SPA525G2 - blinking line button for incoming calls

Hi,
I'm using a UC560 and SPA525G2 (some with 500S expansions) phones at a customer's site. At the moment all extensions at the receptionists' phones are configured as monitor lines, however there are only two states that indicate if the target extension is busy (button LED flashing red) or idle (button LED not flashing).
How can I configure the buttons/LEDs to blink when an extensions is called, so that the receptionsts can pickup the call via PickUp function?
I'm not even sure if this feature is available for 52G2, unfortunately the reference guide isn't very helpful either.
Kind Regards,
Rainhard

Unfortunatly there is no way to do that. However you can set the lines to be shared and appear on receptionist phone. Alternatively I have developed a small console that display all phones status, that includes ringing status. More details are in the website mentioned in my profile.

Similar Messages

  • When will apple bring back the onscreen cancel button for incoming calls?

    when will apple bring back the onscreen cancel button for incoming calls?

    No one here would know, as there is no one from Apple here. Suggest such to Apple using this:
    http://www.apple.com/feedback/iphone.html

  • What happened to the "DECLINE" button for incoming calls?  All I get is Remind Me, Message and Slide to Answer.  Where is the RED DECLINE button?

    iOS7...incoming calls missing RED Decline button?  Where did it go?  All I get is Remind Me, Message....and Slide to Answer on the bottom.

    @gkovach - Have you tried resetting your phone, Hold both Home and Power buttons down until the Apple logo appears and wait for phone to reset itself.
    If this doesn't help you can try resetting all settings, Settings => General => Reset => Reset All Settings.  You won't lose any apps, data, music, photos, etc.  But you will have to go back in and reset all the setting that you changed from the factory defaults.

  • No Decline button for incoming calls

    When I receive incoming calls there is no Decline button. How so I make this show up?
    Thanks,
    Adam

    It does not solve the problem for me. I liked to decline people and instantly call them back (cause I have bonus calls) by simply sliding their name in the missed call that appeared right affter I declined.
    Now if I decline by double tapping the power button the missed call does now show up on the notification screen, so I have to unlock, go to my contacts and call back... Do I need to say this is terribly worst???

  • Where is decline button for incoming call?

    I would like to use decline or answer button instead of "slide to answer"
    It's much more easier. Or it should be updated to changeable option.

    Press the sleep/wake button to decline a call.
    If your iPhone is in sleep mode, you slide to answer.
    Send your feedback here
    http://www.apple.com/feedback/iphone.html

  • Fax line used for outgoing calls when incomming fax not coming in?

    So is there a way to do this? Can I route the 1 FXO to FXS for incomming calls (and plug fax into FXS) or something like this and then use that line as an outgoing line when not in use?
    I don't need step but steps but the basics of how something like this could be configured would be awesome!!!

    I'm not sure if I understand. I set this up, so I understand phone systems enough to do this, but I don't really don't know the terminoligy.
    Let me back up.
    Currently our business has 2 lines and a fax line. Right now the two lines are plugged into 2 FXO ports and the fax line is just plugged into the fax machine--not the UC320. We're in mixed mode, not pbx specifically. We get one or two faxes a day and we send two or 3 faxes a day. We'd like to be able to use the fax line for outgoing calls when it's not being used for fax.
    So I need to be able to control the in and the out of the fax line. I need all incomming calls for the fax number routed to what I assume would be the FXS port (with the fax machine plugged into the FXS port), and none of the other lines routed in this way (the other lines would go to the attendant).
    Then I need if we send a fax, we need for when the fax machine opens the line for it to automatically be routed to the fax line. Then the fax machine can dial and send faxes. I think we send few enough faxes that we're not too worried about what happens if we try to send a fax and the phone is busy, but it would be nice to be able to look at a phone and tell if the fax line is in use.
    I don't really care if the Fax line is part of a shaed FXO, it can be a seperate choice on the phone for making outgoing calls (one of the buttons next to the screen or something).
    Is all this possible? Is it only possible in PBX style or is mixed ok?

  • No sound at all for incoming calls, txts, games i tried everything reset, restore , delete content and reset , reset network settings. Alarm sounds work but notification sounds don't work please and mute button is in ring mode

    No sound at all for incoming calls, txts, games. I have checked the side mute switch. Volume is all way up. All notifications are on.  I can hear tones when I go to change them. I can hear my music.  I can hear talking on videos I have taken.  I have tried everything I know to do(reset,restore,reset network settings,reset content and other settings and mute button is not ON)Please help!

    This is exactly the same problem I am having. I dropped the phone one time I think that was the reason. Now I cant seem to find any solution to fix it and it will cost me $149 to buy a new phone? There has to be a way to fix this problem.
    When I put it in speaker phone I can hear but not voices through the phone.

  • Bluetooth no longer works for incoming calls after recent update

    When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.

    Magically started working today after I synced.
    Post relates to: Treo 700w (Verizon)

  • TS2634 My iPhone 4s does not ring for incoming calls. Ring tone is set/settings/sound. It used to ring. I think it has to do with updating to IOS 7.0.4? After updating IOS 7.0.3 my microphone stopped working. Had to clear/reload.

    My iPhone 4s does not ring for incoming calls. Ring tone set and used to ring. I think it has something to do with updating the IOS 7.0.4. When I updated to 7.0.3 the microphone stopped working. Had to call Apple Support and cleared phone and reloaded. ($57 charge). Any suggestions?

    Start with your finger at the bottom of the screen (about even with the home button) and swipe in an upward motion.  There should be a row of icons at the top of a grey field.  if the quarter-moon icon is bright white, tap it.  If it was (and still is) dark, take the iPhone in to be evaluated by a qualified technician.

  • Please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

    please help ... have new samsung ativ se windows 8 phone ... screen lock is on to require password, but on incoming calls its not locked ... how do i lock it for incoming calls too ???? thanks

    Personal rant, why do people write the entire problem in topic line
    It's not possible with Windows Phone 8.  What's the point, a call is coming in and the phone allows you to answer.

  • After update to OS4.2.1 I can not get the ringer to work for incoming calls

    after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring

    God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..

  • Callerid for incoming call

    I have configured some clients number as CCM users so that we can easily find and call them from the Corporate Directory. Is it possible for these clients names to show up in the phone for incoming calls (from PSTN)?Some kind of lookup in LDAP...
    I use CCM 4.2
    Darek

    The callerinfo service from the SDK should help you get started. Unfortunately, adding users in ccm only populates the directory - the info shown on the display when making calls is taken from the lines, and I have no clue how ccm would react if you created dummy phones with dummy lines that have the proper number.. the name would probably still not be displayed since the call doesn't come from the line in question but a PSTN trunk.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • My new iPhone 5S will not ring for incoming calls.  It vibrates. I've tried suggested tips for iPhone 4 but it doesn't work for 5S.  Please help!!

    Can anyone help.  My new iPhone 5S does not ring for incoming calls.  It vibrates.  How can I get ringer to work?

    Hello lyngos,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS2802
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    Best of luck,
    Mario

  • My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

    My phone displays numbers instead of contact names for incoming calls and text - how do I fix?  It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list.  Can anyone help?  I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

    Alexandribill, I have been having the exact same issue.  I got a new phone and restored my contacts.  If the # doesn't have the area code first then the name isn't shown.  I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
    I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

Maybe you are looking for