Spacebar Shortcut: Hand Tool Not Showing and Not Working

When working on a document (in PS cs6) and pressing the spacebar to quickly access the hand tool it doesn't do anything.
What I've tried so far:
resetting the presets
change the shortcut key (wasn't possible)
reinstall
googled
Any suggestions ?
PS: I'm aware there is a kinda similar problem for windows users which has been discussed here but there are slight differences between my problem and the one for windows users.

Try repeatedly hitting the H key and the Space Bar a number of times, each in quick succession.
I haven't gotten that since CS4, and at that time it was an older version of MS Entourage running in the background that was triggering the disabling the H key and the Spacebar to call up the hand.
If it doesn't work, you haven't damaged anything and lost only a few seconds.

Similar Messages

Spacebar Shortcut: Hand Tool Showing But Not Working

Runing the CS6 trial on a Windows 7 Laptop (x64). I was in Photoshop (64), and noticed that when I held down the spacebar to pan the open image, the hand icon would show but the tool will not work. No matter how many times I click and drag, the image stays still. If I select the MANUALLY select the hand tool it works, but the spacebar shortcut key is non-functional. This issue persists across both the 32 & 64 bit versions of Photoshop.
Ideas? Help?

Hello: I am using Photoshop CS6 and the spacebar will not function for me either.
I am creating a circle, duplicate the layer, then i select the subtract front shape ... after this i need to be able to use the spacebar to center my subtracting circle so thatt i end up w/a nice border.
I closed firefox but that didn't work and so then I restarted my computer w/out opening FF at all and still the spacebar will not work.
Rather than the hand icon appearing the only thing that changes is that the small black box that shows the height and width adds the x & y demensions.
Does anyone know if i need to turn something on or off in order to enable the spacebar?
Thank you for your time : )
Murph

Computer won't sleep when lid shut and battery icon not showing and not charging

hello, I've just come back from holiday and went to turn on my mac air that was sitting at home, and it was flat so i put it on the charge and today i see that the light was still orange and then i notice that there is no battery icon and when I'm at the password stage to log into my account there is a black cross over the battery icon and then once logged on it disappears. And also when the lid is shut, nothing happens the light stays on the apple logo and the laptop doesn't sleep. also the lights for the key board aren't turning on, please help

     Reset SMC.     http://support.apple.com/kb/HT3964
   Choose the method for:
   "Resetting SMC on portables with a battery you should not remove on your own".

Excise invoice is not saving and not showing datas

in erxcise invoice i ve made settings as per the sap best practices then also the excise invoice is not saved and not generated also
please help me to solve the problem
the error is coming like this
Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
i ve already maintainthe number range for this object in tool in tax in goods moment
please give some better advice for the excise invoice setting.

Sub Transaction type determines the subcontracting attributes and determines the accounts for the posting while doing a sub contracting transaction.
Sub transaction type is also used for determining the accounts while
doing excise removals.
Within CIN the account determination is based on the transaction type.
So normally you can have a single set of accounts for Excise
utilization. In case you need alternate account determination for
handling various scenarios you can define sub transaction types. The
sub transaction types and corresponding account assignments needs to be
maintained in CIN customization
To make customization of Sub Transaction type, goto
SPRO --> Logistics General --> Tax on Goods Movements --> India --> Account Determination and check whether you have assigned second and third one, viz. "Specify Excise Accounts per Excise Transaction and Specify GL Accounts per Excise Transaction".
Check
Taxes on goods mvnt--indiaaccnt determination---specify excise accnts for excise transaction...maintain the sub transction type , ip or 01,
against the appropriate ETT
Message was edited by:
sam masker

Why does my bookmarks toolbar start hiding my bookmarks when i add more bookmarks to the toolbar? how do i make all of them show and not have a drop down menu?

i had recently installed new firefox and instead of my 20 bookmarks showing up all in the 1 toolbar, only 10 are shown and the rest are hidden to the right with the ">>" button.
how the heck do i change it back to what i previously had? this is driving crazy! i want them all to show and not have to click the ">>" button and go through the drop down menu

Removes text associated with your bookmarks and folders and gives you placement controls over bookmarks extending the functionality and usability of the Bookmarks Toolbar. Your Bookmarks Toolbar is now very Roomy and Smart!
*https://addons.mozilla.org/en-US/firefox/addon/smartest-bookmarks-bar

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
Thanks,
Toks

Hi Toksyb!
You may want to try clearing out the PRAM on your computer. This process is explained through this article:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thanks for using the Apple Support Communities!
Cheers,
Braden

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?

I have problems with syncing my events folders från MacBookAir to Ipad2. Some pictures show and not others?
Anyone else having this problem?

Try deleting the photo cache from your computer and then re-try the photo sync and see if they then copy over - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

APs showing 'not associated' and 'not registered' in PI 2.1

I have got a weird issue in PI 2.1.0.0.87.
WiSM2, running on version 7.4.121.21, shows reachable and managed/synchronized in PI. However, the APs managed by it show 'controller IP->not associated' and 'not registered'. It is been confirmed that the SNMP/TELNET/HTTP creds are correct and all the APs in question are showing fully operational in WLC. When the user trying to delete the entry in PI, it always failed without any messages.
Any ideas why it happens?
Thanks!

Remove the controller and add again, see if the APs are reflected then
Troubleshoot using:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/1-2/user/guide/prime_infra_ug/troubleshootaps.html

Camera icon is not showing and mobile gets overheated quickly

The camera icon is not showing And I can't access camera and the device overheating quickly

You could simply access the camera by pressing and holding the camera dedicated key which is placed at the bottom of all other bottons. Was your device every exposed to water? That could also be a reason of heating up. But if no , then you should turn off your device and wait about 10-15 minutes. After that power on your device and change the screen brightness to automatic or lower the brightness . You could also turn off Auto-sunc Data , location NFC , bluetooth. I know that playing boom beach with maximum screen brightness will really heat up your device but i never had a situation where my camera get's closed beucause of the heat. I had warnings that the device is getting warmer . If its possible press dont show again and OK and if the message gets closed you should be able to take some pictures.

The Clear recent History Tool, locks up and (not responding) appears. A second attempt then works fine ??

<blockquote>Locking duplicate thread. 
Please continue here: [/questions/827453]</blockquote> 
the Clear recent History Tool, locks up and (not responding) appears. A second attempt then works fine ??

You're welcome
Clearing Cookies can cause problems because Firefox also asks plugins to clear their cookies.

My i pad air is tottaly not opening.. when i put it on charge. the charge icon is not showing and still not opening.. i plug my ipad air to my computer its not showing in itunes

my i pad air is tottaly not opening.. when i put it on charge. the charge icon is not showing and still not opening.. i plug my ipad air to my computer its not showing in itunes

Have you tried a soft-reset to see if it that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds after which the Apple logo will hopefully appear and it will boot up.
If that doesn’t fix it then have you got a different cable, and possibly charger, that you could try ?

I recently had to wipe my hard drive thanks to a download happy teen. In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said

In that process I lost my LR4 catalogs I was able to redownload the program but the catalogs are not there and not all of those pictures are on my external hard drive because same said teen decided they were going to borrow my external hard drive without telling me and "made room" on it. Is there a way to recover my catalogs? Please tell me there is because I was in the middle of working on a session when I had to wipe my drive and I would REALLY like to not have to go back and reshoot it. Any help would be wonderful!

It depends on how you wiped your drive. Depending on how you did it, only the directory was erased and the data can be found with drive recovery software. Some are free, although there is a small charge for most of them (~$30). You can usually download a trial version that shows if it will work and you have to pay to be able to save the found files. Use Google to search for the software. Different programs work differently and can find different things.
Good luck.
John

DSC alarm set and cleared without operator ack - the variable should be not alarmed and not acked

We are deeply involved in porting our application from 7.1.1 to 8.6.1 under Windows XP.
Our application heavily depends on DSC and moving from 7.1.1 to 8.6.1 is actually much more than a simple porting....
here is our last problem:
it seems that there is no discrimination between 'active' alarms and 'acknowledged' alarms on a shared Variable in case the 'ack Type' is set to 'USER'.
Here is what happens:
1) a Boolean shared variable is defined to be alarmed when 'high' (TRUE) and its ack type is set to 'USER' (the operator at our application must ack alarms).
2) the Boolean var is set to TRUE -> it is declared alarmed (OK)  and not ack'ed (OK)
3) the operator ack the variable -> it is declared alarmed (OK)  and ack'ed (OK)
4) the Boolean var is set to FALSE -> it is declared not alarmed (OK)  and ack'ed (OK)
5) the Boolean var is set to TRUE -> it is declared alarmed (OK)  and not ack'ed (OK)
6) the Boolean var is set to FALSE -> it is declared alarmed (NOT OK!!!)  and not ack'ed (OK)
7) the operator ack the variable -> it is declared not alarmed (OK)  and ack'ed (OK)
This last case is the wrong situation: an alarm has been set and cleared without operator ack the variable should be not alarmed and not acked
Actually the variable returns OK only when ack'ed.
see the attached project in which a small vi and a small shared variable lvlib allows to repeat the above steps.
Note:
A) same situation applies to 'double' shared variable
B) under DSC version 7.1.1 everithing was OK
can anyone Help?
Thank You Guglielmo Rozera
Attachments:
AlmAckTest.zip ‏18 KB

Thank for your replay!
I have tried to undeploy and deploy the library with ack type set to 'User' by default, and then run the vi but the behavior is always the same.
The modification you suggest does not set 'User' ack type because data socket needs '2' as 'User ' setting while property node needs '1' or (better) its own enumerated type.
Anyway I've corrected the vi according to your suggestion and tried again but nothing changed...
Here I attach the project modified with property node and an indicator to show what is the actual ack type
I hope in your further investigations!
Thank You
Guglielmo
Attachments:
AlmAckTest_2.zip ‏20 KB

Spacebar Shortcut: Hand Tool Not Showing and Not Working

Similar Messages

Maybe you are looking for