Spaces -- Have to restart service after restarting system.
Whenever I reboot (or log out and back in) I can't change Spaces. I have Mail set to always be in a different space, it goes there, does its thing, but I can't move to its space. I have to disable and then enable Spaces to get it to work. EVERY TIME I reboot.
Does anyone else have this problem? Even better, anyone have a solution?
Thanks.
Anyone?
Similar Messages
-
Is it true that MacBooks have to have their batteries " serviced " after 3 years
Is it true that MacBooks have to have their batteries " serviced " after 3 years- if so, where would I get it done?
It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.
Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information from the top of the page back here. -
Completed disk 1. Disk 2 requested. I inserted disc 2 which immediately prompted a restart. After restarted, nothing happened. How can I tell if its done?
you could launch pse 10 and see if all's well.
-
Have to restart VPN service after restarting macmini
Hello,
i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
If you need further information please reply, i will hand it in immediately.
FYI:
I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
kind regards
MarkoHello,
i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
If you need further information please reply, i will hand it in immediately.
FYI:
I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
kind regards
Marko -
Restart services on linux system
Hi guys
i need to work in online mode using my local administrator tool of BIEE like Using the Administrator tool that is installed on the testing calculator under linux system.
I have already created, under my local system windows, the dsn system for the BI server using the IP address of the testing calculator in wich is installed the oracle BI that i want to use; under linux system.
After I try to open Online project using the DSN System previously created and all is ok! I'm able to see the samplesales default project.
After i created, on my local administrator tool, an .rpd (also setting security--> user--> setting a password) project and after i put this under the OracleBI/server/repository directory of the testing calculator.
Now i think that if i try to connect, using my local administrator tool, to administrator tool of the testing calculator i can see my .rpd but it not work. I'm not able to see this project.
Maybe i need to restart services under the testing calculator(linux system)?
If the answer is yes, how i can do this under linux system??
I have the IP address, user and password to logon in this system but i don't know the name of the services that i have to stop and restart in linux system.
The services that i have to stop and restart are:
-BI server
-Presentation server
- java host
-oc4j
What are the name of these services and under which directory are them, in a linux system?
I attempt to make a workaround to reach my goal but don't work!
I did the follow steps:
1) MAde a backup copy of the samplesales.rpd that i already found, like a default, under OracleBI/server/repository directory of the testing calculator
2) i opened the real (not a backup) samplesales.rpd on my local administrator tool, using online mode
3)deleted all, physical - business and presentation layer
4) save
5) try to reconnect
6) receive the errors "Repository star has not catalog" and another that i don't remember with code "37001"
7) panic :-()
8) replace the empty samplesales whit the backup copy in order to restore the initial situation
9)try to reconnect on the adminiustration tool, using online mode
10) receive the errors "Repository star has not catalog" and another that i don't remember with code "37001"
11) panic and desperation :-()
Furthermore,i could also access to web application, in the answer, to see the samplsales subject and try to do a report or some segmentation but now i cannot to logon on the web application because i receive the same error *"Repository star has not catalog" and another that i don't remember with code "37001"*
What i can do to restore the initial situation in the testing environment?
Thanks in advance
Best reguardsHi,
To start and stop all the services
Oracle BI Server
./OracleBI/setup/run-sa.sh start
./OracleBI/setup/run-sa.sh stop
Oracle BI Presentation Server and Javahost
./OracleBI/setup/run-saw.sh start
./OracleBI/setup/run-saw.sh stop
OC4J
./OracleBI/oc4j_bi/bin/oc4j -start
./OracleBI/oc4j_bi/bin/oc4j –shutdown –port 23791 –password
If you want to use the original files, first shut down all the services.
Take the original webcat and the .rpd file on your test calaculator. Check you instanceconfig.xml and your nqsconfig.ini on the test calculator. They should both point to the samplesales.
For more information check:
NQSConfig.ini and instanceconfig.xml
If you are sure everything is back to the original, start the services again en check the result.
Good Luck,
Daan Bakboord
http://obiee.nl -
I have no data service after io6? Anyone know a solution?
As in no 3G or edge. Can't send texts.
I have the same problem after upgrading to IO 6 on my iPhone 4S, and I think I figured out a fix!
Go to:
Settings > General > Cellular > Roaming > Data Roaming ON
It looks like after the upgrade it thinks I'm roaming and restricted data over 3G. Not sure if this will impact my phone bill (theoretically it shouldn't, since I'm not in roam), but we'll see.
Hope this helps! -
Error restarting services after deploying a RPD.
Hi all,
I have recently performed OBIEE installation and, when a repository is deployed and all services restarted comes an error like this one and BI Server status is down:
Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obis1; msg 0 of 1 processes started.
OBIEE version is 11.1.1.6 and the unique RPD that works is the sample one, any others fail during the restart process.
I have been thinking that maybe it was a logging error but I am not sure due to the last actions I performed, which have been those:
- Create a new user in the Console
- Create a new repository and give the username created before and its password.
Can you help me please?
Regards,
Borja M.Think this may be the wrong place to be posting the question about BI
-
Exposed web services after restart of AS disappear
hi,
i create web services from the CAF application service. Then i deploy it with the whole CAF application to the AS. I can see and test the web service through the web services page in the portal.
But when i restart the AS the deployed web services dissapper! Has anyone experienced such a problem?
I am using the trial version of Netweaver CE 7.1The problem does not appear any more. Don't know why.
-
Additional info: I didn't allow the update, it just happened... it's supposed to ask permission, according to my settings.
I haven't synced my iPhone 4s in more than a week, so the library on iTunes/in my computer is not an exact match for my phone.
I am running Windows 7 Starter on an Asus netbook.Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
I have a 2nd Gen iPod nano, iTunes 7. As soon as I sync my ipod I can no longer communicate with it through iTunes. This is frustrating. Should I return it and wait a few months for this to all get worked out?I just bought it Monday and it's been a headache. Any advice. This is all new to me.
PC Windows XPI had to enable Terminal Services in Windows XP. Once this was done my connection problems disappeared.
-
Anybody have experience of service after guarantee/Apple care expired.
I am plaining to get a MacBook Pro, but what afraid me is that if the Apple care/guarantee has expired, as I have an experience with my iPhone of being refereed to a third party service center. That was not a good experience one, as they didn't do a proper job to my iPhone.
Yes! i have had my screen replaced 3 times,just before the warranty ran out,and i knew that it would happen again, (even has i am typing this out its happening again) I was given no choice but to buy this Apple Care Plan. My question is what happens after 3yrs. In my country England you just keep on paying the insurance every year. If you do not have any insurance, Say, on a washing machine you call the guys out to fix it, they tell you the price before they begin. You are better off buying a new washer, because of the price they charge. I know for definate after 3yrs thats it,and say if you had to get your screen replaced it would cost you £400 plus carriage,and that comes to about £500. You might as well buy a new computer. Unless anybody can come up with a better answer to this i would love to know.
Kettle4 -
Interval Since Last Panic Report: 12958 sec
Panics Since Last Report: 4
Anonymous UUID: D945D588-F525-4E6B-8DB6-77A34BDBD6DA
Sun Jul 31 17:32:47 2011
panic(cpu 0 caller 0xffffff80002c268d): Kernel trap at 0xffffff7f811a637a, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000001c8, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x0000000000510000, RBX: 0x0000000000000008, RCX: 0x0000000001510000, RDX: 0xffffff800bd29808
RSP: 0xffffff8076bf3f60, RBP: 0xffffff8076bf3fb0, RSI: 0xffffff800db09af0, RDI: 0xffffff800bd29808
R8: 0xffffff7f81fb572f, R9: 0x000000000ad8b189, R10: 0x0000000001ff0100, R11: 0x000000000001ff01
R12: 0x0000000008000040, R13: 0x0000000010000000, R14: 0x000000000e000040, R15: 0xffffff800bd29808
RFL: 0x0000000000010246, RIP: 0xffffff7f811a637a, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000000001c8, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8076bf3c20 : 0xffffff8000220702
0xffffff8076bf3ca0 : 0xffffff80002c268d
0xffffff8076bf3e40 : 0xffffff80002d7a3d
0xffffff8076bf3e60 : 0xffffff7f811a637a
0xffffff8076bf3fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOSerialFamily(10.0.5)[9EF0ADC7-7D42-38C6-9BD8-185CB717F80E]@0x ffffff7f811a5000->0xffffff7f811b2fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1633059019664
last loaded kext at 1623157865961: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f8079c000, size 36864)
last unloaded kext at 1393757240736: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f8079c000, size 36864)
loaded kexts:
com.ZTE.driver.ModemDriverMacEx 1.0.6d1
com.apple.driver.AppleIntelProfile 81
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AppleMikeyDriver 2.1.1f11
com.apple.driver.AGPM 100.12.40
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.driver.AppleLPC 1.5.1
com.apple.GeForce 7.0.2
com.apple.driver.AppleMuxControl 3.0.8
com.apple.driver.AppleIntelHDGraphics 7.0.2
com.apple.driver.AppleIntelHDGraphicsFB 7.0.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.driver.AppleIRController 309
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.driver.AirPort.Brcm4331 500.20.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.nke.ppp 1.7
com.apple.driver.AppleProfileTimestampAction 81
com.apple.driver.AppleProfileThreadInfoAction 81
com.apple.driver.AppleProfileRegisterStateAction 81
com.apple.driver.AppleProfileReadCounterAction 81
com.apple.driver.AppleProfileKEventAction 81
com.apple.driver.AppleProfileCallstackAction 81
com.apple.iokit.AppleProfileFamily 81
com.apple.driver.DspFuncLib 2.1.1f11
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.driver.AppleHDAController 2.1.1f11
com.apple.iokit.IOHDAFamily 2.1.1f11
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.0.2
com.apple.NVDAResman 7.0.2
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.kext.triggers 1.0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.6)
Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK3255GSXF, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 4
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Virtual cube with services after copy system from PRD to SBox
Hi
I have problem.
The Virtual cube 0FIGL_VC1 with FM "RS_BCT_FIGL_DATA_GET_VC1"
works well on PRD but not on SBox.
I think, i did everything on SBox in t-code SM59, WExx.
Infopackages load data from connected (not R3-PRD but R3-SBox) system perfectly.
What I must do with this virtual cube so that it works well ?
RegardsHi Adam
FM "RS_BCT_FIGL_DATA_GET_VC1"
takes data from basic cube "0FIGL_C01" not from R3
See t-code se37, tab "Import" and parameter Name "I_BASIC_INFOPROV".
If you have a problem with charging data, see this parameter
or rather basic cube and data transfer to this cube.
Regards
PWnuk -
Installation problem of iTunes 6.0.4 - Can"t proceed after restart
I just had to download and re-install iTunes on my Powerbook G4 due to a hard drive crash. I am currently in 10.4.5. I downloaded iTunes from Apple's sight and started the install. Everything went fine and the computer did its mandatory restart. After restarting there is no evidence of iTunes anywhere on my hard drive. So I try to reinstall it from the installer and all the items are ghosted out saying skip. When I try to proceed it says there is nothing to install. I tried verifying/repairing Disk Permissions with Disk Utility and nothiung showed up. Any help would be greatly appreciated. Thanks.
When I try to proceed it says there is
nothing to install. I tried verifying/repairing
Disk Permissions with Disk Utility and nothiung
showed up. Any help would be greatly appreciated.
Thanks.
I believe I have the answer -- at least it worked for me. With a huge assist from Apple Tech Support, I finally came up with with the following...
Go to Finder > Hard Drive > Library > Receipts. There you will find four files starting with iTunes. Remove all four to the Trash. Empty it. Restart your computer. And then the Install program on the virtual drive will work and you'll get iTunes 6.0.4.
Hope that helps.
Regards,
Richard Mackenzie
www.MackenzieProductions.com
Power Book G4 - 17 inch Mac OS X (10.4.5) -
How to stop youtube videos from playing after restart
every time I restart firefox (currently 24.1.1 or 14.0.1) any tabs with youtube videos start playing and I have to wait until after restart is complete before I can find it/them.
is there a way to stop this?I don't know of a way to stop auto-play on restart only. There are some extensions that can stop auto-play in general (i.e., all the time). I haven't tried any of them myself, but it looks as though these might help:
* [https://addons.mozilla.org/En-us/firefox/addon/smartvideo-for-youtube-mytube/ SmartVideo For YouTube]
* [https://addons.mozilla.org/En-us/firefox/addon/stop-youtube-autoplay/ Stop YouTube Autoplay] (updated version not yet reviewed)
Maybe you are looking for
-
TS1538 My iphone 5s won't show up on my itunes
My phone does show up on windows when I plug it inbut not in iTunes. I've tried everything that it says to do under support as well as uninstalling itunes and reinstalling it but it still won't show up. Is anyone having the same issue? I'm using the
-
I downloaded the new iOS 5 ....lost most of my apps ..restored them...however the kindle books app does not allow me to open books previously purchased from Amazon...the books are shown in the archive,but will not open when placed in home...a mesage
-
IOS 5.1.1 update wrecked my phone, can anybody please help?
Hi there, I plugged in my iPhone 4S into iTunes, and it tells me that there is an update (iOS 5.1.1) I click update, it downloads the file and away it goes. I left the computer as this happened, it automatically went to install and when I came back t
-
How to find out if the file is locked
Hello All: I've struggled with this for quite a while now. I want to move a file from one directory to another. I can choose to copy/delete or renameTo. Both works when I tested from a console test app. However, this is part of a big Swing app of min
-
hello, Can anyone tell how to make message no M3015( to enter tax classification in material master) as warning message instead of Error message. In system message in SPRo , this message is not showing , but while error is thrown with M3015 message