?
Thanks in advance.
BSandburg

La Profe S wrote:
WIth IOS8, I believe it was because I had turned the physical knob to MUTE on the iPad. For some reason, the two are connected. Turn mute off and it should work.
They are not connected.
Mute and rotation lock are independent. However, as I said above, they can be controlled by the same side switch, but it depends on what said switch is set to in Settings->General->Use Side Switch For.
I wrote:
You can change the behavior in Settings->General->Use side switch for
Whatever is not checked there will appear in control center.
The checked option will be controlled by the side Switch above the volume control buttons.
Of course this only applies to iPads up to the iPad Air. Since the iPad Air 2 did away with the side switch, everything is controlled via the control center on the iPad 2.
Turn on Mute and Orientation Lock on iPad Air 2 - Apple Support

Can not turn off apple tv after upgrade

Processed the last updgrade for my apple tv 2nd gen. Now holding down center button will not turn it off? anybody else having these issues?

**** never knew it just went to sleep, always thought it went off, geeze just found this out, lol. I updated from 5.0.1 or something like that to 5.3 so I guess lots has changed. I used to have to turn on wifi from the menu bar for anything to show up(other than the icons) and press the play button for a few seconds and it went to sleep(what I thought was off). now, it's always on, I can see the music, the movies(except the ones in my library). when I open itunes, I can see my movies in the library, all without turning on wifi in the menu bar. could this be because the wifi is always on and the update enables me to not have to turn wifi on in the menu bar, like I had to before? or is this a non issue because that's the way it works now? whew.
thanks all

Can't hear keyboard clicks or power turning off after ios 7 upgrade to iPad 2

Prior to upgrading iPad 2 with IOS 7, I could hear keyboard clicks when sending email as well as click associated powering off iPad when closing cover on it. These sounds are no longer heard with IOS 7 installed. Sound settings for keyboard clicks and lock sounds are on. How do I fix this problem?

If you lost sounds for keyboard clicks, games, apps, email notifications and other notifications, system sounds may have been muted. If resetting doesn't help, take a look at this.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

When trying to access itunes store after itunes upgrade, windows dep turns off program. have updated quicktime player

After newest upgrade to itunes when trying to access itunes store, windows dep turns off program. Have upgraded Quicktime player. Can not turn off dep for itunes.

miniart18 found a solution and posted it on another post. her solution is to right click on itunes shortcut & pick "run as administrator". thanks again miniart18!!

My Mac Mini goes to sleep when I turn off my TV.

Hello and thanks in advance for all help. I have a Intel mac mini that I currently have hooked up via DVI/DVI cable to my Sony LCD television. I recently upgraded the OS to 10.5 from 10.4. The issue that I am having after the OS upgrade has to do with the Mac going to sleep after I turn the TV off. It also goes to sleep if I set up the display to sleep after a period of time even if I have the computer itself set to never sleep. Right now I have the computer set to never sleep and the display to never sleep but when we turn the TV off the computer goes to sleep anyway. The reason why I need the computer to stay awake is because we use a Magicjack at our home for our local phone service and it is plugged into one of the USB ports on the computer. If the computer goes to sleep we loose our home phone service. I am wondering what could be causing the computer to sleep when the display is turned off. When I upgraded to 10.5 I did a clean install and not a upgrade.
Any help would be greatly appreciated.
Thanks very much to all.

Thanks so much for your help. This fixed things perfect. The only thing I may add for anyone else that has this issue is that it is important to reconnect the power cable to the computer first and then after a few seconds reconnect all of your other cables. The first time I tried it I reconnected the power cable last and it still didn't fix things. I gave it another try reconnecting the power cable first and now everything is perfect.
Thanks again for your help,
Rich

After the firmware upgrade last week, the local WIFI networks pop up when I turn on my phone, I have WIFI turned off, how do I turn off the pop up?

After the firmware upgrade last week, the local WIFI networks pop up when I turn on my phone, I have WIFI turned off, how do I turn off the pop up?

What OS X version are you using?
Can you take a screenshot of the pop-up notification?
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse button. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
If you want to attach a screenshot to a response here, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the window the cursor is on.
⌘ Shift 3 captures the entire screen.

While doing the most recent firmware upgrade, my iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.

If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
Here is an article from the apple support website on setting the ipod to disk mode.
http://docs.info.apple.com/article.html?artnum=93651
If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
http://depot.info.apple.com/ipod

[HELP!!]After Firmware upgrading, **bleep**! So how can I turn off the WRT54G Firewall? Thanks!!

One program was using fine when using previous firmware and now facing firewall problem after upgrading.
Can anybody help me to turn off the firewall?
THanks a lot!

Hi… Well I think both the firmware’s does have a firewall and disabling this altogether may not be the best solution for the problems you are facing. Please give the exact details of the issue. Also just to mention, after upgrading the firmware, reset the router and reconfigure it. If you need to open the ports on that firewall, you can go to gaming and application tab either forward or trigger the ports as per you requirements.

Cisco EPC3925 EuroDocsis Wifi turned off but light stays ON w/ recently updated firmware

hi there
i have a Cisco EPC3925 EuroDocsis 3.0 2-PORT Voice Gateway and i just noticed that today they pushed an OTA firmware upgrade via ISP "Melita" here in Malta.
It looks like now when i disable the wifi, the green led for wifi still stays on, did anybody notice this? I have this firmware now:
Model:
Cisco EPC3925
Vendor:
Cisco
Hardware Revision:
1.0
Serial Number:
MAC Address:
Bootloader Revision:
2.3.0_R1
Current Software Revision:
epc3925-ESIP-16-v302r125573-131025c-l2gre
Firmware Name:
epc3925-ESIP-16-v302r125573-131025c-l2gre.bin
Firmware Build Time:
Oct 25 11:30:50 2013
Cable Modem Status:
Operational
Wireless Network:
Disable
if anyone has a link to a newer or older firmware, i'd like to change this one, we don't normally use wifi and prefer the cable. I checked with inSSIDer 3 and when the wifi is disabled it cannot be found but i am really thinking if that's for real since the light is still on....
any help appreciated..
thanks
Gabrio

hello everyone,
The technical supoort of my ISP got back to me with the following:
The fact that the Wi-Fi light on your Melita cisco modem is still switched on is because we have recently launched the new Melita Wi-Fi, where all Melita’s cisco modems are being used to broadcast this signal so that customers with Melita mobile can connect to Wi-Fi wherever they are. The cisco modem is being used only as a repeater to boost this signal and it will not affect at any time the connection that Melita is providing you.
Having said that this option may be switched off by turning the modem to bridge mode, by doing this you will eliminate completely the Wi-Fi option from your modem. If you wish to turn your modem to bridge mode kindly follow the link below to guide you through the process.
http://help.melita.com/index.php/bridge-modestatic-ip/
so anyone else that wants to do the same, feel free using that guide.
One piece of advice.... if you don't plan in using another wifi router to plug to the CISCO, should you want to have the wifi again, then you need to log to http://192.168.100.1 and then switch back to "router" mode from "bridge" mode. DHCP will not work in bridge mode so if you just turn on wifi, you will have to manually configure it. Or switch back to "router" for the time being.
When you enable bridge mode, you cannot log to http://192.168.0.1 maybe obvious but good to know.
I have to say that this ISP pushed this OTA update without saying anything to its customers for boosting their signal to their mobile customers, very nasty indeed. I don't like to have the wifi on at home when nobody uses it, it's bad for the health, it made both me and my wife having headaches in the past, so if i need it, i turn it on, otherwise it's OFF and i want to have the freedom of doing that at my will.
There's already too many microwaves and wifis out there, at least at home i want to control it!.

Can't Turn Off Zen Micro with V2 Firmware

I just decided to upgrade my firmware to V2 for the hell of it. The new firmware seems odd at best, but I just don't feel like going back to V. One thing that really annoys me is that I can't charge the Zen to full anymore. It always seems to be stuck at 2 bars max. And those 2 bars seem to run out in less time too. I think its because the player is actually running in Docked mode for as long as the thing is charging. I'd like to know how to charge it using USB without having to have it go to Dock mode, as in not have Windows constantly keep an open connection to it.

rbinc wrote:
?I'd like to know how to charge it using USB without having to have it go to Dock mode, as in not have Windows constantly keep an open connection to it.
Turn off all of the WMP and Creative explorer services. I don't have these set to autorun, or auto start.
So when I hook up a player, as?long as I dont have any of it's services running or folders open, it will just charge and not be docked.

SPA400 turned off on a firmware upgrade

Similar Messages

Maybe you are looking for