Space bar is over sensitive

anyone else noticing that they're hitting the space bar a lot more accidentally since the iOS5 update? feels like anytime I get near the bottom row I hit it and accidentally insert a period, just me?

Yes, they changed the keyboard a bit. Most of my accidental keyboard hits come from almost accidentally hitting the Siri icon, so I'm kinda glad its a bit more sensitive.

Similar Messages

  • U410 - base flexes/sensitive space bar, wifi performance

    I've had a U410 for a while now, and seem to have two issues with it:
    1 - the wifi reception seems significantly worse than other devices, prone to awful performance especially further away from my router. I've seen indications that this can be a problem with older modelsm, and mine was manufactured in June.
    2 - the space bar is extremely sensitive, often requiring only a feather  touch to register a press. Not only that, but if I put any pressure on the middle of the base, I can feel it flex slightly and this usually causes the space bar to be activated. As a result, holding the laptop or even putting it on a non-even surface suc h as my lap can be pretty much impossible.

    I had the exact same problem. For me the problem was the user groups. Apparently usergroups is not necessary for most use cases with systemd. And my user was in a lot of groups :-) . So I backed up my /etc/group and removed my username from almost every group.
    Hope it solves your problem!

  • How can I make double clicking the space bar to make a period less sensitive

    Hi! When I double click the space bar, it makes a period, which I love. What drives me crazy is that it thinks I'm double clicking the space bar quite frequently, so it'll insert a period in the middle of the sentence. How can I make my space bar less sensitive? I know that I can turn off the period shortcut, but I would prefer to leave it on, just with a less sensitive keyboard setting. Help!

    It sounds like the space key is getting worn out. You may need to get the device exchanged under warranty if it's less than a year old.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Sensitive space bar

    I get double spaces often and have found that I can cause it to space even when lightly rubbing my finger across the space bar. How might I fix this problem other than have the entire keyboard replaced?

    John:
    Go to Apple Menu > System Preferences > Keyboard and Mouse. Select the Keyboard tab. Check the Key Repeat Rate. Try a lower setting and see how it works.
    Good luck.
    cornelius

  • Mac Book Pro space bar issue...

    I just received my MBP and the space bar is very difficult to engage. This small thing makes typing an extreme test of patience.
    I got it at Future Shop Canada two days ago. Should I call Apple Support or deal with Future Shop? It has taken a while to get here and I need it bad in the coming days. (I am a photography student and it is coming into portfolio time.)

    Hi, Thanks for the reply. The space bar works, I have to press down hard on it for it to input. It seems really bad on the left side of it, to the point where it needs to be pressed firmly. I thought it was a mac thing (being a long time pc user) but my gf is a graphics designer and works on them all day, she said that it wasn't right.
    The space bar doesn't seem to be mounted improperly, it is just not very sensitive. The fact that it has very little sensitivity on the left side as apposed to the right leads me to believe that it isn't just a software problem.
    I hope that explains it. I am going to call apple in the morning. How long do these things usually take? I would hope to get it back fast after blowing $3300 on it.

  • Space Bar not responding during editting

    Under normal circumstances when editting in the timeline, my reporters use the spacebar to play and pause/stop the timeline. There has been some issues of late where the space bar seems to not be working, and requires two or three pushes before it plays or pauses the video in the timeline. The video being rendered does not affect it one way or the other, and it is not constant. It can happen at any time, and often doesn't affect a reporter, or will affect a reporter non-stop (both occured today). For the record, yes I have checked the keyboard and it is not the problem. The spacebar works fine for normal use, its just PPro that has the problem.
    Specs: I have four identical edit bays. Each has a Dual Core 2.5 Ghz Pentium  processor, 3.0 gbs of ram, a single sata drive split into two partitions  (system 30 gb and video 470 gb). I am running up to date PPro 5.0.2,  freshly installed on virgin drives. I have two of the bays with the most up to date 64 bit  manufacturer video and audio drivers, and two bays with Windows 7  automatically installed video and audio drivers. The problem is the same  in all four bays.
    Help?

    Your problem is that your systems are below minimum requirements, with some serious setup faults.
    This is harsh:
    1. A single disk is below minimum requirements. You need at least two physical 7200 RPM SATA disks
    2. Never partition a disk. It will only increase wear and tear and slow down performance.
    3. You likely never tuned your system. Look here: Adobe Forums: Guide for installing and tuning a Vista... This also applies to Win7.
    4. Your dual core CPU is absolutely bare minimum for DV material, but anything more will grind to a halt.
    5. 3 GB RAM is not enough.
    You are in for a serious upgrade of your systems.
    First Harm, I do want to say thank you and that I realize you are trying to help. But, budget is a major issue, and the likelyhood of upgrading soon is non-existant. So what can we do to work within the specs I have? I had not done all of the steps in the tune up, but yes most of them I had, specifically I had not installed Ccleaner, and I had not turned off all of the windows add ons as yet - both will be fixed soon. Our editting needs are pretty minimal to be honest, which is part of why its so frustrating that PPro is being so cantankerous. Cut in and out of five or ten clips, add in a voice over track, and once in a great while a cross fade between two clips or fade out audio (using the pen tool), export to mpeg, and we're done. Our longest package is 4 minutes and that's most of a news block (segment between commercials - we have a 30 minutes news show, so you can imagine most are in the 1:30 to 2 minute range).
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Someone is sure to comment on that.  I wanted to jump in first and say that while the idea of using a single partitioned hard drive isn't a good one, doing so is highly unlikely to be the cause of this particular issue.
    Thanks for the reply. Yeah, I knew about someone would say something eventually, but given that it works most of the time, and only freezes up occasionally, like you I find it unlikely that this is the issue. I'm not saying it won't contribute to it (I know it can). The sad part of all this is I can't get it to replicate the space bar freeze up for me, and while I experience it when I go into the bays for the reporters, I have no idea what they have done up until that point in order to troubleshoot what they are doing wrong. I can and have run an install at the same time as editting video and not had a single slow down whatsoever, while several reporters have issues running PPro and notepad. One is running her yahoo mail in IE, and I think that is one of the problems she runs into (given how resource hoggy IE can be - especially on yahoo's webmail interface), but that's one person, not all of them.

  • Space-bar-is-not-working

    I-just-took-the-bottom-three-rows-off-my-dirty-keyboard,-washed-the-keys-in-soap y-water,-and-cleaned-the-blank-rows-where-the-keys-were,-using-a-cotton-swab-and -soapy-water.-I-rinsed-the-keys-off-and-replaced-them.-All-of-the-keys-work-beau tifully-now,-except-the-space-bar.-It-does-not-work-at-all.-It-feels-all-right-t o-the-touch,-with-the-spring-motion-working-fine.-I-tried-restarting-my-computer ,-and-unplugging-and-replugging-the-keyboard-from-its-USB-port,-with-no-success. -I-also-switched-the-bar-around,-but-that-was-clearly-the-incorrect-position-for -the-bar.-I-also-took-the-bar-out-and-tried-poking-down-the-hole-with-a-pen-tip, -but-that-did-not-make-the-cursor-move-either.
    The-keyboard's-EMC-No.-is-1944,-and-the-Model-No.-is-A1048.

    Walloon,
    I have an A1048 here w/ the spacebar off and it's identical to the A1044.
    I have tried poking at the silicone activator with the end of a pen and with the end of a letter opener,
    So if you feel that silicone dome go all the way down and bottom out and nothing happens then indeed some water must have gotten in there.
    I thought I was being careful when cleaning the base board with a soapy cotton swab,
    Ah hah!
    Here's some pics I took of corrosion on an iBook actuator membrane. The A1048 works exactly the same way:
    http://s291.photobucket.com/albums/ll306/spudnuty/?action=view&current=iBookkeyb oardtracecorrosion.jpg&newest=1
    This was a beer spill as I remember. So see the part I call the "overlay mask" it's thin plastic over another thin plastic sheet that has those conductive traces painted on it. Liquid instantly wicks between the two sheets and takes forever to dry out.
    It is possible to take the entire keyboard apart and repair the damaged trace w/ rear window heater paint but it's a massive pain. Every one of those keys has a tiny silicone dome underneath it and when you take it apart they go flying everywhere. I'm still finding them on the floor of my shop.
    It might just dry out and start working after a few days. Otherwise new/ used keyboard.
    Richard
    Message was edited by: spudnuty

  • Space Bar Issues

    For the last several months I've noticed that my space bar when pressed won't respond unless I almost bang on it. I've tried cleaning under the key, and increading keyboard sensitivity via the system preferences. Does anyone have any other ideas that would help? It drives me crazy to have to double back and put spaces between words when I've done a substantial amount of typing. PLEASE HELP!!!
    Shakira
    P.S. I'm not 100% sure my iBook has Mac OSX (10.4), it may be a little higher or lower. Unfortunately I'm not at my home computer right now to check.

    hi Shakira-
    this could be caused by a software problem. when you get to your computer again find your install disks for the current operating system (make sure it is whatever it says in the system profiler) and run a disk repair. http://docs.info.apple.com/article.html?artnum=106214. if this isn't helpful, then create a new user in system preferences > accounts by clicking the plus sign above the lock. test the keyboard in the new user to see if there is any difference. as well, try resetting the pmu on your ibook. http://docs.info.apple.com/article.html?artnum=14449. [ 8 ) ]

  • Space bar won't type a space

    I have had this problem for a few years, over several versions of Photoshop in several Mac operating systems. Currently I am using CS4 on a Mac 10.6.8. My space bar randomly stops typing a space when I am typing a line of text. I can type every letter except a space. Sometimes the space bar starts working properly if I save the file and start typing again. Sometimes I have to quit Photoshop to make the space bar start working properly. The problem doesn't happen often, but when it shows up it is annoying for awhile. Any thoughts as to where I might look to solve the issue?

    When you post for help, please state which OS X is installed.
    If you aren't sure, click About this Mac from your Apple menu .
    Try restarting your Mac then try the keyboard and mouse.
    If you can't restart from the Apple menu , hold the power button down until the screen turns black. Wait about ten seconds then restart.

  • Space bar scrolling in safari is slow and laggy

    Been searching this for a few days, and while I know some people are having "jaggy" scrolling issues in Safari (caused - or not - by the new Flash install), my experience is slightly different, and appeared at some point over the last week or so.
    In short, it's just a lot slower to scroll via space bar. It used to snap right down to the next part of the page almost instantaneously, but now it sorta "slides" down. Scanning long web pages is a drag.
    Chrome and Firefox still jump instantly to the next page via space bar, so it's a Safari-based issue. Curiously, the two-finger scroll is still fairly instant on Safari, but it's not a natural movement for me.
    Anyone else having this issue, or possible fixes?

    Ok...
    Some users with a similar issue found a solution by uninstalling the Flash plugin, then reinstall new, then repair permissions. See this thread: http://discussions.apple.com/thread.jspa?messageID=11691898&#11691898
    Uninstall Flash
    Install the most recent version of Flash here.
    Now repair permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.

  • Space bar no longer opens folders in finder

    After upgrading to Mavericks, the space bar no longer opens folders...but it SHOULD according to the footnote on this page: http://support.apple.com/kb/PH13872
    This is a problem for me, as I have the "spring-loaded folders and windows" unchecked in the Finder preferences, and I just use the spacebar to open folders.

    I use spring-loaded folders the same way you do (delay off, space bar only), and I'm seeing the same issue on my end.  It would be one thing if the feature just didn't work at all; however, I'm actually seeing four different behaviors depending on the window's view mode.
    Icon view: The window's contents are replaced with the new folder's contents after pressing the space bar once.
    List view:  A new window opens (with zoom animation) to display the folder's contents.  This would be the expected behavior, except that the user has to press the space bar *twice* to activate the feature.  The position of the cursor for the first press does not matter... the folder over which the cursor is hovering when the space bar is pressed a second time is the one that will be opened.
    Column view:  Nothing happens at all when the space bar is pressed, regardless of the number of presses.  This is the most serious problem.
    Cover Flow view:  The behavior is similar to the list view, except that there is no zoom animation when the new window opens.
    This really strips away some polish from the Finder's user experience, and hampers the flow of power users.  I've submitted a Radar bug with my findings, and I hope they address the issue soon.

  • PhotoshopCS6 My history won't update my actions until i until i tap the space bar.

    I recently started using CS6 on my mac and I use a wacom intous. Everytime i make a brush stroke the history won't update, so I can't undo or switch tools unless I hold space bar and move. Anyone else having this issues?

    Hey ead, I had the same problem too, couldn't add songs to my Itouch.
    So I suspected the fact that I smashed up my Ipod pretty good might've done something to the syncing mechanism or something... but either way a quick fix I used was:
    1. Go into "Devices" tab in Itunes
    2. Click the checkbox "Sync with this Ipod over Wifi
    Definitely a temporary fix but w/e it worked for me.

  • Language Input and non working space bar

    Eversince i changed the language input there has been quite a bit of hassle . First my space bar isn't functioning as usual . i think the reason could be the language imput since it started to act weird (ex:When pressing it 14+ times it won't make a space ) . Now theres also a EN symbol above everything . i never had the en thing like that before . How do you get rid of it and have the space bar back to normal .

    Hi ..it means Left Hand Side. The audio comes in as two tracks..left and right (I hate this I might add..it's so messy...zillions of audio and all it does is give me the excuse to mess it all up..which I seem to be doing today). I've managed to split the left and right tracks and now one is short than the other..but I can't drag it out to re-align it with the other track..the handles drag both clips simultaneously
    I am seriously thinking of chucking this program and going back to Premiere Pro...this is just taking too long...been at it all morning and getting nowhere. Even just bring tracks into the timeline..before I was just draggin and dropping ..now it's telling me it'll put other stuff out of synch...jeez..why does it feel the need to shuffle everything else up the timelime. It's as though someone has been on this machine at the weekend and played about with every possible setting to wind me up. (I know that's not true..but that's what it feels like).
    And my spacebar no longer workes..even when I put the playhead on the timeline..I should surely be able to work it from there..I was working it there before. Torture.
    Hope you can help with the audio..otherwise I'm deleting that track and redoind the dips and fades..but that would be torture..plus who's to say it won't happen again..can't keep deleting and starting over..I'll never get finish.
    Carol Ann

  • Why won't words move sometimes with space bar?

    Sometimes I can't get the first word of a sentence to move over with my space bar.  It will move with the Tab button, but I only want to move it a couple of spaces over. 
    Sometimes it will work and sometimes it won't let me.  Anyone have the solution?

    -> Update Firefox to the latest version 10
    * [[Installing Firefox on Windows]]
    Perform the suggestions mentioned in the following articles:
    * [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
    * [[Troubleshooting extensions and themes]]
    Check and tell if its working.
    May not be related to your problem but some of your Firefox Plugins are out-dated
    * Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
    * '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

  • Space bar scratched x61 screen

    not sure if this is a common issue or just my x61 is not properlly assembled.    both ends of my space bar are higher than the rest of the keyboard, and over time they left two white spots on the screen (LCD top layer scratched off), which are quite visible sometimes.
    my X61 is two years old, can i get any LCD replacement for this?   thanks guys.. 

    you could call Lenovo and find out. But i don't think you will get it fixed under warranty in China. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

Maybe you are looking for

  • Attachments in Mails from iPad not conform to RFC2046

    Hello Community, Mails which were sent from iPad / iPhone and have attachments have the following technical structure: Headerfield Content-Type is multipart/alternative; --Apple-Mail-6--139698084 / Content-Type: text/plain;       <Text> --Apple-Mail-

  • How to set user InitialContext in Weblogic ?

    Hi , Below 2 questions : 1). We have an MDB which received an XML message with userId and SiteMinder token. We need to process that message to set the Initial Context in Weblogic.What is the best way to do that ? 2). Since,we have userId in the JMS x

  • Why is my Itunes store blank on my Mac book pro?

    When I open my itunes store it is blank on my mac book pro, how do I fix it. I'm not the best with macs, so please step by step.

  • Need additional right on Windows 7

    Hello NG I'm not sure if this is the correct place to post this question..... sorry about that. I have a windows 7 machine and i want install two bundles. Ghostscript and freepdfxp (http://freepdfxp.de/index.html) The installation of Ghostscript was

  • How can I send a iBook as a gift

    Help I need to gift an iBook and have no clue how to do so!