SpaceFM Error - Error: Unable to save session file. Permission denied

Hi.
I have just installed linux-rt from AUR
https://aur.archlinux.org/packages.php?ID=51360
Everything installed correctly and is working so far.
It's just that whenever I'm with a folder open (even if I dont do anything) and click the X to close the window, this error appears:
SpaceFM Error
Error: Unable to save session file.
Do you want to exit without saving?
( Permission denied )
I usually click yes and nothing happens - or seems to.
If it helps, I AM able to read, write, copy and delete files.
The problem ( I THINK ) seems to be just aesthetics AND/OR not affecting me at the moment?
Any thoughts?
Thanks in advance.
EDIT: In fact LOTS of issues just showed up...
1- Transmission doesn't resume downloads.
I closed it and opened again and there were no downloads and when I tried to start them again, there was an error saying: Unable to save resume file (or something close)
2- I just logged in (at the login screen, lol) as root and ALL problems disappeared, transmission saves things again, no more SpaceFM error etc.
Anyone has any clues what is this permissions problem ?? The whole OS is new and I didn't install anything, it wasn't supposed to be happening.
Last edited by AndreProgressive (2012-10-28 12:57:21)

Just stumbled on this, dunno about your other problems, but as far as your spacefm problem, go to ~/.config and sudo rm -r spacefm

Similar Messages

Cannot save numbers file, permission denied

Permission denied trying to save a spread sheet. Tried the repair permissions and nothing. I really do not want to reboot as I have spent too much ime working on the spreadsheet.

Chris,
Just ran into this same problem with Saving a pre-existing Numbers file under Snow Leopard / OS 10.6.8.
Solution for me was to notice, in the Finder, that weeks ago, I had previously moved the problem Numbers file into a locked folder that I was using to protect its contents from accidental changes. (The file itself was not locked!) I had forgotten that I had done this! "Insufficient permissions" or "possible full disk error messages" on attempts to save it resulted.
Try this: First, check if the problem file is locked in the Finder.
Select the Numbers file that is giving you trouble in the Finder,
then press Command+I to open its Get Info window
In the General section (NOT in the Sharing & Permisions section) check to see if the Locked box is checked.
If it is, Click it to uncheck and unlock the file
Close the Get Info window
If the problem file itself was NOT locked - follow this same procedure for the Folder in which it resides, as well as any folders above it in the Finder hierarchy.
Actually, if you just OPTION+CLICK on highest folder in which the problem file is nested, you will open it AND open all its sub-folders. If ANY are LOCKED you will see a tiny padlock icon over its lower left corner. Just unlock them as needed and you should regain full access to your problem Numbers file …assuming your problem had the same cause as mine.

OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.

Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel

How do I fix this error: DF024: Unable to preserve original file at ... Error 32 The process cannot access the file because it is being used by another process.(Seq 1352). ?

I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
Thanks

MelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue.

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

Unable to install any adobe products ERROR DF024 unable to preserve original file

Hi,
I was unable to install anything of adobe. When I install creative suit and update Photoshop I got this error.
I tried everything. Nothing worked. So I did a cleansweep of Adobe and restart. I tried installing a try version of Adobe Photo shop, but that will also not install....
How can I solve this? Thanks
Here is the error
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 5 error(s)
----------- Payload: AdobeColorCommonSetCMYK CC 5.0.0.0 {C4196275-B11A-40A1-8727-3C145C8F7D95} -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 21)
----------- Payload: AdobeColorCommonSetRGB CC 5.0.0.0 {C8DEBB29-3EB0-4B97-B652-4DE482B111BC} -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 11)
----------- Payload: AdobeColorPhotoshop CC 5.0.0.0 {5C5D62C9-91C6-415E-857E-9130C0F52C66} -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 3)
----------- Payload: AdobeColorVideoProfilesCS CC 5.0.0.0 {CE9B1B00-0421-4701-9698-1C14646D6D94} -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 5)
----------- Payload: Adobe Photoshop CC 2014 Core 15.0.0.0 {7C25E7A0-A0A1-4B87-BB30-BF0FBDC37878} -----------
ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Profiles" (Seq 6617)

I tried most of that, it is not a rights issue. The log is clear about the reason for failure, but adobe has no support on these...
The strange thing is that
This folder or file does not exist. /Library/ColorSync/Profiles/Profiles
So could that be the issue?
Here the failed installs....
DW050: - Adobe Photoshop CC 2014 Dutch Language Pack_AdobePhotoshop15-nl_NL: Install failed
03/26/15 16:58:04:017 | [WARN] | | OOBE | DE | | | | 13900 | DW050: - AdobeColorPhotoshop CC: Install failed
03/26/15 16:58:04:017 | [WARN] | | OOBE | DE | | | | 13900 | DW050: - Adobe Photoshop CC 2014 Core: Failed due to Language Pack installation failure
03/26/15 16:58:04:017 | [WARN] | | OOBE | DE | | | | 13900 | DW050: - AdobeColorCommonSetCMYK CC: Install failed
03/26/15 16:58:04:017 | [WARN] | | OOBE | DE | | | | 13900 | DW050: - AdobeColorCommonSetRGB CC: Install failed
03/26/15 16:58:04:017 | [WARN] | | OOBE | DE | | | | 13900 | DW050: - AdobeColorVideoProfilesCS CC: Install failed

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

I can't run visa interactive control window. ERROR MESSAGE: "Unable to open session "ASrl::INSTR" Status name VI_ERROR-RSRC BUSY Visa cannot curently access this resource.

I cant run tds220 (driver for oscilloscope).
Error message:
VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
Furthermore
I cant run Visa INteractive control.
Error message:
"Unable to open session to "ASRL1::INSTR" Return value 0xBFFF0072 Status name VI-ERROE-RSRC-BUSY . VISA csnnot currently access this resource."
Then change ports, this message appears for another port.
Thanks for answer.
Gita

The port is open by another resource. You note that you should also get an error if you try to access the port in hyperterminal. Try rebooting your computer and the first thing you try is opening a VISA session with Visa Interactive control(VISAIC).
If that fails, then you have a driver accessing your ports.
If it works then it was just two applications that were trying to access your port (LabVIEW and VISAIC are seperate apps even thought they both may be using VISA.)
Closing VISA sessions:
LabVIEW will only *automatically* close VISA sessions if you have this option set: Tools>>options>>Automatically close VISA sessions.
Otherwise you need to explicitly call a Visa close on the resource.

Output Designer 5.7 Errors - Error 1804 Unable to open configuration file

Hi...Receiving error messages on accessing newly installed Output Designer 5.7. Installed on new Win7 laptop.
Error # 5903 - You must select a Printer before saving.
Error # 1804 - Unable to open configuration file "....\Config\PDF.ICF"
The last error, Error # 1804, closes out the application. File does not exist within the path. Tried uninstalling and reinstalling with the same result.
Any help would be greatly appreciated!
Thanks,
Elena.

Hi Elena
This is most likely caused by missing admin rights on Win 7. I have seen this problem within my company.
When installing Adobe Output Designer it will be placed in %ProgramFiles% which is your C:\Program Files folder.
In subfolder C:\Program Files\Adobe\Output Designer 5.7\Config there are many configuration files that controls your printer drivers (Presentment targets). Dependent on what user type you are in Win 7 you might not have write access to files in this folder. When you cannot write to this folder you cannot make changes to your printer drivers or install new ones and you are pretty much stuck.
Solution: Create folder C:\MyPrograms and install Adobe Output Designer here.
Ståle

LOAD ALIAS ERROR - 1002000 - Unable to Open Ascii File

LOAD ALIAS ERROR - 1002000 - Unable to Open Ascii File
Edited by: sj0609 on Nov 23, 2011 11:18 AM

Just off the top of my head, have you tried doubling up the backslashes?
I have had problems getting an ASO alternate alias table loaded from MaxL at all (back in v9) but I didn't get the same error you do.

Keep getting archive errors. "ERROR: E_FILE unable to find md file: /Volume....

We have a Final Cut Server setup where after two weeks assets will automatically be archived to tape. Every so often I am getting error messages that state something similar to the following:
Job 404117 Archiving 214452_upload.mov needs attention. Please login and troubleshoot.
The error that occurred was:
"ERROR: E_FILE Unable to find md file: /Volumes/xsan/MEDIA/devices/video.bundle/3dd/00000000000203dd_md No such file or directory"
Naturally I will look at the directory path and will not see the file. When I search for that particular asset it will show up as online, but the "original media" is grayed out. Then there will be an exclamation point over the file cabinet (which says the file is online). So the media is missing. When I look at the log of the file, there will also be an email that was sent out to the creator saying that the file was ready for editing.
Any thoughts are greatly appreciated.
Eddie

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I'm receiving this error code every time I try to download Illustrator from iCloud.ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)

ERROR: DF024: Unable to preserve original file at "/Library/ColorSync/Profiles/Recommended" (Seq 22)

Lalahart please see Error DF024 installing Creative Cloud products | Mac which discusses this error.

Help!! - "The HP Scan Application was unable to save the file to the specified location."

New OJ6830, latest HP software installed on Win7 64 bit.
HP Scan scans and displays the scanned pages. But, when I try to save the file as a pdf or tiff, I get the following error message:
"The HP Scan Application was unable to save the file to the specified location."
BTW, I have tried running the app as Administrator and have disabled my antivirus software.
Why won't the HP scan app save the file? Has anyone else seen this error message?
Is there anything else I can do, or this this just a major bug in HP scan software?

Mike,
One Idea:
Make sure you have "San Preview" checked else the software will not accept "specified location".
Reference:
Save Scan to Specified Location
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

"The HP scan application was unable to save the file to the specified location. "

I can copy and print from my computer but when I try to save the scan I get an error message saying the HP app was unable to save the file to the specified location. I reloaded the cd and that did not help.

Hello jerlip, Welcome to the HP Forums. I see that you are having an issue when attempting to save a scan. I suggest that we try running the HP Print and Scan Doctor. If you see any error codes or messages, please let me know what they are. Write me back when you have time and I will be happy to research other options if needed. Cheers,

SpaceFM Error - Error: Unable to save session file. Permission denied

Similar Messages

Maybe you are looking for