Space around Table in Numbers

I'm new to Numbers and need to print a table I have devised. But there is too much space around it. When I enlarge the columns and rows, it splits into 2 pages. How do I get rid of the large gaps around the sides?

wa,
The gaps around the sides are margins. The sizes of the margins are set in the Sheet Inspector. There are minimum margins, based upon what your printer driver has communicated to Numbers, where your printer is unable to print.
Your table will split and flow onto multiple pages whenever it encroaches upon the margins. You can prevent this by not making the rows and columns quite so large, and by eliminating any unneeded ones.
Jerry

Similar Messages

  • Unnecessary space around table in an iview

    Dear all,
    Ive a simple model with only one table.
    After I compile the model and It is shown in a iView, the table is not centered inside the iView, instead, an unnecessary space is around the table (Right side and bottom), I mean, between the table and the limit of the iView there is a blank space which constrain the table to be at the center of the iView.
    Any help would be ok!
    Thanks in advance.
    Cheers,
    Andres.

    wa,
    The gaps around the sides are margins. The sizes of the margins are set in the Sheet Inspector. There are minimum margins, based upon what your printer driver has communicated to Numbers, where your printer is unable to print.
    Your table will split and flow onto multiple pages whenever it encroaches upon the margins. You can prevent this by not making the rows and columns quite so large, and by eliminating any unneeded ones.
    Jerry

  • Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box  at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

    I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
    If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

    The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
    When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
    But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
    For the example, the values list for the pop-up menu was:
    5
    3
    1
    Choose
    -1
    -3
    -5
    The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
    For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
    Regards,
    Barry

  • Removing White Space Around Header - from CSS?

    What is causing the white space around the header and
    above/below the top nav bar? There's also an extra white pixel
    space between each of the buttons on the top nav bar.
    See;
    http://home.roadrunner.com/~phenline/products/prods_models_9_10_07.html
    I've also attached the CSS stylesheet.
    I thought it might be a valign tag but they are all in the
    main text and are necessary to glue the 3 main sections just under
    the top nav bar. I couldn't find any vspace or hspace options in
    the code.
    Because of the rollovers on the top blue horizontal nav bar,
    I need the "class" option in each <td> tag. Otherwise, if I
    put the class="navMain" option on the <tr> tag, then the
    whole nav bar will show the rollover color. Or, I suppose I could
    create 5 different CSS styles for each nav button ???
    Any ideas? Thank you.

    HI, for first you should to revrite tables to DIV, or you can
    correct this with a CSS code for the table:
    for example you shold to check the background color to the
    same:
    .x {
    background-color: #3766c8;
    for more example about Table CSS styling you can check a good
    wizard:
    http://www.somacon.com/p141.php
    Titti
    http://textures.z7server.com/

  • Spry Image Slideshow w/Filmstrip - Eliminating space around SS images?

    Hello,
    I can not locate the file/setting to eliminate all the space around the Slideshow images?  In Design/Code view, the SS appears nicely positioned in the table, however when I publish the page, I've got a ton of wasted space below the SS?
    How do I get the lower half of my page closer to the bottom of the SS?
    Thanks in advance!
    http://www.kansascitycrates.com/contact.html

    Update:  I was able to eliminate space below the SS by deleting the entire table and starting over.

  • I cannot add form to table in Numbers

    I have a table in Numbers (iOS 8.1.2, iPhone 6 Plus) that I'm unable to add a form for. It has a header row designated (one header row). What would cause something like this?

    Yes thanks. I had all of those requirements. I ended up deleting the table and re-adding. I think the issue was I was pasting in values from Excel (on OS X Yosemite) into the Numbers app on Yosemite, then accessing on my iPhone. Basically I think I just really confused Numbers on iOS. It's working fine now.

  • How do I paste a table from Numbers or Excel into Ibook Author exactly as the original?

    I am new to iMac and Ibook Author.
    I am writing a statistical paper in Ibooks Author.
    I have Chapter heading, now section heading and body.  I want to paste a table from numbers or excel into my iBook as this has the results of my analysis.
    As part of my analysis, I want to copy a 5 column table with 633 rows, which is essentially my table of data.  I have the table in numbers and excel.
    When I copy the table in numbers or excel, followed by pasting (CmD V) into iBooks, I get the first 20 rows in a table format and the remainder of the table is missing.  The table appears to end at the end of the page.
    I can not figure out how to paste the entire data as my table.
    Its holding me back...
    Any ideas?

    Hello Loquitir,
    I am not fully sure if I understand but I gather since there are so many rows only a certain amount fits on a single page.
    How many rows does actually fit on a page in iBooks Author?
    There is a method that would look pretty cool that is used to create a double page spread that would look great but instead of having a double page you could maybe have three or four pages.
    Here is a quick idea that I stuck together, additionally when you are copying and pasting form Numbers to iBooks Author just select the cells that you want.
    Copy and paste within iBooks Author and then go back and get the next row of the table that you want.
    I hope I am clear in what I am describing.
    Regards,
    Nigel

  • Listview for new sheets and tables in numbers 3.0

    Hi there,
    when adding a new sheet or table in numbers 3.0 you get them in a horizontal bar under the symbol-bar.
    If you need severals sheets it directly get confusing.
    In numbers 09 numbers used to add new sheets in a list view on the left side of the window. And the tables
    subordered to each sheet. Is there a possibility to change this view in numbers 3.0 to the same view
    as used in numbers 9.0?
    If not I will directly change again to 9.0 and hope the apple starts beeing again the big company they
    used to be a couple of years ago. They start sucking!

    Hi Yellowbox,
    I apreciate your answer.
    I already switched back to 9.0! To have the sheets and their subtables on left site in listview matches my business scenario. For making calculations for severals companies working on the same project, it is more comfortable to have one sheet per company and for each related service an exra table. For me it wouldn't be clear anymore while using 3.0.
    Thanks again for your effort.
    My big question is, way want somebody forcing you to do something like they think it should be!?
    The machines are very powerful. So please let us work / use the tools as we feel the best.
    The strategy to force someboy to used in a special manner, used to be typically for Microsoft.
    This is one good reason why a lot of people switched to Apple!     THINK DIFFERENT!!!! and not
    THINK LIKE US!!!
    Please rethink companies politics.
    What is the matter of having Icloud if I only can load special material, with only certain special software releases?
    What is the matter of having Fotostream if i am forced to delete a picture from every of my devices wich costs a lot of time! Where ist the option, delete from this advice or completey from icloud?
    What is the matter of having such expensive products like Ipads/Iphones/... if I need special apps which aren't at all comfortable to load unload single fotos / ...
    What is the benefit of having time machine if it only works with special hardware? I have a perfectly running 12TB BackupSystem/NAS and can't us it!
    Why should I spent so much many to have the best computer equipment if I can't use it like i need it?
    And please from release to release the system is more and more bothering and interacting with the user... this is one of the reason why Microsoft products are so horrible. When I am sitting on my computer I want WORK and not getting one alert, warning, interaction behind the other. I want work! I want to be effective! So please, give up from this method of interacting with the user.
    Why has Iphoto to be so aggressive? I dont want to put pictures in events. And neither and predifend events respecting the time stamp! I just want to have a file watcher which keeps up to date a tree (with the manipulating options of Iphoto) of a certain folder structure. NOTHING ELSE!
    APPLE = GOOD PRODUCTS, BUT ALMOST NOT USABLE
    Maybe I should switch again to SuSe Linux ;-)

  • Space around text in a box

    I am following the instructions regarding margins but whilst having lots of space on the right it remains very tight on the left. It's supposed to make the same amount of space all around the text??
    Any ideas?

    In the text inspector insert a margin last tick in the window after the paragraph adjustments.
    Even if you don't use bullets you can also do some adjusment under that tab as far as space around text in the window.
    As much as possible control your text with the sliders space before paragraph space after line spacing rather than extra characters as it is a much cleaner formating and when you make changes you won't have to remove any of those extras.
    I was a print designer in another life, but text formating is text formating no matter where it is.
    Mireille

  • Template with php script, white space around background, locking layers

    two questions for 2 sites:
    1.) first site http://www.beckervanhoveln.com
    I can't get my background to line up correctly; there is a giant white border around the whole thing. With the amount of extra space around the background on all sides, I think it may be an issue with the illustrator file I am importing, but I can't see any way to fix it there, either. All the margins that I can find to change relating to that background are set to 0. Any ideas on what could be causing this? The image in Illustrator is 14" wide, so it's plenty wide enough to cover the whole page.
    2.) site http://sai.theclothesgallery.com
    I inserted php scripts into a page (in the editable paragraph region) and it is messing up the alignment of the page. Compare what you get on the home page with what you get when you click the "client login" button. Also, wondering where the extra body area came from on page http://sai.theclothesgallery.com/protected_downloads_zdr/validuser.php.
    On both sites I am using wrapper and body tags, as directed in the tutorial by Nate (great one, thanks!). On my old site, http://www.theclothesgallery.com, everything works fine, but on the new ones I am just out of my mind. I've spent 10 hours over the last 2 days doing research and trying to manipulate code, to no avail. Thanks to anyone who can help.
    Finally, is there a way to lock a layer inside or on top of another layer. for example, the layer the body text is in on site http://sai.theclothesgallery.com is on top of the layer that holds the page's images (which is an imported illustrator file with slices). Is there a way to lock that layer to the first one so it doesn't move if I make changes?

    Kelly,
    1. The image itself has a white border. You will need to crop that image
    in an image editor such as Photoshop.
    2. Looking at the source of the page you have two  sections and
    two opening  toags but only one closingtag. The PHP
    script is probably creating the additional sections, but without seeing
    the script it is impossible to say for certain.
    2a. You probably have a space or blank line before the opening

  • How can I copy tables from Numbers to Pages without formula?

    hi everyone
    i need help
    How can I copy tables from Numbers to Pages without formula in the cells?

    Ok... I see your problem... when pasting into Pages, the formulas from Numbers are included. Perhaps this is really more of a Pages question (in which case I'm far from expert). A couple of ideas:
    • In Pages, try "Edit"/"Paste and Match Style", which may insert tab delimited cell values (no formulas). Then, if you want the table format back, select these newly pasted tabbed values and use Page's "Format"/"Table"/"Convert Text to Table"/
    • In Numbers, before copying, make a temporary table of the plain values first, then copy and paste that into Pages. To do this, select the range of cells you desire in the Numbers and "Edit"/"Copy". Then "Edit"/"Deselect All" and "Edit"/"Paste Values" and "Edit"/"Cut". Now just a table of values is on the clipboard and you can head over to Pages to paste.

  • How to modify default Space Around Component in NetBeans 6.0?

    Hi,
    Does anybody know how to modify the default Space Around Component in NetBeans 6.0? I use Panel and either they stick completely to the border or stand too far. I can't find any options to modify this in NetBeans 6.0. I have tried using the 'Space Around Component...' functionality, but as soon as I move an element, NetBeans automatically replaces the values I have entered with default values I am not interested in.
    Does anyone have the solution?
    Thanks!

    I think you just have to move the component holding the alt key... that way you can put the components wherever you want to..... it was alt, or shift, or another special key, try it... i don�t remember right now

  • QR code occupying more space around the barcode

    Hi,
    I am creating a new form with 7 barcodes of type Paper forms Barcode(QR code). I have two problem in this...
    1) I am giving the same width and height for all the barcodes. But in the final output the size differes for all. two are of one size, other two are of other size and other 3 are of different size.
    2) And for the QR code it is taking more space around the barcode where the form is looking odd with more empty space?
    So, How to make all the barcodes of same size?

    Hi All,
    Frequently we are facing the issue with memory dump files which will creating space issue on the drive...
    Each dump file occupying around 100 or 200 MB and it will creating every 1 mint..
    please let us know how to resolve the issue.
    Thanks,
    Subbu
    Thanks, Subbu
    Hello,
    As per me memory dumps are generated when fatal error occurs.
    How to avoid it ? See below
    1. Please apply latest Service pack as well as cumulative update .If you still receive this dumps please open a case with Microsoft and allow them to analyze the dumps
    2. Generally a SQL server not patched to latest SP or CU can cause this issue.
    Hope this helps
    Out of curiosity..can you post one of the dumps ,what is output of below query
    select @@version
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Delete extra spaces in table column

    hi how can i delete extra spaces in table column for example if table column value is store as 'ÄAAAAA ' how can i delete that extra space
    this is the column i what to delete extra spaces
    select SUBTYPES  from tablesubtype;am in
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    PL/SQL Release 11.2.0.3.0 - Production
    CORE 11.2.0.3.0 Production
    TNS for Solaris: Version 11.2.0.3.0 - Production
    NLSRTL Version 11.2.0.3.0 - Production
    Edited by: adf0994 on 2012/12/03 11:30 AM
    Edited by: adf0994 on 2012/12/03 11:42 AM

    UPDATE tablesubtype
       SET SUBTYPES  = TRIM (SUBTYPES);Doing RTRIM alone will not suffice coz it'll only remove Right Spaces and NOT Left ones.
    I guess, in your case doing a TRIM will be more beneficial to be safe and prevent any left spaces in future.
    For intermediate spaces... try this.
    UPDATE tablesubtype
       SET SUBTYPES  = REGEXP_REPLACE (SUBTYPES, ' ', '');Hope this Helps,
    Ranit B.
    Edited by: ranit B on Dec 3, 2012 2:33 PM
    -- added regexp

  • Working with two or more tables in Numbers

    Working with two or more tables in Numbers
    It is possible to write numbers or names in Table 1 B-2, B-3, B-4, B-5, B-6 etc. and automatically copy in Table 2 only B-2, B-4, B-9, B23 etc.
    What do I need to do???
    Thanks for the help

    The table on the left is named "Source" and on the right "Destination":
    In the table "Destination" on the right:
    B2=Source :: B2
    select B2 and fill down

Maybe you are looking for