Space between regions , release 2
Using Portal release 2:
We cannot create a page using two regions that have their width spesified in pixels. Portal generates one table for each region, but with extra space between them.
This did not occur in portal 3.0.9.
Help appreciated.
Anders and I have been struggling with that for a while, so we found the way around it: maybe nto most ideal way, but it works.
Create an user interface template, that has the table in it, that defines the width. Than your regions will be put in that table, and they will stay like that.
Hope that helps
Tanja
Similar Messages
-
Add horizontal spaces between regions
Hi everyone,
We use APEX 4.2.
I want to know if it's possible to add horizontal spaces between "region a" and "region b" ?
How I can do this ? I don't want to add an extra "region c".
I taught about adding something in the header region or in the footer region.
Thanks in advance. Have a great day.Hi,
You could add some css to the first (left?) regio.
.rounded-corner-region {margin-right: 50px;}*.rounded-corner-region* depending on the selected regio.
Regards,
Kees Vlek
<tt>Company: http://www.orcado.nl
Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
Twitter: http://www.twitter.com/skier66</tt>
If the question is answered please change it to answered and mark the appropriate post as correct/helpfull. -
Hi there, i am having trouble controlling the spacing between regions and wondered if anyone had come across this problem. Across the width of the screen i have 5 regions the widths are as follows:
%, 350, 190, 220, %
The regions set as % at the edges of the screen are used to pad out the rest of the screen and centre the content in the middle of the screen. The region of 190 is set to contain a portlet whereas the others are all set to hold items. The problems seem to be in the spacing between the content regions. The three content holding regions are supposed to add to 760 pixels in total, but there always seems to be big gaps between them especially the region of 350 pixels which holds an image and the 190 pixel region which holds an HTML portlet.
Is there any way to control the spacing between regions (ideally set it to 0). I have already checked all the region properties and both the space between items and around items is set to 0.
Any ideas as i am really struggling.
Thanks in advance.Hi Paul
I think your problem comes from your mix of % and pixel wide regions. HTML does not like tables with rows defined like this, either use only %, or either fixes sizes.
There are possible workarounds :
- to center your "main" regions, try to set 99% width in the 2 edge regions
- try 49% - 1% - 1% - 1% - 49%, and put invisbile images of the wanted width in the main regions (transparents gifs, 350px width, 1 high). Images won't be shrunk. -
Hi all,
where can I define how many pixels are between the different Regions?
Thanks in advance!!!
DanielSomething you can try is making the right column a % so that it "fills" the rest of the page size out to the right.
Thanks,
Candace -
Space between Items in a Region
Hello,
How do I put a space/whitespace between items in a region?
For example I have to text fields on top of each other, I want to put some space between them without an input field?
Regards,
COlin.Hi Colin,
there is no need to create additional items to increase spaces.
Beter way to do this ( increase space between two items ) is:
1. In form - go to Edit Page Item of the second item which folows the first one and put in the HTML Table Cell Attributes something like that: style="width:150";
That increase label colon of the second item. You must be attentive that the value must be greater than the text in label of second item is.
2. In report - go to Page Definition -> Report Attributes -> Column Attributes ( of your column ) and than put in the CSS Sytle of Column formating section something like this: width:150px. In this way you would increase you field and in the same way increas space between the columns in report.
Regards,
Zlatko -
How to remove space between pages in Oracle Reports 6i?
Hi,
I have customized one oracle report (rdf). Earlier, the standard report was showing the ouput in pages i.e. there exists space beteen the pages. But I want my custom report in such a way that it should show me the result in one page i.e. there should be no space between the pages as user wants to spool the output into excel sheet (xls format) after getting the result output obtained from my custom report. Presently, when i spool the data into excel sheet, there is still the space exists between the pages like...few records will come then white space...then records.
How can I remove this space, so that user can easily spool the data into excel without existence of white space.
Any sort of help on this will be highly appreciated.
Thanks & Regards,
Sumir Chawla
Edited by: Chawla on Jan 4, 2009 10:20 PMHi,
My report is running on Unix. When I checked the output file in unix where it is getting generated, i saw ^L characters wherever the space appears when i see the output in apps (notepad) , like after every page where I am able to see the space in my output, there ^L is appearing in output file in unix, so how can I avoid this.
I tried to adjust the frames and repeatinf frames also, even i tried changing the properties also of main region (body), but nothing is working for me and still the same issue occurs. I am not aware of this. Please suggest me.
Thanks a lot!
Regards,
Sumir -
Why is the print output including spaces between every letter?
All printed output has spaces between each letter. Example:
A l l p r i n t e d o u t p u t h a s s p a c e s b e t w e e n e a c h l e t t e r .Caused by a Bug in 4.0b12, Was fixed in the 02-28 nightly, and the fix will be in the 4.0RC version due to be released next week.
-
How to remove space between two fields in emergency primary contact.
How Can I remove a space between the two fields.IN emergency primary contact there are certain field called "C/O" and a i have added one text for this field inside that.But it is taking a big space between the "C/O" field and the text view.Plz suggest how I can re,move this?Also How Can I add new transparent container with the end user personalization in the emergency contact field.
Hi Peddi
In my structure pannel I have simpleSearchPanel below that only i have the two lov fields ex: emp_no and emp_name . how to set the spacer between this From which Region where can find the spacer bean what proerty do i need to set
Thanks
AT -
How to set space between the fields in SearchPG- Display issue
Hi Friends
I Have created a searchPG with a QueryRN , In my searchPG i have some display issue after running the page its looks like this
For Example assue its a page with 3 field and one table region
Employee no
Employee name
Phone no
ResulttableBut i want my searchPG should hav some space between two field as shown below
Employee no
Employee name
Phone no
ResulttablePlease adviice me
I appreciate all ur advice
Thanks
A.THi Peddi
In my structure pannel I have simpleSearchPanel below that only i have the two lov fields ex: emp_no and emp_name . how to set the spacer between this From which Region where can find the spacer bean what proerty do i need to set
Thanks
AT -
Decrease the space between the columns.....
i have a tabular region, in that region i have 10 columns, the space between the columns have more space.
i would like to decrease the space between the columns.
how to do this?
Thanks and regards,
skud.help pls...
-
Transport between different releases
Hi,
Is it possible to have transports between two server with different releases,
one is on 701 and other is on 700,
pls advise.
ThanksHello Irfan,
Transport of customizing between diffeent releases is NOT supported. Also generated objects, which were generated by customizing, should NOT be transported between different releases.
SAP objects may NOT be transported between different releases (e.g. a table in an old release could have less fields than in the newer release and thus such a transport might delete data or if an abap calls a function module and in new release have one parameter more,then you get syntax errors if you transport only one of them from a system with the old release, ...).
So data loss and severe inconsistencies can happen if you transport SAP objects between different releases, or between systems with same release but different support package level or between systems with different addons or different add-on versions etc.
For pure customer objects (e.g. Z-tables, Z-programs, Y-tables, y-programs or objects in customer name space) it might be ok to transport them. But if e.g. your Z-table uses an SAP data element which has maybe been changed in the new release or does maybe no more exist, you can also get problems during transport of your z-table.
Data loss and severe inconsistencies can happen if you transport SAP objects between different releases, or between systems with same release but different support package level or between systems with different addons or different add-on versions etc.
Please check the following:
1090842 Composite note: Transport across several releases
1089083 Transports between Basis Releases 7.0* and 7.1*
556734 FAQ Transport: Setup and further information
Pay attention to point 5 and 6.
5. Are transports possible between systems with different Support Package versions?
6. Are transports possible between different R/3 releases?
Best Regards
Niraj -
I created a form based on the reports region. Is there any way that I can make the space between form fields on different lines to close to each other - i.e. 0 width between form fields "vertically". I tried to put valign="top" in either reports region template and region html table cell attributes but nothing works. Any working solution?
Thanks.
AndyAndy,
Are you using Firefox with the web developer toolbar? If so, there's a nifty feature that allows you to view the CSS that controls any part of the page by simply clicking on it. A new page will open in Firefox that shows you the CSS selectors/definitions that are relevant to the area you clicked. Most forms/report in ApEx are laid out with tables so it's likely to have something to do with padding or margins between rows.
Earl -
Hello,
I need to add space between rows. Please let me know how to go about.
I have a messgeComponentLayout Region, i am trying to create a space between two rows.
Presently it is as follows:
Vacation Plan
Sick Plan
I need as follows:
Vacation Plan
Sick Plan
Please let me know how to go about.
Thanks!The foll. is the region, how do i incorporate the rowLayout as suggested in the discussion. Please let me know.
<?xml version = '1.0' encoding = 'UTF-8'?>
<!-- dbdrv: exec java oracle/jrad/tools/xml/importer XMLImporter.class java &phase=dat+24 checkfile:~PROD:~PATH:~FILE &fullpath:~PROD:~PATH:~FILE -username &un_apps -password &pw_apps -dbconnection &jdbc_db_addr -userId "1" -rootPackage /oracle/apps/~PROD -rootdir &fullpath:~PROD:mds:directory -->
<oa:header version="9.0.3.8.12_1330" xml:lang="en-US" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:ui="http://xmlns.oracle.com/uix/ui" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$" text="Year to Date Accruals and Time Taken (total hrs.):" amDefName="xbol.oracle.apps.xbol.selfservice.loa.server.YtdAM">
<ui:contents>
<oa:messageComponentLayout controllerClass="xbol.oracle.apps.xbol.selfservice.loa.webui.MainRNCO" rows="7" columns="2" amDefName="xbol.oracle.apps.xbol.selfservice.loa.server.YtdAM" id="Main">
<ui:contents>
<oa:messageStyledText id="VaPlCo" prompt="US Vacation Carry Over" viewName="VacPlAcVO1" viewAttr="VacationCarryOver" styleClass="OraDataText"/>
<oa:messageStyledText id="VaPlAc" prompt="US Vacation Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsVacationPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="VaTk" prompt="Vacation Taken" viewName="VacPlAcVO1" viewAttr="VacationPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="FlPlAc" prompt="US Floating Holiday Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsFloatingHolidayPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="FlTk" prompt="Floating Holiday Taken" viewName="VacPlAcVO1" viewAttr="FloatingHolidayPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="AcBaTk" prompt="Accrual Bank Taken" viewName="VacPlAcVO1" viewAttr="AccrualBankPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="item2"/>
<oa:messageStyledText id="SiPlCo" prompt="US Sick Plan Carry Over" viewName="VacPlAcVO1" viewAttr="SickCarryOver" styleClass="OraDataText"/>
<oa:messageStyledText id="SiPlAc" prompt="US Sick Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsSickPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="SiTk" prompt="Sick Taken" viewName="VacPlAcVO1" viewAttr="SickPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="item1" rendered="true"/>
<oa:messageStyledText id="PePlAc" prompt="US Personal Leave Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsPersonalLeavePlan" styleClass="OraDataText"/>
<oa:messageStyledText id="PeTk" prompt="Personal Taken" viewName="VacPlAcVO1" viewAttr="PersonalLeavePlan" styleClass="OraDataText"/>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:header> -
Hello All,
I loaded text into Oracle table and stored as clob. However, there are many space between the words. Would you please show me how to remove the space between the words like da ta and dome stic?
table T1 contains filetext. One of row in the table looks like this:
filetext = '<P>The dollar value of the entire shipment. This was defined as the net selling
value, f.o.b. plant, exclusive of freight charges and excise taxes. The value da
ta are displayed in millions of dollars.</P>
<P>The total value of shipments, as measured by the CFS, and the U.S. gross dome
stic product (GDP) while similar in size provide different measures of economic
activity in the United States and are not directly comparable'
I am very appreciated all the help from you
JennyOr you can do this as suggested by cd ->
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:01.34
satyaki>
satyaki>SELECT replace(CONVERT('Ä Ê Í Ó Ø A B C D E ', 'US7ASCII', 'WE8ISO8859P1'),'?','') filtered_res,
2 CONVERT('Ä Ê Í Ó Ø A B C D E ', 'US7ASCII', 'WE8ISO8859P1') non_filtered_res
3 FROM DUAL;
FILTERED_RES NON_FILTERED_RES
A E I O A B C D E A E I O ? A B C D E
Elapsed: 00:00:00.03
satyaki>
satyaki>Regards.
Satyaki De. -
Newbie How to put spaces between buttons
I have a CANCEL and a SAVE button in a REGION.
I tried putting  :
I would like to put about 4 spaces between them.
Suggestions?
Thanks.
SteveYou can try putting &nbsp;&nbsp;&nbsp;&nbsp; (that's a semi-colon, not a colon) in the Post Element Text of the first button.
Regards,
John
Maybe you are looking for
-
Is the worst thing about iphone it's ringtunes, and how do I fix???
Hello there, Unfortunately I am now within hour 15, in my attempts to replace Apples purposefully terrible ringtones with new ones, and I've bought a few now... However none of them work.. they aren't even recognised on itunes as ringtones. I bouhgt
-
Dear all when register extract for RG23C Part-1, display two line items instead of one, The following process is followed for capital goods 1. Purchase order for capital good me21n 2. Good receipt Migo (Capturing excise duty) 3. J2I5 & J2I6 pls hel
-
Reminder app problem adding new entry.
I updated my iPad to IOS 5. Testing the "reminder" app lets me easily add new reminders. After three tries all the buttons under "edit" disappeared. Is there any way to reset/reinstall the app or to get the buttons back. As I'm from Germany maybe the
-
I am working on opensource project and i am buiding it from source. it will work on jdk1.5 and orackle 10g, when i am buindling, i am getting error of timestamp as: "reference to Timestamp is ambiguous, both class java.sql.Timestamp in java.sql a nd
-
Hello Experts, I would like to get my company's logo in the URL bar. Ordinarily this is done by placing an icon named favicon.ico into the root directory of the web server. Does EP7 support this? Does anyone know how to do it exactly? Regards Mr.T