Space bar not showing safari

I just got a new ipod touch and can not find spacebar in safari. But when I type in google with in safari the spacebar pops up? I do not understand?

The left-hand box in Safari is for the URL - the web site address, and (as far as I know), there are no web site addresses with spaces in them. Therefore the spacebar is not required, but when typing into the search box (the right-hand box with Google in light grey) you do need the spacebar. So it's being clever, only giving you the symbols needed at that time.
Notice that the spacebar (which therefore is not required) is replaced by the dot, the slash and the com, all of which you need when typing in a web site address. This saves you having to change to "numbers" keys for the two most common symbols for web addresses and saves you having to type com every time. (Not much help to us here in the UK )
Are you someone who types their searches into the left box (the URL box) on your computer? If so, you'll just have to get used to not using the left box on the Touch. Remember, the iPod has fewer resources than a computer so the designers are using those resources wisely. Perhaps this is how it should be done on a computer. Now there's an idea!
You're probably going to suggest that one day there will be web site addresses with spaces in them. I suspect not - computer programmes (word processing, web pages/html etc.) recognise web site addresses by the dot and com (or .co.uk here in UK and .no for Norway etc.) and then recognise the end of a web address by the space. Anything after a space is not part of an address.
I hope this explains it to you.
Phil

Similar Messages

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • I lost my space bar on my safari but only safari.  Help

    I was typing along and suddenly my space bar dissappeared in safari. I have a space bar everywhere else and now I can't surf the web. Any suggestions?  Please help!

    Which part of Safari are you typing in ? If you are on the URL address field then you won't have a space bar as spaces aren't valid in web addresses

  • I have purchased 20 gb space in icloud yesterday but still space is not showing

    Yesterday i have purchased 20 GB space in incloud to update ios 8 but still space is not showing while money deducted from my credit card

    From what you've said, I get the feeling you think you've increased the space on your phone.  You haven't; you've only increased the amount of cloud space for backups.  There's no way to incease the physical storage on a phone; you can only free up space by deleting content.

  • I recently deleted approximately 80gb of space on my hard drive by dragging items to the trash and then emptying the trash.  However, the space does not show up on my HD as free. Can anyone point me in the right direction?

    I recently deleted approximately 80gb of space on my hard drive by dragging items to the trash and then emptying the trash.  However, the space does not show up on my HD as free. Can anyone point me in the right direction?

    If you are using File Vault, turn it off.  To find out where all the extra space is use any of these products - Disk Inventory X
    OmniDiskSweeper
    WhatSize
    SpaceControl

  • My iphone problem is network bar not show for searching why how can resolved my iphone

    my iphone problem is network bar not show for searching why how can resolved my iphone
    my iphone model is MD239B/A
    my iphone serial no: DQ******TD2
    <Edited by Host>

    Hi mirza_ali,
    The article below may be able to help you with this issue.
    Click on the link below to see more details and screenshots. 
    iOS: Understanding cellular data networks
    iPhone: Wireless carrier support and features
    I hope this information helps ....
    Have a great day!
    - Judy

  • Possible Solution to Google Search Bar Not Working/Safari Not Loading Pages

    Hello Apple Forums,
    I have recently encountered a possible solution to a problem with Safari. The one in which Safari fails to load any page associated with www.google.com. Especially the Google Search Bar—a feature I use frequently.
    After browsing through the forums about the Google Search Bar issue, I took my knewly gained knowledge, and decided to do some diagnosing for myself.
    This is what I have done so far to try and solve this issue:
    Run Daily, Weekly, and Monthly Cron Scripts
    Cleared the following caches:
    System Local Computer Cache
    System VM (Swap) Files
    Curent User Cache
    Current User Icon Cache
    Internet Explorer Download Cache
    Page History
    Web Site Cache
    Temporary Files
    Safari Downloads List
    Form Values
    Page History
    Recent Searches
    Site Icons
    Web Site Cache
    User Cookies (used by Safari)
    Finder Recent Applications
    Recent Documents
    Recent Folders
    Recent Servers
    Recent Files of AppleWorks 6
    Disk Utility Disk Images
    Preview
    QuickTime Player Favorites/Recent
    REALbasic Projects
    TextEdit
    VideoLanClient
    and Other caches of Acquisition Current Downloads
    Acquisition Recent Searches
    MSN Conversation History
    Vicomsoft FTP Client Icon Cache
    All of the above runnings of Cron scripts and clearings of Caches were done using Mac Pilot version 1.1.5 (yes the one on the site is an updated version, but I have not downloaded it yet). If you decide to use this program to clear caches, I advise not clearing the Installer Receipts under the System section as Installer Receipts are used to correctly repair permissions. I do not clear Find File Indexes either, because I use the Find File feature quite frequently on my computer and I do not want to have it re-index files all the time (perhaps I'll do it every few months or so to refresh what I've got on the harddrive). Remember, all the information given in this paragraph is relative to Mac Pilot version 1.1.5.
    In addition, I have also repaired permissions using Disk Utility 10.4.4 (v145.7) (make sure you restart your computer after you repair permissions). I have taken out items in /harddrive/library/StartUpItems as well as taking out items in /harddrive/library/Internet Plug-Ins and in /user/library/Internet Plug-Ins and in user/library/Caches (restart your computer after taking out or putting in items in these locations).
    As of now, all the information mentioned above about trying to fix this problem have NOT worked.
    What HAS WORKED for me was tinkering with my 3rd party firewall—Norton Personal Firewall Version 3.0 (48). Under the Protection Settings, I HAD Enable Active FTB support, Enable Stealth mode, Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected), Enable UDP Protection (with Protect outgoing UDP connections, Allow access to essential services, and Protect a range of UDP ports 1 through 1023 selected).
    What I CHANGED in Protection Settings was DESELECT Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Upon deselecting that information the Google Search Bar feature in Safari WORKED practically instantaneously. Before hand, anything I inputted into Safari and after hitting Return on the keyboard just wound up hanging there.
    Just to be sure, all tests were performed on:
    IMac G4 800 Mhz SD Mac OSX 10.3.9 with ALL the latest Software Updates, Except Apple Remote Desktop Client version 1.2.4 and iPod Updater 2006-01-10
    I have a cable internet connection with ISP Time Warner Cable (RoadRunner) using a SurfBoard SB4100 Cable Modem on an AirPort Extreme Base Station (Apple Base Station V5.6)
    Interesting side note: I have a PowerBook G4 15" 1 Ghz Mac OSX 10.3.9 Laptop running on the same network (although it has an airport extreme card as opposed to the regular airport card in the iMac) with ALL the same latest Software Updates, Except iPod Updater 2006-01-10. The Apple Remote Desktop Client version 1.2.4 does not come up on Software Update on the Laptop and I can not find it on the harddrive using a name search in the Finder Find feature. It does not show up in Applications folder, so I do not know if it is on or active on the Laptop.
    The LAPTOP IS ABLE TO USE ALL GOOGLE FEATURES without DESELECTING Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic DESELECTED). Why this is apparent I have not officially confirmed.
    What I do know is that I have tried to Uninstall Norton Personal Firewall Version 3.0 (48) with the appropriate uninstaller but it FAILS during the uninstall (I wanted to uninstall and reinstall, it appears the program became corrupted). What I did to possibly circumvent this was to search for the phrase 'Personal Fire" using the Finder's Find feature (Search for items whose name contains 'Personal Fire') and deleted all the files that came up related to Norton Personal Firewall Version 3.0 (48). I then reinstalled Norton Personal Firewall Version 3.0 (48) since then, and it continues to have the problem with Enable suspicious activity protection (with Deny outgoing suspicious traffic and Deny incoming suspicious traffic selected).
    What I have not done:
    Updated Prebinding
    Run TechTool Pro version 4.1.2
    Install Combo OSX 10.3.9
    Initialize HardDrive with complete reinstallation of OSX 10.3.9
    To Summarize Possible Solution
    I've tried many possible solutions, what appears to work best as of now is to DESELECT Enable suspicious activity protection (making sure Deny outgoing suspicious traffic and Deny incoming suspicious traffic are deselected) under Protection Settings in Norton Personal Firewall Version 3.0 (48).
    One could try deselecting something similar in any firewall application other than Norton Personal Firewall Version 3.0 (48), to see if it is suspicious activity settings in firewalls that cause the problem.
    Any comments/feedbacks are extremely welcome.
    Hope It Helps!
    iMac G4 800Mhz SD 10.3.9 & PowerBook G4 15" 1 Ghz 10.3.9    
    iMac G4 800Mhz SD    
    iMac G4 800Mhz SD    
    iMac G4 800Mhz SD    
    iMac G4 800Mhz SD    
    iMac G4 800Mhz SD    

    Hello tr:
    Welcome to Apple discussions and thank you for your very very thorough post.
    Your instincts to delete anything named "Norton" were right on the mark. Norton software is POISON to Macs running OS X. An additional software firewall is, IMHO, completely unnecessary. Turn on the built-in firewall in OS X - it is robust. In fact, if it is already on, there may be a conflict.
    Go to Symantec's web site and use the uninstaller you should find there to get rid of the Norton stuff. After you do that, do a "find" on Norton and Symantec to be sure it is all gone - the stuff hides everywhere.
    Barry

  • Space Bar not responding during editting

    Under normal circumstances when editting in the timeline, my reporters use the spacebar to play and pause/stop the timeline. There has been some issues of late where the space bar seems to not be working, and requires two or three pushes before it plays or pauses the video in the timeline. The video being rendered does not affect it one way or the other, and it is not constant. It can happen at any time, and often doesn't affect a reporter, or will affect a reporter non-stop (both occured today). For the record, yes I have checked the keyboard and it is not the problem. The spacebar works fine for normal use, its just PPro that has the problem.
    Specs: I have four identical edit bays. Each has a Dual Core 2.5 Ghz Pentium  processor, 3.0 gbs of ram, a single sata drive split into two partitions  (system 30 gb and video 470 gb). I am running up to date PPro 5.0.2,  freshly installed on virgin drives. I have two of the bays with the most up to date 64 bit  manufacturer video and audio drivers, and two bays with Windows 7  automatically installed video and audio drivers. The problem is the same  in all four bays.
    Help?

    Your problem is that your systems are below minimum requirements, with some serious setup faults.
    This is harsh:
    1. A single disk is below minimum requirements. You need at least two physical 7200 RPM SATA disks
    2. Never partition a disk. It will only increase wear and tear and slow down performance.
    3. You likely never tuned your system. Look here: Adobe Forums: Guide for installing and tuning a Vista... This also applies to Win7.
    4. Your dual core CPU is absolutely bare minimum for DV material, but anything more will grind to a halt.
    5. 3 GB RAM is not enough.
    You are in for a serious upgrade of your systems.
    First Harm, I do want to say thank you and that I realize you are trying to help. But, budget is a major issue, and the likelyhood of upgrading soon is non-existant. So what can we do to work within the specs I have? I had not done all of the steps in the tune up, but yes most of them I had, specifically I had not installed Ccleaner, and I had not turned off all of the windows add ons as yet - both will be fixed soon. Our editting needs are pretty minimal to be honest, which is part of why its so frustrating that PPro is being so cantankerous. Cut in and out of five or ten clips, add in a voice over track, and once in a great while a cross fade between two clips or fade out audio (using the pen tool), export to mpeg, and we're done. Our longest package is 4 minutes and that's most of a news block (segment between commercials - we have a 30 minutes news show, so you can imagine most are in the 1:30 to 2 minute range).
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Someone is sure to comment on that.  I wanted to jump in first and say that while the idea of using a single partitioned hard drive isn't a good one, doing so is highly unlikely to be the cause of this particular issue.
    Thanks for the reply. Yeah, I knew about someone would say something eventually, but given that it works most of the time, and only freezes up occasionally, like you I find it unlikely that this is the issue. I'm not saying it won't contribute to it (I know it can). The sad part of all this is I can't get it to replicate the space bar freeze up for me, and while I experience it when I go into the bays for the reporters, I have no idea what they have done up until that point in order to troubleshoot what they are doing wrong. I can and have run an install at the same time as editting video and not had a single slow down whatsoever, while several reporters have issues running PPro and notepad. One is running her yahoo mail in IE, and I think that is one of the problems she runs into (given how resource hoggy IE can be - especially on yahoo's webmail interface), but that's one person, not all of them.

  • Space bar scrolling in safari is slow and laggy

    Been searching this for a few days, and while I know some people are having "jaggy" scrolling issues in Safari (caused - or not - by the new Flash install), my experience is slightly different, and appeared at some point over the last week or so.
    In short, it's just a lot slower to scroll via space bar. It used to snap right down to the next part of the page almost instantaneously, but now it sorta "slides" down. Scanning long web pages is a drag.
    Chrome and Firefox still jump instantly to the next page via space bar, so it's a Safari-based issue. Curiously, the two-finger scroll is still fairly instant on Safari, but it's not a natural movement for me.
    Anyone else having this issue, or possible fixes?

    Ok...
    Some users with a similar issue found a solution by uninstalling the Flash plugin, then reinstall new, then repair permissions. See this thread: http://discussions.apple.com/thread.jspa?messageID=11691898&#11691898
    Uninstall Flash
    Install the most recent version of Flash here.
    Now repair permissions.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.

  • Navigation bar not showing in IE browser?!!

    The navigation bar is not showing in Internet Explorer at all! It is just fine, of course, in Safari.
    Firefox shows the nav bar but in two lines, and another info box appears for a second then vanishes.
    www.thestudio33.com

    IE won't show your navigation if the user has Java turned off.
    You need to hide the standard iWeb navigation and create your own....
    http://iwebfaq.org/site/iWebNavigationmenu.html
    You are using the "Darkroom" template and your navigation box is offset to the left - probably because you extended the page width beyond the default.
    This template has its problems and slows the download speed of your website.

  • Google tool bar not showing

    I have downloaded and installed the Google tool bar. I have the tool bar checked but it does not show up. It appears the menu bar on top drops down to make room for the tool bar but the icons never show up. I can't figure out what is blocking it from displaying or if there is an issue with Firefox 4. Using window 7.
    Thanks
    Doug

    Contact and support information for add-ons hosted at AMO is shown to the right of '''''About this Addon''''' on each add-on's download page. <br />
    https://addons.mozilla.org/en-US/firefox/addon/wot-safe-browsing-tool/
    http://www.mywot.com/ <br />
    http://www.mywot.com/en/support

  • Outlook 2007 "To Do" bar not showing iCloud Calendar events:

    It may be that Apple did not program into the iCloud software that piggybacks to Outlook 2007 the "To Do/Appointments" bar that shows all your iCloud calendar events on the right side of Outlook. It took hours with Apple to get all devices to sync with Outlook but it now syncs, finally.....just can't figure out a way to see the "To Do/Appointment" bar on the screen right side when the calendar is up. Anyone figure out if that feature still functions or if that is disabled when the iCloud piggyback software is installed with Outlook 2007?

    hi!
    i just want share my ideas.
    option a: please check your conduit if it automatically goes to do nothing. if that is the case, check if you have an EAS account on your versamail.
    option b: try creating a new calendar data on outlook then syncronize your phone. if the new  data will transfer, it means that the rest of your calaendar data are corrupted.
    option c:try to check also that if your calendar data on outlook are on the default calendar folder and not on a subfolder.
    please feel free to reply if what happens after you perform them.
    thanks
    Post relates to: Palm TX

  • Space bar not the same

    I'm just curious, is anyone else's 15" MBP's space bar "press" differently than the other keys? All the other keys are real quiet, but when I hit the space bar it lets out a much louder pressed noise. This is really annoying when you're typing a long sentence. Is this something that Apple just dropped the ball on, or is there something wrong with my specific keyboard?

    on mine it may sound just a little bit different, since it's the largest key on the keyboard.
    and I use the moshi clearguard keyboard protector which also reduce the sound of typing.
    and I'm not a very fast typer just average so I don't press that hard on the keys.
    I don't think yours should be any different.
    best check out the demo unit by applestore.
    hopefully it's not very far from you.

  • Gt-60 space bar not working

    I have had a gt60 for almost 2 years now, so it is definitely not under warranty anymore. And recently, an issue came up. When I login to windows 7, right when the login screen appears, the spacebar is continually entering, like it is being held down. I press any key and it stops. From that moment on, the space bar does not work. Then if I press "zx", the spacebar acts as if it has been held down again. it is very strange. I tried the keyboard under Linux, and the spacebar does not work. I think its a hardware issue,  but I am not sure. Any advice, or anyone experience a similar problem?

    Hi,
    Yes i have a similar problem but it is my tab key.
    It started a few months ago and went away and recently made an unfortunate return yesterday.
    My problem is that when my laptop is turned on the tab key is always "pressed", however when i used to press it it would stop and start again in a few seconds.
    This time around after i press it, it instantly goes back to the always pressed state.
    (I should also mention i think pressing caps lock also stops it briefly (<1 second) and it starts again.)
    However, after about 5 to 10 minutes of trying to use my laptop the problem goes away and i can use the tab key as normal.
    (By trying to use i mean using it while pressing tab to get it to stop for 1 second to click or do something.)
    Did you solve your problem? Let me know please!
    Or i might have to disable the laptop keyboard and buy an external one :(.

  • FCP7 space bar not working properly...

    Hello everybody...
    I am having a litlle trouble that lately is becoming a real pain. For some reason when I turn on my mac and start FCP, the space bar when pressed does not work anymore as the "play" button...So I have to close the program, reboot the computer... Sometimes even 3 or 4 times until it works...
    Is there a solution for that? Please help......
    Best regards to you all...

    Read this: https://discussions.apple.com/docs/DOC-2491

Maybe you are looking for