Spaces Big Problem I need help badly!!

When I held down the mouse on the spaces icon in the dashboard i noticed an "options" choice which I selected. There I was offered to assign a hot key. I put in "Z" by mistake (meant to put in Option Z. Now I can't get rid of it so every time I try to type the letter Z up comes a spaces!!! So now I can't ever type the letter. I cannot find the preference to delete to fix this. I tried changing the hot key & it just accepts the new key BUT also keeps the old one. I've searched with spotlite but only find the pref pane not the preference itself. So what do I do? I'm trying to enter the registration key for Toast, which has a Z in it & I'm stuck.
Please help, help, help

Just so others will know if it happens to them. I spent over an hour with a very savy guy at applecare. It was a harrowing experience but he was determined to help without telling me to reinstall the system which I very much appreciated. Long story short after deleting almost all the plist prefs we finally found that the culprit was "Drag Thing"! I had assigned the Z via an option offered when I hilited the Spaces icon in the Drag Thing dock. By setting it there I could NOT get rid of it until I deleted the Drag thing prefs which are in a folder in the user library preferences. All is well now & I hope this may help someone else

Similar Messages

I have a big problem and need help.

I was trying to delete some files when I got a message that said that one of the files contained a program that was running. I close out the program and deleted the file but something happened. I closed out Windows Explorer and notices all my desktop and taskbar icons were gone and replaced by the Adobe Reader icon. I tried to run Google Chrome and it tried to open it with Adobe Reader. I then deleted Adobe Reader to see it that would fix the problem it didnt. Instead when I tried to run Google Chrome the second time it pulled up a window telling me to choose a program to open it with. I'm stuck and dont know what to do. The only program I can open is Windows Explorer now. PLEASE HELP!!!

See if this contains a solution for your problem: http://kb2.adobe.com/cps/860/cpsid_86069.html

Portege M900 cannot detect/read from DVD drive - Need help badly!

I have this problem with Portege M900. My laptop cannot read from the DVD drive.
Does any one has similar problem? Need help badly as I cannot play my game from the CD.

Test if the dvd drive is seated correctly in the compuer, I had a computer the dvd drive did not work until I removed one of the on back of the laptop (machine was a Toshiba different model) and then I was able to seat the dvd drive correctly.

HT4009 Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

Ok so my problem is I put $100 on my account an it not letting me buy in app purchases an I'm ticked off to the max an idk how to fix this I bough in app the other day perfectly fine I need help bad HELP me

You need to Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Need help badly!! how can i use the front camera i...

guys, i need help with the front camera of my device
how can i enable the front camera of nokia N900 to shoot photos or videos,
this problem is really bugging me...
need help badly...

You can't.. it is terrible..
the only app that really uses it is mirror
Open this link on your phone to install mirror
http://maemo.org/downloads/product/raw/Maemo5/mirror?get_installfile
the camera firmware is bad, so the image quality is truely terrible.. play with mirror to see.. it may be fixed in a future firmware release (it *IS* better than it was.. the firmware last year had a line through the picture!)

Adobe reader not working. Needs help badly!!

I get this error message and will not read or open my PDF files pissing me off Please read and why is this doing this and how
do I fix this. Not happy!!
My error messge I get. I need help badly to fox this !!
Adobe reader could not open micro niche 14 Internet Marketing (1) zip because it is either not supported file type because the file
has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
Can anybody Please help me !!!!!!!!!!!!!!!!!!!!!!!!!!
Michael Ladd and email is [removed]

Adobe Reader cannot open ZIP files. It only opens PDF files.

I need help badly with my ibook and palm pilot

Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
-NA

After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

After updating my iPhone 5 to ios 6.1 I'm getting a hissing sound during calls. Any one else having this problem? Need help

I am having the same issue. I am updating to 6.1.3 to see if that helps. It is really annoying. It seems to vibrate as well as hiss on my ear piece speaker while on a call. I keep looking at the phone thinking maybe another call is coming in.

Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

Hello, can someone guide me on how to purchase ExportPDF please? i'm currently residing in South East Asia and it doesn't allow me to purchase the software that i need for my work. Please guide me. i need help badly.

Hi watanabei,
Please see Countries where ExportPDF is available for purchase. - Adobe Community. It's necessary to have a credit card billing address in one of the countries listed in this document. If ExportPDF is unavailable to you, you may want to consider an Acrobat subscription, which would also allow you to convert PDF files to Word and other format. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

My ipad can't connect to itunes store.. need help badly :(

my ipad can't connect to itunes store.. need help badly :(

have you tried quiting the app, ie removing it from the multitasking bar also, and then retrying it? Failing that, flick the ipad into airplane mode for a minute, then flick it back, wait for your wifi to connect then try again.

MSI K7N2G-ILSR Problem! Need help!

Hi,i bought a K7N2G-ILSR last year when i was in Germany. This mainboard never worked as well... I wanted to work with Athlon XP 2500+ and Dual Channel 256MB+256MB=512MB 400 Mhz DDR-Ram. It hasn't worked when i first wanted to use and i changed the jumper to the securit mode than it worked but it has never opened with one button pushing.I was always trying to get screen vision with 3-5 closing and opening.One day i tried to get the jumper back and i tried to open but it never worked. I got the jumper securit again but again never worked. I tried everything but it never worked after that event. Normally i had to inform it at first and give it back or give it to the repairing but i couldn't have time. Now i have to do it this time. Now i want to change this or something else but in Turkey. I am living in Turkey and does MSI Support Centre change it or repair it? What can i do to get rid of this problem. Need help!
Thanks for your helps from now!

MSI K7N2G-ILSR Mainboard 11X166
AMD Athlon XP 2500+
2X256 MB PC 3200 Twinmos
OnBoard Graphic Card
Samsung 40 GB 5400rpm HDD
300 Watt Power Supply
I dont have more infos but i can find out if you want...

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

My new iPhone 4s and my iPad 1 have the same problem: While working on one of them, the screen goes black and the right back to home screen. I've tried resetting the iPad with no chages to this problem. Need help, this is anoying.

I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input.

Need help bad, screen problem

heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)

nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48)

Another Infinite Login Loop Problem - need help badly

Hello. I need help.
When I start up my iMac (24 inch last generation model) I can't log into the OS. When I enter my password I see the default OS wallpaper (nothing else) then it kicks me to a blue screen then right back to the login. Same thing over and over. I've already ran disk utility off of the install CD to repair permissions, etc... but no luck. This even happens when I enter into safe mode. I'm running the latest version of the OS.
Can anyone help me?

Restore the bootable backup/clone or Time Machine backup. Without one, you have a difficult situation. First thing to try is boot with your install disc, run Disk Utility, and repair the disk.

Lenovo B560 Battery problem! Need help asap

Hi, I have a big problem with my Lenovo B560.
Recently I started noticing the charging icon in the bottom right corner of the screen would go briefly from "charging" to the icon for "not plugged" (just the battery). If I moved the power cord a bit it would go back to normal.
Days later it happened again but this time a little more persistent. I didn't give it much attention. And then suddenly, last weekend it stopped charging altogether, despite being plugged. I tried different power sources, I tried moving the cable around, nothing. With the little time I had left before it completely discharged, I googled the problem and saw somebody in a thread saying "it's likely tha battery, it needs replacement", which made sense to me, since my laptop is 3-years old.
I ordered a replacement battery and waited. Today it arrived and I put it in, eager to use my computer and have everything going back to normal. I turned on the computer, battery was at 50% but it still did not charge. It showed the battery icon like before, as if it weren't plugged in. I moved the cable around again and noticed it would briefly flash back to being plugged. And then it stabilized on "plugged in, not charging" but it was suddenly at 3%. However, at least it didn't go down this time.
I tried reinstalling the Power Management Driver, restarted, everything was the same. Then I went to Device Management, I disabled the Driver and the icon dissapeared. Restarted, reinstalled driver once more, icon was still gone.
Then I noticed in another thread somebody recommended taking out the battery and turning on the computer with just the power cord plugged in. So I took out the new battery and turned it on with just the power cord. And it worked, and that brings us to the present moment. Both batteries sit next to me and my computer is currently working simply on the power that is supplied by the power cord.
Can anyone please tell me how to get out of this mess? My job relies greatly on this computer working, and I need to fix it asap. Any kind of advice is welcome. Thank you!

Update: the computer will not turn on anymore, not even with just the AC cord and no battery. Please help.

Spaces Big Problem I need help badly!!

Similar Messages

Maybe you are looking for