Spaces not appearing on menubar -- even if checked off in preferences to

"Spaces" is no longer appearing in the menubar, although checked off in system preferences to do so.
I have tried shutting down spaces and restarting, but this does not help.
I do not have yahoo gadgets that have been listed on the support page to cause this type of problem.
No other items have no appeared on the menubar.
Suggestions?
(Many thanks in advance)

Hi rl68, and a warm welcome to the forums!
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then...
Apple Menu Bar Icons Gone
You've probably got a couple of corrupt preference files.
In "/Users/<yourname>/Library/Preferences", delete com.apple.systemuiserver.plist
In "/Users/<yourname>/Library/Preferences/ByHost", delete com.apple.systemuiserver.xxx.plist where 'xxx' is a 12 digit (hexadecimal) numeric string.
This will reset your Menu Bar to the default, you'll need to go through System Preferences to reset the ones you need. (If they are already checked, uncheck them first and then recheck them).

Similar Messages

  • Direct sales line items not appearing in VF04 even if MIRO document created

    Hi,
    Some of the direct sales line item are mysteriously not appearing in VF04, even though the MIRO for the PO related to it is done. In some cases all the items of sales orders are not appearing in VF04 , in some cases it is happening randomly. Such items can be process manually through VF01 . Also if report SDVBUK00 is run , these line items are seen in VF04.
    Kinldy reply .
    Mamta

    Dear Uday Kumar Narayanappa ,
    I think as a consultant you have the say in deciding how the things should be mapped in SAP than the USER.
    I dont find any  reason other than having the same user id being shared between multiple users (and hence variant cannot be used).
    Anyways try this.
    Make a Z program copying VF04 .
    Give the Tcode which is agreeable for the users.
    In that Z program , write a code NOT TO CONSIDER documents of type ZNEW.
    Now limit the authorisation of this new program only to those users who doesnt not want to deal with ZNEW.
    Hope it helps.
    Thanks & Regards,
    Hegal K Charles

  • Spaces not appearing in the Dock

    I have gone to spaces in they system preferences and turned it on and also check the show in menu bar. The spaces icon, however, will not appear in the dock. Anyone know how to fix this?

    It's an application. Just drag it to your dock from the applications folder.

  • Apple software updates does not appear to do its automatic checks?

    I have itunes installed on two almost identical Windows 7 based PC's and I have noticed that on one PC the Apple Software Updates do not appear to do its job by checking for updates automatically. If I run the software manually it will show if an update is available and allow me to install it but I never seem to get prompted automatically by Apple Software Updates even though its set to check weekly.  My other PC does prompt.  Both PC's have pretty much exactly the same software installed including firewall.  Any reason why this would not appear to be working?  Any way of checking if its actually carrying out the checks?

    The reason I suggested moving the files to the Desktop is because if none of these files are responsible for the problem, you can then put them back--or at least put back the com.apple.systempreferences.plist file, which would have many things in it besides the setting for Software Update. If it is the cause of the problem it would be a good idea to replace it and redo your settings. But if it is NOT causing a problem you would not want to figure out what all needs to be reset, instead you can put the old one back. The two plists from the ByHosts folders can probably just be trashed, and new ones created when you reset preferences for Software Update, although the scheduler might do something else (I don't have many things on auto schedule so I don't know, the only thing in mine is Software Update settings).
    Francine
    Francine
    Schwieder

  • Fire fox will not save any passwords even after checking the save passwords box

    I don't know how else to say it, the save password does not work even after checking the save password box if I can't get it fixed I'll use some one else

    Go to Tools | Options and choose the Security tab from the Options dialog. Check the "Remember passwords for sites" checkbox. Click the Exceptions button to make sure the site you want to remember is not listed.
    From that point on, Firefox will record the username and password combination you enter for a site provided it can recognized those fields in the website form. If the username and password are not already recorded for that site, a bar will expand down at the top of the webpage below the page tabs asking you if you want to remember or ignore that new information. Clicking the Remember button will record that information for that site. When you visit that same form again, either the single recorded username and password should automatically appear in the form fields, or a drop-down list of choices will appear when you set the focus to that field. The choices can be filtered by typing the first letters.
    If the "Save password" checkbox you mentioned is displayed on the webpage, it is not a part of Firefox and is a function of the webpage of that site, so it does not affect the ability of Firefox to remember usernames and passwords for a particular site.

  • Touch zoom not working and I have it checked in systems preferences

    need help on Lion touch zoom, not working and I have it checked in systems preferances.

    Mine is even weirder, but maybe I can help.
    First, a number of people are reporting that the zoom feature seems to stop working after the computer goes to sleep.  You get it back if you reboot.  However, a simpler solution is that you can move the cursor to a screen corner - one you have set up to start a screen saver - and when you move the cursor away to stop the screen saver, the zoom works again.  Still a bug, but fairly easy to deal with until your computer goes to sleep again.
    Mine is really weird because, as I was working to try to get zoom to work before finding out this other stuff, somehow I ended up with a situation where if I turn on zoom, the screen instantly zooms and I can't get it to unzoom except by turning off zoom.  However, even though zoom is then turned off, I can zoom the screen as if it is on!
    So, besides trying the trick of activating the screen saver, you might try turning off zoom and see if it will still zoom.

  • White spaces not appearing

    Hi.
    The last field in the file is not populated to its fullest length and extra spaces from the last field are removed automatically when we download file from XI application server.Example : If the last field is of length 6 and the output would be fine if i fill Pass123 but if i fill Pass1 then the output would appear as Pass1 but i need the output as "Pass1  ".
    Please let me know the solution.
    Regards,
    Sidhvin

    U may try to concatenate the string Pass1 with two spaces "  ". By the way, what is ur scenario?
    Regards,
    Prateek

  • Logical System is not appearing in Informer tab to check SOD's

    Hi GRC Experts,
    I have an issue with logical system to run risk analysis.
    I created logical system by following the Config guide, added physical system and generated rules (RAR Configuration>>Logical Systems>>Generate Rule) for that logical system.
    I haven't generated rules for the physical system (RAR Config>>Rule Upload>>Generate Rules) since I dont want more rules to be displayed in the reports.
    However I do not see logical system as an option in Risk Analysis (informer Tab) and Config>>Schedule background job for BAtch Risk Analysis>> under system as well.
    It would be great if any one advice me on this.
    Regards,

    Thanks Chinmaya,
    Yes you are right, I confirmed with a friend (my ex-GRC colleague) of mine as well.
    can't execute sod checks on a logical system - logical systems are only intended to eliminate the need to add the same rule set over and over for the same types of systems
    Regards,
    Ramesh K

  • Menus do not appear (via menubar, bookmark toolbar or right-clicking)

    I just noticed the other day that my menus are no longer appearing in Firefox. I can see the File, Edit, etc. menu bar, but clicking on the word File does nothing. Pressing Alt+F also does nothing. Right-clicking in a web page doesn't show the usual popup menu. Clicking on things in the toolbars (like bookmark folders) don't show the menus.
    I tried running in safe mode, but there is no change. I tried creating a brand new profile but the behaviour is still the same. Most of the troubleshooting steps recommend to disable acceleration, but I don't think this applies - for a start they all say to go to the Tools menu and I can't do this, but opening about:config there doesn't seem to be anything relevant in gfx.*
    When I launch Firefox from the Linux command line, it says this a dozen or so times:
    (firefox:5116): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
    Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    However this is nothing new - it has always worked before.
    dbus appears to be running:
    $ ps -A | grep dbus
    690 ? 00:00:00 dbus-daemon
    1173 tty1 00:00:00 dbus-launch
    1174 ? 00:00:00 dbus-daemon
    What's going on? Why have my menus stopped working??

    Thanks for the response!
    It's via my distribution's repositories. 64-bit. I just downloaded the version from your link above (14.0.1), which turned out to be 32-bit, and there's no change. I don't get any D-Bus errors on load (only some complaints that a 64-bit plugin was the wrong ELF class and couldn't be loaded), but I still can't make any menus appear. I also tried downloading Aurora (16.0a2) with the same result.
    The system requirements should be fine as I have been running Firefox on this machine since I bought it a few years ago, and being quad core with 8GB RAM it should be well above the minimum specs needed.
    I'm thinking it's a bug that has been introduced somewhere along the way. Any ideas how I can troubleshoot?

  • Is there a way to customize sticky notes to have "form" content or check off lists that can be added?

    I am looking to see if there is a way to create "form" sticky notes that I could chose the form and it pre-loads certain check lists or certain information on that sticky note - to help everybody put info that needs to be put on a particular document on that document. 

    Hi Tim,
    The scenario here is not clear to me.
    You cannot customize sticky notes, except those mentioned in the sticky notes properties.
    It seems to me that you are referring to shared reviews here.
    In that case you might want to check the docs:
    http://www.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-send-pdf- for-shared-review-tutorial-ue.pdf
    http://wwwimages.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-com ment-in-a-pdf-file-tutorial_ue.pdf
    Regards,
    Rave

  • GPS does not appear to work with data-roaming off and no wi-fi network

    I have been using an application called imarkmyspot to produce way-points for synchronising with my camera. When I am in my home country this works fine and a GPS location is found quickly.
    I've recently been abroad and had data-roaming turned off to avoid high expense. The point is that in this situation the GPS does not work (with imarkmyspot or Goggle Maps) unless I can access an open wi-fi network.
    So my question is, is this correct? Does GPS only work with either data access on or when within range of an open wi-fi network.
    If this is feature (bug) of the iPhone then this makes applications such as imarkmyspot rather useless when travelling. Alternatively it could be imarkmyspot that has this problem of course. But I'm quite sure Google Maps did not work either in this situation either.

    The iPhone's GPS does work without a data connection.
    Two weeks ago on a work-related trip I knew I'd be traveling a rural highway that would leave me without data/voice from any source for at least 45 minutes (no GSM service). Before leaving a city with data, I zoomed out using Google Maps far enough to show most of my route, then "nudged" the map so the application wouldn't try to get a data update for the map. I simply used the top power button to turn on and off the screen. The iPhone and GMaps tracked me through for the entire blacked-out section of my trip - I made sure the device had a decent view of the sky and it got a fix and nailed the location within a few seconds.
    Ironically, I'm returning that device in the next few hours for an exchange. The GPS hardware, it seems, has failed about a week ago - the device gets A-GPS fixes now (it shows the nearby 3G and EDGE towers), but won't lock in for more than a second or two. My iPhone's GPS worked, and now it doesn't - AppleCare told me my GPS hardware has failed - and you're may be exhibiting the same failure.
    Some A-GPS devices use their sources to get close by - like my TomTom GO and the ephemeris files it grabs from their servers to get updates on where satellite locations are - and then use the on-board chip to nail the device's position. From what I understand of the iPhone's assistance mechanism, the data tower's and Wi-Fi physical location needs to be correct and available in an accessible database somewhere - my iPhone was showing me near Houston TX (2200 mi/3500 km distant from my actual location) when using 3G data until the data source was updated.

  • ATP Error-production order details is not appearing in ATP check

    Hi ,
    As per the details which I updated, production order details are not appearing in Sales order ATP check.
    Pls help me to solve it ,the settings needed to do in the system.
    Thanks,
      Vijesh

    Hi,
    i checked the configuration, it is same as you said, but still the production order window is not showing in the ATP check.
    thanks to  help.
    Regards,
    Vijesh

  • GL Open Item does not appear in F-03

    Hi Friends,
    I am trying to clear the GL open items thru F-03, while I see all the open items that appear in Line item display through FBL3N (total 25), out of them only 24 appear in F-03, I can not see the 25th item.
    I have checked the document in BSIS table, it appears as open item there. The FBL3N also shows this open item.
    What could be the reason that when going for Clearing thru F-03, it does not appear.
    Best Regards
    VK

    - Check some table fields in the missing documents using Transaction SE16. The following conditions must exist for the missing document numbers in question - 
    BSIS-XOPVW = X      (Indicator: Open item management, only for G/L                     accounts)
    BSEG-XOPVW = X      (Indicator: Open item management)
    BSEG-AUGBL = space  (clearing document number)
    BSEG-DISBN = space  (discount document number)
    BKPF-BSTAT = space  (document status)
    BKPF-XSTOV = space  (indicator reversal flag)
    REGUS/REGUP -> see below
    - Check Note 136754 - F-03, F-32, F-44, F-28 missing open items (link below)
    [Note 136754 - F-03, F-32, F-44, F-28 missing open items|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=136754]
    Rgds.

  • Some Dowloaded music that is in Itunes Music Folder Does not appear in Itun

    I downloaded about a dozen songs from itunes yesterday. Four out of twelve songs do not appear in itunes.
    I checked and these four missing songs are in my purchase history, these songs are in my itunes music directory on my windows xp computer and I have the most recent version of itunes?
    Any other suggestions?
    Thanks!
    Karen
    Dell Inspiron 700m   Windows XP  

    My music is not there.  It is, however, showing up on my main (MAC) HD, not my external drive.  I think that I might have deleted the external drive copy instead of the local HD copy when I was trying to open up disk space.
    Is there a way to scan the MAC HD aside from spotlight?  When I look under about this mac->storage, I see that all 64GB of music remains on my main HD, but when I run searches in the finder for MP3, MP4, or by band name, I cannot find anything.

  • My voice mail messages are not appearing as they are left. Often no voicemails show up until 4 weeks after they have been left

    I am having trouble with my voice mail on the iPhone. The voicemails are not appearing until 3 even 4 weeks after they are left by a caller. Last night 10 voice messages came through all at once, one left before Thanksgiving. Is this an iPhone issue or an issue with the carrier?

    I'm having the same issue. It began three or four days ago. I'd notice that I'd miss a call but the person wouldn't leave a message.
    Two days later, suddenly three or four new voicemails will pop up from the past couple of days. The time stamp on the messages is correct-- it will show that the caller left the vmail a day or two before.
    Also, in what has to be a related problem, some of the voicemails appear to be corrupted and cannot be played.
    I have a 4s and my software is up-to-date. I have made no material changes to my phone, other than automatic software updates to explain this.
    It's enormously frustrating and as a job seeker, I can't afford to miss voicemails. Does anyone know if this is the phone or the carrier (AT&T)?
    Any help and input will be enormously appreciated.

Maybe you are looking for