Spaces for Zeroes
Newbie alert!
I have a simple table with 4 elements per line comprising
A: description B: value C: quantity D: (B * C)
For each line A and B have pre-set values... I enter a quantity in C and it calculates a value in D
When C (quantity) is Zero I want a 'space' in both C and D.
This works fine until I actually enter a value in C, then change my mind and enter a space...
D assumes C has a value of 1 (??)
I'm looking for a function that says something like:
If either B or C = 'space' then D = 'space' else D=B*C
I can see functions that look as if they might work but I can't figure it out
If someone can point me in the right direction i'd much appreciate it.
Thanks
Thanks for the response Jerry..
I'm trying to understand why you would enter a space for zero.
Yep, when i read my explanation back it sounded more complex than it really is
I'm creating a 'picking' document that will double as an invoice - having zeroes in the quantity field doesn't make quantities >0 stand out - the finished form needs to be easily scanned so that the items that need to be selected can be quickly identified.
You can Conditionally Format the cells in D such that when the result is zero the font the color will be that of the fill, making the text invisible. You can also apply a test to see what is in B and/or C and set the result to a space, some other non-visible character or a null string.
I'm going to try this route... didn't realise you could change text colour and stuff, that opens possibilities... sounds like i could change the fill colour on lines with values in so that they really stood out from the 'unselected' lines... will give it a look - cheers
Similar Messages
-
To Display Space as Zero in the report output
Hi ,
We have a situation like there is no record in the cube for a particular date selection , the output in the report for the date shows as Space , now the question is how do we display Space as Zero in the query ouput.
We have the option to Display Zeroes as spaces .
Please help..
Thanks,
Sruthi...Hi Sruthi,
Can you try this.
Create Formula for each KF. In the formula definition just add key figure (Ex: if the keyfigure is KF1 then in the formula just drag KF1) and save it. Name this formula as your original keyfigure. Formula may return 0, if the keyfigure doesnt have any data.
Hope this helps.
Veerendra. -
Unable to view entries in FAGLL03 for Zero Balance Clearing Account
Hi experts,
We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting the foll message:
Account 19900000, company code 1100 is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 19900000 in company code 1100 as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
Regards,
SateeshHi
In splitting case you need not the give the line item display tab for Zero Balance Clearing Account.
Just remove that line item display in FS00 for Zero Balance account. You could be able to see the entries in FAGLL03
Regards
Sandeep -
Software Update Server - Deleting old updates to make space for new ones
On Page 77 of the SystemImage_and_SW_Updatev10.4.pdf Apple recommends "deleting old updates to make space for new ones". I've looked and searched and yet to find a way to do this. The Server Admin interface and the command line options I've looked into don't appear to provide this option.
So I actually tried stopping the server, moving the updates from /usr/share/swupd/html to another location, starting the server, the server wouldn't start, moving the files back again, the server still won't start.
1. Does anyone know how you're supposed to "Delete old updates to make space for new ones"
2. Does anyone have any suggestions as to how to get Software Update service running again?
Power Mac G5 Mac OS X (10.4.7)Does this article contain anything useful?
(16738) -
My 16gb iPhone 4S keep tell me that my storage is almost full and I don't have enough space for any upgrades. I don't have any music or videos on my phone. I deleted all old emails, texts, contacts and apps but still nothing. When I check my settings, I noticed that my Instagram is at 732mb and it keeps rising. Now it's at 814mb. Please help!!!!!
What is the precise wording of the message that is occurring?
Are you attempting to update via iTunes on a computer or over the air on the device?
How much free space is actually on the device?
If updating via iTunes on the computer, how much free space on the computer? -
hey iphone an iphone 3g and i only have about 13 apps and the yellow bar on itunes for my phone is way to big i deleted all my photos all my music every thing i ryed restoring ans all it still takes up space for sum reason ?? please someone help me
If Other (the yellow bar) is too big something is corrupted. The only solution (that I know of) is to restore from your most recent backup using iTunes (see http://support.apple.com/kb/ht1766).
-
Problem with Java Memory "Could not reserve enough space for object heap"
Hi gurus,
I am not an expert with Java´s configuration, and I have a situation that I don´t understand. First of all, I am working at Centos 6.2 with jdk_1.6 and Tomcat 7.
The problem is...
- If I run Tomcat with JAVA_OPTS="-Xmx128m"* (at catalina.sh) all works fine.
- If I run Tomcat with JAVA_OPTS="-Xmx512m"* (at catalina.sh) an error appears:
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
This appear when I run java -version or when I try to stop Tomcat, and the Tomcat isn´t able to stop.
The strange thing is that my server has more than 200M free in physical memory. So, why Tomcat isn´t able to stop? and Why Java doesn´t use the free memory in my server?
Thanks in advanced.Hello EJP, thanks for your answer.
I have explained bad.
The server has 703M free when Tomcat is stopped. I had mentioned that my server has more than 200M free in physical memory when Tomcat is running with JAVA_OPTS="-Xmx512m", so I don´t understand why these errors appear.
Do you understand me?
Recently I have checked the swap memory, and it is disabled. In spite of swap memory is disabled I think java wouldn´t need this memory because it has free physical memory
Thanks again. -
How to prevent creation of billing docs for Zero Quantities
Hello everyone,
Could someone please help me with this.
We have some invoices created with 'zero' quantities. We need to stop prining invoices for the invoices with zero quantities. Can we stop creating invoice for zero quantities. if yes , please let me know how. Any help is very much appreciated.
many thanks
Edited by: Simsasha on Jan 30, 2009 2:31 AMDear Simsasha,
Could you please breif whether:
1. Its Order-related-Billing, OR
2. Delivery-Related Billing
If, Its Order-related-Billing, You need to work-around Copy-Control Setting in VTFA; and if,
Its Delivery Related-Billing, You need to work-around Copy Control settings in VTFL.
You need to write Code to check Quantity = 0, and attach the same within Field: Data VBRK/VBRP; to check and avoid Invoice creation, if Invoice-item has billed quantity as 0.
You may work with Program RV60AFZC USEREXIT_FILL_VBRK_VBRP
Best Regards,
Amit
Note: You may take help from the discussion from following thread:
[Billing with Zero Quantity, not allowed|Re: Billing for zero quantity is being allowed]
I hope, this would definitely help you, some extent. -
I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.
What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
Cheers, Tom -
itunes is copying/converting 500gb of music from .wma to .m4a files that are on an external drive onto my laptop which doesnt have enough room. how do i reroute these newly converted files somewhere with enough space for them?
new to itunes, used windows media player before that and always ripped music directly to an external hardrive and accessed it through the player. now that i downloaded itunes it is taking from the external hardrive and copying a second file for each song onto my lap top hard drive which does not have the capacity for all my music. as itunes converts music files i want them saved back onto my external drive or another location i have space for rather than the lap top. how do i change the setting to move the itunes media folder to another location. assuming that hitting copy and past and dropping it in a random location will cause a few errors.When I have done this, all I did was network the two machines and copy the contents of the iTunes folder to the other machine, and that's it.
My understanding (which may not be 100% correct) is that the one file that is absolutely necessary is iTunes Library, and that the XML file is actually a copy auto-generated from the iTunes Library, appearing in a different format only for non-iTunes apps that take advantage of the iTunes Library data.
As far as I know, if you simply have the Library (database) file and all your original music files, iTunes on that computer should operate as it did on your old computer. I believe that the Album Artwork, Genius Data, and XML files can be regenerated from the Library file. Not sure about the Extras file. -
Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
When we click Retry, the server starts up OK.
There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
There is also free disk space available on the host and for the VM with the disk errors.
This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
- We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
- The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
- There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
- There are 6 CPUs
- There is 20GB of RAM (memory)
- The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
My question is this:
If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
How do we prevent this issue from happening if we don't know the underlying cause?
I would greatly appreciate any advice or suggestions.
If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
Thanks all,
KurtThe type of storage is really based on your requirements, and your ability to withstand downtime.
iSCSI as you are using with a NAS such as Synology or QNAP. NAS Selector - Support - Synology - Network Attached Storage (NAS)
I wouldn't use iSCSI for Exchange or any database. It's a bit slow.
Do you have a single physical host? Then I'd probably to an external direct attached storage. This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
We used to use a HP P2000 (on old G1), but it's since been retired. Worked pretty well once firmware was upgraded. http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features. They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
Recommendations:
Use RAID 6 with your large disk arrays. With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
Use slower 7.2K disks in RAID6 for file storage.
We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300. It's extremely fast with about 50 virtual servers, but was quite an investment. One thing we don't have to worry about is down time. If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
Our VNX has 3 tiers of performance. 3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks. A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare. The third is a bunch of 7.2K 3TB disks in RAID6. The VNX autotiers, placing data on disks depending on where it's needed. The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it. I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
D -
Firstly, I can't open iPhoto on my macbook as of a few days and could it have anything to do with a problem I have updating my iPhone's software as I've downloaded extra iCloud storage but I still can't get the iPhone to recognise the space for software
No. With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you see when iPhoto opens?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
For the iPhone issue ask in the iPhone forum.
OT -
How do I get the music back on my iPhone after manually deleting it from the device (to get space for photos/videos)? I can sync with iTunes but it doesn't copy these songs back, even though they still appear in my iTunes library. I can click on the Music link under 'On My Device' in iTunes and the missing songs all appear to still be on the device, but they are not. I normally delete using iTunes and do not have this issue. This time I was out and needed more space to shoot photos and videos so I removed a lot of music from my phone through the Music App.
The songs I'm trying to reload on my phone are on my PC. These we had loaded into iTunes. I can remove them all from the library and then add them all back one by one I imagine. The problem I'm having is that I removed them manually from the phone, they still appear in iTunes music library yet they won't sync. I don't want to take the time to compare the phone to my library, remove from the library what's missing on the phone and then add them all back again. 64GB (mostly music) will take a while.
-
Hello community,
I used to have storage problems on my phone, and chose to delete WhatsApp since it consumed nearly a whole gigabyte on my phone. I thought that through deleting it and reinstalling, it would get rid of the overload of data and start fresh. However, once I got to the page to restore from a back-up of my messages, I didn't have enough space on my phone. So I did further research into how to free up some space (turned out I had a lot of deleted photos hiding in my phone which should've been totally gone) and managed to get nearly 500 MB free. So I went back to my WhatsApp app, and tried to restore the back-up since it says the size of the back-up is 360 MB. However, it still gives the following error message that it had given me before:
"Sorry, there isn't enough room on you iPhone to restore from your iCloud backup. Make room by deleting existing videos or photos and try again."
I didn't (and still don't) understand why it says there is no room on my phone even though I had about 450 MB free. I have tried switching my phone off and then back on. Still, I get the same message. I have also tried deleting WhatsApp again and re-installing it but still I get the same message, still when I have enough room on my phone. By now, I have already consumed my storage on other apps so I don't have much space left anyway, making the error message reasonable.
I would really appreciate if anyone could just throw me some possible solutions that could solve the problem of WhatsApp not recognizing that I've got enough space for it on my iPhone to restore all my messages. I would like them back because I have some important and nice message threads I would love to have retrieved. Remember, I have already tried switching my phone off and back on and also deleting WhatsApp when I had sufficient storage. Currently I don't have enough storage, which makes sense for the error message to appear, but if anyone gives me a possible solution I will make way for enough storage and try the solution.
Also a weird thing is that at first, I still got notifications of messages people sent me through private chat (so not group chat). I don't know what it exactly means, but hopefully that helps with finding a solution.
If you think that I might as well post this question on a WhatsApp forum, please tell me, because it does indeed seem like it lies on the app and not my phone.
Thank you all anyway for reading and wanting to help.
Shaynidw.Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page -
Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase
Hello,
We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
Any advice will be appreciated.
Best Regards
FranciscoHello Paul,
There is no db2diag.log. We are in the first steps of the installation.
Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
This is the CEDBMIG.log
INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
INFO 2010-08-04 10:12:01 Main
Preparation successfully completed.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
The process lsattr puts out:
realmem 8388608 Amount of usable physical memory in Kbytes False
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
Physical RAM size is 8192 MB.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
Retrieving swap space size ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsps -s ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
Total Paging Space Percent Used
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
8192MB 1%
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
Currently activated swap space is 8192 MB.
INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
The installation phase is starting now. Please look in the log
file for further information about current actions.
INFO 2010-08-04 10:12:31
Requesting Installation Details
INFO 2010-08-04 10:12:31
Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
INFO 2010-08-04 10:12:31
Select the DB2 Storage Management.
INFO 2010-08-04 10:12:31
Choose the number of storage paths for DB2's Automatic Storage
Management.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:31
Requesting Information on CD-ROMs
INFO 2010-08-04 10:12:31
Calculating RAM Distribution
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Dispatcher
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Secure Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Message Server
INFO 2010-08-04 10:12:31
Creating the SAP Administration Group sapsys
INFO 2010-08-04 10:12:32
Creating the Database Administration Group db<dbsid>adm
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>ctl
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>mnt
INFO 2010-08-04 10:12:32
Creating the SAP connect user
INFO 2010-08-04 10:12:32
Setting Password of the SAP connect user
INFO 2010-08-04 10:12:32
Creating the db2<sapsid> User
INFO 2010-08-04 10:12:32
Setting the User Password
INFO 2010-08-04 10:12:32
Creating the SAP System Administrator
INFO 2010-08-04 10:12:32
Setting Password for for the SAP System Administrator
INFO 2010-08-04 10:12:32
Creating Directories
INFO 2010-08-04 10:12:32
Creating Symbolic Links
INFO 2010-08-04 10:12:32
Getting Minimal Size of the Database
INFO 2010-08-04 10:12:32
Changing DB2 UDB for UNIX, Windows Tablespace Data
INFO 2010-08-04 10:12:32
Checking if Required Directories Exist
INFO 2010-08-04 10:12:32
Checking Available Space for the SAP Instance
INFO 2010-08-04 10:12:32
Checking Available Space for the DB2 UDB for UNIX, Windows
Tablespaces
This is the CEDBMIG.R3S log
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@DB_HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@DB_HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@DB_HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
100_GROUP=sapsys
100_OWNER=@LOWER_SAPSYSTEMNAME@adm
100_PERMISSION=0644
100_SOURCE=@HOME@/.login
100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
110_SOURCE=@HOME@/.login
110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
120_GROUP=sapsys
120_OWNER=@LOWER_SAPSYSTEMNAME@adm
120_PERMISSION=0644
120_SOURCE=@HOME@/.cshrc
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_R3DIRECTORIES_IND_IND]
101_PATH=@SAPDIR@
101_PERMISSION=0775
101_SET_FILE_ATTRIBUTES=YES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_PATH=@SAPDIR@/tmp
103_PATH=@SAPDIR@/trans
104_PATH=@SAPDIR@/trans/tmp
104_SET_FILE_ATTRIBUTES=NO
105_PATH=@SAPDIR@/trans/EPS
106_PATH=@SAPDIR@/trans/EPS/in
107_PATH=@SAPDIR@/trans/EPS/out
108_PATH=@SAPDIR@/trans/EPS/log
109_PATH=@SAPDIR@/trans/bin
110_PATH=@SAPDIR@/trans/buffer
111_PATH=@SAPDIR@/trans/cofiles
112_PATH=@SAPDIR@/trans/data
113_PATH=@SAPDIR@/trans/etc
114_PATH=@SAPDIR@/trans/log
115_PATH=@SAPDIR@/trans/sapnames
120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
120_PERMISSION=0751
120_SET_FILE_ATTRIBUTES=YES
121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
121_PERMISSION=0755
122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
131_PERMISSION=0775
132_PATH=@SAPMOUNT@
140_PATH=@SAPMOUNTEXE@
141_PATH=@SAPMOUNTPROFILE@
141_PERMISSION=0755
142_PATH=@SAPMOUNTGLOBAL@
142_PERMISSION=0700
150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
160_PATH=@STARTDIRECTORY@
160_PERMISSION=0777
[Z_R3DIRPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNT@
101_PERMISSION=0755
101_TRAVERSE=
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0710
103_TRAVERSE=
103_USERGROUP=db@LOWER_DB_SID@adm
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
105_PERMISSION=0755
105_TRAVERSE=
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_TRAVERSE=
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0777
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
130_CHANGE_ON_NFS=NO
130_PATH=@STARTDIRECTORY@
130_PERMISSION=0777
130_TRAVERSE=
130_USERGROUP=sapsys
130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
140_CHANGE_ON_NFS=YES
140_PATH=@SAPDIR@/trans
140_PERMISSION=0775
140_TRAVERSE=
140_USERGROUP=sapsys
140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
141_CHANGE_ON_NFS=YES
141_PATH=@SAPDIR@/trans/bin
141_PERMISSION=0775
141_TRAVERSE=
141_USERGROUP=sapsys
141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3FILEPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNTEXE@
101_PERMISSION=0755
101_TRAVERSE=SUBDIRECTORIES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=FILES
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0700
103_USERGROUP=sapsys
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=SUBDIRECTORIES
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPMOUNTPROFILE@
105_PERMISSION=0755
105_TRAVERSE=FILES
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
106_CHANGE_ON_NFS=NO
106_PATH=@SAPMOUNTEXE@/saposcol
106_PERMISSION=04755
106_USERGROUP=sapsys
106_USERNAME=root
112_CHANGE_ON_NFS=NO
112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
112_PERMISSION=0751
112_TRAVERSE=SUBDIRECTORIES
112_USERGROUP=sapsys
112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
113_CHANGE_ON_NFS=NO
113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
113_PERMISSION=0751
113_TRAVERSE=FILES
113_USERGROUP=sapsys
113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
114_CHANGE_ON_NFS=NO
114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
114_PERMISSION=0755
114_TRAVERSE=SUBDIRECTORIES
114_USERGROUP=sapsys
114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
115_CHANGE_ON_NFS=NO
115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
115_PERMISSION=0755
115_TRAVERSE=FILES
115_USERGROUP=sapsys
115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
116_CHANGE_ON_NFS=NO
116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
116_PERMISSION=0755
116_TRAVERSE=SUBDIRECTORIES
116_USERGROUP=sapsys
116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
117_CHANGE_ON_NFS=NO
117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
117_PERMISSION=0755
117_TRAVERSE=FILES
117_USERGROUP=sapsys
117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
118_CHANGE_ON_NFS=NO
118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
118_PERMISSION=0775
118_USERGROUP=sapsys
118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0700
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3LINKS_IND_IND]
101_LINKCONTENT=@SAPMOUNTEXE@
101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
102_LINKCONTENT=dbg
102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
103_LINKCONTENT=@SAPMOUNTGLOBAL@
103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
104_LINKCONTENT=@SAPMOUNTPROFILE@
104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
[Z_SAPDATAPATH]
S1=/db2/@SAPSYSTEMNAME@/sapdata1
S2=/db2/@SAPSYSTEMNAME@/sapdata2
S3=/db2/@SAPSYSTEMNAME@/sapdata3
S4=/db2/@SAPSYSTEMNAME@/sapdata4
S5=/db2/@SAPSYSTEMNAME@/sapdata5
S6=/db2/@SAPSYSTEMNAME@/sapdata6
SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
Regards
Maybe you are looking for
-
Shared folders (Windows file shares) show access denied and do not prompt for credentials
Scenario: Like other admins, I log on and work as a 'standard user' (usera) with no admin rights anywhere in the domain, to perform admin tasks I have another account (userb) which I authenticate with as and when required. userb has been allocated/de
-
Missing entries in report painter report
Hi, I'm using report painter for P&L and Balance sheet. The report uses table GLPCT. There is an entry for downpayment made which is posted to a downpayment account and the other effect to the vendor (with an alternative recon a/c). Both the downpaym
-
How to change the baudrate for NI-USB 8473
There is a problem about my NI-USB 8473, High speed CAN device. I have a excuted file to operate this CAN, programmed by CVI, but i dont have the source code. It works all fine when i want to change the baudrate. But i have to develop a new prj for t
-
Setting Acrobat 7 as my default
I have both Acrobat 5 & Acrobat 7 on my machine. I keep getting 5 as the default in web browsers (safari, firefox, netscape) and when opening .pdf files. How do I force everything over to 7? Note: I have a machine that boots into either OS 9.2 or 10.
-
Rotate Photos in Premiere Elements 9
I created several photo slideshows on Adobe Photoshop Elements 9. I went to create a DVD with Adobe Premiere Elements 9 with slideshow to be a chapter. When the slideshows were moved into the Adobe Premiere Elements 9 to create menus and burn the D