SPA901 doesn't accept HTTP anymore, only ping

Hi everybody,
we bought 2 SPA901 phones about 10 months ago.
Now, one of them doesn't connect to the VOIP service provider anymore. The red light is flashing constantly.
Also, I'm unable to access the configuration menu with a browser.
The phone answers ping messages, but all attempts to connect via a browser (Opera, lynx) get a TCP FIN-RST packet response, so the browser says "Unable to connect to remote host."
The phone also doesn't react to key "****" presses anymore.
So. the phone is basically working, doing Ethernet and ping, but the higher application including key presses and Web server seem to hang. Powering off even for hours doesn't help.
Is there any cure like an internal reset or is it possible to get a new firmware somehow via downlaod or with a new chip?

We have set up an IP PBX system using an SPA9000 as server and 5 Linksys IP Phones (2 SPA941 and 3 SPA901). Actually we are having problems with 2 SPA 901.
On the SPA9000, the pbx status shows that all 5 phones are correctly registered. However from time to time, the red light (NOT the status LED) on the SPA901 flashes and we are unable to process calls.
Sometimes this problem is solved without any intervention from our side. At times we have to reconnect the ethernet cable to the phone for it to stop flashing. And very often the red light does not stop flashing making it impossible to make or receive calls.
We have checked the datapoints to which the SPA901 phones are connected and there are no problems with them whatsoever.
Is it possible that the SPA901 have some kind of bug?
Please advise.

Similar Messages

Squid doesn't accept https requests

I have a server running Arch i686 and installed squid as a web proxy server. I can connect to it through, say Firefox, and it serves all the pages except SSL'ed ones.
It simply throws a generic Firefox error. What do I need to enable in my squid.conf so that squid will forward the https requests to their intended destinations?

Oh, I see... Avoiding man-in-the-middle attacks is nice and everything, but I still need a way of sending https requests through a proxy. Here's why:
At work, they are using this "websense" content filtering thing and it blocks everything! Not just nsfw stuff, but even some news pages etc. For example, I couldn't access the link you've just posted, because it is blocked under the category "proxy avoidance". See my problem?
Any ideas on what I can do?

Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab.

Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab so you can't use Command Q or Command R for reloading...GRRRRRrrrr, hate this

As I asked previously are you able to have tabs open as a window by using the right clicking option ?
When you close Firefox you should use
*'''Firefox button -> File -> Exit '''
Are you doing that ?
I suspect what may be happening is Firefox is hanging as it closes down.
* see [[Firefox hangs or is not responding - How to fix#w_firefox-hangs-when-you-quit-it]]_firefox-hangs-when-you-quit-it
* this explains how to check & if necessary kill the process [["Firefox is already running but is not responding" error message - How to fix it#w_end-firefox-processes]]_end-firefox-processes
A related possible problem is that you may have built up many copies of the restore files. These are stored in the Firefox profile. The easiest method of finding the profile location istouse
*use '''Firefox button -> Help -> Troubleshooting Information -> [Show Folder]'''
*see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
You need to look for the files ''sessionstore.js'' and numbered duplicates of that. Delete them.
* see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore.

Please help me. I can't open my Ipod touch. I enable voice over settings on my Ipod Touch 5th gen. I can't disable it anymore. I off my ipod and now i can't open it. It doesn't accept my password. I can't open it anymore. Thanks!

Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

Why won't my iPad air charge anymore? I bought a new cable but it still doesn't charge, it is only 3 months old.

Why won't my iPad air charge anymore? I bought a new cable but it still doesn't charge, it is only 3 months old.

If you are still having problems with your iPad, it is still under AppleCare.
Bring it into an Apple Store to have it diagnosed and repaired under warranty.

IPHONE 4 DOESN'T ACCEPT WIFI PASSWORDS ANYMORE - PLEASE HELP!

Hi all,
My iPhone 4 out of blue decided not to accept the wifi password- it says "wrong password for xxx network" - it's my home one it always worked-
I was away and worked fine for a week in others houses (where the password was stored already) went to other house, tried to connect with passwprd and started saying the pw was wrong - got home last night and didn't connect right away as usual(maybe because I've reset the network when away) so I've put the pw in and again says it's wrong - Of course the password is correct - laptop works fine and iPod touch as well - At work there is a non protected wifi and it connects fine - So looks like the iPhone doesn't accept passwprds for the wifi
I've tryed to reset the network few times, reboot it few times, reset all settings and update the sofware (version 5.0.1) - nothing worked - aw also unpluged and re-pluged the router at home (knowiing wouldn't' help)
PLEASE help, very frustrating - I've seen few people had the same issue but nothing worked.
Thanks

You're welcome.
Incorrect. The passcode lock is not included with the backup. The restrictions passcode is, but not the passcode lock. If it were included with the backup, you would need to restore as a new device or not from the backup. Either way, you must restore with iTunes which is the only way around a forgotten passcode.

My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?

My MacBook Pro doesn't accept CDs or DVDs anymore, but it did when I bought it 2 years ago. How can I get it to read disks again?
My quess is that the new software just doesn't allow the disk drive to work. I would love an explanation why this doesn't work and some help getting it to work. It's really frustrating because I get a bunch of CDs from work and never get to listen to them on my MacBook.

Make sure the discs are free of finger prints. The optical drive cannot read a disc with smudges and dust.
Check Finder > Preferences > General
Make sure: CDs, DVDs, and iPods, is selected.

I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

I have an old airport express base station from 2005
I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
Can i update the firmware? has it become useless because too old or what can i do?
I work on macbook pro with macOSX 10.9.4
Can someone give me some tips please
thanks
J

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

How can I tell if my local webserver is configured to accept https requests?

I have phpMyAdmin on my localhost server.
How can I tell if the localhost server is configured to accept https requests? Or is that unnecessary on a localhost server?
Below is the info from the phpMyAdmin home page:
Server: 127.0.0.1 via TCP/IP
Server version: 5.0.81
Protocol version: 10
Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 PHP/5.3.6
MySQL client version: mysqlnd 5.0.8-dev - 20102224 - $Revision: 308673 $
PHP extension: mysqli
phpMyAdmin
Version information: 3.3.1
Many thanks for information and advice concerning this.
Best,
Sheley

Well, for one, by definition, localhost can only ever be accessed from the machine itself. It doesn't get any more secure than that.
However, just because you're hitting the site on localhost that doesn't mean that Apache isn't also listening for connections on other IP addresses. In fact, by default, Apache will listen on all IP addresses configured on the machine.
Therefore you might want to look a little deeper.
You can see from the phpMyAdmin output that Apache is configured to support HTTPS, but that only tells you whether apache knows how to speak HTTPS, not whether the current connection/request is using HTTPS.
The shortest, simplest answer to your question is to try. If you can hit https://localhost/ then, yes, Apache is listening and responding to HTTPS requests. If it doesn't respond then it isn't.
Or dig through the configuration files, but I'm guessing if you knew how to do that, you wouldn't be asking the question.

IE11 doesn't accept format of domainname\username when authentication through ADFS

I am using IE11 , when I log on to Office365 through ADFS , the login page only accepts userprincipalname format . It doesn't accept domain\username format , if use domain\username , password will prompt again and again .
However , the issue is not happening on Firefox or Chrome on same computer , and also , the issue is not happening on a different computer which has same IE version .
could anyone please help me on this ? Thanks in advance

Hi,
Since this just happens on a single computer, I suggest to reset the Internet Explorer,by resetting Internet Explorer settings, you return it to the state it was in when it was first installed on your computer. This is useful for troubleshooting problems
that might be caused by settings that were changed after installation,
reset Internet Explorer in this way:
a. Close all Internet Explorer and Explorer windows that are currently open.
b. Start Internet Explorer.
c. On the Tools menu, tap or click Internet options. If you don't see the Tools menu, press Alt.
d. In the Internet Options window, tap or click the Advanced tab.
e. Tap or click Reset
Details can be found at:
http://support.microsoft.com/kb/923737
Regards
Wade Liu
TechNet Community Support

HT2731 Why itunes doesn't accept my payment card

Why itunes doesn't accept my mastercard when i sign in with this Apple Id in iTunes Store in windows 8 , i have two mastercards of two different banks in India.
iTunes says - " The payment card number you entered is not a valid payment card number"
Currently i have Debit Master cards of banks
1. State Bank Of India
2. Punjab national Bank
Please help me to create my apple id with iTunes store

If you are trying to use debit cards then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined. Do you have a credit card that you could use instead ? Credit cards are generally considered safer than debit cards.
If you only have debit cards then you can try contacting iTunes support and see if they can help, but I don't think that you will be able to use them : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

My downloads-window doesn't function properly anymore, often it just stays blank, and the one in my taskbar doesn't turn green at all. Can you tell me how to fi

My downloads-window doesn't function properly anymore. It just stays white whenever I am downloading something. Only after downloading the same file once or twice more, it shows the progress of my download. The window in the taskbar -that should progressively turn green- doesn't show anything at all anymore. How can I fix this?

Note that there should only be a prefs.js file (Windows hides the .js file extension) and not a numbered prefs-##.js file. 
The presence of a numbered file indicates there there has been a problem with creating/updating prefs.js at some time and you can remove the numbered prefs-1.js file. 
If the main prefs.js doesn't have a current time stamp then you will have to delete that file as well and redo all customization settings in Options.
Make sure that you do not run Firefox in (permanent) Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy: Use custom settings for history
*Deselect: [ ] "Always use private browsing mode"
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode

Ovi maps doesn't accept my Nokia account user name...

It was necessary to do an *#7370# reset on my phone, every things is fine now, except the point that I can't log on to Ovi from the maps application to get my maps favourites back to the phone.
Maps doesn't accepts my user name anymore. I got an error massage "no special characters allowed", but I have dots in my user name.
I don’t have any problems with logging on to other Ovi services either they are PC based nor from my mobile.
Creating a new account doesn't bring me back my maps favourites, therefore it's no solution for my problem.
I tried to install an older maps version, but have sis files for version 3.03 and 3.04 only and both versions doesn’t allow my to log in to Ovi.
Does anybody has an idea what to do?
Thanks for help in advance!

farby wrote:
Why don't you contact Nokia using the 'CONTACT US' tab at the top ??
Have tried e-mailing support @ Ovi reply was "go to accounts>Nokia account>sign in" which is what I'd explained wasn't working. Called the Nokia help line & told to delete maps & reinstall which is what I'd tried previously, tried again but still doesn't work.
Navigation actually works with data download but still doesn't log in to enable sync. I still suspect it's something to do with a setting in the active sync profile.
So I'm waiting for 1. Ovi help to reply to second e-mail and 2. the call centre to reopen Monday

WRT120N: QOS doesn't accept my phone's MAC address

My Linksys WRT120N router doesn't accept my cellphone's MAC address... I wonder why.
Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".
I wonder why.

KenWeiLL wrote:
My Linksys WRT120N router doesn't accept my cellphone's MAC address... I wonder why.
Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".
I wonder why.
http://forum1.netgear.com/showthread.php?t=51629
Looks like this issue is not exclusive to only Linksys firmware...
This looks like it could be an interesting if not risky workaround fix example used for netgear routers: http://forums.overclockers.com.au/showthread.php?t=856799
BTW: I don't have any issue assigning non-standard 00 beginning mac address on my linksys routers running open source firmware!
Member of the Professional Aviation Safety Specialists Union!

HT3702 Hi there, can somebody help me in showing me how to reset my credit card information on iTunes Store as I have the credit card and it seems like the system doesn't accept my new card.

Good day, can someone show how to update a new credit card on iTunes Store as I have changed my credit card. It seems like the system doesn't accept the new infos but when investigated with apple store staff members, they said I had a previous purchase to complete for the payment in order to update my new infos. Does Apple have authorization credit card form? So that I can authorize them to finalize the previous purchase payment with a new card.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
You may want to try gift cards as an alternative.

SPA901 doesn't accept HTTP anymore, only ping

Similar Messages

Maybe you are looking for