Space in task description

Hi All,
I got a problem with the description of my dialog task: I cant put a space before an included expression.
I digit Space but expression results attached at the previous word...
Thank you for help
MTuscano

Hii MT,
Well Itz working fine for me.
I mean i tried it with my system 6.0 and no such issue.
May be you need to explore about the formats at the left column(normally comes into picture once u r done with one line and switching to new).
Otherwise recheck it, it should work fine.
Regards,
Ashish

Similar Messages

Writing multiline records in task description

Hi,
I try to write a mutiline element to a task description, but all the elements appear in just one line separated by space. In earlier SAP version there was a popup asking how the table lines should be arranged in the text (only the first element, all elements in one line or each element on a new line).
But this popup does not appear anymore.
Thanks for help.
Daniel

Hi Daniel,
Have you tried manually appending ## to the multiline container element?
e.g.- &PO.Description##&
Regards,
Akshay Bhagwat
Note:Pls mark helpful answers.

Hyperlink on task description

Hello,
I need to display hyperlink on Task description and the total length is almost 170 char.
I have split it into three variables, URL1 URL2 and URL3.
All gets printed correctly, but after 132 char and extra space comes automatically, and it breaks the hyperlink.
I heard of ALIAS, but i tried using it, that also does not reduce the length less than 132 char. May be i am doing something wrong. d we have any documentation for this.
If ALIAS does not work, then do we have any other workaround for this.
Can we somehow send the link as attachment or any other method.
Please let me know.
Thanks in advance.

Hi Gaurav,
Two points:
Firstly, are we talking about the same thing when we mean alias? An alias is defined on the internet service to make the URL shorter; i.e. something like:
http://example.com/sap/bsp/something/blah/stuff/myappname?param1=abc&param2=def
becomes
http://example.com/alias?param1=abc&param2=def
Note that you could leave off the sap client and if language is not relevant it can also be left off.
Secondly, it looks like you're passing a task launcher. Have you considered using Extended Notifications? You may have a valid reason, but I can't think of a scenario where I would want to use a sendmail task to send a work item launch URL rather than Extended Notifications which are more flexible and produce a much nicer looking email.
Regards,
Mike

Search not working on Task Description

Hi,
I am facing a strange scenario with search not working on Task Description for a particular task item. This task item has around 18 versions of itself within it.
I tried replicating the same scenario in our Test environment with following changes in the task item description:
1. Copied the task list over to Test environment.
2. Deleted all the versions of this task and put a single line description as.
3. Initiated full crawl and search results with task description were
coming up fine.
4. Made few more versions : 5 Versions and again initiated full craw. Search results are fine.
5. Made few more versions this time and again a FULL crawl, but now NO results with this task description.
So, my question here is that is there any limit by MS for multiline text limit or version limit which prevents the task description from coming up in search results.
This task description as multiple line text with links to other lists/libraries and user names who created the versions in this task item. We are not using FAST search.

I found the answer elsewhere on the forum:
Somehow the main drive was added to the privacy list in Spotlight. Search is working fine now that I've removed it.

How to pass fields in task description so that it will come in sap inbox

Hi all.
(very urgent)
I am doing one workflow on vendor payment workflow.
I want to pass some fields in the task description so that that they will come in the user decision description.
Pls help me solving this.
Please replyif more clarification is needed.
Good points will be rewrded for solution.

Hi Tapu,
You did not find your BO means in the workflow container you has not mentioned ur BO. What is the Element name for your Object that will come here.
In your workflow template container should have Expression of ur Object(BUS2081). So, Create the Element for Expression in Wf Container.
Example in User Decision:
Title: Make Sure your Decision of Sales Order
Agents:
Expression: &SALESORDER& ( F4)
Decision Option:
Approved:: Send Notification Approved
Rejected:: Send to Initiator with Reason Rejected
Thanks and Regards,
Prabhakar Dharmala

How to round value of container element in task description

I am trying to round the value of the container element from 3 decimals to 2 decimals for display purposes.
The command symbol in the task description is &_WI_Object_Id.OverallTotalCost&. I have looked at SAP Help and I have tried the suggestion of &_WI_Object_Id.OverallTotalCost(.2)& and &_WI_Object_Id.OverallTotalCost(Z.2)& with no success.
I have also searched the sap-wug mailing list and SAP ITToolBox and found no references rounding a container element in a task description. I have seen code assigning a value to a packed decimal variable to round. But I have not been able to get this to work as a command in a description for a task.

I created a new element in the container as suggested by Glauco and added the element binding in the workflow / task binding. Biggest hassle was finding a business object that had a type of 2 decimal places to use for the new container element.
The reason why the SAPScript symbol for reducing the number of decimals does not work in Task texts is because the container elment symbols are resolved first as text. Therefore only the SAPScript commands that apply to text will work like length.

How to use loop in workflow task description

loop doesnt work in pftc task description command line. please help

Hi,
Could you plse check this link 'http://mailman.mit.edu/pipermail/sap-wug/2005-February/016575.html' to solve ur problem
Regards,
Rajeswari

Double-spacing in my Task Description?!?

Hi Guru's!
Release 4.6C
I have created a perfectly normal decision task and added some text in the task description. The only thing that I have done differently this time is use the &ULINE(xx)& command.
When this task is executed, all the text comes out double-spaced (i.e. with a blank line between each line of text). Any idea why it's doing this?
Cheers
Lyal
EDIT: When I remove the &ULINE(xx)& command, it is still double-spaced.

Hi Guys
Thanks for the suggestions. Once again I have learnt the advantages of using the normal text editor as opposed to the pretty graphical one.
As it turns out, I had cut and pasted some text from a different task. In it's wisdom, SAP made each line a new paragraph. Going into the normal editor, it was immediately obvious that each line had a * next to it instead of being continuous text or a line feed (/). D'oh!
Abhishek, you can use normal SAPScript commands in your task description.
Cheers
Lyal

Print out Standard text in Task description

Hi All,
is it possible print out the standard text in the workflow task description?
I need to display some information in the business workplace, but i don't know how to print out the standard text in task description.
Regards,
Luke

Hi Luke,
Are you lloking to print Standard texts in Workitem...
You can do that... you will have to first create a method to read SO standard text using READ_TEXT and pass it on to a multiline container which you will have to mention in the Task description.
For syntax please search relevant threads...
Rgds
Gautam

Change Style in task description

Hi All,
     I am using a decision step in my workflow. I want to change the default font style associated with the task. The default is Form: System and the default paragraph is '*'.
     I want to use custom style for formatting the task description. The Menu option Change style in Change editor is not allowing me to select the zstyle i have created.
    I will appreciate if anyone can provide me a solution.
Thanks & Regards,
Manikandan Ramamoorthy.
Note: All supportive answers will be rewarded

Hi Barry,
I also checked, and we are not having any options to choose the particular style.
Hope its a limitation we have in workflow.
Because when i checked the same option SO10, we have an option choose.
So workaround will be like this:
Create your desired text in SO10 with your own style and include that standard text in your task description.
Hope it solves your issue.
Thanks and Regards,
Swaminathan

Adding Space after ## in description

Hi
I have a requirement where for example-
Text field has letter as ## in description - material number is ##5This is ok.
I have to change the above description as- material number is ## 5This is ok.
That is if there is no space after ## , we have to add a space in the description.
Please provide me ABAP code for that.
Regards
Deep

" do this first so that if there is a space it will not show double spaces
replace '## ' with '##' into maktx.
" then do this
replace '##' with '## ' into maktx.

Attach ABAP report on SELFITEM in Task description

in the workflow object type SELFITEM method SENDTASKDESCRIPTION i want to attach a ABAP report in the Task description. how do i do it.
thsnkx
rendani

Hello,
I think you have rightly pointed out the reason of the error. You must have maintained the logical system 'QCCCLNT703' using transaction CRMS_IC_CROSS_SYS. However you also need to maintain the same entry in transaction SM59 with name RFC destination name as 'QCCCLNT703'.
I hope this would fix the issue.
Thankx,
Amit Sen

Dynamic task description in sap inbox displaying carriage returns as an * ?

Hi All,
I have a method in my business object whereby I dynamically create the description of the task for the sap inbox, ie. the description the user sees for the task in their sap inbox .
At first I built this description into an internal table of type tline.   I would have thought that each row of the table would begin on a new line but this did not happen. The rows ran into each other but were seperated by a semi colon.
Then I included a carriage return (cl_abap_char_utilities=>cr_lf) at the end of each row. This had the same output but instead of the semi colon, it output an asteriks.
Then I concatenated all the output into a string and passed this to a FM which splits the string at the carriage return and outputs the table. While this behaved as I wanted in a test program (i.e. new line for each row) , once I put the code in the business object, all the rows ran into each other again..
So is anyone aware of a way in which you can dynamcially build the task description and maintain the formatting you require?
I'd be very grateful if anyone could shed any light as I've been trying to get this going for a day and a half now and I'm about ready to give up!!
Many thanks,
Liz.

I had same requirement of displaying mutiple lines of workitem description. I used the following method for achieving my functionality.
Suppose multilineline text to displayed in the workitem description is:-
Line 1-> This is the the test text method to display description in the user defined format
Line 2-> which i want to show on my workitem to person approving the workitem.
Line 3-> Hello ,,,,,,,,,,,,,,,,,,,how are u .............................................test test hello test.
1> I stored the data in an internal table which has one field of type c length 200.
2> I appened the data line by line into the table so that data is not overlapped and my format is maintained.
i.e Data : t_text   type table of ty_text,
               w_text type ty_text.
w_text-line = Line1.
appen w_text to t_text.
clear w_text.
w_text-line = Line2.
appen w_text to t_text.
clear w_text.
w_text-line = Line3.
appen w_text to t_text.
clear w_text.
3> The internal table T_TEXT will have three lines of data.
4> Now pass this table as it is on the workitem Description.It will display text as per ur format on the workitem description dynamically

Variable is used in description text Task description, but does not exist

Hi,
I am getting following error in the standard task 207914 ERMS_DECSN.
Workflow Error
Variable &REQREQ.REQUISITIONERUSER.ITSDESTINATIONSY& exists in description text Task description, but not in the container
Message no. 5W146
Diagnosis
Variable is used in description text Task description, but does not exist in the container.
System Response
The task could cause workflow errors.
Procedure
Correct description text Task description or add the variable to the container.
Can anybody please guide step by step process to correct this error.
Regards,
Deepak

Hi Deepak,
I face a similar issue,Task description contains an element which is available in container, but during Check, it throws below error.
Variable &ZINFO.REASON& exists in description text Task description, but not in the container
but variable "&ZINFO.REASON&" is not accessed in Task description.
suggest any ways to check the binding or adjust binding between workflow/task.
Please provide a solution to fix this error or advice if this error can be ignored?

How to display task descriptions in shopping cart approval screen

Hi,
We are implementing SRM 7.01.
We'd like to display descriptions of shopping cart approval task,
which is defined in:
transaction: PFTC
in the 'Description' tab
Text type : 0120 Task Description
Currently only work item text is displayed in the UWL.
Does anybody now how to display descriptions?
Regards,
Mio

Problem solved.
I needed to do some settings in portal view.

Space in task description

Similar Messages

Maybe you are looking for