Space Designer -- none of the presets are working! they are grayed out

I am using a dual core iMac with logic 8 totally updated version but I've been having this problem with space designer and possibly a couple of the other logic played in effects. When I tried to pull up a preset it goes up a search for box I'm going to applications support/logic/played in settings and I tried to select the desired preset that it is asking for and I find that it is there but it is grayed out and it does not load up. Presently I can only use the default effect. Does anyone know how to fix this? This is frustrating!
Thanks much!
Help!

That is correct your 4th gen iPod can't run any newer then 6.1.6
If you wish use apps that require iOS 8 then you need a newer iPod that is capable of running it

Similar Messages

HT204368 Apple should be ashamed to launch iPhone 5 without checking whether the Bluetooth is working they are fooling people.The iphone 5 does not discover jawbone Bluetooth at all iPhone 5 use to it is very bad on the part of Apple

As I mentioned Apple should take immediate steps to see that they correct this grave mistake with Bluetooth pairing since it is the least they could have tested before they launch this useless model .immediate means in 12 hrs the least they can do

Bluetooth works with headset and Nissan bluetooth here.
With what model Jawbone are you having a problem? What have you
tried to resolve the problem? What is the exact wording of
any error message you received? Have you looked at the Jawbone
fora for suggestions?

Hello! I use the VSCO preset that was easy to download and use right away a few months ago. This morning I did the same thing and it downloaded successfully but none of the presets are listed under the new VSCO folder I bought. How can I fix this? Does Li

Hello! I use the VSCO preset that was easy to download and use right away a few months ago. This morning I did the same thing and it downloaded successfully but none of the presets are listed under the new VSCO folder I bought. How can I fix this? Does Lightroom have a limit on presets?

Hello! I use the VSCO preset that was easy to download and use right away a few months ago. This morning I did the same thing and it downloaded successfully but none of the presets are listed under the new VSCO folder I bought. How can I fix this? Does Lightroom have a limit on presets?

None of the fact sources for [column] are compatible with the detail filter

Hi Experts,
I am using obiee 11.1.1.7.
Getting below error when i add a filter of non conformed dimension column.
Below is the error
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
Please help in solving an issue.
Regards,
NN

Hi NN
You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2 queries.

HT201263 None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

Read: iPad Troubleshooting Assistant
That procedure eventually leads you to the need to restore it.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPad in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
If you still can't get it to work, you have done all you can and only Apple will be able to help.

Cannot find any number on box that begins with 1057, none of the other numbers work as a "serial number".

cannot find any number on box that begins with 1057, none of the other numbers work as a "serial number".

Serial numbers are normally only applied to the disc case. If you cannot find one on the disc case then you might be dealing with a redemption code scenario... depends where you bought the software and what the software is.
Find your serial number quickly
Redemption Code Help

None of the demo is working

Fellow developers, I got this application installed after all on Windows XP. It automatically set up some port numbers. I am able to use one why the other retruns error message - Page not found.
Then none of the demo is working - A critcal look at the Apache conf file did not indicate any directive pointing to the portal, wireless etc demos.
Is there any work around this.
Now that this is installed and at least few pages working what next? How do I get into other applications in the system.

Hello again
Sounds like you have never had Captivate training.
Click Boxes are transparent by their very nature. There is nothing you need to do to "hide" them from your user. The "Visible" check box is there so you can hide them from the Flash Player at runtime. For example, maybe you have a Click Box that should only become "clickable" once the learner performs an action. So you would toggle off visibility then using Advanced Actions you would turn visibility back on and make it become clickable.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Tecra A8 downgraded to XP and none of the Toshiba utilities work

HI all,
I just got a new Tecra A8 - it is downgraded to XP and none of the Toshiba utilities work (power saver, function keeys, hot keys etc). When I try to reinstall them - there is always an error message (missing dll, or sth similar) - I tried to updated the bios - couldn't - again missing a file!
any ideas how to fix this? at least the fn buttons (fn button works - I can see a light coming on when I press - not the functions though!)
your help i greatly appreciated!
cheers,
Dimitris

Hi Darlac ... - well - I have a Tecra A8 - PTA8XXX series, and it also came with Vista on board.... This of course was useless - as none of the technical systems - I will be using - work with Vista, I had to downgrade to XP SP2 ...
Apparently - Microsoft have a document that allows this legally!! besides that I was told it was illegal... Anyhow - what I did - was locate an XP2 - and then I had to start the search for the drivers... - This took a few days - but eventually found them on the Toshiba-Europe.com ... website in the drivers section ... about 400 megs of data I copied off the network...
(so now I hopefully had the drivers)... and in one of these little files - i downloaded is an instruction - on how to do all this marvelous stuff...SO - you have a lot of work to do... believe me - I am still busy with it... and what I want now - is the program called "Recovery Disc Creator" - which we really need - as I believe that this helps you make up a recovery CD-ROM of all the files that you need to put onto the Tecra ...
When I first started - I was too quick to load some utilities and hoped that they would work... but alas - I was very down hearted, and so as normal - i said to hell with everything - JUST DO IT ... and got down to 'brass tacks' - and now I must say that last evening 27-5-2007 - quite all of a sudden - most of the utilities are actually working...
(I must say that altogether - I think I have downloaded about 800 megs of files, and utilites from various sites ... and have used some of this and some of that - but the Toshiba-Europe.com site - in the drivers section - really sparks - as you select which machine you have - and away you go... Even my son - is surprised at how far I have taken this Tecra - on XP SP2 ... he is quite amazed - as some of the utilities do not even work on his notebook
Okay - well - now you can mail me if you like - [email protected] - and I will help you more, if I can .. and maybe anyone else reading this post - that has this mystery "Recovery Disc Creator" program - I would love to install it - it also apparently travels with something called "Recovery Disc Launcher" - whatever that is... but I hope that as I imagine it - that this utility - allows me to make my own recovery DVD, or set of CD's ...so that just in case something goes wrong.
I can hopefully then use it to recreate my hard drive...
Okay - hope you get it right... read that list - do each and most of all the things that they require, step by step - in turn...
Kindest Regards
recnepS
...South Africa...

On my 6 month old HP Pavilion Notebook none of the USB ports work.

On my 6 month old HP Pavilion Notebook none of the USB ports work. In Device Manager it shows the USB attached devices as unknown. This computer hasn't had any HP updates since I bought it new.
Product ID = LF153UA#ABA
System ID = 165c
S/N: {Removed for privacy}

Right Click on all devices which are recognized as unknown and Choose Uninstall one by one.
Please ensure you also do this for any and every item under Universal serial bus controllers as well. After this restart your computer and you should be good to go.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

I have an imac and macbook pro. my creative suite 5.5 design premium is on them both. I'm about to take them in to the apple store because they are running bad and have them completely restored to factory settings. when I get them back will i be able to r

I have an imac and a macbook pro. my creative suite 5.5 design premium is on them both. I'm about to take them in to the apple store because they are running bad and have them completely restored to factory settings. when I get them back will i be able to re-install my adobe creative suite to both of my computers using my same product code from when i first bought it?

Yes. Just make sure to deactivate the license on both systems using Apple menu --> Deactivate while one of the suite programs is running.
Mylenium

My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

My iphone 4s is saying NO SERVICE.I tried to put it on airplane mode,tried to reset the network setting and also tried to restore my phone but none of the above things worked.Do you guys have any idea what should i do now?

Hi sunnylordz,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you have no service on the iPhone. It looks like you have already done some troubleshooting. There is one step you did not mention trying that i think is worth trying.
If you see No Service in the status bar of your iPhone or iPad - Apple Support
Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
Cheers,
Mario

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

Thinkpad W530: None of the USB ports work when used with a 4338-35U replicator

I have tried mouse. keyboard and a generic USB stick with a LED. None of the USB ports work on the replicator. Everything works fine when connected directly to the W530. The replicator ports must not have power because the LED doesn't come on.

Hi mmjmm123,
How long have you had your replicator?
Has it always been like this?
This link is to the Lenovo User's Guide for replicators:
http://download.lenovo.com/pccbbs/mobiles/43r8770_users_guide.pdf
Scroll to Chapter 5 for troubleshooting procedures.
Replicators do have limitations which can be found here:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69755
Check these sources and let us know how it works for you so we can share the knowledge.
Enjoy your day!
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Keep receiving error when trying to change device on my verizon. Unfortunately, none of the lines on your account are eligible to receive the Online Authorization Code

Keep receiving error when trying to change device on my verizon. Unfortunately, none of the lines on your account are eligible to receive the Online Authorization Code.
Unable to change device on account.

That would be great if they weren't 2 different size SIM cards.
The code is a security feature and I realize this. It is to prevent someone from hacking your account and changing your devices without your knowledge. However, I am the account owner and I know exactly what is going on with my account at all times. I check data usage AT LEAST 2 times daily and I log into my account at least once daily. I would very quickly discover any issues. This feature is more of a (removed)
Edited as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

HT4623 Since I installed the new update, my search feature will not work. It will only search my ipad. None of the searh engines work in Safari

Since I installed the new operating System, my search feature does not work. I can only search my ipad. None of the search engines work in Safari. How do I fix it?

Just just to make sure, you do not see something like this when you try to do a search in Safari?
Try clearing Safari in Settings>Safari>Clear Cookies and data. Then close Safari. Double tap the home button and drag the mini Safari window up toward the top of the screen in the multitasking display in order to close the app. Now reboot the iPad. Hold down on the sleep and home buttons at the same time until the Apple Logo appears on the screen.
Try Safari again.
The Spotlight Search feature on the iPad search) no longer searches the web, that is simply the way that Spotlight works now. Sort of a backwards move IMO but somewhat typical of Apple these days.

Space Designer -- none of the presets are working! they are grayed out

Similar Messages

Maybe you are looking for