Space appearing in name of just one font family member

Hi, I have a problem with InDesign CS4 adding a space in the name of just one particular style of a font family.
This is happening with a company's custom-produced corporate typeface. It has a Font Suitcase file (named "XY Com") and four corresponding Type-1 PostScript files (named "XYCom", "XYComBol", "XYComIta" and "XYComBolIta") for the Regular, Bold, Italic and BoldItalic styles.
For the Regular version, InDesign CS4 lists the name as "XY Com", but for other styles it lists the family as "XYCom" (i.e. without a space in the name).
So as well as the family is not getting grouped properly in the various menus, ID also gives an error message about the 'missing' font when opening files created in ID2.0 which use the correct (?) name.
The problem just seems to be happening in ID CS4 (and IIRC in ID CS3, which I had installed briefly). In InDesign 2.0, the font family shows up correctly grouped, as likewise in Font Book, Linotype FontExplorer X, the standard OS X font selection dialog, etc.
Any ideas?
Cheers,
Stewart.
ID CS4 v6.0, OS X v10.5.5.

Eric, thanks for the suggestions. I have tried deleting those files and clearing the font caches but the problem persists.
I have noticed that a different font with a Suitcase/PostScript file combination does not have the problem - but this font is different in that it has a Suitcase file for each PostScript font file, rather than one Suitcase file for several PostScript font file.
So, it looks like when there is a font family with a Suitcase file referencing multiple PostScript files, InDesign is using the long font name for one style (always the Normal/Regular style?) and the short font name for the others.
I wonder whether this is just happening on my own system or whether it is a general problem. Does anybody want to check?
Some example fonts that exhibit the problem are the Image Club Graphics fonts on the Adobe Action Pack Graphics CD that came with PageMaker a few years ago, if anybody has that lying around.
Cheers,
Stewhttp://www.adobeforums.com/Images/m/pstmsg.gifart.

Similar Messages

How to remove thousands of file called with the same name with just one number most of the other

I've created this thousands of file with a python script, and i've tried to delete all of them using another python script which uses while command and it does work but it's really too slow and my finder crashes. I can't delete all of them manually because it would take forever and from the terminal i don't know how to delete them. The files haven't got an extension and are in my user directory, so please if somebody knows something to do tell me. (sorry for my english)

Yes there is a way. Post back with the following information:
1. With respect to your home directory, what is the exact folder that the files are in (ie, are they in the Documents folder, or in a subfolder within the Documents folder). What are the exact names (caps included) of these directories?
2. What is the exact name scheme of the files? You mentioned they are incremented numerically, but what are the rest of the files' names (again, capitalization is important)?
With this information, there are several ways to approach the problem, which will basically be four steps to ensure you do not inadvertently remove files you wish to keep:
1. Create a new folder to temporarily house the files.
2. Issue a command to target the files by name and move them into a separate folder.
3. Check the old parent folder to ensure nothing is missing, and optionally check the names of the moved items.
4. Finally delete the contents of the temporary folder, along with the folder itself.
The specifics of these steps will depend on the names of the files and the folder that they are in, so provide as much information as you can about that, and we can work through the steps.

Have new iPad giving old one to family member

Hi can anyone take me through the steps needed to get this sorted. Want to keep photos on old one then register new one to my account and other to a new account
Will old one keep all apps and other things?
Will new one loaf all old stuff
Please help

You won't be able to do exactly what you want. At least not directly
Read through this about wiping/moving stuff off your iPad and getting ti ready for resell/handing down
http://support.apple.com/kb/HT5661
The only way to keep the photos would be to upload them somewhere and then redownload them once you set the iPad up for the new owner.
Apps aren't tied to a device. they're tied to the Apple ID, so when you set it up for the new owner and they put their ID on there, they'll have to start over with their apps.

How to overload two different procedure with just one name in to package

i have created two procedure avg1 and avg2.avg1 calculate average of total salary based on e_id and avg2 calculate average based on j_id.now i want to create a package with specification and body where i want to use just one name -avg- for two different procedure.

You can overload the same name for procedure as long as their formal parameters differ in number, order, or datatype family.
Read more about overloading in documentation

How to change font in just one column of JTable

I have a table with 4 column.
I want to have Courier font in column number 2, and Arial in columns number 1, 3 and 4.
With:
table.setFont(new Font("Courier New", Font.PLAIN, 12));
I can set fonts in all columns but how to set font in just one column.
Thanks
Srdan

Hi,
there are 2 methods of JTable where every rendering resp. editing component "comes" through - prepareRenderer(...) and prepareEditor(....) - by overwriting this methods and calling its super method first you get the component and can manipulate it before you return it. This component is exactly that, what is used for rendering resp. editing afterwards.
greetings Marsian

How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

How do I send pictures from iphoto to a group via email instead of to just one individual? I can't type in more than one name or send the pictures to a group.

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

The icon of faceTime doesn't appear in the dock just space for it

The icon of faceTime doesn't appear in the dock just space for it and i can turn on the faceTime when I click to the space

If the above doesn't work, try a reset.
1. Hold the Sleep and Home button down (together)
2. For about 10 seconds
3. Until you see the Apple logo (very important)
4. Ignore the red slider

In PSE 10 Organizer I cannot download the entire thing - just one photo appears

When I try to access the Organizer in PSE 10 I get only one photo. What am I doing incorrectly?

On Tue, 12 Jun 2012 19:36:04 -0600 photodrawken <[email protected]>
writes:
Re: In PSE 10 Organizer I cannot download the entire thing - just one
photo appears
created by photodrawken in Photoshop Elements - View the full discussion
Operating system?
Are you using Display...Thumbnail view?
Ken
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4487753#4487753
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4487753#4487753. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

How can I increase the font size of just one paragraph?

I am using Dreamweaver CS4. I want to increase the font size and style of just one paragraph, but the "page properties" changes the font size for the whole page. In this regard: how can I increase the font size (and style) for just one word. Thank you, Mr. Monroe

Nancy O.
How do I get to “CSS Properties”? Do I click on Window > CSS Styles?
When I click on Window > CSS Styles, I do not see the text “Custom Class.”
I tried inserting (manually) the HTML code you suggested for the paragraph I want to change and nothing happened. I tried [<span class=”16px”>text came in here</span)]
I read in a tutorial that after you create a CSS style sheet, all you have to do is select the text you want to apply it to and then attach the style sheet to that text. I can imagine, however, that there are some special steps that one has to perform in order to do this.
Thanks for your help.
Mr. Monroe

HT203167 Some of my Itunes playlists have been deleted but not all of them. I never deleted them myself, just one day they didn't appear in my playlist section. How do I recover these playlists?

So recenlty I went to my Itunes library and realized a number of my playlists have been deleted but not all of them. I never deleted them myself just one day they weren't there? How do I recover these?

Do you have a backup you could restore them from?

Dual Core, but just one recognized [SOLVED]

In the last days I had problems with my computer just going off randomly after some time... As I found out the CPU fan was too loose... Now I somehow fastened it so it seems to work normally now.
Today I noticed (I'm not sure whether it's now the first time or I just didn't see it) that on booting I see just one Arch logo, although I have a Dual Core processor and normally there are 2 logos... I checked whether GRUB has the option nosmp set which was not the case. cat /proc/cpuinfo gave me just one core.. Then I tried to boot the arch live cd (the 2008.06) and cpuinfo had both there!
The BIOS says that there are still 2 as well... so my first idea, that one core is broken because of overheating seems to be wrong, it's impossible that just one core breaks, doesn't it?
So my question is - how do I get my core to be recognized again? I have the new 2.6.29 kernel.. could this be the problem?
My second question is - the information about launching daemons on booting appears AFTER showing the login prompt (I login via tty) [EDIT: This had to do with the OpenNTPD daemon...]
Last edited by icetonic (2009-04-16 15:46:27)

Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x7ffc0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffc0000 (usable)
modified: 000000007ffc0000 - 000000007ffce000 (ACPI data)
modified: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
modified: 000000007fff0000 - 0000000080000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff24000 - 7ffafb9e
Allocated new RAMDISK: 00011000 - 0009cb9e
Move RAMDISK from 000000007ff24000 - 000000007ffafb9d to 00011000 - 0009cb9d
ACPI: RSDP 000FB800, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFC0100, 0054 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP 9000706 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FFC05C0, 659A (r1 A0904 A0904000 0 INTL 20051117)
ACPI: FACS 7FFCE000, 0040
ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG 9000706 MSFT 97)
ACPI: SLIC 7FFC0440, 0176 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM 9000706 MSFT 97)
ACPI: HPET 7FFC6B60, 0038 (r1 A_M_I_ OEMHPET0 9000706 MSFT 97)
ACPI: SSDT 7FFC6BA0, 0206 (r1 A_M_I_ POWERNOW 1 AMD 1)
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 005ac000 - 005b2f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a8584] TEXT DATA BSS ==> [0000100000 - 00005a8584]
#4 [00005a9000 - 00005ac000] INIT_PG_TABLE ==> [00005a9000 - 00005ac000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 000009cb9e] NEW RAMDISK ==> [0000011000 - 000009cb9e]
#8 [00005ac000 - 00005b3000] BOOTMAP ==> [00005ac000 - 00005b3000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc0
On node 0 totalpages: 524111
free_area_init_node: node 0, pgdat c0431600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294578 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015
Kernel command line: root=/dev/disk/by-uuid/206cc51d-0ece-4693-a6cc-156428ba637f resume=/dev/sda5 ro vga=792 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2109.362 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073012k/2096896k available (2369k kernel code, 22620k reserved, 1056k data, 356k init, 1187592k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc045f000 - 0xc04b8000 ( 356 kB)
.data : 0xc03507cf - 0xc0458a88 (1056 kB)
.text : 0xc0100000 - 0xc03507cf (2369 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4220.50 BogoMIPS (lpj=7031206)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
ACPI Error (dswload-0239): Invalid type (Alias) for target of Scope operator [\._P] (Cannot override) [20081204]
ACPI Exception (psloop-0227): AE_AML_OPERAND_TYPE, During name lookup/catalog [20081204]
ACPI: setting ELCR to 0200 (from 8c00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4220.50 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff8000-0xdbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xdbffd000-0xdbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdbffc000-0xdbffcfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 08, should be 03 [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0xa30-0xa37 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f could not be reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x2000-0x207f has been reserved
system 00:06: ioport range 0x2080-0x20ff has been reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb80000-0xffffffff has been reserved
system 00:06: iomem range 0xff300000-0xff3fffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0x230-0x23f has been reserved
system 00:0b: ioport range 0x290-0x29f has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: ioport range 0xa10-0xa1f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xe000-0xefff
pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0x0-0x0]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 558k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1239902785.206:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 16 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 17 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 18 for MSI/MSI-X
vesafb: framebuffer at 0xdd000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b470
vesafb: pmi: set display start = c00cb4d3, set palette = c00cb52e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 356k freed
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: PHILIPS SPD6005T, P1.0, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PHILIPS SPD6005T P1.0 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 15
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 15
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
loop: module loaded
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rt73usb
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
IT8712 SuperIO detected.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdbffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdbfff000
Driver 'sr' needs updating - please use bus_type methods
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:07.0: setting latency timer to 64
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.103
usb 1-4: new high speed USB device using ehci_hcd and address 2
input: PC Speaker as /devices/platform/pcspkr/input/input4
lp0: using parport0 (interrupt-driven).
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1b:fc:fc:c3:29
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
usb 1-5: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
Error: Driver 'pcspkr' is already registered, aborting...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
HDA Intel 0000:00:05.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64<6>wlan0 (rt73usb): not using net_device_ops yet
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usb 1-4.3: new high speed USB device using ehci_hcd and address 5
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
usb 1-4.3: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device USB Video Camera (0471:0334)
input: USB Video Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.3/1-4.3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
EXT3 FS on sda7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3919820k swap on /dev/sda5. Priority:-1 extents:1 across:3919820k
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg4 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
rt73usb 1-4.1:1.0: firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:14:7f:83:b1:bb
wlan0: authenticated
wlan0: associate with AP 00:14:7f:83:b1:bb
wlan0: RX AssocResp from 00:14:7f:83:b1:bb (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
IRQ 11/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs

Identifying Full Font Family Names from Acrobat "Properties"

I routinely update PDFs where the originator is unavailable to question about typography issues. The problem I'm having currently, and continue to have, is that Acrobat (on V8) identifies font names differently from say...the Adobe Store.
For instance, currently I'm editing a PDF that uses fonts from the "HelveticaNeue" family. I don't have this font, so if I go over to the Adobe store and try to find it, I get multiple types of "HelveticaNeue" font, and none of them are exactly what Acrobat provides as the name.
For instance:
Acrobat says: HelveticaNeue-Black
Adobe store offers:
Helvetica Neue Std Black
Helvetica Neue 93 Black
Helvetica Neue 95 Black
and so on and so forth
But NO "HelveticaNeue-Black" is in the list.
Neither the spelling of the Acrobat font family, or the actual full name seem to match anything in the Adobe store.
So, does anyone know a way to figure out exactly which font family Acrobat has in the PDF?
Thanks in advance.

Chris Souther asked:
"Does anyone know a way to figure out exactly which font family
Acrobat has in the PDF?"
PDF's may include individual fonts, not families. For the most part,
the font names shown are the actual font names. Or, more precisely,
the PS Font Names.
I'm looking at an older Type 1 font right now that has the following
names in its name table (or at least the ones I can see in FontLab):
Family Name: Helvetica Neue
Weight: Black
Style Name: Regular
PS Font Name: HelveticaNeue-Black
Full Name: Helvetica 95 Black
Menu Name: Helvetica 95
Fond Name: Helvetica 95
To prevent conflicts, Adobe did some name modification when they
created OpenType versions of fonts:
The OTF version of the same font shows:
Family Name: Helvetica 95 Black
Weight: Heavy
Style Name: Regular
PS Font Name: HelveticaNeue-Black
Full Name: Helvetica Neue 95 Black
Menu Name: Helvetica 95 Black
Fond Name: Helvetica 95 Black
It appears that either one of these might be the one used in your PDF
- and they should be interchangeable.
Just to confuse things further, the fontnames for embedded subsets may
be preceded by random 6-letter-and-a-plus-sign strings like HFTRDS+,
or in some cases where the PDF isn't produced by Adobe Acrobat,
TrueType fonts might have peculiar names like TT493875.
Note that with the exception of a small "webfonts' collection Adobe
has never produced Truetype fonts. If, as you indicated in another
gorup, you need to install these fonts, you need them in T1 or OpenType.
- Herb

Terminal problem-weird appearance before name

When I open Terminal "n014h151" appears before my name
I never seen tihs before, usually its just Andrew$ or something simular.
I've been trying to use this comand sudo rm -rf ~/.Trash to empty my trash as i have a file in there about 78GB its my iphoto library and its taking forever to delete. i'm not having much luck. I'm wondering if something is wrong with my computer to have that weird combination of letters and numbers show up before the name.
Any suggestions and ideas would be apprecated

The default prompt is
hostname:current_working_directory username$
where typically what you initially see for current_working_directory is a tilda ~ which is Unix shorthand for your home directory.
The thing that confuses most home users is that the bash shell takes the current IP address, does a reverse DNS lookup to get the name associated with that address, and plugs that into the hostname field of the prompt.
This gives the expected results when there is no outside your Mac DNS name associated with your IP address, as the Mac DNS lookup code will then substitute the System Preferences -> Sharing -> Computer name.
However, every once in a while, the reverse DNS lookup returns a value, and you get some very strange results for hostname.
While confusing, sometimes annoying, it is harmless.
With respect to deleteng files from the trash, if you have a lot of file it can take awhile to delete each file. If the space used by those files is a lot (and 78GB is a lot) AND you specified "Secure Erase" it can take a very long time to erase the contents of each file, before freeing the storage.
But having your hostname say n014h151 is harmless.
If you do not use Terminal all that much, just ignore it. If you use Terminal enough that this kind of uncertanty bothers you, then you can tell 'bash' to use the prompt you want.
Try creating, or modify .bash_profile and adding:
PS1='$(networksetup -getcomputername):\W \u\$ '
NOTE; the bash shell uses just one of the following, looking for them in the following order
.bash_profile
.bash_login
.profile
If and only if one of these files exist. You would choose to put the PS1 promot into the one that exists, or create a .bash_profile if non-of them exist.

HT3819 How do I share just one movie (not my entire library) from my itunes library with an authorized computer using home sharing?

How do I share just one movie (not my entire library) from my itunes library with an authorized computer using home sharing?

many thanks.
That should be possible.
From his library connect to your library via Home Sharing.
Select the name of the shared library in the source pane of your itunes, and click on the wee disclosure triangle to the left of the name of the library. Does "Films" appear beneath the name of the library?
Here's a screenshot of what I mean.
Select "Films". In the right-hand pane you should see the item you want to transfer. Just select that item, and click "Import".
Use the same basic technique to get one or a few songs from your library transferred to his library. (The only difference is that you would have "Music" selected instead of "Films".
If you don't want him to have access to other items in your library, you could just switch Home Sharing off on his library after you've done the transfers.

Mplayer can't play files with spaces in their name

After scratching my head and reinstalling codecs several times without luck, and old memory resurfaced of this occuring before and I managed to solve the problem.
The thing is that if you doubleclick a file in Nautilus, and said files has spaces in its name, mplayer won't be able to play it, and gives a very cryptic error message, ie "cannot play file a%20b.avi" if the name of the file is "a b.avi".
The trick is mentioned in this thread -- you edit /usr/share/applications/mplayer.desktop and change 'Exec=gmplayer %U' to 'Exec=gmplayer %F'.
The bug has been around forever, and hasn't been fixed yet. Perhaps the mplayer devs don't want to fix it. In any case, I would propose that either we fix this in the mplayer Arch package, or that someone more knowledgeable than I get in touch with the devs about it.
Just a suggestion, but I think it's kind of important. It's really confusing to new users.

In my opinion, it it's not arch's job to fix bugs from upstream, no matter if it's mplayer or gnome's fault. Of course there are exceptions, eg if a bug in a critical package hardlocks the whole system, or adds a huge security risk.
I would like to belive that the general arch user is smart enough to find one of the 30 threads about this bug (or the entry on the bugtracker) and fix it themselves. Personaly I would put this in the same category as packages that don't have a .desktop file at all from upstream.
Oh, and as a small sidenote: http://phraktured.net/patching-patching-patching.html

Space appearing in name of just one font family member

Similar Messages

Maybe you are looking for