Spacer column in Report
Hi Experts,
Could pls help me to create spacer column(Empty Column) in Report.
Thanks&Regards,
Sankara Reddy.
Dear Nsreddy,
For include Spacer Column (Empty Column) in Report, you have a different way,
One of then work with cell in BEx Query Designer within two structures, one in rows and the other in column.
The other hand in create a WoorkBook and embed two queries.
I hope those suggestion can help you son highline to answer your question,
Luis
Similar Messages
-
How to display space colums in report
Hi All,
I created one report, it have 21 columns.My table have 10 million records. I need only 5 Lacks records. My requirement is I need to add 4 space columns in that report.I am using Obi 10g.
Step1: In Answers, I implement case statement like CASE WHEN 1=2 THEN TIMES.YEAR or ‘ ‘ END.
Step 2: In RPD, I created new logical columns applied above case statement.
Step 3: In ETL, One new space column created, I import into the RPD and Pull into the report.
When I pull 4 columns into the report, it will not display the date and take more time but I remove those columns it will give data very soon.
Advance Thanks,
Thanks,
RajaHi Raja,
Have you tried just typing ' ' as the column formula in answers. I suspect using the case statement is resulting in the expression being pushed back to the database in an inefficient way.
Also shouldn't the statement be
CASE WHEN ... THEN ... ELSE ' ' END
Regards,
James
Edited by: James - Projected on May 28, 2012 2:34 PM -
Blank space in the report detail section
Hi ,
I have data for ten columns and after that i am getting a blank space, so my report is scrolling to right side without any data.How shall i remove the blank space.Any suggestions.For one more i am getting this only at the second page (Detail section)
Regards,
RajasekarThanks James for the reply,but i am not getting it correctly.
I have a year column which is the last column in my detail section.If i don't get any value for that year column then i am not getting these blank space at the right side of my report.If i have value for the year column then i am getting blank space double the times to my report detail section.
Any suggestions
Regards,
Rajasekar -
I need to Delete the empty space page of report
I need to Delete the empty space page of report
http://imageshack.com/a/img540/191/nrOwz6.jpg
I Need Help!!
ThanksHi yha10,
Per my understanding that you want to add one textbox at the bottom of the tablix and make it display as the last on each page after the tablix, you have try to add the page footer but if there is little record in the report you will got some space between
the report footer and the last row of the tablix, right?
If you don't want to display the space and I suggest you don't use the report footer and you can take reference to the details information below to display the information as the last row of the tablix on each page:
Right click the Details in the Row Group and select to Add Group-->Parent Group:
and add this expression in the Group By:
=Ceiling(RowNumber(Nothing)/10)
(10 is the number of rows you want to display on each page)
Right click the row group to select the "Group Properties" and add page break by check the "Between each instance of a group":
Right click the first column which the Group located and select the Insert Row-Inside Group-Below:
Select the Entire Column1(Group) and delete columns:
Merge the entire last Row and type the information "I need to show on all the page" in it:
If you still have nay problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Can we add a new column in report which is not in table.
Hi All,
Can we create a new column in report which is not in table.
I have two columns in my table completion_date, manufacture_date. If the difference between the completion_date and manufacture_date is 0, -1, 1 then the new column of the report will say on time against each record or else will display late. Any suggestion how to proceed on this
Regards
Edited by: User_Apex on May 16, 2011 5:54 AMStandard report then, NOT an interactive report (which if you were using, you could build a computation and report on that)..
Then the adding a column in the query would be your best best...
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead.
If this question is answered, please mark the thread as closed and assign points where earned.. -
hi experts,
i have a requirement that i need to develop a report which is same as t-code cs11,
but in cs11 we are getting the report for a single material and its bom components .
in my require ment i need to develop a report for range of materials, i almost did that but the problem i am facing
is how to obtain a blank space in alv report, after completion of single material and its components r displayed.
can any body pls suggest me.
thanks®ards
maheshlaphi srihari,
i tried that but the blank lines r appending at the end of internal table.
the following is the table ( t_main ) i am passing to the function module
LOOP AT T_STKO INTO W_STKO.
W_MAIN-STLNR = W_STKO-STLNR.
W_MAIN-STLAL = W_STKO-STLAL.
W_MAIN-STLST = W_STKO-STLST.
W_MAIN-BMENG = W_STKO-BMENG.
W_MAIN-BMEIN = W_STKO-BMEIN.
READ TABLE T_MAST INTO W_MAST WITH KEY STLNR = W_STKO-STLNR .
W_MAIN-MATNR = W_MAST-MATNR.
W_MAIN-WERKS = W_MAST-WERKS.
W_MAIN-STLAN = W_MAST-STLAN.
READ TABLE T_MAKT INTO W_MAKT WITH KEY MATNR = W_MAST-MATNR .
W_MAIN-MAKTX = W_MAKT-MAKTX.
APPEND W_MAIN TO T_MAIN.
CLEAR W_MAIN.
ENDLOOP.
can u pls send me some sampe code.
thanks. -
How to use the procedure column in reports
Hi all
How to call the procedure in reports as source.. If possible how to use columns of procedure in the layout column of report????Hi,
Your query is not clear.
1. In subject are you asking total column.
A. Edit pivot view and go to Rows and click Total BY option here you can find option like (none,before,after) the you can select after it will display total all culms.
2. I want use the columnC in columnD ? -- Am not understand.
A. What my understand is you want to see the report only C and D values only.
If it is correct we can apply filter in report level click column filed and apply not equal to A then it will show only C and D only.
If it is wrong pleas post me correct one with example. Will try to help out this.
I am not sure this is what your looking so far.
Award points it is useful.
Thanks,
Satya -
How to set value of a column in report region
Hi,
I have a report region based on a query.In this my first column is selectlist "select row" having to values "yes" & "No".
I have two buttons on top of the region "Check all" and "uncheck all".
My requirement is when I click check all button all rows corresponding to "select row" column gets selected to Yes and when I click No all rows gets selected to "No".
Thanks
VikramActully I want to set the value of a column in report region.
There are replies in the forum but in those the item is in form but not in the report region.
I am generating report region by using htmldb_item.selectlist and i dont know how to set value in these type of items. -
How to include variable in the text column in report painter?
Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AMHi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM -
How to add new column in report painter
Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
Additional Lead Column in Report painter
Hi Gurus
Please guide me how to add an additional Lead column in Report painter
Thanks
HirenHi HIren,
There can be only one lead column in report painter.
However within the one lead column you can identify more than one characteristic - e.g. cost center and cost element. You can then identify that both characteristics should be exploded.
If you go Edit > Rows > Explode, you have the opportunity of identifying which characteristic takes presidence over the other, and how they expand. So in this example, Cost center will be 1 and cost element will be 2.
The output will be dependant upon your report layout, but you should have the layout so that you have:
Cost Center A:
- Cost Element A
- Cost Element B:
- Cost Element C:
Cost Center B:
- Cost Element A:
- Cost Element B:
- Cost Element C:
And to distinguish the cost centers from the cost elements, you can format the cost center row "Color for Totals"
Regards,
Gaurav -
I want to hide a column in report 6i
hi
I want to hide a column in report 6i,
I used this code
function F_col_qty3FormatTrigger return boolean is
begin
if :color3 is null then
return (false);
else
return (TRUE);
end if;
end;
plz note that COL_QTY3 and COLOR3 both are from different table
and resulting gave this error
REP-1314 Format trigger 'F_col_qty3' reference column 'color3' at wrong frequency.You can format fields from a lower level group using fields from an upper level field, but not vice versa. This is because for the same upper level field there may exist several values of the lower level field. If this can not happen in your situation, there is no reason to place the fields in different groups.
-
How do I set individual properties for a column in report layout at runtime
How do I set individual properties for a column in report layout at runtime? I need to change this based on a user's input. This is for v10g.
I need to change either the "Read from File" attribute or the "File Format" attribute for one column based on the user's input. IS this possible?
Thanks in advance!Hi,
define 2 columns and use format triggers to show the one or the other column.
Regards
Rainer -
How to display top 2 countries in 2 columns in Report Designer
Hello Gurus ,
I have a requirement where top 2 countries has to be displayed in two different columns in Report Designer.
is there are way to do that, i tried many differetn ways but was not successfull, apart from creating text variables and writing customer exit.
I appreciate your help
Thanks,
KumarHi,
I am not sure what version you are, from version 9.3 I think there is a "Top" function, just highlight the row, tick the option for "Top", set the number and the column
Failing that if you need to use rank could you not hide the column.
Cheers
John
http://john-goodwin.blogspot.com/ -
Sorting based on two columns in report
Hi,
we have one issue on sorting based on two columns in report.
In the report we are doing sorting on two columns(week_id and stage_name). I have attached the screen shot for the same. The sorting is first done on the week_id and then on the stage_name. The issue comes when we have no data for the stage 1 - Prospect in W1. The stage goes to the second position.
Please suggest if there is any work around to show the 1 - Prospect stage in W1.
Regards,
Ambika Nanda.what is w1? where is screenshot? and is stage seoncd sort? if so what is the issue?
Maybe you are looking for
-
My wife received a new iPad Mini for Christmas-- when connected to iMac, icon appears in iPhoto sidebar; however, there appears to be no option to "unmount." Also, unlike my iPhone 4S whose icon appears in iTunes sidebar, the Mini does not. Any insig
-
List the storage location for all the plants
Hello How could I list all the storage locations of all the plants in single view. I have tried V_T001L but it is go plant by plant level. rgds Nile.Y
-
Solaris 10 Sparc and Oracle 11g DB with GG
Hi, I have Solaris system with Solaris 10 Sparc and Oracle 11g DB. From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10. I tried to Install but I am getting the following error.. $ ldd ggsci ldd: ggsci: ELF ma
-
I have a 5-GB ipod 1st gen (scroll wheel), and it seems to have died. It gives me the "sad ipod" icon, but it won't go into disk mode, as apple tells me to. I have but it in "diagnostic mode", and run all of the tests, and the only one that it fails
-
How to split video into chunks for web?
Hi all, I have a movie trailer that needs to be split into chunks for the web, to be played as a flash file, I have never done this, so my question is at what level do i do this, the timeline?, is there a program that does it?, can flash do it automa