SPA525G2 unable to access admin settings
Hi,
I'm unable to access the admin settings of a new spa525g2 phone, when trying http://xxx.xxx.xxx.xxx/admin I get 403 Forbidden and the admin link on the gui does not appear. After a few seconds after booting the it is no more possible to acces the gui through the web access.
Reset the phone as shown here on youtube: http://www.youtube.com/watch?v=pq3jYvzTlJc
Should do the trick.
Be warned this should wipe your phone back to the factory defaults and you will have to setup your phone again from scratch!
Similar Messages
-
SPA525G2 unable to access admin section
I just received a new SPA525G2 phone, when booted the admin section is not visible through the web interface. When trying to access http://w.x.y.z/admin I receive a 403 Forbidden. When trying to factory reset, nothing more happens.
It seems that it was already connected to a uc320, but I just received it fro my vendor.I already tried to do this kind of reset, but without any success.I Can do a factory reset on the phone itself, but the same way, the admin part of the web gui is not accessible and after a few seconds the web gui itself is no more available.
IP Phone SPA525G2
Cisco Systems, Inc.
Voice
Wi-Fi
Bluetooth
Personal Address Book
Call History
Speed Dials
Info
System
Phone
User
Attendant Console Status basic | advanced
System Information
Connection Type:
DHCP
Current IP:
192.168.1.52
IP Status:
OK
Host Name:
SEP00077DC90AB0
Domain:
Current Netmask:
255.255.255.0
Current Gateway:
192.168.1.1
Primary DNS:
192.168.1.1
Secondary DNS:
Primary NTP Server:
Secondary NTP Server:
Bluetooth Enabled:
No
Bluetooth Firmware Version:
0.00.32a
Bluetooth Connected:
No
Bluetooth MAC:
Connected Device ID:
Wireless Enabled:
No
Wireless Connected:
No
Wireless MAC:
00:07:7D:C9:0A:B0
SSID:
Standard Channel:
Auto scan
Security Mode:
Reboot History
Reboot Reason 1:
Reboot Reason 2:
Reboot Reason 3:
Reboot Reason 4:
Reboot Reason 5:
VPN Status
VPN Connected:
No
Client Address:
Client Netmask:
Bytes Sent:
Bytes Recv:
Product Information
Product Name:
SPA525G2
Serial Number:
CBT15310BBD
Software Version:
7.5.2a
Hardware Version:
2.1.0
MAC Address:
00077DC90AB0
Client Certificate:
Installed
Customization:
Pending
Licenses:
None
Phone Status
Current Time:
12/31/1969 16:01:02
Elapsed Time:
00:01:03
Broadcast Pkts Sent:
0
Broadcast Bytes Sent:
0
Broadcast Pkts Recv:
0
Broadcast Bytes Recv:
0
Broadcast Pkts Dropped:
0
Broadcast Bytes Dropped:
0
RTP Packets Sent:
0
RTP Bytes Sent:
0
RTP Packets Recv:
0
RTP Bytes Recv:
0
SIP Messages Sent:
0
SIP Bytes Sent:
0
SIP Messages Recv:
0
SIP Bytes Recv:
0
External IP:
Operational VLAN ID:
N/A
SW Port:
100M Full Duplex
Ext 1 Status
Registration State:
Not Registered
Last Registration At:
Next Registration In:
Message Waiting:
No
Mapped SIP Port:
Ext 2 Status
Registration State:
Not Registered
Last Registration At:
Next Registration In:
Message Waiting:
No
Mapped SIP Port:
Ext 3 Status
Registration State:
Not Registered
Last Registration At:
Next Registration In:
Message Waiting:
No
Mapped SIP Port:
Ext 4 Status
Registration State:
Not Registered
Last Registration At:
Next Registration In:
Message Waiting:
No
Mapped SIP Port:
Ext 5 Status
Registration State:
Not Registered
Last Registration At:
Next Registration In:
Message Waiting:
No
Mapped SIP Port:
Line 1 Call 1 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 1 Call 2 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 2 Call 1 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 2 Call 2 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 3 Call 1 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 3 Call 2 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 4 Call 1 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 4 Call 2 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 5 Call 1 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Line 5 Call 2 Status
Call State:
Idle
Tone:
None
Encoder:
Decoder:
Type:
Remote Hold:
Callback:
Peer Name:
Peer Phone:
Duration:
Packets Sent:
Packets Recv:
Bytes Sent:
Bytes Recv:
Decode Latency:
Jitter:
Round Trip Delay:
Packets Lost:
Packet Error:
Mapped RTP Port:
End System Delay:
Loss Rate:
Discard Rate:
Burst Duration:
Gap Duration:
R Factor:
MOS-LQ:
MOS-CQ:
Media Loopback:
Downloaded Ring Tone
Status:
Idle
Ring Tone 1:
Not Installed
Ring Tone 2:
Not Installed
TR-069 Status
TR-069 Feature:
Disabled
Periodic Inform Time:
20 s
Last Inform Time:
0/0/0 00:00:00
Last Transaction Status:
Last Session:
0/0/0 00:00:00 - 0/0/0 00:00:00
ParameterKey:
Custom CA Status
Custom CA Provisioning Status:
Custom CA Info:
Not Installed -
OIM 9.1.0 installation- Unable to access Admin console
Hello OIM Gurus,
I'm new to OIM. I am trying to setup OIM 9.1.0 one of windows VM. After the installation i'm unable to access to oim admin console using link http://localhost:8080/xlWebApp
If I try to access the above URL i get "The requested resource (/xlWebApp) is not available" message.
Here are the details for the environment
Environment: Windows Server 2003 R2
OIM Version: 9.1.0
App Server: jboss-4.0.3SP1
Database (OIM repository): MS-SQL server 2000 sp4
Please throw some light on this.
Thanks.Thanks Kevin. I have looked at the setup-jboss.profile.log inder <OIM_HOME>\xellerate\logs . I could find the below error
move] Moving 1 files to C:\oracle_idm\xellerate\webapp\precompiled
[move] Attempting to rename: C:\oracle_idm\xellerate\webapp\precompiled\jsp-temp\tjspIndex.jsp to C:\oracle_idm\xellerate\webapp\precompiled\tjspIndex.jsp
[jasper2] log4j:WARN No appenders could be found for logger (org.apache.jasper.compiler.JspRuntimeContext).
[jasper2] log4j:WARN Please initialize the log4j system properly.
[jasper2] Error in class org.apache.jasper.JspC
BUILD FAILED
file:C:/oracle_idm/xellerate/setup/jboss-setup.xml:245: org.apache.jasper.JasperException: Unable to initialize TldLocationsCache: null
at org.apache.tools.ant.TaskAdapter.execute(TaskAdapter.java:155)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:193)
at org.apache.tools.ant.Task.perform(Task.java:341)
at org.apache.tools.ant.Target.execute(Target.java:309)
at org.apache.tools.ant.Target.performTasks(Target.java:336)
at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:39
Do you have any idea how do i fix this issue? Any help would be really appreciated. -
Lenovo G50-30 Unable to access BIOS settings after Windows recovery
Hi
I recently 'downgraded' a recently purchased Lenovo G50-30 with preinstalled Windows 8.1 to Windows 7 using a UEFI USB install on a GPT partition. I also updated the BIOS from A7CN40WW to the latest A7CN43WW and all was working fine. However, after performing a necessary restore of an system image created using the Windows 7 backup and restore tool, I am suddenly unable to access the BIOS settings, either with the novo button (I do get the menu to select BIOS) or with Fn +F2. All that happens is that I receive a blank screen with a static cursor in the upper left corner. I can however still access the boot menu Fn +F12. This is a particular pain as I obviousl can't select USB 3.0 in BIOS.
Any help here would be greatly appreciated.OK, I managed to clear CMOS by disassembling and desoldering a leg off the the RTC battery but to no avail. The problem seems to be that BIOS a7cn43ww itself has somehow been corupted. In theory this should be able to be resolved by a reflash. The trouble here is there seems to be no way to reflash with a current or previous BIOS version, so I'll have to either wait for a newer version or someone may know better.
C'mon Lenovo support this simply isn't good enough. It's a brand new laptop and I'm considering returning it for a refund. -
Unable to access passwords in security settings. Unable to access download folder, get a strong beep. Problem seemed to have just started.
Could be a problem with Advanced SystemCare.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Unable to access Admin Tools for portal after configuring LDAP realm
After setting weblogic to use the LDAP realm I am unable to access the Administration Tools. It does not take the username "administrator" and password "password". I've created the SystemAdministrator Group in LDAP as well as the appropriate "administrator" user but it still does not let me access the Administratotion Tools.
This thread is being discussed in the weblogic.developer.interest.portal
newsgroup under the same title. You can cross-post to multiple groups in
the future so that the thread develops in all newsgroups that you posted to.
"Wendy Kajiyama" <[email protected]> wrote in message
news:[email protected]..
After setting weblogic to use the LDAP realm I am unable to access theAdministration Tools. It does not take the username "administrator" and
password "password". I've created the SystemAdministrator Group in LDAP as
well as the appropriate "administrator" user but it still does not let me
access the Administratotion Tools. -
Unable to access Admin Console
Hi,
I have installed Oracle Database11g and WebLogic 10.3.0 Application Server successfully in LINUX-64 bit environment. At the end of OIM server 9.1.0.1 it displays "The Oracle Identity Manager Application Server setup has some problem. Refer OIM_HOME/Xellerate/logs/setup_weblogic.log for information about the problem" in the console. So, when i able to access Admin console. It throws Error:404.
Also setup_weblogic.log has the following error details
BUILD FAILED
/oracle/oimserver/xellerate/setup/setup.xml:443: The following error occurred while executing this line:
/oracle/oimserver/xellerate/setup/weblogic-setup.xml:196: Could not create task or type of type: wlst.
Ant could not find the task or a class this task relies upon.
Also nexaweb.war and xlWebApp.war is missing in Weblogic console page-> Deployment tab.
I have reinstalled the weblogic and OIM again but still getting the same problem..
Please help me to resolve this issue.
Thanks in advance.
Regards
Katheresh
Edited by: Katheresh on May 10, 2010 9:47 PMHey Kathy
did you setup ORACLE_HOME to weblogic_home, JAVA_HOME and added java to PATH. Also do you have any other ANT installed on your server.
Have you checked the OIM certification matrix for the version of various components like OIM, Weblogic and Database.
If you are sure that you did all this correctly, then perform the following:
The nexaweb classloader error is seen at times prior to performing the post installation steps. Then make a backup of the weblogic domain directory and the <OIM_HOME> directory.
1. Please continue and perform the postinstallation steps.
2. Restart the server
3. In the weblogic console, shcek to see that the xellerate and nexaweb applications have an "ok" status.
4. If not:
a. Please upload the oim server log.
b. Using the WebLogic console undeploy all oim applications including, xellerate, nexaweb and, if there, XIMDD, and SPML.
c. Delete the directory <OIM_HOME>/xellerate/webapp/precompiled
d. Delete the xellerate.ear and Nexaweb.ear from the directory <OIM_HOME>/xellerate/OIMApplications (Note: do this on all nodes of the cluster)
e. Delete the ant_backup.jar, optional_backup.jar and xercesImpl_backup.jar files from the OIM_HOME/xellerate/ant/lib directory.
f. Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/AdminServer/tmp/_WL_user directory.
g. Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/MANAGED_SERVER_NAME/tmp/_WL_user directory.
Delete the xellerate and Nexaweb directories from the BEA_HOME/user_projects/domains/DOMAIN_NAME/servers/MANAGED_SERVER_NAME/stage directory.
h. In the OIM_HOME/xellerate/setup/weblogic-setup.xml file:
i. Search for the following element:
<wldeploy action="deploy"
source="${WL_APP_LOCATION}/OIMApplications/WL${application.filename}"
name="Xellerate"
user="${weblogic_login_user}"
password="${weblogic_login_password}"
verbose="true"
adminurl="t3://${weblogic_server_target_url}:${weblogic_server_admin_port}"
debug="${action.deploy.debug}"
targets="${wl.deploy.target}" />
ii. Add a timeout value of 5400 as shown:
<wldeploy action="deploy"
source="${WL_APP_LOCATION}/OIMApplications/WL${application.filename}"
name="Xellerate"
user="${weblogic_login_user}"
password="${weblogic_login_password}"
verbose="true"
adminurl="t3://${weblogic_server_target_url}:${weblogic_server_admin_port}"
debug="${action.deploy.debug}"
targets="${wl.deploy.target}"
timeout="5400" />
i. Restart the WebLogic server and managed servers.
j.Open a terminal session and export the the JAVA_HOME and PATH environment variables.
k. In the same terminal session, change to the directory <OIM_HOME>/xellerate/setup
l. Run "patch_weblogic.sh"
This should reinstall that xellerate applications on WebLogic.
Hope this helps. -
Unable to access Mojikumi settings set by InDesign using jsx DOM
Hello all,
I am using Japanese InDesign version 7.5 on windows 7. I've set paragraph indent through mojikumi settings and trying to acces it through jsx object model. The following is what I did:
I have created a new Mojikumi set based on default LINE_END_ALL_ONE_HALF_EM_ENUM. All I have changed in new set is "Paragraph Mojikumi Indent" from none to 1 char. I want to access this setting from java script using its object model. I've tried the method paragraphObject.mojikumi.overrideMojikumiAkiList which seems to be the related method to access the customized settings. The output of the function I'm getting is a big array:
2,23,false,1,1,1,0,false,3,23,false,1,1,1,0,false,4,23,false,1,1,1,0,false,5,23,false,1,1, 1,0,false,6,23,false,1,1,1,0,false,21,23,false,1,1,1,0,false,7,23,false,1,1,1,0,false,8,23 ,false,1,1,1,0,false,9,23,false,1,1,1,0,false,10,23,false,1,1,1,0,false,11,23,false
,1,1,1,0,false,12,23,false,1,1,1,0,false,24,23,false,1,1,1,0,false,25,23,false,1,1,1,0,fal se,18,23,false,1,1,1,0,false,33,23,false,1,1,1,0,false,28,23,false,1,1,1,0,false,29,23,fal se,1,1,1,0,false,30,23,false,1,1,1,0,false,31,23,false,1,1,1,0,false,32,23,false,1,1,1,0
,false,1,23,false,1,1,1,0,false,26,23,false,1,1,1,0,false,27,23,false,1,1,1,0,false
Of these values, how can I deterministically find the one that corresponds to paragraph mojikumi indent? Also the size of array seems to be changing as we add or change override values for diefferent mojikumi sets. So its definitely not based on array index.
API description says:
overrideMojikumiAkiList
Array of
akiDoesNotFloat:Boolean
compressionPriority:Short Integer
desired:Real
maximum:Real
minimum:Real
Ordered array containing targetMojikumiClass:Short Integer
sideIsAfterTarget:Boolean
sideMojikumiClass:Short Integer
r/w
The mojikumi overrides for aki. Can return: Ordered array containing targetMojikumiClass:Short Integer, sideMojikumiClass:Short Integer, sideIsAfterTarget:Boolean, minimum:Real, desired:Real, maximum:Real, compressionPriority:Short Integer, akiDoesNotFloat:Boolean.
Any pointers to help links or any insights on how to decode the above array deterministically for all mojikumi sets will be of great help to me.
Thanks,
SrikanthHi
here is link when..
I get Diff custom setting and default setting
http://www.milligramme.cc/wp/archives/537
and get applied mojikumi sets in most front document
http://www.milligramme.cc/wp/archives/3368
I hope you will find it helpful
thanks
mg. -
Unable to access admin console - WRVS4400N...
Hi first time poster and Cisco forum user - although I hasten to point out that I have owned and used an 'IBM' type PC since 1988 and have always managed to get things configured correctly until NOW!
...and have never been so frustrated - apart from the last time I tried to use a Linksys product (I cannot remember the exact model - someone gave it to me as part payment for a job - I wound up throwing it away and buying something else). I had the WRVS4400N recommended to us by a friend as we run a small FTP server to share promotional materials amongst sales operatives around the world, wanted to protect it from intrusion and was told that a Cisco Linksys product with a VPN was the way to go.
I duly purchased a WRVS440N and have been trying to log into the admin console via both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... I have tried accessing it via http://192.168.1.1 and have even tried a suggestion from another forum to try https://192.168.1.1 - this only results in my being told that the address does not have a trusted certificate and I even tried every suggested workaround...
I have tried all kinds of reset periods from 10 seconds to a minute, both hot and cold and each time the result is the same - I type in 'admin' and 'admin' in the appropriate boxes and the dialogue box continues to return to the browser window with empty fields...
The shame is that I have managed to re-flash a BT Voyager 190 ethernet modem successfully with DynaLink v3.29a firmware (which allows it to be used with any ISP besides AOL [for whom this modem was solely intended]) and can set it up as a DHCP server, non-DHCP with a single link to another server or non-DHCP and no link.... The point is the modem works... I'm using it right now to type this! We have a single static IP from our ISP and the BT modem is working just fine (as is the TP-Link wireless modem/router that the WRVS4400N was intended to replace)... there are other options in it's firmware for port forwarding, etc and I'm convinced that it wil be adequate for use in conjunction with the WRVS4400N.
I have to concede that the WRVS4400N was not sold to us as NIB; it was sold as re-conditioned and was shipped to or via Ingram Micro Distribution from Cisco Systems, Veldweg 3, Herkenbosch 6075 NL (Holland) via UPS on or about the 31st of July, 2012... there is a shipping label on the original packaging that tells me that so it has in fact been back to Cisco at some point and for some reason. It was purchased from an online dealer in the UK. I do suspect - however - that this might be resolved with a little help from an expert.
Has anyone got a clue?
Many thanks,
RobHi Dave,
Thanks for taking the time to reply... Yes is the short answer - but the problem wasn't a dodgy firmware upgrade or anything of the sort...
I simply could not get started with this device - because it had been sold and returned to said supplier who simply assumed the original customer was telling the truth when they said they hadn't used it and had simply decided to return it unused... nor had the supplier checked to make sure that the user interface had been reset to defaults.... so it had simply been shipped to me with whatever username and password said 1st hand customer had put into it...
Fortunately I know a proper IT professional or two... One of whom has managed to find and download the proper installation manual and re-set the device properly for me...
I shall find out how tomorrow and post the info right here... apparently it's not as simple as holding the reset button in for 'x' amount of time... and am quite happy to share this and any other info I may glean from the experience..
BTW - it is a V2.0 made in April 2011 - apparently these are quite a bit of kit and are no longer made...
Many thanks to anyone who has even scratched their head over this ...
Will shout up soon...
Rob -
Unable to Access Router Admin Page
So I have a weird situation where my router is working fine to allow me access to the internet, yet I am unable to access the router administration page, 192.168.1.1 This occurred after the router froze up tuesday. I reset the router to factory defaults and have since been able to get online, but not access admin page. Router is a Linksys WRT-54GS V 7
Modem is motorolla SB1505
ISP is earthlink, but in NYC so its actually off the Road Runner network. Cable connection obviously. - I attempted to access 192.168.1.1 with both Mozilla Firefox and IE 8. FIrefox gives an "Unable to connect" error message. IE 8 redirects me to search engine results (yahoo in this case).
-Ipconfig confirms default gateway and DHCP server is 192.168.1.1, subnet mask 255.255.255.0
- I am able to ping the router with <1ms times.
- I have tried resetting router to defaults again, but same issue occurs.
- I am able to get online and access web pages, etc.
- Tried resetting up the router using the Linksys setup program, but it error every time saying "please connect router for broadband"
- Router worked fine with me able to access admin page until it froze up yesterday.
- Wireless works fine. Though the network is unsecure atm, since I can't access router admin.
- I've also tried disconnecting all other devices from the router except my computer and modem. Still wont let me access router. System is running windows 7 PRO, fully updated. However, I can't access the router either on 2 other computers at home which run windows XP PRO SP3. System Specs CPU: Intel i5 running at stock speeds
Mobo: Gigabyte P55-UD4P
Ram: Gskill Ripjaw, 4 gb DDR3-1600 7-7-7-21
HD: Intel X-25 M 80 gb G2.
PSU: Corsair CMPSU 750 TX
GPU: Diamond ATI 5850 Anyone have any ideas on whats wrong here? Did i miss something obvious? Would greatly appreciate any help as having an unsecure wireless network in the middle of NY isn't the best idea. Thanks!
Message Edited by Banthracis on 11-06-2009 04:25 PMI am once again unable to access the on-line Router admin page. When I use the EasyLink Advisor and click ADVANCED settings it pulls up the browser but goes nowhere. If I type in the address directly it does the same thing. The address I'm typing is correct. I know because if I unplug the router for a minute, I can get on using the EasyLink or entering the address directly into the browser. Then I sign in and can access the pages.
Why do I have to keep resetting the router to access the router admin pages? It doesnt matter about virus protection, firewall, what version of Windows I'm using, what browser I'm using...the only thing that matters is resetting the router.
And now I have a new problem. When I attempt to go online with my new netbook, it causes my wired-to-the-router desktop to loose the connection, even though I reset the router and "added it as a new device".
I was using Homegroup to access the netbook the first day I got it. Now I cannot access the netbook or the network from the netbook, without resetting the stupid router every single time. I am not using mac address filtering and have the router set to allow 9.
Getting fed up with this router and I never get an answer from Linksys as to why I can never access the router admin pages without resetting the stupid router.
I can get the netbook on other people's wireless networks (using their password) but cannot get onto my OWN using my password.
Does anyone have any ideas? I'll try anything before yanking this thing out and buying a different brand of router. Yeah I'm mad, sorry.
Wired desktop Windows 7 Home Premium 64/IE8/using Windows firewall and MS Security Essentials. Netbook is W7 Starter, Norton Internet Security 2010. But none of this matters. Because I had the same problem with this router using Vista64, IE7, no firewall, no a/v, IE32 & 64 bit...all those variables yet the only thing that works is resetting the router.
SO WHAT DOES MATTER? Help me before I trash this thing please.
mlure -
iCloud backup is unable to access my account, because email I used for iCloud account is been deleted. And my iPad is stuck with this note on a screen, can't go Settings. How do I delete or edit my iCloud account?
You can eirther I think go on ITunes or if you can get to settings you would just go to iCloud.
-
I changed my AppleID password and now my iPad2 is locked with a message... "iCloud Backup is unable to access the account. Review your account information in Settings." It will not allow me to unlock the device or go to settings or ignore the message. Suggestions?
<Email Edited by Host>I have the exact same problem. I have since gone into iCloud via my PC to reset my iCloud password, but did not help. Can someone pls help!!!!!!!!!!!
-
I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
I have just updated my iPad2 with iOS 6.3.1. and now I am unable to access my home network. The Wi-Fi icon in the status bar is not shown.
Under settings, Wi-Fi it shows my network name and under the Wi- Fi menu, chose a Network it shows it is searching for my network by name and continues to run and run without finding the network.
Prior to updating to iOs 6.3.1 my system worked perfectly.
Can anybody help please.1. Turn off router for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.
Maybe you are looking for
-
Having a problem with gif image not showing up. It will show up in netscape6.2, but not in IE 5.0. Both are using the java 1.4 plugin. They are basic buttons (zoom in, zoom out, etc) and they actions work, just the icons aren't showing. Any help woul
-
How to make a Macbook Pro work at a normal pace?
My MacBook Pro is just 5 months old and it has already become really slow. I am not very techno-savy and so I need desparate help to make it work at a normal pace. Please help.
-
How to delete conext entries in JNDI tree after undeployment?
Hi, When I deploy an EAR or JAR file with EJBs, they bind in the JNDI server. When I undeploy the application the beans are no longer bound to the JNDI tree, but the contexts they created remain. For example, I deploy a bean that binds its home objec
-
My ipod touch is not recognised by the computer or by itunes. All we get on the ipod is the apple logo and it won't do anything else. How do we restore the factory settings?
-
Safari doens't show background Image when sliding page left
I display a web page with a large-width photo (say 2000 pixels jpg file) & a repeat small background image in mobile Safari & the right part of photo is beyond the screen. I touch & slide the page left to see right part but found there's no backgroun