Spaces Not Displaying for Members

For some of our users the spaces they are members of no longer appears on the spaces page on the home space or in the spaces list. This is also occuring for newly invited (non-spaces users). No changes to our production environment in he last six months except a security certificate update.
Anyone seen this before?

Could it be that those spaces are public?

Similar Messages

Values not getting displayed for members which doesnt have parents

Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......

Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle

Material Description is not displaying for few records in Report

Dear Experts,
Report Material Description is not displaying for few records in Bex Report but for records it is coming and even the heading of the material Description is also not coming for this report.
Cud u plz suggest a good solution for it.
Regards,
Sai Phani.

Hi Phani,
For the text of the material in records, check if there is text maintained for that material in the master data. also try by changing the text to medium text and long text.
regarding header, you will have same heading for key and text, you may use Materail ID / Description as the heading if you want.
regards,
Rk.

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Overnight, text body of emails will not display for messages in inbox-only the from and to and a subject line displays. Draft messages in Ipad display fully. Inbox emials display fully on my main Dell computer and my Iphone. Any ideas? Duanekot

Overnight, the taxt body of emails will not display for all messages in the inbox. Only the From and To and a subject line display. All messages in my Draft Mailbox display fully. Also, all emails in my Dell laptop and my Iphone display fully. Any ideas?? Duanekot

See if this helps .... Reset the iPad.
Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider bar - let go of the buttons and let the iPad start up. Then check your emails.

Contact Names Not Displaying for My Conversations ...

Hi Contact Names are Not Displaying for My Conversations in C7.
I took C7 in April 2011.Suddenly today (July 26th 2011).Names are not displaying and also my mobile became very slow when accessing ..
Please tell me what to do

You are welcome. Please resolved the thread?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Link Button Not Display for Tax Amount

Hi Experts,
I have one Problem
I am creating A/R Invoice Document and I have assing Tax Code for Item
It will show Tax Amount but link button or drill button not display for tax amount
pls give me solution
Warm Regards,
Sandip Kokate

HI
How to Clear Chumb
And I am Selecting Tax Code but still it will not show Tax Amount Link button but Tax Amount is perfectly Match
Regards,
Sandip kokate

CUCM: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls

Hi Team,
we are running CUCM 9.1(2a),
we have integrated Third Party SIP Phone(Avaya 1230 SIP Phone) with CUCM,
Issue: Third Party SIP Phone "Caller ID" is not displaying for outgoing calls, we are able to see only the dailed Number,
When "A" calls to "B", "A" can see only the dailed number of "B" but not the "Caller ID"
Regards
Ananthakumar

Are A and B both Avaya phones?
So it looks like you're not seeing the alerting name/connected name getting updated then? Do you have alerting names configured on the directory numbers? Might need to take a look at the SIP messaging to see if the alerting name/connected name is being sent to the Avaya phones and maybe they just aren't displaying it. Might just be something that needs to be tweaked in the 46xxsettings.txt file.

Value BLANK/SPACE not valid for cost element "Fund"

Hi!
We use funds management in our solution. It has worked fine in development but when doing the module tests we get the following error when creating a shopping cart:
Value BLANK/SPACE not valid for cost element "Fund"
When creating a PR in backend we do not get an error. So it should not be a problem in funds management.
Everything works fine when using BBPSC01 (central)
Any ideas?
Sincerely
Anders
Edited by: Anders Öhrling on Sep 29, 2008 11:33 AM

Ple provide the solution for Problem Resolve.

SSAS Date Dimension attribute not displaying all members when browsed singly

I have an SSAS Cube database that holds data from 2009 to 2013 (5 years)
There is a Date Dimension in the database which holds a "Calender Period" Hierarchy with the attributes CalenderYear >> Quarter >> MonthYear >> Day .
I am connecting to the cube via Microsot EXCEL
Whenever i try to browse this hierarchy alone in the spread sheet, the first attribute as per the hierarchy shown above i.e. Calender Year does not display all the members, that is confusing the users to assume that the cube is not processed with the latest
data, which is not the case. However as soon as i try to browse any measure with this dimension, the data automatically shows for the latest dates of 2013 as per the expectations.
The perspective that is selected while connecting to the Cube in this case is the one that is by default the one including all the Cube Objects.
Whenever i try to browse the same cube for the same Dimension Hierarchy but in a separate user perspective i get the latest three Calender Years i.e. 2011,2012 and 2013 but not the complete years 2009 to 2013.
When i was browsing this earlier by the original base perspective (which has all the cube objects visible) the Calender Years displayed were 2009,2010,2011&2012 but not 2013 which should be there.
I checked the base view in the DB that is used to create this Dimension, that is fetching the complete data for 2009 to 2013.
I have also verified that this issue is still there if i try to browse the cube from the SSMS.
Can anyone help me to get all the years from 2009 to 2013 (the years for which my cube has data) become visible as soon as i drop it alone into the Spreadsheet?
Thanks
Suvrat

Thanks for your response Muthukumaran.
I did not know about this default measure property of the SSAS cube, it would be nice if you could also tell me how to check which is the default measure for a cube.
I understand your point that if a particular measure group does not have data for a year then that particular year will be skipped as per the default excel settings, which when disabled allowed all the years to be displayed, but in that case every time the
users connect to the cube via excel, they will have to configure this property.
I would like to share the way i resolved this issue:
I went ahead and simply did a Process Full for the Date dimension. The years started to display by default as per the expectations. Now after observing this change, as per my understanding I believe this issue was due to the CACHE of the cube not being updated
for the date dimension. As after each incremental load of the DWH we processed the cube & while processing the cube the dimensions were set for a Process Update and the Measure Groups were set for a Process Full. This caused this issue, and we could resolve
this once the Date Dimension was processed full.
Thanks
Suvrat Rai

Data not displayed for Key Figure of MultiProvider

Hi Folks,
I have created a Query on MultiProvider which is actually copied from another Query(based on InfoCube) using RSZC. Now I have the problem with display of data for a KeyFigure in report. No data is displayed for the KeyFigure. The MultiProvider has Two InfoCubes where the KeyFigure is related to one of the two Cubes. The data is shown at the MultiProvider level. I have also checked for a new query on the same MultiProvider. Here too the data is shown in the report for the KeyFigure. But it's not showing in the Query which is copied from another.
Any assistance on the same is really appreciated.
Thanks,
Raju. Dupadally

Hi Diaz,
Thanks for your answer. Could you make it understandable. I haven't understood fully.
Thanks,
Raju. D

Fixed values of dynamic attributes are not displayed for bid response

Hi
I have created a bid with dynamic attributes and have weighted the options with fixed values. I publish the Rfx (bid) and all is ok. The problem is that the fixed values are not displaying when doing a bid response.
We are using SRM 7.0
Can anyone help?

No. Not yet. I think it is a bug. You should create an OSS message to SAP and ask them to pay special attention to the following code block:
Class: /SAPSRM/CL_CH_WD_DODM_DYNATTR
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
At the end of the method, look for code context:
IF lv_object_type = c_qte.
*Set the Fixed Values Table to Invisible
lv_visible = abap_false.

Parent child relationship is not displaying for IDOC_OUTPUT_ORDERS (PO)

Hi,
Can somebody help me the reason why parent child relationship not displaying properly for ORDER05 basic type?
If we go in details about the problem, a purchase order is creating in R/3 through EBP. To modify my requirement I am using userexit EXIT_SAPLEINM_002. Here I am appending the records in the segment for E1EDKT1 and E1EDKT2. IDOC is creating with an error of status record 26.
When I check in the transaction WE19 for the respective IDOC the data is showing correctly for all the segments including e1edkt1 and e1edkt2 segments and also I check in the table EDID4 segment number is showing correctly and the for the segment E1EDKT2 PGNUM also showing correctly, but when I see the IDOC in the transactions WE02 unable to see parent child relationship between E1EDKT1 and E1EDKT2 segment. Simply the data is displaying one below other like other segment.
I don't know the reason why it is displaying like that?
If anybody is having the solution is highly appreciable.
Regards,
Noorul

hi hassan,
When you are appendng the REcods which belong to the purticular segment..
all the segment needs to be appended in in the proper order as in the WE30..
I think you are appending the segment E1EDKT2 at the end of the EDIDD.. or IDOC_DATA in the user exit.. .. eventho no eerror will be displayed but idoc will generted with sataus 26 .. if check the STATUIs Recored u ewill find the SYNTaX ERROR.
Sollution for ur probelm is... don append the E1EDKT2 at the lastr instead you ahve to insert the segment E1EDKT2. only afer E1EDKT1....
Tehn you r problem will be solved.. I had faced the Same proble when i worked on material maser idoc..
Close this thread if when u r problem ise solved
Reward if helpful
Regards
Naresh Reddy K

Thumbnails do not display for some images

I have a large library with over 65,000 images.
In some albums and projects the images fail to display in the browser....see here for an screenshot
http://picasaweb.google.be/lh/photo/tOj7FY4lclLxr8YMEBV8ZA?authkey=_Zrhrl8QDyA
If I go into filmstrip view I can make them appear but this does not seem to stick...ie when I quit and restart aperture the same images fail to display.
I have tried selecting and "generate thumbnails" as well as "update previews" and whilst it chunters away working on it for quite a while the images stll persist in not appearing.
Suggestions?

Sorry to hear that....I still have no really good news. What I did notice is that if I enlarged the thumbnails above a certain size then they all displayed....but once they dropped below a certain size the ones that did not display, stopped displaying!
This was so boring that I deleted the entire project (after doing an export, including masters) and then imported the originals again.
Now everything works fine...but of course I have lost all the tagging and adjustments that I did since importing....so I am not happy at all....but at least I do have a working library.

Buttons are not displayed for the first time when drawImage method is used

Hi
In my swing window 2 buttons are there and when clicking these buttons, it should display an image . The two buttons are displayed at the first time and I can click on it . While clicking a button , the corresponding image is also got displayed. [ I am using drawImage() function for it] But what the problem is, then the two buttons are not displayed and it will be displayed again when the mouse moves along the position of these two buttons. And this problem occurs only at the first time..When they are on the window on a second time, they won't vanish when the image is displayed when clicking it. Is this the problem with paint() method?. I am using start() method also.
Please help me!
Thank You

Hi
This is not my exact program, that has a large no: of code. So I am putting here a sample one. One thing I would like to point out is that , I can see the buttons at the time of loading the applet and suddenly it vanishes and the image is drawn. Then if I move the mouse along the position of these buttons , they got displayed.
import java.awt.*;
import javax.swing.*;
/*<applet code = MyClass width = 500 height = 500>
</applet>
public class MyClass extends JApplet
Image img;
JButton b1,b2;
Container cp;
Canvas1 cv;
class Canvas1 extends JPanel
public void paint(Graphics g)
super.paint(g);
g.setColor(Color.black);
g.fillRect(0,0,500,500);
img = getImage(getCodeBase(),"image1.jpeg");
g.drawImage(img,20,20,this);
public void start()
cv = new Canvas1();
cv.setBounds(0,0,500,500);
cp.add(cv);
public void init()
setLayout(null);
cp = getContentPane();
b1 = new JButton("Button1");
b1.setBounds(1,1,100,30);
cp.add(b1);
b2 = new JButton("Button2");
b2.setBounds(200,1,100,30);
cp.add(b2);
It would be very helpful to me if you could fix the problem.
Thank You.

Spaces Not Displaying for Members

Similar Messages

Maybe you are looking for