SPA9000 firmware version 5.2.5 - Newbie User

Reading the release notes for this firmware upgrade it seems that 16 users are now supported by default (hardly seems fair on people who have purchased the licence) - but using the wizard V1.1.0.7A the extensions above 4 are greyed out - do I need LVS wizard V2.0 as also stated as being supported in the release notes - where do I get that from - I can't find it on the web site. Or....have I completely misunderstood the whole thing?
Also still struggling to get non-Linksys phones working with the SPA900 - should I stick with it or give up? Tried the 6060 port but not doing very well.
Thanks
Steve

English isn't your native language, is it? The short answer is yes.
There are two essential pieces to tracking down a problem with your VoIP equipment:
The configuration of every device involved
SIP protocol traces
And don't forget: there's no such thing as giving too much information when describing a problem.

Similar Messages

Problem with restore.I have a 2 gen running firmware version 4.2.1

Hello there !
Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
Thank you tons for the help !
@Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00AAB2F80F513CD0
Current user is an administrator.
The current local date and time is 2011-07-17 18:45:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
IP Address:     192.168.2.10
Subnet Mask:     255.255.255.0
Default Gateway:     192.168.2.1
DHCP Enabled:     Yes
DHCP Server:     192.168.2.1
Lease Obtained:     Sun Jul 17 17:51:16 2011
Lease Expires:     Wed Jul 20 17:51:16 2011
DNS Servers:     192.168.2.1
Active Connection:     Connexion réseau
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is off.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-17 18:43:19.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Contrôleur d'hôte ouvert PCI vers USB NEC. Device is working properly.
Contrôleur hôte PCI vers USB standard étendu. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (2nd generation) running firmware version 4.2.1
Serial Number:     9E01226F201
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4). Everytime I open the airport utility I get the following message: "
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
I'm getting the exact same message on my other computer, a Mac Air.
So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
Thanks!

See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

All RVS-4000's with firmware versions less than 1.3.2.0

Hi,
For those of you without the time to explore the Cisco site. I thought you guys might want to know about the following vulnerability. Which is fixed in the latest firmware version 1.3.2.0 for the RVS-4000:
Cisco Security Advisory: Cisco Small Business Video Surveillance Cameras and Cisco 4-Port Gigabit Security Routers Authentication Bypass Vulnerability
Document ID: 111641
Advisory ID: cisco-sa-20100421-vsc
http://www.cisco.com/warp/public/707/cisco-sa-20100421-vsc.shtml
Revision 1.1
Last Updated 2010 MAY 19 2030 UTC (GMT)
For Public Release 2010 APR 21 1600 UTC (GMT)
Software Versions and Fixes
To determine the software version running on a camera, administrators can click the "About" tab at the top-right of the device user interface. The software version information can be obtained on the System Status page under the "Status" tab.
The latest camera software can be downloaded at http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=282414029 ( registered customers only) .
The software version of the RVS4000 is displayed on the main router page displayed after users log in.
The latest RVS4000 software can be downloaded at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=282413304 ( registered customers only) .
When considering software upgrades, also consult http://www.cisco.com/go/psirt and any subsequent advisories to determine exposure and a complete upgrade solution.
In all cases, customers should exercise caution to be certain the devices to be upgraded contain sufficient memory and that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, contact the Cisco Small Business Support Center or your contracted maintenance provider for assistance.
Product
First Fixed Version
PVC2300
1.1.2.6
WVC200
1.2.2.0
WVC210
1.1.0.15
WVC2300
1.1.2.6
RVS4000
1.3.2.0
Bruce

Yes, I posted this same information in the Video Surveillance section a few weeks ago. it was actually a Partner on the
community who found this and brought it to our attention and we fixed it.
Thanks for cross posting here, since you are right in it also effected this router.
And a big thank you for taking the time to collaborate some very useful information with the community. I have noticed your recent posts and I think they are well writen, helpful, and well organized. I also like your idea of turning some threads into solutions documents and resource labs perhaps.
If you would ever like to post something of that natire, you may also. Just creat a document with your findings.
Steve

WEBSITE BLOCKING ON WRT54G V6 (Firmware Version: v1.02.8)

Hello Friends,
Short: why some webpages block and others don't using this feature in my router? As mentioned above, I run a small office and am using an ::: WRT54G V6 (Firmware Version: v1.02.8) ::: router.
For instance, I have been successful in blocking sites such as "sex.com" and others. Also, in blocking sites by keywords such as: news, music, vid, nude, etc. BUT, when I try blocking FACEBOOK or TWITTER either by URL or keyword, guess what: IT DOES NOT WORK...!
Any ideas why this happens and how can I be successful in configuring this feature??? I will appreciate this! Blessings...
Solved!
Go to Solution.

Those sites have a random connection and DNS entries. Your best bet would be to use a DNS servcie like DDNS.com or OpenDNS.com service. Point your router to one of those DNS services and there DNS addresses, then set up one of those services to block FB and Twitter. If you use there DNS addresses on your router instead of the ISP DNS, and you block FB and Twitter, users should beable to get to FB or Twitter after that.

UCS firmware version question

Hello guys!
I've seen from Cisco download for UCS B series firmware versions, there are 2 latest versions which 2.2.(1d) and 2.1.(3c), what are the different between these 2 versions? My current firmware is 2.1.(1b), should I update to 2.1(3c) or 2.2.(1d)? Thanks.

Hello,
The difference is that they belong to different chains (one is 2.1 and the other 2.2) where we made some improvements in the firmware. UCS, unlike other Cisco devices, do not follow an specific order in the firmware versions released; so you may see, at anytime, how a 2.1x version may be newer than a 2.2x version; precisely cause that 2.1x will be the newest one for the 2.1 chain while the 2.2x will be the newest one for the 2.2 chain but release on a different day.
The other difference is the bugs we fixed on each release, which might not be included in the other one.
The UCS behavior can also change from version to version, and here is an example: https://supportforums.cisco.com/discussion/11673921/default-zoning-users-heads-ucsm-21
If you want to see how one version differs from the other, what you can do is to check the release notes for each one:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/UCS_28313.html <<<< 2.1 Release Notes
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html <<<< 2.2 Release Notes
Rate ALL helpful answers.
-Kenny

Air update phone firmware version

How do you update phone firmware version?
1. Download Nokia pc suite and use NSU or Nokia ovisuite (For Windows User only)
2. Try over the Air update (MAC/Windows User)
If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
Go to tools >Utilities> Device manager (location may vary by device)
There should be an updates tab
This functionality may not be available in your device. Contact your service provider for more information
To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
To check whether software updates are available select Options> Check for Updates
First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
Server Profile Settings
Menu> tools> utilities> Device Manager
to add a new server profile seleat Options> New server profile.
Contact your service provider for correct settings
Server name- Enter a name for the configuration server
Server Id- Enter the unique ID to identify the configuaration server
Server Password- Enter a password to identify your device to server
Access point- Select the access point to connect to the server
Host Address- Enter the url address of server
Port-Enter the port number of the server
User name & password- Enter your username and password for the server
Allow configuration- To allow receiving configuration settings from this server select yes
Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Like how did nothing happen >> no connection >> no message ??
CAN I UPDATE >>
http://europe.nokia.com/support/download-software/device-software-update/can-i-update
jje

NEW Firmware Version 6.01

All,
We are releasing version 6.01 firmware for the F5, and F55 motion picture cameras. Thank you for your feedback in discovering the S/Q, Center Scan issue.
When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This update fixes it.
This update includes all other features and functionality as posted in the previous version 6.0 announcement
http://www.community.sony.com/t5/F5-F55/NEW-Version-6-Firmware-F5-and-F55/m-p/506807#M28137
PMW-F55/F5 Firmware Version V6.01 Release note
June 30th, 2015
This document explains about firmware update of PMW-F55 V6.01 from PMW-F55/F5 V6.00. The latest firmware version of related products is below.
Product name
Latest firmware
Release date
PMW-F55
V6.01
This announcement
PMW-F5
V6.01
This announcement
AXS-R5
V4.1
Aug 8th, 2014
AXS-512S24
V1.2
June 5th, 2013
AXS-A512S24/A1TS24
V1.0
Mar 17th, 2014
AXS-A256S24
V2.0
Mar 26th, 2015
AXS Utility Software
V1.3
Feb 28th, 2014
RAW Viewer
V2.2
Feb, 28th, 2014
This firmware can be updated from V6.00, V5.11, V5.10, V5.0, V4.12, V4.11, V4.1, V4.0, V3.0, V2.11, V2.1 and V2.0. When you want to update F55 and F5 from V1.22 and earlier, you must update to V2.0 first. https://community.sony.com/t5/F5-F55/NEW-Firmware-release-Version-2-0/m-p/195623#M6582
Regarding the procedure and functions about V2.0, please refer to “PMW-F55/F5 Firmware Version V2.0 Release note” which was released on Oct 4th, 2013. And F55 and F5 must not be downgraded to previous versions after updating to V2.11. We couldn’t guarantee any troubles after downgrading. An “All File” generated by a previous firmware version can be loaded to V6.01 of F55 and F5.
NOTE:
The new Firmware V6.01 for PMW-F55/F5 is only compatible with AXS-R5 running with Firmware V4.1. If your AXS-R5 has installed an older version, please update to the current Firmware V4.1 the same time. https://community.sony.com/t5/F5-F55/NEW-F5-F55-Firmware-Version-v4-11-and-AXS-R5-v4-1/m-p/410782#M19813
<<Modification from V6.00 of F55 and F5>>
Bug Fix
When S&Q setting was set “On” in 2K Center Scan mode or 2K Full Scan mode and the power was turned Off and On, Recording did not work. This has been fixed.
Sometimes specific All Files could not be loaded. This has been fixed.
<Notification we would like to share>
iOS setting for Wi-Fi Remote
While using Wi-Fi Remote by iOS devices and Safari, please turn off Private browse function.
All file Support
All files which are created with Firmware V6.01 are not compatible with an earlier firmware version.
<< Version up procedure >>
Please refer to “Version Up Guide for PMW-F55 and F5” - documents are below for download
Firmware download:
F5
http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F5_V601_6.01_4_2015-06-24_14-42-14_firmware.zip
F55
http://pro.sony.com/bbsccms/assets/files/show/highend/downloads/PMW-F55_V601_6.01_5_2015-06-24_14-42-07_firmware.zip

Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence. Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

100% CPU usage. RV180W Firmware Version 1.0.2.6

Since I updated to Firmware Version 1.0.2.6 cpu usage shows 100% with no sing of lowering.
So since 2 days now its always runngin at full speeds for no reason.
Firmware Update, Factory Reset, Setup as before. => 100% CPU
Is this a common problem? Is there any fix for that? Or at least a way to get informations what causes this?
Kind reagards
bartlingja

Hi, we can try something, please download the firmware thru this link, and install it again, then configure just the necessary configuration. If the issue continues, could you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

N93 no new firmware version available

Hi,
I'm a brand new discussion board user.
I' bought my N93 thre months ago. My phone ID is 0531236 and my firmware version is 11.0.034.
I've bought also a bluetooth headset BH-900 but it does not work. I've found in this board that there is a new firmware version (20.0...)
that seems to fix the problem. If I try to update my phone via PC application I receive "no new firmware available" as answer.
Any problems with my phone and firmware version?
Thanx in advance for any replies
-- gigi

Well, my GE 31591GE1 keeps working just fine although still shows that message about available update. Anybody running firmware version 22.3 that would like to comment on this?

3G iPhone firmware 2.2.1 (5H11) - 02 User In UK

Hi 3G iPhone Users,
Has anyone else noticed that with the most recent firmware update of 2.2.1 it has caused the iPhone Google Maps to use only Km. I have tried everything to switch it back to Miles (Imperial) - but to no avail. I contacted 02 support today and they said it is due to the most recent firmware update.
One person in the tech support division of 02 had an older firmware version on his iphone - he could get the distance in miles. The other people with 2.2.1 - could only get Km.
Apple - can you please address this? Your clients in the UK would likely appreciate Miles. Not sure what is happening with your clientele in the United States - it goes without saying, they probably prefer miles as well!
Thanks
3G Ginger Six String

Yes, this happened with a recent firmware update. US distances in Maps still show in miles, and if you change Settings > General > International > Region Format to United States, they will show up in miles for you as well (although your date and phone number formats will also be affected).
FYI, though, "we" are not Apple - this is a user-to-user forum.
You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

New Firmware Version 1.0.5.1.00 released for EOS C500 & C500PL Cinema Cameras

New EOS C500 & C500 PL Firmware Version 1.0.5.1.00 offers numerous improvements to functionality including compatibility with the Canon RC-V100 Remote Controller. Learn more about this Firmware update and download the update.

Hi, AlexK. I just found the answer for your question in F5/F55 user manual(v.6), on p. 46.In a word, you can't use your double speed viewfinder function.Refer to the last sentence. Viewfinder Double Speed function is not effective on the following settings.- When System Frequency is 59.94/50.- When Recording format is SStP Sr-SQ 444 / SStP SR-SQ Lite 422 / SStP SR-SQ 422, ProRes 422, DNxHD 220x / DNxHD 145.- When "Setting" in "Slow Shutter" of the Camera menu is set to "On."- When "Setting" in "S&Q Motion" of the Camera menu is set to "On," and the "Frame Rate" setting is 1 to 60P. At this moment, it's not available to everyone.Hope Sony make it available with future firmware update, if technically possible. Bryan

Change Boot Policy and Firmware Version for Service Profile using UCS PowerTool

I'm looking for the PowerTool syntax to modify both of these values on individual service profiles. The documentation behind most of these cmdlests is almosts non-existent.
I believe the boot policy may be able to be changed like this:
Set-UcsServiceProfile -BootPolicyName
As for the host firmware version under the policies tab of the SP... I have no idea what that cmdlet would be.
See attached images for examples.
Thanks in advance,
JD

Hello,
One version of the User guide for UCS powertool can be found here:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/msft_tools/powertools/ucs_powertool_book/ucs_pwrtool_bkl1.html
That guide makes notes of the following commands in regards to HFPs:
Host Firmware Package
Create a Host Firmware package and set IgnoreCompCheck to No.
$host_firm_pack = Add-UcsFirmwareComputeHostPack -Name host_firm_pack -IgnoreCompCheck no
Add a Host Firmware pack item.
$host_firm_pack | Add-UcsFirmwarePackItem -Type adaptor -HwModel N20-AC0002 -HwVendor "Cisco Systems Inc"
-Version '1.4(1i)'
Set version of Host Firmware pack item.
$host_firm_pack | Get-UcsFirmwarePackItem -HwModel N20-AC0002 | Set-UcsFirmwarePackItem -Version '2.0(1t)'
Remove Host Firmware package.
$host_firm_pack | Remove-UcsFirmwareComputeHostPack
I would also like to recommend the Cisco Developed integrations section which may be more specific to the powertool:
https://communities.cisco.com/community/technology/datacenter/ucs_management/cisco_ucs_developed_integrations/content?filterID=contentstatus[published]~category[ucs-powertool]
As well as the Cisco Developers Network:
https://developer.cisco.com/site/devnet/home/index.gsp
Regards,
-Gabriel

Update Nokia phone firmware version

How do you update phone firmware version?
1. Download Nokia pc suite and use NSU.(For Windows User only)
2. Try over the Air update (MAC/Windows User)
If your mobile data rates allow, try doing an over the air update. Support varies by phone, variant and software
Go to tools >Utilities> Device manager (location may vary by device)
There should be an updates tab
This functionality may not be available in your device. Contact your service provider for more information
To view or update the current software version of your device or to check the date of a possible previous update, select Menu> Tools> Utilities> Device mngr
To check whether software updates are available select Options> Check for Updates
First off BACK UP YOUR DEVICE! make sure you have a back up of the memory card and also the device memory and make sure that the battery of your device has enough power or connect the chager before starting update. To start the update select access point. The device starts to download the device data.
When the data is downloaded the update description is displayed. Select Accept to accept the download of the update package or cancel to cancel the download. IT may take several minutes and you can use your device during the download but not during installation time.
Server Profile Settings
Menu> tools> utilities> Device Manager
to add a new server profile seleat Options> New server profile.
Contact your service provider for correct settings
Server name- Enter a name for the configuration server
Server Id- Enter the unique ID to identify the configuaration server
Server Password- Enter a password to identify your device to server
Access point- Select the access point to connect to the server
Host Address- Enter the url address of server
Port-Enter the port number of the server
User name & password- Enter your username and password for the server
Allow configuration- To allow receiving configuration settings from this server select yes
Auto Accept all requests-To have your device ask for your confirmation before accepting configuration from this server. Select NO
Network Authentication- Select if network authentication is used. Enter your Network username and Network password to identify your device to the server.

Before updating your Nokia's firmware you should check that the newer version does not break Bluetooth and iSync abilities.
From the many reports on these and other forums, it seems people who have recently updated their Nokia phones firmware have found it impossible to get their phone and Mac to communicate.

URGENT!! How to know the firmware version of a 2530M2 Storage Diskarray via Serial Console.

Hi,
I have a standalone 2530M2 Disk Array on the rack. I wish to find out the firmware version.
Please suggest how to find it out.
URGENT!!!
Thanks,
Sabyasachi

1009518 wrote:
Hi,
I have a standalone 2530M2 Disk Array on the rack. I wish to find out the firmware version.
Please suggest how to find it out.
URGENT!!!
Thanks,
Sabyasachi
There is no "Urgent" in these forums.
They are user-to-user forums and there is no one sitting around, waiting for you to ask a question.
Forum participants choose to respond on their own choice.
If you have a critical business need
(and that means your organization will go out of business unless you get a solution)
then you will need to use your service contract privileges and log a support ticket with ORACLE's technical support.
Your question is definitely not something that will put a company out of business.
Read the product documentation. The answer surely is in there.

SPA9000 firmware version 5.2.5 - Newbie User

Similar Messages

Maybe you are looking for